👇KWI Welding School kwi.us

This was great. Straight to the point and learned quite a bit. Keep him coming back.

Even if you can use your left or right- you most definitely can find yourself in a bind. Never underestimate the opportunity for a foreman to place you on a weld that is damn near impossible.

This guy is one of the best, Humble & genuine person

That was so fast, I’m taking these test this week at work along with some MiG and flux, can’t wait to get it over with and move up to top pay! That’s exactly how I tig my monsters out works everytime

Worked with him on a 2 year job in the Virgin Islands. Great welder and an even better guy! Proud to see you doing so well, Kegan! 🤘🏼

Well done, Kegan! I weld in industrial boilers and I use the same methods. Not breaking arc when Tig welding saves you a ton of time! Just wanted to let you know i enjoyed the video. This is very helpful real-life welding instruction that will make anyone who does it a much better tradesman.

Very good freehand tig welding. I have learnt a lot.

You remind me of a guy that I worked with years ago! He was 2 to 1.He did 2 joints to everyone elses 1.It was more about his efficiency,and you could walk through at the end of the day,and know every joint he did,they looked like robot welds! Thank you

hes pretty badass learned alot from this video alone. Good shit weldtube and kwi

WeldTube, This made me laugh so much! Thanks for sharing!

Kegan you the man

i wish i had this guy as my welding teacher

WeldTube, I loved this video so much, I had to hit the like button!

I like your style to weld brother.your so fast.watching from the Philippines.

This guy loves what he does!

Great work sir you are awesome ❤️ 😊

Been so long thank u guys for uploading

Shallower bevels help speed up the process too, as long as you're staying within the included angle requirements of the WPS (typically calling for an included groove angle of 60-75 degrees)

Pretty good vid that stick is gonna help me out a lot

Nice weld very informative

Verdiğiniz bilgiler için çok teşekkür ederim yeni öğrenen Kaynakçılar için çok güzel olmuş. 👍👏👏👏

Love it .. nice .

that dales kid is the best of the best 😮‍💨

120 for 3/32 seems pretty frickin hot.you obviously handle it awsome

good job alot of tests ive done was time limited 4 hrs monster coupon root to cap and on some jobs restricted with no grinders just a file and wire brush

That’s how I do all my test qcs will be blown away how fast you put that root in

Wow that's great advice I just started welding I'm going to get a tig torch for my welder.

This dude is sharp ole son! 👏🏻

It's a pity I don't live in the United States, I would have had the opportunity to work with such good welders as Kegan. Great job, it's clear that the guy has a job in his hands.

Very nice👌👍

What's the over under on how many redbulls Kegan drank before the shoot? 😂

Very good video

Looks great, solid, and real efficient. Only thing I wonder about is would the qc guy not say anything about all the start stops lined up? Forgive my ignorance but I legitimately want to know. I’ve always been told to stagger them and have seen people busted out for that but only by a specific cwi at trade school during AWS cert tests. I’m always looking to learn something new.

Very good ❤❤

How many red bulls old mate had? getting anxious watching. He hustling good.

Good lord , that root is heavy as fuck! Lol

This guy is just badass

As few passes as possible.. I say 1 weave cap pass is good 😂 great video man

Weld 🧙 wizard right here!

Nice video what is still lay wire like that if you were using -2 wire

Why did you use 1/8 filler wire instead of 3/32 wire? On the 3/32 lay-wire technique just curious dose it push more filler wire into the root so the root isn’t flush?

Nice video.

Beast 🔥💯

Amateur hobbyist here. Whats the difference between TIG welding root vs using 6010?

Good job sir you're a beast! Explained the process perfectly 👌 👍🏼

Kaynak maskeniz çok iyi görüntü 10 numara ❤

What about interpass temperature on the coupon. Also can we see the.graphs 😄

Just remember, passing a test is only a license to perform your 1st weld for an employer and all bets are off for passing or satisfying the specification/Coder for every weld after 1st!!

Question....does it matter when you weld pipe how much weld convexity you have inside the pipe? Ive heard too much sometimes may disturb gas flow and or create turbulence in the pipes pressure, any of this true?

I'm not a welder, i have over heard in the past about having to let things cool to keep the inner temperature below a certain level. At what point do you have to worry about that before letting it cool for the next pass?

I use to be a Boilermaker. After coal went to s***, I withdrew from the trade. Is there a demand for tube welders anymore?

Good

This dude legit

Great vid Kegan, Carlos here bud, this man is quick in the field. Glad you’re doing well brother, don’t forget Rocky and bull winkle in Tulsa, Oklahoma last year t/a!!! God bless🫡 🤘🏼👏🏼 🔥

Whats the tolerance if you weld a spool and due to weld shrinkage your overall length is shorter than it should be for the fit up

It’s useful video. I’m a welder. I always use my right hand. But I would to use left hand. Could you give me a few techniques?

Can never get penetration with the lay wire technique in my root. I always have to dip keyhole

Senior welding comp at the end wouldn't it make more sense for youth? Idk maybe my thinking is dumb but just a thought

تحياتي لك من مصر

Also alittle landing with that 1/8” gap will help as well. Especially on the bottom half.

What Saftey glasses are those

Brand of Saftey glasses he is wearing ???

World class muscle memory.

Lot of places will not let you weave at all with 7018 they want stringers only

Bon Boulo😆😆👍👍

Telling all the secrets 😂 might as well tech the flick the booger on the root 💯

بتوفيق أن شاء الله

For a test don’t you wanna spread the heat out and let it cool in between. Like I get trying to do it fast. But couldn’t fast keep too much heat in the part and run a risk of over cooking the steel and making it brittle?

Hey weld tube I have a song where i mention them

How often do you have to do a weld test? I thought you take the test then you are certified.?

Is back purging unnecessary in this application?

30:00 tig out with laywire technique

Odlican s obe ruke radi poz iz Hrvatske

Would you guys ever take a look at filler metals? Looking at different codes and what’s required for certain filler metals like T-8 welding wires vs T-4? Why it’s used in seismic zones, etc? Also going in depth with engine driven welders on a suitcase, which is a profound thing for welders on structural jobs, a lot of new guys simply don’t have a clue because in school they teach you off a miller XMT with 10’ of brand new cable, you don’t have to account for much voltage drop off, but in the field you might have 150’ of corroded cable on your machine so when you set it at 22V, your really only getting 18.5V. Videos not for people in school, but people who are breaking out and have never seen this kind of stuff in school. Also, you know how you guys do mock up plant work? You also should do a mock up pile splice for both pipe and H piles, except you have the students rigging, using hand signals they learned from the course to get their pipe or H piles on location, then welding it and doing a mag particle test. It would be a process that would really prepare new welders for what’s to come, especially rigging and crane hand signals.

I have 15 years experience in weldeing job

I agree that good welders are amberdexrious

👍

I don't understand "popping off" at the end of the weld like that. I think it's because I don't understand your use of "fisheying" with this. In my mind, lack of postflow at the end of a weld on steel seems like it would be a problem.

29:27 recap on how to

Great teaching moment. What ever happend to Stan click..

Took ya 9 minutes to do that root pass 😉 😜

Nice ! D'un soudeur français

애기였던 때가 한 6년전이었는데 많이 컷네 ㅎㅎ 보내준 용접면 좀 쓰고 나오지

Thanks for the upload. #MAGA2024 #Nov5

hey man, why dont you let the gas blow on the weld a bit more in the end?

He isn't making any money on this,its actually costing him money,30 an hour,minus 1/3for taxes the gas to get there the hotel,eats

Be a both hands welder make you more money than a single hand welder? Wait for answers

To many over think it

It’s a tube

Really good! But slow down man, you are moving and talking at a 100 mph. You are teaching us, not racing us.

Kegan is my boyfriend

you know I'm better than you, help me go to America, so I can tell you that you're better than me, Filipino welder best in the world🤣🤣🤣🤣

To much talking

This one held welding is cool when you're younger. Try that shit when you've been welding 25+ yrs.,in the end it don't really matter cus through out the yrs you've adjusted to the process.