Is This The Holy Grail Of Ceramic Coatings? NEW DuraSlic Holy Grail

Рет қаралды 48,939

Күн бұрын

Is this the Holy Grail of ceramic coatings? NEW DuraSlic Xtreme Holy Grail. In this episode, I review the new DuraSlic Holy Grail ceramic coating, a 5-year semi-permanent protection for your vehicle. We also do a demo so you can see its application and results!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
✅ DuraSlic Xtreme Holy Grail ceramic coating: www.duraslic.com/pan-the-orga...
✅ DuraSlic maintenance products: bit.ly/3sSnSdu
✅ If you want to join the DuraSlic Professional Detailer Training, click here: bit.ly/3DaJZSf
✅ If you want to find a DuraSlic authorized installer near you, click here: bit.ly/3HO3nDf
Inspection light: bit.ly/3BYLnpf
Microfiber towel for levelling the coating: bit.ly/4289Oeo
Microfiber towel for final buffing: bit.ly/3FuRx1L
Watch more of my videos:
✅ DuraSlic DS 1500 Xtreme ceramic coating review: • A ceramic coating with...
✅ Discussion about ceramic coatings with DuraSlic chemist: • Ceramic Coating techno...
✅ DuraSlic FlowX ceramic top coat review: • NEW DuraSlic FlowX Cer...
✅ Application of DuraSlic Holy Grail on an Audi Q7: • First Wash 2023 Audi Q...
✅ 2022 Car Detailing Products Awards: • 2022 Car Detailing Pro...
✅ DuraSlic Xtreme Holy Grail features:
- 5 years of claimed durability (durability depends on factors like surface preparation, application, maintenance, conditions, weather, mileage, etc)
- it combines the signature durability and repellency of DS 1500 Xtreme with the low sliding angle and slickness of FlowX
- it has a new haze flash system which allows installers to easily track progress and keeps installation simple
- it can be applied to paint, glass, plastic trim, wheels and lights (not recommended on chrome surfaces)
- it provides UV protection
- no topper is needed, however if you feel the slickness and hydrophobics are starting to diminish a bit, you can use FlowX as a maintenance topper
Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZfaq, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my KZfaq videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
Timestamps:
0:00 - Intro
8:32 - What’s in the box?
9:37 - Application
13:39 - Final results
15:48 - Maintenance
16:21 - Final thoughts
#DuraSlic #HolyGrail #CeramicCoating #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Пікірлер: 404

@PanTheOrganizer Жыл бұрын

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ ✅ DuraSlic Xtreme Holy Grail ceramic coating: www.duraslic.com/pan-the-organizer/ ✅ DuraSlic maintenance products: bit.ly/3sSnSdu ✅ If you want to join the DuraSlic Professional Detailer Training, click here: bit.ly/3DaJZSf ✅ If you want to find a DuraSlic authorized installer near you, click here: bit.ly/3HO3nDf Inspection light: bit.ly/3BYLnpf Microfiber towel for levelling the coating: bit.ly/4289Oeo Microfiber towel for final buffing: bit.ly/3FuRx1L Watch more of my videos: ✅ DuraSlic DS 1500 Xtreme ceramic coating review: kzfaq.info/get/bejne/gNCEYNuBlt29iac.html ✅ Discussion about ceramic coatings with DuraSlic chemist: kzfaq.info/get/bejne/d56GasJ53tnKp3U.html ✅ DuraSlic FlowX ceramic top coat review: kzfaq.info/get/bejne/frCkoMKAmODMeok.html ✅ Application of DuraSlic Holy Grail on an Audi Q7: kzfaq.info/get/bejne/qp14dqWEu9TNqoE.html ✅ 2022 Car Detailing Products Awards: kzfaq.info/get/bejne/nbinpt2f3My4p3k.html

@ChainsawChristmas Жыл бұрын

The website says the MSRP is normally $175, but Pan's subscribers get a special discount price of $189. 😂 Thanks for the discount.

@The1Music2MyEars Жыл бұрын

@@darylcooper5481 why does this require a class when it's the same application as any other ceramic in a bottle?

@SAGITTARlUS Жыл бұрын

@@The1Music2MyEars maybe so they doesnt get sued by american customers🤷🏻‍♂️ through this they would have proof the customer should know how to apply it

@ChainsawChristmas Жыл бұрын

@@darylcooper5481 you don't have to defend a typo on their website.

@YuriyBk Жыл бұрын

So then sell it for msrp price

@dansanders340 Жыл бұрын

@@The1Music2MyEars lmao ikr, diamond protech's professional grade basically just means there's a curing time and that it needs to be installed indoors, lol. But like the other reply said, it is a liability issue for sueing since people would try to get their mistake montarily paid for, not only get fixed, but to have a debatable number for the time their car wasn't looking right, lol. Plus most people dont know about cars so they would kind of be freaked out, not knowing that the coating can be removed, 😂

@TheCarDetailingChannel Жыл бұрын

These companies keep improving and raising the bar. I love it. The hazing is an interesting feature that will definitely help some people that find it hard to determine when to level the coating. Thanks for the overview Pan

@KevinAClassA Жыл бұрын

That's two stand up guys I know, Pan and Brian. Absolutely two very fine gentlemen in the business. Thank you for sharing your content Pan, have a great week. Stay safe my friend.

@PanTheOrganizer Жыл бұрын

Thanks Kevin! I appreciate it!

@Maggie-tr2kd Жыл бұрын

You always do an outstanding job with your product reviews and demos. Thank you.

@PanTheOrganizer Жыл бұрын

Thanks Maggie!

@bulletproofbubbles6915 Жыл бұрын

I've been installing for these guys since summer 2020. Customers are nothing but happy! And my personal vehicle looks like a dream!!

@PanTheOrganizer Жыл бұрын

Awesome, good to know! Thanks for sharing your personal experience.

@duraslic Жыл бұрын

We appreciate you, Delwin!

@neilwalker5041 Жыл бұрын

Awesome coating here which and their other coatings have held up very well in other tests. The gloss and slickness are going to stand out and it looks like the initial buff time is long enough to make installation less stressful. Thank you Pan for a stellar Saturday video. People would be wise to buy this coating at home.

@PanTheOrganizer Жыл бұрын

Thanks Neil!

@bouchikhimohamed9416 Жыл бұрын

thank you so much, always your are the first ho given as the new products. thank you PAN

@PanTheOrganizer Жыл бұрын

😁👍🏻

@davymahieux2662 Жыл бұрын

Wouah ! Magnifique ! Merci Pan pour cette nouvelle petite pépite qui sublime le véhicule et qui met aussi en avant tout le travail effectué en amont. Une belle signature.

@PanTheOrganizer Жыл бұрын

Merci !! :)

@davidolson6909 10 ай бұрын

Just bought and applied the Duraslic Xtreme HG with your link and topped it off a week later with Turtle Wax Graphine Infused Flex Wax…OMG…the slickness is literally unbelievable. I don’t say that lightly as I have been following you for years and using almost all of your tips and tricks. Thank you!!

@PanTheOrganizer 10 ай бұрын

Awesome!

@stevejordan9567 Жыл бұрын

I just bought this for my black 4Runner. Can’t wait to give it a try. I’m sure it will be great. Thanks Pan.

@PanTheOrganizer Жыл бұрын

Good purchase! Enjoy!

@eamonkelly2792 Жыл бұрын

Hi Pan, that gloss looks awesome, great review as always, have a great weekend 👍

@PanTheOrganizer Жыл бұрын

Thanks!

@YuriyBk Жыл бұрын

“For a limited time, Pan The Organizer Subscribers can take advantage of DuraSlic XtremeHG at a reduced price! XtremeHG usually has an MSRP of $174.99, but we’re giving Pan fans a special discount.” But when adding to cart and going to check out its $189.99????

@duraslic Жыл бұрын

Our apologies for the confusion on this. The $175 product MSRP which showed up in that initial hour of the launch was an error. The product actually doesn't have a suggested retail price, as it is only intended for our professional network, plus this fantastic Pan the Organizer audience for a limited time. We appreciate your support and patience with a small human error which was quickly fixed.

@cuh720 Жыл бұрын

@@duraslic that’s a load of bull and you know it. Someone typed $174.99. Don’t lie now

@dakotasimon3445 Жыл бұрын

So glad to see this video! I saw their teaser and was interested. Interested to see how it performs

@PanTheOrganizer Жыл бұрын

Thanks Dakota!

@adrianfoosyd Жыл бұрын

Amazing I’ve been watching your videos from Australia for years now and just bought a new BMW and been waiting to chose my coating. Can’t wait to order it hope they ship down under.

@PanTheOrganizer Жыл бұрын

Hi Adrian! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 890,000 subscribers and we have over 115 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@chrisf8645 Жыл бұрын

Another great informative video. Thank you Pan!

@PanTheOrganizer Жыл бұрын

Thanks Chris!

@mikeabz Жыл бұрын

Amazing review, as always Pan! Thanks for bringing this to us and for making it available for us to purchase. I recently applied Glassparency’s Graphene Coating to my SQ8. What do think about applying this on top of that coating?

@martinluescher5009 Жыл бұрын

That's crazy!! The gloss on this car looked like something from a video game!! Great job !!!

@PanTheOrganizer Жыл бұрын

Thanks for watching Martin!

@martinluescher5009 Жыл бұрын

Thanks for providing us with great advice!!

@vikingvideo8561 Жыл бұрын

I'm really enjoying your content. Thank you. I got HG in the mail a few days ago but I need more preparation before installing. Car is brand new going on 3 months without protection! Could or would you recommend an easy to apply and easy to remove paint protection to use temporarily while I'm getting ready for the HG install?

@maximusterrellius7183 Жыл бұрын

hell yeah. Thanks for the coating availability Pan!!

@PanTheOrganizer Жыл бұрын

Thanks for watching!

@maximusterrellius7183 Жыл бұрын

@@PanTheOrganizer you're welcome!

@haroosudra4081 Жыл бұрын

thanks Pan,I always learn new tricks from very informative videos.Any suggestions on maintenance wash ups?

@PanTheOrganizer Жыл бұрын

Maintenance is as simple washing with a pH neutral wax-free shampoo. And once every 2-3 months, use a silica spray sealant as a topper, to boost the properties, although DuraSlic states no topper is really needed.

@richardseem7948 Жыл бұрын

Very well put together. Seems pretty solid. Not being negative but IMO very pricey. NOT a deal breaker.

@mikeholmed7029 Жыл бұрын

First time lve seen your videos. Im liking this coating and its simplicity to apply. I have a black car, and l think l need this in my life.

@PanTheOrganizer Жыл бұрын

Thanks for watching Mike. How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 890,000 subscribers and we have over 115 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@KonstaNykanen Жыл бұрын

I remember the Q7 video, the owner's reaction was great😂. DuraSilc offers some great coatings, the water behavior is on point👌🏻. Great video Pan!

@PanTheOrganizer Жыл бұрын

Thanks Konsta!

@KonstaNykanen Жыл бұрын

@@PanTheOrganizer 👍🏻❤️

@richardseem7948 Жыл бұрын

Awesome video and product review good friend

@PanTheOrganizer Жыл бұрын

Thanks Richard! I hope you are doing well.

@stevejordan9567 8 ай бұрын

I finally got my black 4Runner polished and coated with DuraSlic HG and it looks fantastic. It was my first time using my Rupes mk lll or any polisher for that matter. It took me around 12 hours to get it all completed. Thanks to Pan for giving me the confidence and how to videos to complete this on my own. I used the 3D one polish with the buff and shine ero pad. I tried to finish the buffing with Rupes uno pure and ultra fine pad but couldn’t see and better results so I skipped the final polish. Thank you Pan.

@PanTheOrganizer 8 ай бұрын

That's awesome! I know my viewers can do it if they watch my videos and take the time to do things well. And now you can apply any coating in the future. Good job! After the first week, you should notice a further increase in gloss and slickness as the coating continues to cure. Make sure you don't wash the vehicle for the first 14 days after the initial application.

@stevejordan9567 8 ай бұрын

@@PanTheOrganizer I might post a video of it on KZfaq, there’s not a lot of info out there on KZfaq that I’ve seen.

@spark1545 4 ай бұрын

Is one bottle enough to coat the whole vehicle?

@stevejordan9567 4 ай бұрын

@@spark1545 I did my 4Runner including the roof and it was plenty. It was my first time and think I went a little heavy on the application. I love the coating, it’s very good. Cleaning my vehicle is a lot easier and the water runs right off. I’d highly recommend it.

@bartsalien8363 Жыл бұрын

Applied the extreme and one year later the topper. The latter is impressive sofar... just after applying I drove a week through the most dreadfull weather (hard and dirty rain) and its amazing how good it still looks after that week. So I do recomme d the product and if this hg combines both the extreme and topper, I would go for that solution ;)

@PanTheOrganizer Жыл бұрын

👍🏻

@bobvi5490 Жыл бұрын

Just applied Dura Slic to my 2021 Boxster. I expected that it needed correction, but was shocked to see the number “21” stamped into the driver’s door (printed through from paint shrinking back over time? whatever it was, it buffed out beautifully). Best surprise was the great gloss boost from the DuraSlic HG.

@PanTheOrganizer Жыл бұрын

Thanks for sharing your experience Bob. This is an excellent choice for a coating! Yeah the gloss is very good, but did you also notice the slickness? And it will only get better in the coming weeks, while the coating continues its curing!

@TRX2021 Жыл бұрын

Question: Do you find the best Graphene against the best Ceramic to be actually better...It seems like the focus is mostly on Ceramic from most companies ..I just got the Graphene from Dura-Coating being my fav Ceramic (Nano 1 Coat 4+ year 9h) I got there Glass X to for the window as it has a durability of 1.5 years and up...I've had it on my truck for 2.5 years and it's still performs great.....

@user-gv7ef1jb1t Жыл бұрын

I've learned a lot from your videos and have had great results with my 2 daily driver cars, but I haven't seen much on how to care for my old car. I have a 66 Vette that was painted in the early 70s and I don't believe it has a clear coat. Can you do a video specific for this kind of vehicle?

@glennarmando39 Жыл бұрын

Welcome to the weekend, and Happy Memorial Day weekend to all warriors out there ✊🏿

@PanTheOrganizer Жыл бұрын

Happy Memorial Day weekend!

@mrsosa1898 Жыл бұрын

Pan theeeee Ceramic Organizer 😁 new video = new guide!

@PanTheOrganizer Жыл бұрын

😁👍🏻

@davidbalcar1226 Жыл бұрын

How does this work on Glass? any thoughts on durability on the windshield? Thanks

@steph3n17 Жыл бұрын

Can we use this product for the windshield as well?

@berniehf Жыл бұрын

Cheers Pan from Costa Rica

@rickyconover7642 9 ай бұрын

Got me a coating ordered!!! Going on a candy apple red 1986 camaro!!!!

@PanTheOrganizer 9 ай бұрын

Enjoy!

@richardkarl879 9 ай бұрын

You should review the dura slic 1500 consumer grade version. Also a nano pro and a jade ceramic. That would be great!!

@claudel554 Жыл бұрын

Hi Pan, Again a great video! With lots of great advise. I have used Duraslic Extrem 1500 and starting Y3 on one of my car and it is the best by far the product that i have used, and got it boost by FlowX last year, and it is like a French install…. UNBELIEVABLE ! Would you recommend extra step for the prep to remove old Ceramic coating that was install 3 year ago? Again great job!

@PanTheOrganizer Жыл бұрын

The only way to ensure 100% removal of an existing ceramic coating is by machine polishing.

@michaelm1739 Жыл бұрын

Pan, do you have a particular clay bar brand and type (fine/medium/heavy) you use?

@1955superchevy Жыл бұрын

Pan was wondering where i can purchase the applicator pads thanks for the help

@1stfrompuertorico568 Жыл бұрын

Haven't tried that one, thanks for showing it!

@the_jnlt_channel Жыл бұрын

That looks like an amazing product. Not only the finish but how easy it is to apply. I have to do all my work outside, although I would put up a cover if applying ceramic coatings. It's always good to see one that looks quicker and easier to apply than others on the market. Thanks for sharing mate 🙌

@PanTheOrganizer Жыл бұрын

Thanks for watching!

@carlosr157 Жыл бұрын

@@PanTheOrganizerHi Pan, could you recommend a wax equivalent to Gyeon Q2 wax please. Gyeon wax has been sold out on car supplies warehouse for a while. Thank you.

@25Jon Жыл бұрын

Trusted you with this one Pan.. Installed on a new 2024 BMW X5 M60i. No detail from dealer so virgin clearcoat. Easy to put on, came out good. Looking forward to seeing how it holds up.

@PanTheOrganizer Жыл бұрын

And the slickness is great! Good pick!

@25Jon Жыл бұрын

@@PanTheOrganizer it rained today, water beaded off beautifully.

@mattbriggs7319 11 ай бұрын

How is the resistance to water spotting? Still glad you went with the HG?

@rockystallone3925 Жыл бұрын

@pan great video! With brake duster have you noticed that the brakes start to be less good? I've tested it

@PanTheOrganizer Жыл бұрын

You mean Brake Buster? I never had any issues with it.

@user-sb2xu4pe1b Жыл бұрын

Pan, great video! I'm interested to know if the water spotting is less noticeable with the Extreme HG version vs. the Extreme. I have applied Extreme on 3 cars, and the water spotting is pretty bad. Have a great day, thanks!

@PanTheOrganizer Жыл бұрын

FlowX was created as a topper for Xtreme 1500 and that should help you. But yes I’m told that Holy Grail is much less prone to water spotting.

@JeanPhilippeStPierre Жыл бұрын

Another great product and video! Thank you, Pan! I have a quick question for you : if, one year after applying DuraSlic Extreme, I found swirls due to winter in Quebec, I will have to do a minor polishing correction. Does it mean I will have to apply another coating of DS Extreme on that section?

@PanTheOrganizer Жыл бұрын

Yes, as machine polishing is what removes coatings. So you would have to reapply. But if you use safe washing and drying techniques, you should not have swirls or scratches for a few years.

@edsexton9836 Жыл бұрын

OK, I'll take your word for it, Pan. Just ordered the kit. Hopefully, I'll be able to do a good job on my car with it.

@PanTheOrganizer Жыл бұрын

👍🏻

@mattbriggs7319 11 ай бұрын

How did ya like it?

@edsexton9836 11 ай бұрын

Unfortunately, I haven't had time to apply it yet. I'll post back here after I have.@@mattbriggs7319

@dakotasimon3445 11 ай бұрын

Any updates?

@nickobrien8388 Жыл бұрын

I can’t seem to find a Canadian installer. I live is Oshawa which is just outside the Toronto area. Is there a Canadian link?

@StUtP9R4 Жыл бұрын

Your customer is driving on proper winter tires! 👌🏻

@gregschulties6020 Жыл бұрын

Thanks for this offer Pan,i recently coated my truck(first time coating) and it turned out great but after 2 months im not 100% happy with the coating,it seems to hold water spots pretty bad and has graphine which i though was supposed to help fight water spots? Anyway,i have wanted to try to find a professional grade coating but have no certifications so,this is perfect.

@PanTheOrganizer Жыл бұрын

Polishing a coating isn't recommended, as you would damage and strip the coating. Mechanical abrasion and friction will remove the coating. Chemical decon steps are always preferred on coated cars. I would recommend the following steps: 1) Wash the car with a decon shampoo like CarPro Descale. It's slightly acidic pH will help remove minerals and water spots. 2) Rinse it, then use a tar remover if you have tar deposits. 3) Rinse it, then use an iron remover to remove brake dust and industrial fallout. 4) Rinse and dry the vehicle. 5) Then use the water spot remover, which will also help to remove any minerals left on the coating that perhaps are masking its properties. Rinse, and wash the car again. The coating's properties should be restored at this point, assuming the coating is in good shape and was applied properly and is still within its claimed durability. Also, clay bars are abrasive by nature, and again, not recommended on coatings as you would damage the coating and potentially add some marring to the paint. If maintained properly, you shouldn't have much embedded contamination. In some rare cases where you might find some contamination left after all the chemical decon steps, like a bit of grit in the clear coat, you could use a synthetic clay towel (that uses a different clay media compared to traditional clay bars) and lots of clay lube, in order to lightly clay the surface. A clay towel like this one: bit.ly/43nrfce Or this one: bit.ly/43y0Mss But test on an inconspicuous area first!

@25Jon 11 ай бұрын

Having applied this a couple months ago now I can attest to this being a really good product. Not sure if it’s the extreme hydrophobic properties or oleophobic that’s other brands don’t have, maybe both, but this really seems to keep the car cleaner for longer.

@PanTheOrganizer 11 ай бұрын

Thanks for sharing your experience! It’s one of my favourite professional grade coatings for sure!

@taylorwallingford8319 Жыл бұрын

Thanks for the great video, Pan! I was wondering if you could tell me if one bottle would be able to fully coat my Audi s3 or if I would likely need 2. Thanks for your assistance!

@PanTheOrganizer Жыл бұрын

One bottle is more than enough for an A3. Enjoy!

@taylorwallingford8319 Жыл бұрын

@@PanTheOrganizer thanks, Pan!

@richardkarl879 10 ай бұрын

First off love your channel!!! How would you say this compares to Adam Graphene advance ceramic coating that you used on your Nissan. In terms of durability, maintenance and also the shine. Thanks Rich

@PanTheOrganizer 10 ай бұрын

Hi Richard. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. The Nissan Rigue is my girlfriend’s vehicle. I dirve a Porsche 911 Turbo S. ;) But I prefer the DuraSlic coating. It’s an unfair comparison as the DS is a professional grade coating and costs more. The Adam’s is a consumer grade coating and costs less. I will have a 2 year update of the Adam’s coating next month so stay tuned!

@richardkarl879 10 ай бұрын

Awesome!!! I'll be looking for that video. Thanks for your response

@stevesmyth7714 Жыл бұрын

I ceramic coated my new Jeep in 2018 with the help of your videos. I was wondering do you have to apply another ceramic coating now and do you have video on reapplying?

@PanTheOrganizer Жыл бұрын

No video as you have to restart all the steps including machine polishing as it’s the only way to ensure 100% removal of any previous protection.

@zonadelocos Жыл бұрын

Hi Pan Just one recommendation to your Chanel most of the time you work on nice or new car doing polishing etc It will be interesting if you work on a really bad car(damage big scratches etc )and bring it back to life with recommendations products you normally used that will be a challenge

@PanTheOrganizer Жыл бұрын

Hi Omar. My channel isn't one of those "Hey look at me cleaning a disgusting car" or the style of disaster detailing video. There are enough copy-cat channels that do that. I have ZERO interest in cleaning disgusting or really bad cars. After 26 years of detailing, I focus on doing what I like most. So I do higher end full new car prep jobs, including application of a ceramic coating. I don't do entry level car wash or just clean a dirty car anymore. Plus, my audience is truly passionate about keeping their cars clean, so making disaster videos wouldn't be popular on my channel. Also, the techniques and products used don't change from a clean car to a dirty car lol. That changes nothing. You just need more elbow grease and time to clean really bad cars. Case in point, in all the disaster type videos, as soon as they're done pre-rinsing with the pressure washer, the vehicle is 85% clean and it gets back to the exact same point as a cleaner car. Disaster videos are more for entertainment. My channel is more about education through tutorials, tips and tricks. That being said, if you're curious, I made a few videos of cleaning filthy cars or older neglected cars, just for my viewers' entertainment a few years ago here: kzfaq.info/get/bejne/qaehlNCVyMDRnmw.html kzfaq.info/get/bejne/beChotl12Z2yeYk.html kzfaq.info/get/bejne/gdmdi6ug2JbeqY0.html kzfaq.info/get/bejne/n81oZceDlta0fmQ.html

@deansmith2124 Жыл бұрын

@PanTheOrganizer Howdy! Been watching and learning from your videos for a long time, really appreciate your attention to detail. I'm debating Duraslic + FlowEx as a topper vs CQuartz UK 3 + CQuartz SiC as a topper. Will Duraslic be the better combination for longevity and gloss, etc?

@PanTheOrganizer Жыл бұрын

Yes absolutely, DuraSlic should in theory last twice as long as CQuartz. It’s an unfair comparison though, as DuraSlic is a professional grade coating that costs way more. CQuartz is a consumer grade coating that is much less expensive.

@deansmith2124 Жыл бұрын

@@PanTheOrganizerThanks for getting back to me! I'm going to try Duraslic HG and top with SiC. Then a week later top again with FlowX. Hoping I get the benefits of both ceramic and SiC this way.

@dakotasimon3445 11 ай бұрын

I believe DuraSlic Xtreme HG and using FlowX as a topper would be better, but let me know how that works for you!@@deansmith2124

@davidthornton5519 Жыл бұрын

I have 4 cars I'm looking to coat. A Ford Flex, a Fusion, a Focus and a BMW M3. How many bottles do you recommend I buy? Great channel by the way. I can't stop watching! Thanks.

@PanTheOrganizer Жыл бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. Three bottles should be good, but it depends on how much you apply, that can vary from one person to another. After coating your first car, you’ll see how much you have left and it will be a good indicator for the other cars.

@RideAlong205 Жыл бұрын

What was the gloss meter reading result for this customer's car?

@mikehazel9131 7 ай бұрын

I have put the Extreme HG on a new 2024 Corvette Z06. Absolutely love the look and feel. I am just curious if you have done any update on performance. I also used the FlowX topper. That stuff just took it up a notch and initial opinion is great gloss and depth.

@PanTheOrganizer 7 ай бұрын

I can’t do updates for every product unfortunately, but the feedback I get is that this is still doing strong. It should do very well for you! Enjoy.

@mikehazel9131 7 ай бұрын

@@PanTheOrganizer I’m new to your channel and have watched a lot of your content. I have not paid attention to detailing in the last 5-10 yrs. A lot has changed and your videos are great. I like your approach and candid nature. I’m an engineer and love to dig into the details so your approach is right of my alley. Keep of the great work and have a good holiday season.

@PanTheOrganizer 7 ай бұрын

Thanks Mike! And yes you are right so much has changed. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@robl6044 Жыл бұрын

I will have to try that As I love using the 1500 Xtreme

@PanTheOrganizer Жыл бұрын

How long have you been using Xtreme for?

@robl6044 Жыл бұрын

@@PanTheOrganizer hey pan this year is the first time using it as I was recommended by you so I thought I’d give it a whirl. It’s a great product and Shawn from head of sales was telling me about HG earlier this year here’s a short clip of the last vehicle I did.kzfaq.infoAntZt9Pc8cQ?feature=share

@grandviewboy63104 Жыл бұрын

Hi Pan! What is the light source you are using in the video to inspect the coating? I didn't see it in list of items used? Thanks!

@PanTheOrganizer Жыл бұрын

This light: bit.ly/3BYLnpf You can also get it on Amazon here: amzn.to/3IMV1iC

@davidf9027 Жыл бұрын

Hi Pan! I’m looking into getting this new coating but, question: I did a Glassparancy graphene coat 2.5yrs ago. I do maintain every few months with a spray, and I still have good water bearing/repellency but i want to ‘refresh’ the paint and wonder how to prep. Do I need to get the current layer off (how much is left after this long?) and if so, how will I know when the graphene is removed, without going into the clearcoat? Thx for any tips!

@PanTheOrganizer Жыл бұрын

You would need to machine polish the paint to ensure 100% removal of any previous protection. You’ll know there’s no protection left when there’s no more water beading, and just very slow sheeting.

@uzairfarooqui3471 Жыл бұрын

Excellent video! Can this ceremic coating be applied to headlights, tail lights, glass and wheels as well? How many bottles will it take?

@PanTheOrganizer Жыл бұрын

Yes. How many bottles depends on how big the vehicle is.

@jimmyjasmine8801 Жыл бұрын

I usually end polishing with the kochchemi micro cut . Do you recommend anything else to polish with before applying a coating ? I just bought the coating in the link and thanks for the video. Appreciate if you can answer this for me

@dakotasimon3445 11 ай бұрын

Kock Chemie micro cut is the bomb, very good polish, that's what I use prior to coating.

@kimnewling5728 Жыл бұрын

Looks cool

@PanTheOrganizer Жыл бұрын

Absolutely!

@peppersmith Жыл бұрын

Nice, as i'm a Professional Detailer. No business though. I've worked for BMW for like 1000 years lol. But they actually has a Detailing school but for BMW employees Only. Top notch class. But this product is AWEsome - One layer = one coat. I wash my car at least 3-4 times a week. Cause by working at the Shipping Ports. It's a lil dusty so i hav to wash it off often. I hate dust on my car. So, i normally use waterless wash spray, gloss spray. Twice a year i do a ceramic coat fall & spring time. But u wanna know when ur car stands out the best. It's at night when either the Moon or street lights hit it. Maaaannnnnn, it looks SICK!! Better looking then in the Sun.. It jus looks like its wet on a Dry night. Ppl comment All the time "How ur car Shinning like that at night". Cause they see how Dirty their cars are. But what's funny is they park away from my car cause my shine Embarrassed their cars lol I'm fine with that cause i Stay Dent Free......

@oggyoggy1299 Жыл бұрын

Sure.

@hyperlite310 Жыл бұрын

Hey Pan! That Audi came out Pantastic! Just wondering what tire dressing/coating you used for this one. Cheers!

@PanTheOrganizer Жыл бұрын

Thanks Ryan! It was CarPro DarkSide tire sealant. You can get it here: bit.ly/35fJN1g

@jeffs6090 Жыл бұрын

You don't apply it to the windows? I guess just get rain x for them?

@gtileo Жыл бұрын

Pan, when you do a cooking job like this, how many microfiber towels do you generally go through? Is it simply just the 2 towels for removal and the final buff or does the removal get a little saturated and you switch to a fresh towel?

@PanTheOrganizer Жыл бұрын

I typically use 2-3 towels for the initial wipe, and 2-3 towels for the final buff.

@wessmith6558 Жыл бұрын

Hi Pan, I have been subscribed to your channel now for about a month. I love your content and approach. Does Duraslic have a coating for PPF or can this be used on PPF? Also, I normally do my own wheels. I see they have a wheel specific coating, yet more expensive. I am curious why this is and can HG simply be used or is there really that much more heat resistance in the specific wheel application? Thank you!

@PanTheOrganizer Жыл бұрын

You could apply the DuraSlic Holy Grail on your PPF as well, and on your wheels too if you want. Wheel specific coatings are usually a bit longer lasting on wheels as they are more heat resistant and have more durability in that harsh environment of heat, brake dust, etc. But don't expect a coating to last as long on wheels, as coatings last on paint.

@wessmith6558 Жыл бұрын

Can HG and Duraslick be applied over other coatings like Xpel Fusion or GTECHNIQ CSU or CSL?

@kevdan264 Жыл бұрын

Hey Pan! I’m in between Roar coatings or Duraslic HG? Which one would have the best value? Which would do you prefer after using both?

@PanTheOrganizer Жыл бұрын

Best value the HG takes it as it’s much less expensive and only requires one layer. The Roar Coating is a two-part system, and yes will perform better and likely last longer, but it takes more experience to apply, more time and coats more. Time will tell, but regardless of which one you pick, both are excellent picks. Traditionally only available to pro detailers, only available to my viewers for a limited time.

@lennypalumbo7739 Жыл бұрын

Hi Pan, is there a time period after applying a carnuba wax to let it cure fully before washing the vehicle? Thanks

@PanTheOrganizer Жыл бұрын

It depends on which carnauba wax you applied. It's important to follow the instructions on the label. But typically, a pure carnauba wax has no curing time. After application, you can drive off in the elements, no problem.

@jpmortician Жыл бұрын

Hi Pan ! J. P. Here from Toronto. I had my 2019 Jeep Wrangler Sahara ceramic coated with IGL kenzo. I recently had my hood repaired, and repainted. What ceramic coating do you recommend to go over the clearcoat ? Should i try a graphene coating ?

@PanTheOrganizer Жыл бұрын

Any coating you like it doesn’t matter. Just keep in mind to wait two full months before applying any form of paint protection on a freshly repainted panel. The paints needs to fully cure and finish its out gassing.

@jpmortician Жыл бұрын

@PanTheOrganizer Thank you Pan !! You are the greatest.

@EricKeen-ff5mw 8 ай бұрын

Where can we purchase the bigger applicators like the one you used in the video…Thanks in advance

@PanTheOrganizer 8 ай бұрын

Here: amzn.to/3SySbmR

@penncross1 Жыл бұрын

Am I missing something with the discount?

@stephenthompson1562 Жыл бұрын

Hi Pan. Wanted to let you know I ordered the product and I will keep you posted how it holds up here on Prince Edward Island. I haven't decided what vehicleI am going to put it on. But I am going to document the whole process and see how it holds up in Atlantic Canada here in PRINCE EDWARD ISLAND!

@PanTheOrganizer Жыл бұрын

Awesome! I like to have viewer feedback on how products perform in their conditions.

@stephenthompson1562 Жыл бұрын

@@PanTheOrganizer good morning Pan it was a hot one yesterday on the East Coast! Here in pei we're not dealing with the fires they are in Nova Scotia which is terrible. I was just thinking have you ever heard of using a tack cloth or compressed air or something before applying the ceramic coating to ensure there's no dust at all? The reason I ask is I used to do a lot of wood finishing and we always do that sort of thing.

@dakotasimon3445 11 ай бұрын

How is the coating performing?@@stephenthompson1562

@andrewpaden Жыл бұрын

Hi Pan, do these ceramic coatings start curing once they are opened, limiting shelf life of what remains in the bottle?

@PanTheOrganizer Жыл бұрын

A few months once opened.

@diaconitacristian1873 Жыл бұрын

Great work you do! and thank you for educating us in this detailing world . But can you recommend something for your European fans ? The HG+ shipping is 300$ 😱😰.

@PanTheOrganizer Жыл бұрын

See my video here: kzfaq.info/get/bejne/rcWUo9F7rcWxqmQ.html

@Doc236 Жыл бұрын

I had a professional Gyon ceramic job done with a 5 year warranty 18 months ago. Still beads water and cleans easy. Can I apply this over my old coating?

@PanTheOrganizer Жыл бұрын

No. True coatings (glass bottles) need to bond directly to virgin clear coat. You’d have to prep the paint and machine polish the old one off before applying a new ceramic coating.

@RamSlow Жыл бұрын

Can this be applied to the paint before I install a paint protection film like 3m---then apply another layer ontop of the film?

@PanTheOrganizer Жыл бұрын

Ideally, you don't apply protection before PPF. You want the PPF to bond correctly to the paint. Once your PPF is applied, then you apply a coating on top.

@JonathanGS 11 ай бұрын

Pan, can DuraSlic HG be used to coat practically everything on the car? Including body paint, wheels, glass, and plastic trim? I don’t see any information on this from their website. Please help, thank you

@PanTheOrganizer 11 ай бұрын

Hi Jonathan. In the video, as well as in the description under the video, I gave the answer to your question: " it can be applied to paint, glass, plastic trim, wheels and lights (not recommended on chrome surfaces)".

@dieminion1626 Жыл бұрын

Hi do you normally ceramic coat the roof? I never see it and was going to do mine bit not sure if I should

@PanTheOrganizer Жыл бұрын

All painted surfaces yes of course. It’s just impossible to film the roof with my gear haha.

@clementbrunet-moret2404 Жыл бұрын

Hi Pan. What is the best coating for maximum gloss?

@PanTheOrganizer Жыл бұрын

This is certainly one of them. Gyeon Pure as well. See my video here: kzfaq.info/get/bejne/rcWUo9F7rcWxqmQ.html

@mikeharris7412 Ай бұрын

Hey Pan, since this is no longer available unless you're certified, what is a comparable "prosumer" coating to this? I'm really pleased with the duraslick HG, but I have another car to coat. How does diy detail C6 lite compare? Thanks for your help!

@PanTheOrganizer Ай бұрын

This is likely the best right now: bit.ly/3yeW0Wh

@mikeharris7412 Ай бұрын

@PanTheOrganizer can this and the app be used on ppf as well or is the app just used on paint?

@totoro6214 Жыл бұрын

it's been a yr since i used gyeon matte ceramic coating on my car.. I'm wondering if a product like this would work on matte paint once my current coat becomes ineffective

@PanTheOrganizer Жыл бұрын

This is not recommended for matte surfaces.

@mrmuhtish Жыл бұрын

Question: when leveling with a MF towel, do you use a new towel every couple of panels? Or it doesn't cure/harden fast enough on the surface of the towel to mess up the applied cost on a vehicle? Thank you in advance

@PanTheOrganizer Жыл бұрын

I use 2-3 leveling towels and 2-3 buffing towels when applying a coating on a vehicle.

@stevejordan9567 Жыл бұрын

Hi pan I have a question I hope you can help with. I’m going to ceramic coat my car. I like gloss and water beading. I’m either going to get the DuraSlic HG or the Adam's Advanced Graphene Ceramic. Adams claims 9 plus years protection. Any thoughts would be helpfully.

@PanTheOrganizer Жыл бұрын

Claims on paper and real world durability are two completely different things. I applied the Adam's Advanced Graphene Ceramic Coating on my girlfriend's vehicle in October of 2021, and do regular updates on that. So far so good. DuraSlic is a more pro-grade brand and their HG coating is superior in every way possible (gloss, slickness, ease of application, hydrophobics, self-cleaning, etc) but also costs more. Both coatings are still relatively new to market, especially the HG which just launched, so nobody has had the chance to test them for 3+ years yet. Pick one, and enjoy, you can't go wrong.

@stevejordan9567 Жыл бұрын

@@PanTheOrganizer looks like the DuraSlic is the one for me. Thanks for having DuraSlic let your followers be able to pick it up. Can’t wait to get it. Thanks for your time.

@PanTheOrganizer Жыл бұрын

My pleasure. Enjoy!

@ianf2012 Жыл бұрын

How do you contact DuraSlic support? I have had no luck. Questions I have are around FlowX. 1) Can FlowX be applied on all vehicle trim, paint, glass? 2) can FlowX be applied on PPF?

@duraslic Жыл бұрын

Sorry if there was a delayed response from our team, but I believe you've received an email now. Just in case...1. We find FlowX is best on the paint and suggest our DS1500 for Glass and Trim. That doesn't mean you can't apply FlowX to these areas, but the best results are on paint as a topper. 2. Yes, you can apply FlowX over PPF, but we still recommend using a base of Xtreme first in order to get the longevity.

@roberts4515 Жыл бұрын

Looks like a great product. How does HG compare to Adam’s Advanced Graphene coating?

@PanTheOrganizer Жыл бұрын

The DuraSlic is slicker and has better hydrophobics.

@dakotasimon3445 11 ай бұрын

This is exactly what I was wondering. I just sold my 2019 Mustang GT, which I corrected and applied Adams Adv. Graphene and man....that coating was amazing. I'm really leaning towards trying this new Xtreme HG by DuraSlic, but it's hard changing coatings when Adam's worked so impressively. I will likely listen to Pan and give it a go, though! I will also use FlowX as a topper every few months.. The one thing about the Adams, is their Graphene Boost was challenging to work with..so using it as a topper was frustrating the two times I did it.

@2pickdubs269 6 ай бұрын

Hi, so I'm done my research about ceramic product. Came across this video but is unable to get the product. So many ceramic product out there now a day. Which one do you recommend? 🤔 Please and thank you.

@PanTheOrganizer 5 ай бұрын

All my top product recommendations are in my popular car detailing products awards video here: kzfaq.info/get/bejne/gbimatl82NvQmYU.htmlsi=E7b7letaq6n-5mHL

@sadibogdani8192 Жыл бұрын

Modesta Glass Coating, hands down best coating. Unfortunately it’s not consumer grade, only for professionals

@andreytsvyan. Жыл бұрын

Hey Pan! Just wondering what are your thoughts about Superior Products Formula 4 spray wax? Is it safe to use on graphene coated cars?

@PanTheOrganizer Жыл бұрын

I haven’t tested that product

@andreytsvyan. Жыл бұрын

@@PanTheOrganizer Hopefully you can make a video about it. I got from Orielly Auto Parts. Makes the water bead and gets rid of any water spots. Pretty awesome value too as it gets diluted 1:10.

@catwill2022 Жыл бұрын

I just installed CarPro Cquartz UK 3.0 on my personal car. I wish I had seen this video first 😢

@PanTheOrganizer Жыл бұрын

No worries. You have a great coating, and it was very inexpensive in comparison. You can’t compare pro grade vs consumer grade.

@duraslic Жыл бұрын

The reaction is awesome! #ChangeYourAngle

@usamattman1 Жыл бұрын

I put a graphene coating from GlassParency on my 2022 Hyundai Elantra N-Line and was driving behind a jacked up truck. I could not see what was in front of it but he had run over a fallen limb (not a branch, a legit limb maybe 4-6ft long and roughly 10 inches in diameter at the base) I was surrounded by traffic so I had no choice but to hit it. I was sick the entire way to my destination just knowing I had a giant scratch all down the driver side of my 2 day old car. I arrive to find not a single scratch but just some scuff marks that I wiped off with a towel. I am not sure if I just got insanely lucky or if the coating was the reason, but that alone has made me want to put a coating on every car I will ever own.

@PanTheOrganizer Жыл бұрын

Coatings are by far the best paint protection for sure. They aren't meant to protect against scratches though (only PPF can protect paint against stone chips and scratches) but luck was on your side for that unfortunate accident.

@Beyondspotlessauto Жыл бұрын

Pan, you reviewed lot of these what are you go to top 2 coating for 5 year product?

@PanTheOrganizer Жыл бұрын

All my top product picks are in my popular annual car detailing products awards video here: kzfaq.info/get/bejne/nbinpt2f3My4p3k.html

@lennykibbs260 Жыл бұрын

Sorry I'm new to this- few years worth of slickness, does the ceramic coating prevent environmental fallout from attaching to the paint?

@PanTheOrganizer Жыл бұрын

No coating can prevent that. What good coatings do is make washing the vehicle a lot easier. And the slickness also helps with helping your mitt and microfiber drying towel to glide better and thus reduce the chances of marring.

@lennykibbs260 Жыл бұрын

@@PanTheOrganizer IC, so do you perform contaminant removal in between if you feel the grit build up on your finish or just leave it until the coating has lost effectiveness and require a new coat?

@warrenbarnhartiv1148 8 ай бұрын

Did you find the application / buffing off of this product easier than the avalon king?

@PanTheOrganizer 8 ай бұрын

No. The AK is easier, but I don’t compare professional grade coatings (DuraSlic) to consumer grade ones (AK).

@amytan123 Жыл бұрын

Hi Pan. I’ve been watching your content for some time now and I must say, great job on the work you’re doing. However, I was hoping by now that you would do a video on vehicles that may need to re-apply ceramic coating. Is it the same process steps as you did the in the past when you first applied the first ceramic coating? What if your car’s finish has no blemishes but the coating is not beading the water on the surface like it did, can you just reapply by just cleaning the car, decontaminating the paint, and then reapplying the coating application? I think that would be a great video for you to do. Thoughts? Thank You. Amy

@07wrxtr1 Жыл бұрын

No. You get to polish and remove the old coating first… basically treat it like an untreated vehicle… wash clay polish etc… FUN!!!

@ChainsawChristmas Жыл бұрын

Is a topper not bringing the beading properties back? Sometimes there's a lot of protection left, but the water beading properties have just lot a bit of sickness/hydrophobic properties. Get a ceramic topper like the one he shows (the spray bottle) in this video and put it on top. If the ceramic is truly worn out then you'll have to do what the commenter above stated.

@07wrxtr1 Жыл бұрын

@@ChainsawChristmas Chain - on my midnight blue car - the cquartz is just past 2 years old - been parked outside during that time - now I have discoloration that shows on the tops - only when you take your sun glasses on /off will you see it... so planning on doing mine soon... but hot weather means I get to wait til fall now! Going to try Gyeon Evo Pure - and Cure.. just to change it up a bit. I like their ceramic detailer on top of cquartz - it's a bit faster/easier than reload 1.0...

@PanTheOrganizer Жыл бұрын

Two separate questions here. If the coating is at the end of its lifespan, it needs to be fully stripped off before applying a new one. So you would restart the entire steps: wash, iron remover, claybar, machine polishing, IPA wipe, and then you reapply the coating. If your coating is nowhere near its end of life, and doesn’t seem to have the same strong hydrophobics as it did, assuming it was applied properly and it wasn’t a faulty coating, sometimes coatings just need a deeper clean to “unclog” the pores from grime and traffic film. See my tutorial on a deeper coating cleaning here: kzfaq.info/get/bejne/pbqReaiQ1Zizcas.html