Is this the perfect lift for the ‘11-‘15 Grand Cherokee?

No video

Is this the perfect lift for the ‘11-‘15 Grand Cherokee?

Рет қаралды 14,859

Күн бұрын

Going over the lift I have installed on the TRAILTROOPER.
Make sure to head over to Instagram and follow me @trailtrooper 👍

Пікірлер: 31

@wyatthelmer5573 3 жыл бұрын

hell yeah baby, TRAIL TROOPER for the win!!!!!

@Peter-xtreme 3 жыл бұрын

Excellent information, thank you.

@nateinsd 3 жыл бұрын

Awesome! Great video man 🤙🏻

@MrCampo4203 5 ай бұрын

What kind of guard is on the front bumper? Looks sick I want one

@Ranger2fast 3 жыл бұрын

what a pristine video very excellent

@prevelbob8159 2 жыл бұрын

Thanks bro 👍👍👍👍

@toordog1753 Жыл бұрын

I didn't understand what you were saying about the diesel and the front springs.

@Ranger2fast 3 жыл бұрын

what a class video aaron

@bcgbrad5650 Жыл бұрын

Need to be cautious with those struts. I've bent the bottom bracket and it damaged the drive shaft. Not fun on the back roads.

@billwatcher9321 Жыл бұрын

Not to burst your bubble but, all wk-2's use the same coils. There is no difference between 3.0 diesel, 3.6, 5.7, or 6.4. Same part number for all.

@jamescopher9973 2 жыл бұрын

Are the rear shocks the bilstein 5100s for 0 to 1 inch lift? They’re the only ones I can find. Thanks man love the Jeep! Totally inspirational!

@motorcyclezeal4813 3 жыл бұрын

Good stuff !

@chevys103 3 жыл бұрын

Execlent technical support video next let’s get stroking techniques

@scotianbank 10 ай бұрын

Do the HEMI springs make the ride firmer and/or stiffer? Same question for the Bilstein suspension. I love the ride quality of the stock Grand Cherokee, so I'd hate to lose some of the ride comfort...

@markchambers8641 2 жыл бұрын

Great video.

@skipthedip1 Жыл бұрын

Hey I have a 2015 jeep grand Cherokee wk2 with a old man emu lift and JBA upper control arms and woody lower control links . My left side drivers side strut is not extended all the way up , it looked like it was blown out with no nitrogen, so I bought a new strut and isolater and used the old spring , it’s still sagging on a new strut , so what could it be ?! Would a bent subframe case this or a bad lower control arm and bushing? Need some help my friends

@apbt6764 2 жыл бұрын

how did you put 2.75 inch coil springs and use bistein 5100 1"lift on the back??????

@Jellyfish1776 Жыл бұрын

Do you have a link for the sway bar end link extensions? I can’t find them anywhere

@Fabianarroyo110 2 жыл бұрын

What links are you running? Great video!

@robertmoore2860 10 ай бұрын

Can u put a list or links to your lift on here

@Ranger2fast 3 жыл бұрын

love it

@bearsj3 2 жыл бұрын

do you feel like you lack mud and sand /snow mode or is it not needed with lift - thanks

@TRAILTROOPER 2 жыл бұрын

It would be nice but honestly all that stuff is more of a gimmick to me. Driver control and keeping up wheel speed is what will get you through an obstacle. Low range and a rear locker would definitely be beneficial though. If I were to do it all over again, if definitely would have bought a Trailhawk.

@davjaramillo 2 жыл бұрын

Did you fabricate that front bar?

@TRAILTROOPER 2 жыл бұрын

Yes

@Ranger2fast 3 жыл бұрын

kickass

@rockabillyrebel9207 3 жыл бұрын

Lowest spot is your control arms in your jeep not the middle bar

@TRAILTROOPER 3 жыл бұрын

Yes that’s true, but the control arm moves with the tire so clearance that isn’t near as important as center clearance. If you drop down an obstacle, it’s not the control arm that’s going to hit, it’s going to be something after the tire, which is usually the t-case or transmission pan.

@rockabillyrebel9207 3 жыл бұрын

@@TRAILTROOPER But from what the jeep dealers have told me thats where they measure from so measuring from anywhere else is pointless as a comparison. Diffs used to be measure as they were the lowest point which isnt usually the same with independent systems .

@Doomsday410 3 жыл бұрын

@@rockabillyrebel9207 A WK2 is advertised as having 8.6 inches of ground clearance stock. I can tell you from experience Jeep wasn’t measuring the control arm for that number. The control arms are def lower.