Is this the Ultimate Budget 2 Stroke Build? Yamaha Blaster 200 Engine Build w/ Cheap Parts

Рет қаралды 188,368

Жыл бұрын

Is this the Ultimate Budget 2 Stroke Build? Yamaha Blaster 200 Engine Build w/ Cheap Parts
#yamaha #2stroke #build
Who thinks this will hold up? I will be putting EXTRA emphasis on riding this hard during Top Quad 3. (Bringing an extra top end incase 😂)
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Surfacing Stone - ebay.us/nLyZHE
Surfacing Stone Stand - ebay.us/DJRzBq
Dewalt Shop Vac - amzn.to/40KR8lt
Long Shank Burr - amzn.to/3XrAJiS
Bottom end Bearing Kit (Not Recommended) - ebay.us/XmUOsY
Tusk Seal Kit - bit.ly/3YyzjEm
Crank Installer - bit.ly/3YG7LNh
Measuring Calipers - ebay.us/aIX1fC
All Balls Crank Bearings - amzn.to/3JVLEyk
Dead Blow - amzn.to/3YJX3VV
Top End Kit (Not Tested Yet) - amzn.to/3lxoAeU
Stainless Head Studs - amzn.to/3IdJE3g
Cylinder Dampers - ebay.us/hEg48X
Feeler Gauge (For Ring Gap) - ebay.us/6Wec7d
Helicoils - amzn.to/3RRVDGH
Dowel (Head Fix) - Part #99530-10114
M12 Rotary Tool - amzn.to/3xfWvvs
Mini Cutoff Wheels - amzn.to/3luyQ7H
Tusk Gasket Kit - bit.ly/3jSV8Qf
JIS Screw Drivers - amzn.to/3WgdN6F
Milwaukee M12 Impact Drivers - amzn.to/3WCwLUy
Milwaukee M18 Impact Driver - amzn.to/3hJTjE9
Milwaukee Driver Set - amzn.to/3HSrzrC
Exhaust Grommets - ebay.us/Vlv5nP
FMF Header - bit.ly/3WC5guA
FMF Silencer - bit.ly/3HUb6mF
Clutch Holding Tool - bit.ly/3ViSzUh
Milwaukee Hackzall - amzn.to/3FNlAlm
CNC Oil Cap - ebay.us/CUWt99
Service Manual - bit.ly/3Yg9zNK
Blue Loctite - bit.ly/3wpg444
Red Loctite - bit.ly/3kDQTIn
Loctite 272 - amzn.to/3GZe0Vb
Drill Bits - amzn.to/3J5Ybi7
Torque Wrench - amzn.to/3ZUfYyX
T Handle Allen Wrenches - bit.ly/3QYMJXA
SPONSORS/COMPANIES I TRUST
Rocky Mountain ATV MC - bit.ly/32OHs02
Bonehead Performance Coatings - boneheadperformance.com/ (Mention my name and get 10% off)
Rocket Ron - www.rocketronracing.com/
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
Urmosi - urmosi.com/
Power Sports Nation - www.powersportsnation.com/
Vito's Performance - www.vitosperformance.com/
MotoBlast - www.njvaporblast.com/
Zoom Zoom - zoomzoomparts.com/
MERCH - michael-sabo.creator-spring.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.

Пікірлер: 538

@MichaelSabo Жыл бұрын

Who thinks this will hold up? I will be putting EXTRA emphasis on riding this hard during Top Quad 3. (Bringing an extra top end incase 😂)

@djdubs8544 Жыл бұрын

I think itll run fine i ran a rebuilt starter bearing for a while with fucked up rollers on my raptor 660 because i ordered the wrong year one and it still worked decent until i got the right bearing in.

@mikek1313 Жыл бұрын

Itl be fine

@dubiousf00d Жыл бұрын

Should hold up. Thrash it hard and have a blast on your blaster. Lol

@gabrielmolinaro9409 Жыл бұрын

Best build I've ever seen on a Yamaha blaster 200.

@jdwilson533 Жыл бұрын

I think it will be fine tbh

@mitchmuiz4933 Жыл бұрын

Nothing better than a mid day Michael sabo video

@MichaelSabo Жыл бұрын

Thank you for watching in the middle of your day bro!

@derekthompson5552 Жыл бұрын

Yess

@JAFA251 Жыл бұрын

Right?!?

@darkfire8615 Жыл бұрын

True

@darkfire8615 Жыл бұрын

@@MichaelSabo love you man!

@eliotsell7483 Жыл бұрын

Most channels don't take the time to show or explain this kind of stuff. The nice thing is all of this knowledge translates to any engine build. It has helped me gain confidence with my current vintage motorcycle engine tear down. Great job!

@MichaelSabo Жыл бұрын

Dude this is so awesome to hear! Thanks so much for sharing this and I'm glad my videos have helped you.

@bradfordeslin2258 Жыл бұрын

I love how real you are. Just like you said. So many people lie to you. Or hide things. I’m just getting into atv’s and mechanics. And I love to watch you and a small handful of other people that do what you do. Keep chasing your passion and being real. Make ATV’s great again!!!!!

@MichaelSabo Жыл бұрын

In regards to the loose cylinder head - Someone made a really good point that the OEM studs may have a midsection that is thicker and that that is why the holes seemed too large in my cylinder head. I do have OEM studs on hand and I tested this - the OEM studs do have a midsection that is not threaded but it is not thicker than the all thread studs I used. Here is the OEM stud part number - 90116-08394-00 - You can see in pictures the OEM stud actually appears to be thinner in the unthreaded section. The more you know.

@shoominati23 Жыл бұрын

It should be, as if the bolt is thicker in the midsection - it creates a stress riser that will mean you will have a heartbreaking snapped bolt after a rebuild or two

@brandondixon4457 Жыл бұрын

Did your kit come with the head and cylinder?

@johnfamulski6925 Жыл бұрын

Michael, you deserve way more subscribers. Not every day do you come across hour long engine build videos and they are actually highly detailed yet entertaining. The amount of effort put into your videos is actually insane.

@gabrielperez2937 Жыл бұрын

Wow! This guy never disappoints! The level of honesty and integrity to build these machines the right way. Keep sport quads alive!

@maxxisrazr2012 Жыл бұрын

You are the real deal man. Showing the little "hangups" during a build teaches us more than a smooth edited video of an engine build. Much more entertaining too!

@Trap..house. Жыл бұрын

I bought a blaster just to rebuild it because of this series! So cool love the videos ! Video editing is on point !

@MichaelSabo Жыл бұрын

Dude that's awesome to hear! Good luck on your build!

@fmscooter768 Жыл бұрын

You are really the best Michael, its so cool that you show when shit doesnt go your way and like you say a lot of youtubers only show the sunny site like there are never problems, wrong parts and stuff like that, but everybody that does or has really worked a lot with engines with scooters or quads knows these problems, no matter how good and meticolous you work, shit will happen, to show it just says a lot about your personality, i really really appreciate that very much, and how you deal with problems shows how good you really are. like said ten times before i love your videos dude, keep on ! you could easily make a tv show!

@owensbama1923 Жыл бұрын

You do really good work Mike. Great videos. Always very informative. Really like how you break things down. Keep it up man.

@MichaelSabo Жыл бұрын

Thank you dude!

@helonwhels1206 Жыл бұрын

How does this man not have a TV show? If he did it would be fire. 🔥🔥🔥🔥

@djdubs8544 Жыл бұрын

Also thank you for making the most detailed informative videos around it helps a ton for people like me who have no clue what their doing tearing into the engine. So many videos are so bland and have no actual footage of parts being installed.

@MichaelSabo Жыл бұрын

Glad to hear my videos help! Thank you for watching them.

@djdubs8544 Жыл бұрын

@@MichaelSabo no problem thank you for inspiring me to keep going with my raptor 660 and to not give up!

@jefferybye2169 Жыл бұрын

It looks amazing Mike, big difference from how it looked..great job like always..you never disappoint

@MichaelSabo Жыл бұрын

Thank you Jeff!

@jdwilson533 Жыл бұрын

🔥 glad you leave the troublesome issues in just so we know we aren’t the only ones lol

@sethdhoodhanath4350 Жыл бұрын

Love all your videos from south africa

@MichaelSabo Жыл бұрын

Greetings from the US; thank you for the love 🤘

@__Yusuf63 Жыл бұрын

Same here from Newcastle

@IFIXATVS Жыл бұрын

This engine is going to SING through that FMF Fatty. I’ve had one in my personal Blaster forever and the sound of it never gets old. Anxiously looking forward to the first ride of this as it’s something so familiar and attainable to all of us. Bravo on another sick video, Mike! Keep ‘em coming!!

@ivanbarton4475 Жыл бұрын

I've wanted to see a blaster build for so long and you're really doing the best one in KZfaq. Thanks for taking the time to document, film, edit and post your work. I hope your channel keeps growing.

@litbeta Жыл бұрын

Just woke up And this build is up, the best start of the day.

@MichaelSabo Жыл бұрын

Thank you for watching man!

@thegreatiam316 Жыл бұрын

Production quality of this video is the best yet. I can tell a lot of work went into making it enjoyable to watch. Always appreciate the help you give us all. Paying it forward is the way !

@djdubs8544 Жыл бұрын

I agree that people should be more honest man. Everyone is screwing eachother around nowadays treating eachother like nothing.

@MichaelSabo Жыл бұрын

Sad but true

@djdubs8544 Жыл бұрын

@@MichaelSabo Every time i buy a quad theres way more wrong with i think possible, even if i buy a "trail ready quad"

@__Yusuf63 Жыл бұрын

Absolutely love your videos... I feel like I can rebuild any bike in sight because of your videos

@fadedlight8596 Жыл бұрын

same

@__Yusuf63 Жыл бұрын

@@fadedlight8596 Best thing is that he's really honest and accepts the fact that everyone makes mistakes unlike other automotive KZfaqrs who thinks they perfect

@fadedlight8596 Жыл бұрын

@@__Yusuf63 yep. I wish I could do something similar like him we need more like him for a broad spectrum of things.. imagine if our government put in as much effort as he puts into his videos. We'd have flying cars!

@MichaelSabo Жыл бұрын

Dude, this legitimately made my day. Thank you both for the awesome comments and support 🤘👊

@shanemcclain8562 Жыл бұрын

Love ur engine builds u make it so almost anyone could build one just by watching step by step.i love just watching and learning things I didn't know before.u are one of the best builders there is and to offer ur knowledge to everyone is amazing and ur a humble guy .ur quite possibly my favorite KZfaqr! hope to see u with stupidfastjohn soon!

@hugosanchez6305 Жыл бұрын

the best 2 stroke rebuilder🤙🏽👏🏼👏🏼👏🏼keep going michael, watching from spain

@MichaelSabo Жыл бұрын

Thank you for that man!

@djdew78 Жыл бұрын

@Michael Sabo this is why i love your vids you use parts we all can get. and you dont hide mistakes we all make

@bradwellman6105 Жыл бұрын

Your honesty is truly sincere! Thank you for all the time you put in and detailed explanation.

@joshmessick45 5 ай бұрын

Dude you are definitely a real one. I love your commentary and I’m the same way when I put things together I’m talking shit to it the whole time lol. Great instructions and video. Also like how you add some funny remarks and things you think might help in the event of. Keep it up bro. I’ll be using these videos as reference to build my first blaster from the ground up.

@ryanschneider4750 Жыл бұрын

I totally agree with you're rant bro!! Think that's why I've watched you since you had 10 thousand subs. Also, you're very thorough.

@kylekallies3381 Жыл бұрын

Love watching engine builds I remember when I took a small engine class in high school and it was so much fun taking it apart and putting it together lots of work and you really need to pay attention to all the part

@BigTree412 Жыл бұрын

Love the videos buddy always a happy day when a video drops. Though I feel like I'm stocking you lol , I found some banshee 2 into one pipes there like 1000 bucks and your probably the only dude on KZfaq who would buy them and test them and just do your thing 💪

@MichaelSabo Жыл бұрын

Thanks for the love man! I have wanted to try one of those 2 into 1 pipes, just to see the difference/feel. I think Dynoport and Sheerer still offer them new for less than 1k.

@mxthunder2 Жыл бұрын

major props for getting the granite master flat. so many people try to do heads and things on a workbench and do more damage than good. could have put the crank in the freezer and slightly warmed the bearing for easier crank install.

@meltedpistons Жыл бұрын

I’m ready to see this thing rip Sabo!

@MichaelSabo Жыл бұрын

Me too dude I'm dying to get this bastard together!

@jordanwilson4481 Жыл бұрын

Can’t tell you how happy I am to see this video up! Keep up the great work buddy

@MichaelSabo Жыл бұрын

Hell yea man! Hope you enjoyed it and thank you for watching 🤘

@stevenleutz6035 Жыл бұрын

Had a similar issue on my ‘’83 RM250 with crank case. Case halves went together but crank was tight spinning. Ended up being crank web width was out of spec to wide. Had my crank builder redo it and was all good. Learned to double check everything before assembly. Now I will check bearings too. Awesome build Mike. Cheers.

@unknxwnbuilds9955 Жыл бұрын

mike you should do a podcast idk why but i can just listen to you talk all day lmaoo

@MichaelSabo Жыл бұрын

I've been talking with a friend of mine about doing this for like 2 years now; we might lol

@dev8162 11 ай бұрын

Started watching you after I rebuilt the top end on my blaster before u started on yours wanted too work on one so bad bought a blaster frame scavenged for months finding all the engine components and this video has made everything so easy thanks mike 👌

@russelladkins-bt7oj Жыл бұрын

Love the video mike!! Keep it coming 😁

@vincentlamoureux8446 Жыл бұрын

Honestly honesty is the best policy

@phil8461 Жыл бұрын

Your build videos are so detailed I love watching them looking forward to your next video

@keithkeller698 Жыл бұрын

That china stator, drw case savor and oil fill cap are worth talking about. I just finished rebuilding my son's blaster with the hot rods crank kit, ken o conner head and counter balancer and weisco piston kit. Ken oconner has a really good build video but I like seeing your different methods. Good job Mike 👍

@FarmersforTruth Жыл бұрын

It's nice how you show real life issues. How the rollers fell out of the bearing is what actually happens even if your being super careful it's no different installing ujoints in a driveline I've had a few fall out and decided to send it and never had a issue with that ujoint for thousands of miles. Love the vids bro

@VinnieSuhfatwop Жыл бұрын

You're the man Mike!! Keep it up!! I'm waiting on my Tecate build😉

@drspatzlescowboy7372 Жыл бұрын

This thing came out awesome, keep up the good work!

@floridatrailrider305 Жыл бұрын

Motor came out really nice, great work Sabo

@MichaelSabo Жыл бұрын

Thank you brotha!

@jeanjohanvanzyl6830 Жыл бұрын

Looks great Mike! I would have lost it , if I had to strip the engine again! You handled it well!Keep up the great work! Can’t wait to see the final product 👍👍👍

@michaelboots7690 Жыл бұрын

I ❤ Blasters! I was always hoping to see one here.

@SKSAl965 Жыл бұрын

You are the best Michael ❤

@MichaelSabo Жыл бұрын

You are the best!

@videosforfun5558 Жыл бұрын

Looks awesome. Can’t wait to see it perform

@TheChaz81 Жыл бұрын

Sabo's channel is the shit! It always gets me excited to work on my bike!

@benjaminyoung1746 Жыл бұрын

Thank you for being so honest and real. Even if every build turned out to be crap, your honesty is invaluable. Thanks for what you have done for the community.

@BDauto86 Жыл бұрын

I been with you since 45k subs. I liked watching your builds cuz it was the same stuff I did years ago. I said it back when I started watching keep doing your thing and you'll go as far as you want. I would run that thing as is and see how does then tear back down and do your flywheel, porting and performance work. It would showcase what ya get on a budget and what ya can have with alil time, effort and patience.

@austinramsey4540 Жыл бұрын

Let’s goooo bro I’m pumped!

@shanatirrell6672 Жыл бұрын

watching this video on my wife's laptop and noticed she was not subscribed to the channel ..well here is one more for you Mike on you're way to 250k subscribers . By the way the video quality everytime we watch is just getting better and better with the ideas for shots and music mixed with jokes and serious tech talk. its great ! i wish you the 250k then 500k subs . keep at it mike !

@ralphvasso7209 Жыл бұрын

Love to see how you get better as a builder every time I watch one of your new videos

@jmarcinko1139 Жыл бұрын

Just awesome. Great work!

@ctait831 Жыл бұрын

Nice build as usual! I'm interested to see what type of longevity you get from this cheap kit. I'm willing to bet that this motor will run well and take a beating. The difference will be the attention you put into your builds. I like the humility you have and that you illustrate that anyone can do this stuff on their own with patience and the right tools and techniques. Cheers brother!

@867diesel Жыл бұрын

quality work again Mike

@michaelpresey2273 Жыл бұрын

Can't wait to see the finished product of this blaster I will be picking one up next week

@t-money8769 Жыл бұрын

Absolutely wonderful love watching the content keep up the wonderful great job that you're doing

@gaucker398 Жыл бұрын

General rule of thumb on seals is that the lip of the seal goes toward what you are sealing. Love the video Mike!

@titoace999 Жыл бұрын

Love your videos man!!

@elitegamer9483 Жыл бұрын

thank you for the quality content 🤘🏼

@shaynedumas4436 Жыл бұрын

I really love your attention on spec you do a great job when you build bro...keep on keeping on...great video 🤟🏻🙏💯

@markaddy53 Жыл бұрын

great job lad keep up the good work

@MichaelSabo Жыл бұрын

Thank you man!

@KielFender16 Жыл бұрын

Generally speaking with the bearing seals the Channels are on the inside facing the bearing, this is for two reasons the flat outside gives a good support for the shaft that is entering the bearing as these seals are usually laced inside with tiny wires to aid strength, if you pull an old one apart you will see the wires inside for support, with the channel inside facing the bearing this acts like a small grease trap so the bearings remain lubricated as much as possible, I.E when you switch the engine off that seal will hold a small amount of oil inside so upon first start up the oil will be there straight away to lubricate the bearing off the bat, this is generally what I have learned and have applied to all my vehicle work, not saying it’s gospel and to be taken as sure but I haven’t had a premature bearing failure as of yet, hope this helps for the future and people reading this…… again always love the videos……. Smashing out the work and top quality videos too 👍

@ljg0889 Жыл бұрын

Nice work man!

@MichaelSabo Жыл бұрын

Thank you man!

@700rRaptorLife Жыл бұрын

Unbelievable build man 😮😮 keep up the good work bruh 🦾🦾🦾

@gregorybrothers9650 Жыл бұрын

Mr. Sabo I really appreciate you attention to detail and all these builds. My 13yr old son and I enjoy these videos and he is itching for me to return from Korea to find a quad for him.

@club1453 Жыл бұрын

Cool vid as a car/truck mechanic it's good to see how the small motor mechanics build

@TheNotimprezed Жыл бұрын

These builds are so satisfying to watch. Can't wait for top quad and I think this will need a big bore kit in the future, way to nice to keep at stock power. Hey we also need an update how you like the new truck!

@ensporium8857 Жыл бұрын

I missed this video but I'm glad it finally got recommended

@c0munguyforcaz Жыл бұрын

I learn so much from sabo! Awsome video man! 10/10 editing and content! Very entertaining

@clintonmckee4528 Жыл бұрын

Can’t wait to start my first full rebuild!

@nolimit3663 Жыл бұрын

Nice build 👌 👍 really enjoying watching your videos 💪💪👊

@kkamp0528 Жыл бұрын

Badass brother love the videos keeps me motivated

@motolove293 Жыл бұрын

Great video man I love watching the blaster builds!! I live on a farm in Canada and that’s what I drive all year fuel treated when sitting 32:1 starts up every time

@1duv Жыл бұрын

watched the entire video and it was super informative. My pops and I had quite the falling out. And after I moved states, I lost interest in riding and working on bikes, reminded me of rougher times . After 3 years of no bike , i’m past it and getting started on a tc125 project . podcasts and videos like these have truly revived my love for building and riding again. thanks michael 🫵🏽🤘🏾

@kenharty6016 Жыл бұрын

Youre a good teacher bro ive seen maky engines apsrr but never new anytjing about the forks snd the shift drum id never figurr that out on my own and i work on all my own machines except if it gets way too much or needs machining. Thanks dog

@takedeadaim8671 Жыл бұрын

Bearings should always be tapped in with a one piece tool that fits the OD of the bearing, they make installer kits. Seals always get installed with the flat surface facing away from the liquid. Bearings all have numbers on them, it is usually universal and can me looked up on the internet for size. I worked at a two cycle motor shop when I was school, I machined and rebuilt motors all day long, usually 4-6 per day depending on the motor. I learned fast to check parts before assembly. The “Philips” head screws are actually JA screws, look the same but require a different driver.

@gheorgheandrei2255 Жыл бұрын

Keep up the good work

@MichaelSabo Жыл бұрын

Thank you man!

@user-ds6uc2hx3f Жыл бұрын

Nice build and great attention to detail!👊🇺🇸

@matthewsolicito4607 Жыл бұрын

Dude youre awesome!!!

@allenfisher3370 Жыл бұрын

Might just be me but I actually like seeing you have problems especially when you show the fix it keeps you real everyone else edits it out these blaster vids really helped me and my sons we are in the process of building 3 blasters again great content

@shrop Жыл бұрын

Good stuff, showing the error on the bearing. Not just that you were honest about chancing the fix, but it shows the potential danger of using a socket at a bearing driver. That kind of stuff happens to everybody. And I mean EVERYBODY. You probably just saved some 15 year old kid 3 months of leaf raking money. Good Stuff.

@davidfrancisco5311 Жыл бұрын

Man I love the fact that you keep it real. When I do stuff like that I’m like if anyone sees me they will call me a hack lol

@edwardgutierrez8629 Жыл бұрын

@michael Sabo You’ve helped me with my Yamaha blaster build. It isn’t done yet I actually just took it all apart getting it ready for a paint job and waiting for the plastics to come in and a oem carb. But informational wise, your the man 💯%

@fishreef33 Жыл бұрын

Good build 👏

@dawsonvandenbeukel7724 Жыл бұрын

I love that he makes three separate frames to throw out that bearing I died🤣🤣

@mixonmachines Жыл бұрын

Amazing work bro

@ArmyOfSixPs5Clan 6 ай бұрын

Hello From Belgium Thx For this Videos .

@adampaniczko8198 Жыл бұрын

Had two of them back in the 90's. Perfect for the tight trails cause how short they are.

@darreng2639 Жыл бұрын

Nice work 👏

@Redline_ratchets Жыл бұрын

I really like the end of the video where you staggered the before and afters was a pretty cool vibe

@chevyguy-hf1yq Жыл бұрын

I've been a tech 34+ years,, great job man,, great work.

@_skidge_7447 Жыл бұрын

New subscriber because of the honesty and frustration during the bearing installation.

@joeplayer2802 Жыл бұрын

I have watched this video adleast 3 times because I love your videos

@That1E_K1129 Жыл бұрын

When I installed my crank I used a 40mm 1" drive socket and a small section of pipe. I slid the socket over the crank shaft then I slid the pipe on and found a nut that threaded onto the crank and just slowly tightened the nut and it pulled the crank right in place. It worked a treat. But I'm going to have to pick up one of those tools from tusk for my next round of rebuilds.