The Isuzu straight boom truck crane is installed between the cab and the carriage. When the vehicle is operating, it takes power from the gearbox in the cab to drive the hydraulic pump to rotate. High-pressure oil is provided to each element, so as to realize the movement of the straight boom crane in various directions on the truck-mounted crane.
Isuzu straight boom truck crane maintenance:
1. The chassis is maintained at the local service station according to the after-sales service manual. The bodywork is based on the product operation and maintenance manual provided by the manufacturer. It is a necessary material for the crane operator to operate the equipment. Before operating the machine, be sure to read the operation and maintenance manual of the crane and perform operation and maintenance according to the requirements of the manual.
2. Keep the crane truck clean for a long time, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost.
3. Pay attention to the work load during the running-in period of the crane. Generally, the work load during the running-in period should not exceed 80% of the rated work load, and a suitable workload should be arranged for the crane to prevent the machine from overheating during long-term continuous operation.
4. The operator should pay attention to frequently checking the level and quality of coolant, lubricating oil, brake fluid, hydraulic oil and fuel oil (water), and pay attention to checking the tightness of the vehicle. At the same time, the lubrication of the various lubrication points of the crane should be strengthened. It is recommended that grease be added to the lubrication points in each shift during the running-in period (except for special requirements).
5. Pay attention to frequently observe the indicators of the truck-mounted crane. If there is an abnormality, stop the operation in time to eliminate it, and stop the operation before the cause of the failure is found and eliminated.
6. After the running-in period of the truck-mounted crane is over, the whole vehicle should be maintained compulsorily, and the truck-mounted crane should be inspected and adjusted, and the oil should be replaced.　The requirements for the use and maintenance of the newly purchased truck mounted crane during the running-in period can be summarized as: load reduction, enhanced lubrication, attention to operation, and attention to inspection. The operator pays attention to the maintenance and maintenance of the truck-mounted crane during the running-in period according to the manufacturer's requirements, which can effectively reduce the impact of the running-in period on the performance and life of the truck-mounted crane.
More truck crane photos:
www.wltrucks.com/featured_ite...