It only takes a drip, dusty MacBook Air with no power

It only takes a drip, dusty MacBook Air with no power - LFC

Рет қаралды 21,779

6 ай бұрын

Check out Adamant IT 2 for the Pod Cast and More: / adamantit2
I stream on games Thursdays and Sundays, 7pm UK: / nethesem
Join the Discord right here: / discord
Support the channel directly at: / adamantit
Follow us on Twitter at: / adamantit
Check out our Instagram at: / adamant.it

Пікірлер: 61

@clevermusicbox3630 6 ай бұрын

You are what I would call a competent IT technician, bar none. God-tier.

@lordwolffurry582 6 ай бұрын

Been watching you since 2013, 5th grade, glad to see you making videos still, thank you for inspiring me to work on electronics!

@yellownev 6 ай бұрын

I really hope the customer gets to watch the skill and intelligence applied to this fix. Well done very impressed. Keep em coming !

@als1035 6 ай бұрын

Excellent diagnostic lesson Graham. I'm glad you found the solution.

@carlojoselitochua2954 4 ай бұрын

Done watching, thank you very much for the informative repair video. I have learned significantly more troubleshooting & repair lessons in this tutorial video and to your other repair videos as well compared to my ENTIRE 4 YEARS OF COLLEGE due to the rotten & outdated standards of education here in the Philippines. I hope you will soon have a mini-series for Schematic & Boardview-free Voltage/Power Rail Tracing[12V/18-20V Main Voltage Rail, 5V, 3.3V, CPU/GPU Core Voltage Rail, DRAM Voltage Rail, IGPU Voltage Rail, System Agent/Northbridge Voltage Rail, PCH Voltage Rail, BIOS Voltage Rail, Battery Power Rail], Proper method of testing/checking of potentially faulty MOSFETs & ICs/Controller Chips, CPU/GPU/PCH Reballing and BIOS Bin File Editing.

@harriscom9255 6 ай бұрын

That looked like a difficult fix you were well pleased at the end. Love to see it.

@johncundiff7075 6 ай бұрын

I love the real frustration! You are right.. sometimes stuff just starts working.. or quits for absolutely no reason.... UGH. GREAT VIDEO SIR!

@stanpotter7764 6 ай бұрын

Thanks for sharing your amazing skills! I fixed one of these same machines but simply replaced the logic board. Very impressive to see the board actually repaired. 👍

@Ben24-7 5 ай бұрын

That was a pain staking operation right there lol Nice work , enjoyed the video.

@mattfoster 6 ай бұрын

always love learning things from your videos as always thanks for sharing your knowledge too.

@chuckbenedict7235 6 ай бұрын

Great diagnostic process, Graham. And I think you may be right...maybe cycling between hot and cold causing condensation sticking to the dust.

@macwake 5 ай бұрын

Would have been less of a struggle if you had the resistor pads pre-tinned with leaded solder

@wladewig 6 ай бұрын

I've been watching your repair channel for a couple of years, and I'd like to recommend you install an intake and exhaust venting system - especially when dusting off who knows what dust contamination, and for the solder fumes. Just concerned about your long term health.

@lemagreengreen 6 ай бұрын

0201 resistors, eek! I get the feeling I'd make a huge mess of things, the frustration with such tiny components...

@Sydney268 6 ай бұрын

Nice work, good video, didn't look like you'd have had a problem diagnosing this if it wasn't so obvious anyway!

@patrickdevries8794 6 ай бұрын

Love your video's only your volt/ampere meter indicator is so jumpy I almost get an epileptic seizure

@winlose3073 6 ай бұрын

great repair job!

@rolfsinkgraven 6 ай бұрын

A very nice video again thnx.

@onurolce 6 ай бұрын

You're very good in your job !

@gorjy9610 6 ай бұрын

Do yourself a favor and use rosin for these small resistors, it will not evaporate and will keep them glued to surface until solder melt much better than synthetic flux.

@longlost8424 6 ай бұрын

your videos are even more fascinating given this evermore disposable society.......

@yt4krist0f 6 ай бұрын

If liquid damage happens so often why don't they just coat the boards with some protective layer?

@Neo_AIO 6 ай бұрын

That's a lucky one because sometimes having water dammage on the 5v ic it's the PCH that ends up thoast 🙃

@Bromon655 6 ай бұрын

I want to do this kind of work, I’m currently enrolled in computer science at college but have been heavily debating if I’d be more suited with computer engineering/electrical engineering.

@turtuhl 6 ай бұрын

Unfortunately, your amazing skill and prowess saved another POS overpriced and proprietary Apple product. Amazed at your skill in these videos.

@stryder751 5 ай бұрын

When you say 425 degrees is that Celsius or Fahrenheit

@Kelekona_808 6 ай бұрын

I almost always drop/lose motherboard screws while building PCs. I'd have no chance of keeping track of tiny laptop motherboard components.

@Jutubee-ds1he 6 ай бұрын

0201 is about 0.6mm x 0.3mm :)

@gravedigga71 6 ай бұрын

Nice one. 👌

@tim0steele 6 ай бұрын

Ideas: put the board on a preheater and clean the old solder away with wick before placing the donor parts.

@MookieMc 6 ай бұрын

Amazing work in fine detail. I sometimes have trouble getting my key in the front door lock and here you are soldering 1mm parts on a board. Well done.

@stefanward-bradley7006 6 ай бұрын

With the tarnished points across the board, I am dismayed that there isnt some form of water repellent coating protecting it at least to a certain extent. Im thinking something like the nail varnish coating people use when doing delidding for liquid metal.

@TrimeshSZ 6 ай бұрын

No, no water shields, no conformal coating. You might almost think that Apple intentionally design them with nonexistent water ingress protection to make them more disposable.

@asv5769 6 ай бұрын

Great video overall, but I noticed that boot was unusually slow, did you check for sensors using HW monitor tools once it booted?

@Adamant_IT 6 ай бұрын

Yea it seemed fine, but it's a 1,8GHz 4GB board, so it's not exactly a speedy boi😔

@chrismurphy8383 6 ай бұрын

Well, you say 10 thousand billion, but I do believe it is actually 10.01 thousand billion

@WTFShelley 5 ай бұрын

nice video

@UKSCIENCEORG 6 ай бұрын

Bring back the old intro music!

@mrk717 6 ай бұрын

20.42 computer says no :)

@LuckyKeliones 6 ай бұрын

Hey, how do i post a macbook to you?

@brucewalker1908 6 ай бұрын

Fine video. You should have checked the resistors before you desoldered them. Not everyone has computer program to assist them. I’ll leave it at that. Thank you

@Adamant_IT 6 ай бұрын

I actually did, but I cut the section of the video because I was getting inconclusive results that didn't really say anything. I thought that might be indicative of the bad resistor (open line, so it gave a nonsense in-circuit reading) but after I replaced the resistor, I got the same nonsense reading. It might've been worth leaving in as a demonstration that in-circuit measurements can be deceiving, but the video was already pushing run-time.

@BirdManPhil 6 ай бұрын

Hey man, I was working on a 1466 that had power and backlight issues and I had the original charger. Where can I find a cable that I can plug into my power supply or meter to measure the draw?

@Adamant_IT 6 ай бұрын

Search ebay for magsafe 2 cable, and you can buy the bare cable. Or you can cut one off of a dead charger. These days I have a Paul L Daniels type-c meter, and I use a Type-C to MagSafe 2 cable with that.

@ozanpress 6 ай бұрын

You might consider getting hot tweezers

@GlenIT 6 ай бұрын

Graham, im also a tech can i ask one thing hope you reply, are you using desktop or laptop as computer repair assitant like for instance file tranfer and amusement while waiting for any jobs in your shop, thanks

@Adamant_IT 6 ай бұрын

My main work PC is on the repair bench, which does the video recording and is also references and other repair tools, then I have another PC on a different bench for data backup and restore.

@GlenIT 6 ай бұрын

@@Adamant_IT thank you so much for the response, im a big fan of yours, i like the way you solve hardware issues including no power etc, every time im on off duty i watch a lot of your videos, thanks again

@AC_Milan1899 6 ай бұрын

Great fix but are Apple laptops that slow to load?

@Adamant_IT 6 ай бұрын

Depends. If the macOS install has had some false starts, it'll likely fsck the drive on the next boot, which slows things down. But also macs in general aren't famous for their boot time. They sleep/wake quickly instead.

@pekitivey 6 ай бұрын

Do you mean 1ml of damage in the thumbnail?

@ravneiv 6 ай бұрын

Let's Fix Macbooks

@almostdarkslide3851 6 ай бұрын

That looks like vape damage and dust (caused by vaping).

@user-yz1dl3eu8l 6 ай бұрын

Vape covers with a sticky liquid which is impossible to remove, except with water. One cannot put water on a board. Maybe there is another way but I don not know it.