Thank you Lab Padre for another Great Spacex Weekly Update!!!

SpaceX looked at NASA and Congress and said, "Fine, I'll do it myself."

Great to catch another LabPadre catch-up!

Best weekly review. So detailed with time and captions.

Thanks for consistently cleaning the rover cams and providing these information packed updates for us !

The pace of construction is amazing. Thanks as always padre.

I also have to say I appreciate the clear, technically accurate language used to describe events in these weekly updates. I find I’m learning the proper names of equipment and construction techniques just by enjoying the video. Thank you, LAB and team!

Another week and another couple of Falcon 9 launches as Starship development churns along and Spaceport continues to grow. This is how humanity makes it to Mars. We are living in the future and it's great. There is so much bad news everywhere else these days, but these weekly SpaceX updates never fail to make me happy and hopeful. Thank you so much, LabPadre!

Best weekly update on SpaceX progress you can find anywhere!

A excellent recap Of the week's events,thank you Lab and team... !!

Wow! Awesome update. Thank you!

Just like SpaceX, Lab Padre is the best at what they do.

Lab's weekly update has become my favourite. Just straight facts, no fluff. Great job!

Great Update! Just one thing: When showing the tower arm movement it would be helpful to say when the video is showing x1 speed. Since almost all the other video is sped up it's hard to tell. Thanks.

Great channel, no unnessary content, keep it up one off the best.

Great update.

Thanks!

thanks for the catch up

What I love most about this channel is that it was there before there was a there there. 🚀

Another great episode, many thanks

I love watching the progress of Mega Bay 2. Everything is being set up for stretched Starships in the coming years. It’s made me realize more than anything that once V1 Starship is done and flown, High Bay is coming down.

I love SpaceX and their determination to prevail! Lol Keep Moving Forward.

I think SpaceX need to get the Tesla suspension design engineers in, to sort out how to fully dampen the arms.

Merci pour la vidéo

I'd find it doubtful that they'd try a capture until at least 2 or 3 good booster "landings" are successful. they aren't going to want to risk the tower. As for the chipstick's "wobble", that will depend on how fast they will be required to actuate in actual use. A damping Mass actively driven at the arms end might be effective, but would increase the arms weight and mass and quite possibly increase actuation time depending on the power of the arm actuators. Probably some compromise there...

I think they will wait untill the second tower is ready before trying to catch the booster

5:00 --> May I propose: As it seems, "Chop-sticks" beams should be stiffer horizontally, but even now they can fix this. They can install some horizontal steel wires to external side, to stress-up these beams so not to wave horizontally at sudden stops. These wires will automatically extent or contract to follow the movement of beams and must be always in tension. The cables must be in some angle with main beams to be able to hold them. So, maybe will need also some smaller horizontal beam around the base of each main beam, going outwards.

Nice camera work got some great shots.

WOW, those chopsticks are moving fast! And at that size, it almost seems impossible! But that’s SpaceX for ya. Making the impossible possible.

Go SpaceX 🚀

For that wobble on the chopsticks, they could use something like that on a motorcycle steering system to assist with high-speed wobble

👀🐔👀🐔 I like the fast pace, no B.S. information videos. 😁

Usual good job...

Great to watch yr regular updates of Starbase - so much taking place! The parking garage sure will help workforce parking - but seems to have small footprint for 6 story garage ! Why is there delay in erecting steel at eastern end of ths new office bldg?? C'mon ITF-4 !!!

They should stick a couple Draco thrusters on the chopstick arms to cancel out the rebound

OMG 🤩

Won’t be surprised if they trim the catching arms down, it would reduce the inertia greatly.

keep it simple, maybe try a very big damper rod between the arms, a hydrawlic damper would sort out that wobble during arm move

I think any Catch testing done now is for the new tower. The new tower will make the first catch attempts. Cant blow up the only launch tower. I have said this since the first of the year. We will see.

My cuzn was driving one of those tugboats!

Last time i was in a multi level garage i felt claustrophoboic

Oh Boy! So many new goodies 🚀

I am a little confused about the doors going in the high bay 2. Could you show us how they work in the space and still leave the large opening for the ships

They want to get some RCS on the ends of those chopsticks so they can rocket-punch them to the catch position

Maybe they could hang a booster mock up and catch it for a test ???

this is another busy update as the next flight gets ready

5:53 Are the people in the excavators okay while being hit by the purging from the tower? Maybe the excavators are air-tight?

9:51 “Media offline” message briefly flashes on-screen for a few frames.

Im only recently getting intrested in space flight so if this is a daft question please keep the sniping to yourself 🙂 Would it not make sense to test the catch arms for potential recovery by sending a (test) booster by itself on short low alt hops rather than after an orbital flight. Carrying less fuel, less weight etc. Thank you in advance

Humanity must get to Mars. It is so refreshing to see someone finally taking that goal seriously.

Wondering about landing legs for starship? How big would legs need to be to support a 50 story building? How much would those weigh?

top

Why has only one actuator on the chop sticks been replaced? Are they going to replace the other one before flight 4?

To be honest, I don't understand the details of the process intended to catch anything. Please enlighten...🤔

Parking garages don't get no respect. Looks like a boring old parking garage and not a structure at The Gateway To Mars. Thanks, Lab.

The arm don´t stop. inertia makes it shake...

Why show us sped up footage when talking about the chopstick speed test?

A Texas tornado could obliterate that new office building and the Star factory in a New York minute....😬😮‍💨...along with the megabays

Just gotta wonder...when do any of you think the first Starship will make the first trip to Mars? Year only. Aand....GO!!

I find it amusing that there is an audience that’s so fascinated by SpaceX that they want to be kept up-to-date on the progress of the new SpaceX parking garage.

Hi guys, i love your content but please be careful with your video titles. You create quality content, that's what we are here for, please don't fall in the same pattern as WAI with their clickbait titles.

5:58 Poor Excavator got fogged out.

It's gotta be quite distracting for the techs working on Starship and it's components to have all this building work continuously going on around them all the time.

Think they would want to test the catching a booster with a falcon 9 rocket

First in

You don't really need to keep calling it 'Test Stand B' There is only one test stand. How about calling it 'The Test Stand'?

Emergency!!! THE ONLY SOTUTION! Baffles will not work to prevent the fuel slushing problem, because the tanks of the starship system are too large. That is the only reason why the starship engines have been exploding every time. The solution: The tanks of Starship and Superheavy need 2 disk valves, expanding the diameter of each tank. One of the disks, the one on top, rotates above the contiguous disk to close the overlaping holes on the surface of the disks; to reduce the Size of the tank by dividing it, before any rotation or acceleration of the rocket. This will prevent slushings and protect the plumbing, if located 10% above the bottom section of each tank. Large telescopic pistons can be attached below the bottom of disk valves to control the fuel pressure as the piston expands into the fuel tank. I have built a model that works perfectly. The second disk valve can be located 10% below the front of the tank, to also protect the front of the tanks from the slushing forces. The gridfins are too flat and too small to be effective enough and will not be able to control the booster. Why is Elon not using four pins instead of three to secure each heat shield tyle? Four anchor points provide far more stability to secure a tyle, not three. Also, each type should be constructed with the bottom half of the brick consisting of an interwoven latice of steal mixed into the silicon, to provide a foundation of strength and durability to each tyle. What is more important than securing the heat shield by providing the maximum stability and strength to each tyle? The interwoven steal mesh lattice mixed into the bottom half of the bricks, and the four anchor points would eliminate the problems of tyles falling off the ship every time there is an engine ignition event. Please get this message to Elon. Thank you. Also, Spacex needs 3 actuators to move the payload bay doors correctly, not two. They have only two now, one at each end of the payload bay. They need one at the center position. Three will guarantee that there will always be enough support to open and close the doors, even if one of the three fails. I know the spacex engineers can see these problems. It is like ignoring the elephant in the room. The solutions should be a no-brainer. Musk needs to hire people who can be trusted and who will not continue accepting bribes from Jeff Bozo to sabotage and cause unnecessary delays to the Spacex Statship program.

ZZZZZZZZZZZZZZZZZZZZZZZZZZ

Is anyone else so sick to death of Elon Muskrat that it's starting to have a major impact on their excitement and interest in Starship development? He just poisons everything at this point.

What if catch arm actuator breaks during landing....? No redandancy?