It's HERE! LIAN LI EVO XL Review

No video

It's HERE! LIAN LI EVO XL Review

Рет қаралды 113,129

Күн бұрын

The EVO XL has finally landed and here's our ultimate review. We deep dive into the EVO XL covering differences to the original EVO, what's new inside, full custom watercooling support detailing support for both 360 and 420 configs as well as looking at the much improved upright GPU bracket plus more!
Stay tuned for our time-lapse build coming soon.
Learn more about the EVO XL @ - lian-li.com/pr...
Get yours @
Newegg
www.newegg.com...
www.newegg.com...
Overclockers UK
www.overclocke...
PCCG
www.pccasegear...
00:00 - Intro
02:09 - Dimensions | External differences
04:24 - Side Panels | Corner pillar removal and rigidity
06:31 - Power buttons | Adjustable front IO | Built in RGB
07:07 - Dust filters
07:19 - Moving inside the XL
07:43 - Motherboard support | Cable grommets
09:10 - Removable motherboard tray
10:29 - GPU clearances
11:04 - Included anti-sag bracket
11:42 - Waterblocked GPU support
12:10 - Tooless PCI
12:58 - Around the back | PSU location | Rear cable management
13:57 - Storage support
14:42 - Radiator support - Introduction
16:10 - Radiator support -360
18:38 - Side Radiator blanking plates
18:45 - Radiator support - 420
23:12 - Inverting the EVO XL
24:09 - Upright GPU bracket
25:37 - THE BUILD!
27:17 - Tooless PCI issue now fixed
28:54 - Potential 420 radiator issue
30:07 - Post build cable management around the back
30:52 - Reservoir and pump support
35:01 - About the build | Hardware used
41:17 - Who is the EVO XL for?
43:39 - EVO XL alternative? EVO RGB?
44:54 - Price | Availability | Outro
►Build Specs - Amazon US Store - amzn.to/2JzK5YN
Lian Li EVO XL
ASUS ROG Z790 APEX
Intel i9 13900K - amzn.to/3L7pCbt
G.Skill Trident Z5 DDR5 32GB 6400Mhz White Edition
ASUS ROG Strix RTX 4090 - amzn.to/3sSrjUa
Samsung 990 Pro 2TB x2 - amzn.to/3LdSbUN
Samsung 980 Pro 2TB x2 - amzn.to/3ErKOW3
Lian Li Infinity 140mm Fans - amzn.to/3R9Uc8s
ASUS ROG Thor P1200W - amzn.to/3Z4doX8
CableMod Pro Sleeved Cables - amzn.to/3KItXlt
►Watercooling
Alphacool Core 1 Aurora CPU Block - amzn.to/45BSD7J
Alphacool Eisblock Aurora RTX 4090 Strix + TUF GPU Water Block - amzn.to/3r0KVET
Alphacool 14208 NexXxoS UT60 420 x3 - amzn.to/3Z7Plqe
Alphacool Rise Flat Reservoir D5 with VPP755 Pump - amzn.to/3r0DygK
Alphacool Eiszapfen PRO HardTube, Chrome, 13mm OD - amzn.to/3snhlK0
Alphacool 90 Degree Rotary, Chrome, 4-pack - amzn.to/44f2T4a
Alphacool 18510 Eisrohr 13/10mm plexi (PMMA) HardTube Satin - amzn.to/45DZo8Z
►My Camera Gear
Sony A7SIII - amzn.to/3LIrbvT
Sigma 24-70mm f/2.8 DG DN - amzn.to/3CeCLMc
Manfrotto MK290XT - amzn.to/2HQAoiW
Manfrotto MVH502AH Pro Video Head - amzn.to/2JyX4dr
Zhiyun Crane V - amzn.to/2torSCQ
Edelkrone SliderOne V2 - amzn.to/3d1pVUm
Edelkrone HeadPlus - amzn.to/3gU2Uny
Edelkron JibONE - amzn.to/3iZYga5
Rode NT3 - amzn.to/2MpniNi Rode Lavalier - amzn.to/2LMq7a2
Rode Rodelink Newsshooter - amzn.to/2sVXRuu
MindShift Gear FirstLight 30L - amzn.to/2JEzdsA
Follow us -
Facebook - / ggflanparty
Instagram - / ggfevents
Builds.gg - builds.gg/user...
#LIANLI #EVOXL #GGFBuild

Пікірлер: 303

@Miezekilla 11 ай бұрын

these kind of water-cooling focused case reviews are unique and super helpful for anyone who wants to build a custom loop...thanks!

@GGFEvents 11 ай бұрын

No problem. Shame nobody else covers this type of content

@Jazzyluvsyou100 11 ай бұрын

@@GGFEventsyou are the best at this content

@GGFEvents 11 ай бұрын

@@Jazzyluvsyou100 thank you

@erikvc8148 5 ай бұрын

You can replace the motherboard with an ASUS ROG Maximus Z790 Formula@@GGFEvents

@davidp.3220 11 ай бұрын

Awesome review, not boring at all. This is the type of detailed review us DIYer’s dream of. I kept having questions as I watched, but you ended up answering them all by the end. Thanks!

@GGFEvents 11 ай бұрын

Thank you!

@johnnywoolen1453 11 ай бұрын

I appreciate all the detail you provide in your chassis reviews. There's no need to watch another one because you've already covered everything in FULL detail. We also get to see arguably the sickest build in that chassis towards the end of the video as an added bonus!

@GGFEvents 11 ай бұрын

Thank you

@LtColVenom 9 ай бұрын

Flabergasted by the quality of this review. Tons of details yet straight to the point. The meaningful information density is awesome. Thanks for your efforts. Highly appreciated!

@GGFEvents 9 ай бұрын

Thank you very much!

@hoyle038 11 ай бұрын

One hell of a beautiful case. So many options to watercool in. Never seen a case with so many grommets.

@0Metatron 7 ай бұрын

The engineering and decision making that goes into these cases must be insane, especially given that you can invert the whole thing!! Pretty mind blowing

@simoSLJ89 11 ай бұрын

The only thing that I would have changed is the fan support. The case supports 9x140 but only a 120 on the rear. Maybe is only my OCD, but at this point a rear 140 would have been visually better in my opinion.

@AlfaPro1337 11 ай бұрын

You're supposed to have intake bottom, and exhausting air on top. But yeah, it's an enthusiast case, it should have 140mm on all fan mount.

@constructiongeek4361 3 күн бұрын

Not even that, but if you were going to do 120mm on the back, than make it so you could fit 2 120's in the lower and middle positions. It looks so weird in middle with 1 120mm, and all that empty space you just can barely not fit the 2nd one.

@Bobblybook 11 ай бұрын

Thanks so much for the in-depth measurements and thorough watercooling support review. I glossed over a lot of the measurements for now, but will use this as a reference in the coming weeks when putting together parts.

@whoareyou56101 8 ай бұрын

I cant wait to get one of these. having the amount of space and future proof in one case is one of the biggest things for me. Also knowing that the aesthetics of the case is good too makes this case god tier for everything you need.

@slimeck25 9 ай бұрын

best, most informative pc case reviews I ve seen so far! exactly the detailed information I was looking for! no bs style-over-substance babbling like in many yt channels, and yet this one is waaaaaay more fun to watch. helped me a lot on my purchase decission. thanks.

@GokieKS 11 ай бұрын

Great review, very informative. The inability to customize the PSU and HDD cage location in the rear chamber is rather disappointing, but nearly everything else looks very well designed.

@garyc5245 6 ай бұрын

You will never have to apologize to me for long videos, every minute you take to point out your opinions is probably saving us regular folks time & money. Thanks for what you do!

@GGFEvents 6 ай бұрын

Thank you

@noodlegts 4 ай бұрын

Incredible review, was really helpful to see in a very practical way "how much radiator" this case can really fit. 3x420s is supported on paper wasn't sure it could actually be done!

@GGFEvents 4 ай бұрын

Thank you

@rainman8106 5 ай бұрын

your commentary and content in this review is exactly the kind of information i was looking for, and so now ordering this case...thanks

@01Gamemaster10 11 ай бұрын

I had the normal one and also the XL and Im now proud owner of de 3000 plus case. But I do still love those Dynamic cases, they are only to small for me now :P

@bothellkenmore 10 ай бұрын

Arguably the best front I/O on any case right now. I know you can bump up the standard EVO with an optional module to 4 type A's and that's prob what I would do since the XL is more than I need.

@Shinnok789 10 ай бұрын

Very informative review for this case and an awesome build with it too! Question: I got an idea for a black and white custom loop build, which the quick scene at 12:51 only reinforced :) This specific Lian Li O11D Evo XL case but in Black variant, black mobo, black rads - those form the "foundation". Then every other "secondary" piece connected to them , come in white or acrylic: - white fans all around, like Lian LI Infinity 140mm ARGB fans, - white or acrylic CPU block - graphics card with an all acrylic block and active back plate, - white RAM sticks, - white tube fittings, - trans-lucid satin tubes, - clear liquid or that milky mystic fog liquid from EK. - acrilic distro plate or flat pump+reservoir combo. - white or black+white custom cables. They will all stand out, pop, against the black background, especially with properly chosen LED lighting for the fans. Any chance you can do a similar build like this in the near future? With whatever components and case you can use, just to follow the same basic idea. I know it's a big ask but, aside from being incredibly useful to me and anyone else that fancies the B&W idea, it may end up being a cool and somewhat rare build to show off. Thank you!

@bloodybucket213 11 ай бұрын

Awesome coverage. Thank you. I'm finishing our company's new server in your white GGF Edition V3000. SO many features.

@MrAcuta73 11 ай бұрын

Not personally a fan of "fish tank" cases, but wow that's a nice looking case! Lian Li keeps knocking it out of the park. On that chamfered corner, could just paint the edge white. Might still look slightly strange, but at least it wouldn't be blue/green. Edit: Well, using blue/green lighting and fluid definitely was a creative way to take attention away from that glass edge! Genius!

@currentlykent4593 11 ай бұрын

I didn’t fall asleep!! Thanks for putting so much work into this review. I’ll be sharing it a ton when folks have questions on discord:)

@GGFEvents 11 ай бұрын

Thank you!

@gmachine10 10 ай бұрын

I have the ASUS WRX80 Sage Wifi. No one talks about it. So it’s super hard to shop for cases. You have answered all my questions! And earned my subscription!

@GGFEvents 10 ай бұрын

Thank you

@Alex-rf4wu 11 ай бұрын

I didn't understand half the things you said because I'm a noob that's too scared to watercolor, but it was a great in depth video. always love watching your videos! thank you!

@damientech88 11 ай бұрын

I've always bought Fractal cases but I bought a Lian Li IIO Dynamic EVO last year and it is incredible.

@evensen007 10 ай бұрын

Somehow I just found you and your builds/reviews, but goodness... BRILLIANT! I hope you could indulge me on just a couple of technical questions. 1. Do you find a cooling performance different with systems this powerful in a 2 vs 3 radiator setup, or is it just how you like to fill up the volume of the case? 2. Is there a reason you didn't use a 360 size radiator on the side so you didn't have to fiddle with a custom convert bracket? 3. I am having difficulty understanding the tube routing for that 3rd/side radiator. How did you do that? 4. What is the purpose of the soft tubing run that goes into the back side of the case? Where does that come from and go to and why? 5. Where have you situated the drain? Does it drain well? 6. In the past I have had terrible experience with dyed/colored coolant. Have you found that the newer formulas are more forgiving and easier to clean? Thank you SO MUCH for this review and build! You have given me so many ideas to work with.

@gorrestfump1237 6 ай бұрын

This was extremely comprehensive, 10/10 Overview of this case

@davidhowell9003 9 ай бұрын

By far! ...the best review of the Liam Li EVO XL I've seen on YT!

@tns6862 11 ай бұрын

Wow, thats like having a 420 MORA inside a case. Nuts

@TMBSlive 11 ай бұрын

Awesome job GGF. Great to have witnessed your journey from Computex to Review of this case. Thumbs Up.

@Lichtbaer 11 ай бұрын

Very nice review. You really showed everything I asked my self about this case. Thanks

@newCrysis 11 ай бұрын

Good to know Lian Li was willing to make sure of quality and customer experience before going forward.

@silentscope7440 6 ай бұрын

This is a very very good build. I just built mine with this case in black.

@bits2646 11 ай бұрын

I LOVE the review part, really detailed with amazing usecases, top work man!

@GGFEvents 11 ай бұрын

Thank you

@jinxyj08 11 ай бұрын

Not into this case but as always you are great at your craft. Watched it all for support. Will you be doing a BeQuiet! Dark Base Pro 901?

@GGFEvents 11 ай бұрын

Fantastic and thank you. Maybe in the future. Currently working on the Shadow base 800

@AusSkiller 11 ай бұрын

Thanks for such a thorough review! It was a great watch, very informative :)

@rodhester2166 11 ай бұрын

Would have been nice to have an option for icydock type hot swap drive bays where they had the hard drive bays,, seems they could have just flipped them around to 180 degrees.. that being said this case does have some nice details .. ( Thanks for all the time spent on this video )

@sumin889 11 ай бұрын

As always Awesome build and great review. WIll order 2 of these now

@bugatti4305 11 ай бұрын

upright mount the strix is so cool, look forward for a white upright build. Guess most pp looking forward this case is for upright mount the 40series gpu

@calldeltosell Ай бұрын

I have watched this several times yet I remain unclear of two dimensions on the vertical space for radiators. What is the depth of the reversible mount? If I push with a 1" / 25mm fan, will a 420 radiator clear the inner lip of the case. I understand the clearance at top and bottom. But I am thinking of chassis punching a hole under the drain on the radiator so that I can remove the dust screen to access it from outside the case. I don't think push-pull are functionally more productive especially since it will cost another inch. Yes the static pressure is greater as you increase the depth of the radiator, however, 10fpi is not a high loss configuration. 18 or 12fpi are more efficient but also have more drop. For extremely thick radiators, push-pull can make more difference -- and yet, you lose an inch (and the volume of water that goes with it). To go along with a deep rad, it may block removal of the trays. For me, I think that's less of an issue as I have never had a case with removable trays. I could be underestimating it however.

@honinakecheta601 9 ай бұрын

I’ve been looking for a case to upgrade from my 5000d, this case looks awesome!

@fallenlegion1828 10 ай бұрын

The issue with that gpu getting stuck IS NOT fixed on my case. My 4090 came flying out of the case trying to get it out. And now if course My gpu isn't being detected. So not sure what I'm gonna do now. Thanks lian li

@OldTimeFiddlerAEAE 11 ай бұрын

Thank you for this informative video. I would appreciate any additional comments from you or from viewers on using this case with the ASUS W790E SAGE SE motherboard. I am pleased you showed one in the case in this video, but I am uncertain as to the impact of being unable to secure the right edge of the board. I currently have a CEB sized board in the older XL model of this case. At the time I purchased that, Lian Li also offered an optional accessory to support full SSI-EEB motherboards in the original XL case. It looks like they are not doing that with this case. It's a shame as I think the W790E board has a real following and case options are limited.

@renzo908 10 ай бұрын

Great video. Lots of information gives me an idea of whether or not to upgrade my current regular size o11d lol

@sparkplugbarrens 11 ай бұрын

I am diggin the phat alphacool pump res combos in your recent videos!

@paskowitz 11 ай бұрын

EK makes white 420mm rads IIRC, but they are quite tall (but the cap ports are recessed, so it might be ok). Watercool just came out with white 420mm rads but only 30mm thick. So it's a bit tricky if you want to do an all white custom loop in a white EVO XL.

@GGFEvents 11 ай бұрын

EK white rads look awful in white Lian Li case as the whites are off but their ports are recessed

@paskowitz 11 ай бұрын

@@GGFEvents Good to know. I have yet to see their white rads IRL. It looks like the EVO is a cool white. Luckily the EK (and Watercool) rads are easy to paint as you can just take the side panels off).

@DrDAC-go7hs 11 ай бұрын

Fantastic video and review. Very exhaustive. You've gained a new subscriber!

@DGamerAriesArchives 10 ай бұрын

The price really shouldn’t give too much pause. Whether you are building modestly now or not, this case can easily last you multiple build upgrades. Especially considering the size, this is a case for someone that is going aio/fan airflow heavy or water loops and not someone putting a simple pc together.

@korneliuszrozestrzynski3534 Ай бұрын

Great job. Thanks for this advisor.

@oldmanian 11 ай бұрын

Awesome case and thanks for all the info. I’m hearing that Lian LI won’t be making a mesh kit for the front & that is a deal breaker for me.

@TheFlyingHeifer 5 ай бұрын

I wish you would show a vertical mount guide

@foulou2008 11 ай бұрын

yeah finally some stuff is coming ^^ but sadly that update...is just a bit on the minor side, few cm here and there and update fan size form 120 ->140mm (talking its about time) but i dont see really that "big" update

@1981kweber 11 ай бұрын

i wish i knew about this coming out before i bought my corsair 5000D case, this case looks so much nicer to build in for water cooled builds.

@hfcobra 11 ай бұрын

I would jump on a case like this if there was a 140mm version of the T30 or NF-A12x25. As it stands right now the performance of 120mm fans is just so much better than 140mm fans for radiators that the extra performance of the larger rads is significantly reduced due to the lower performing fans on the market. I do think that going for a 140mm rad is going to be a net positive on your performance but it isn't as much better than 120mm than it could be, which is disappointing.

@fun0537 10 ай бұрын

NF-A14

@alexanderking2226 11 ай бұрын

Holy case... This one is really beautiful and amazing case. Vertical GPU looks very good

@ReHWolution 11 ай бұрын

Flawless review as usual Stuart! On a totally unrelated note I've watched your V3000+ review so many times I almost know it by heart, it's probably gonna replace my 1000D as it seems to have a much better space management and customizability! :D

@GGFEvents 11 ай бұрын

Thank you. Oh that's awesome. Any questions let me know. Good luck!

@neeshrvlogs 11 ай бұрын

fell in love with the build ...my dream cpu

@Blafard666 11 ай бұрын

The size of this box is absolutely absurd ...

@harisjaved1379 11 ай бұрын

Lol you have never seen a caselabs case, my th10 says hi!

@datdudeinred 11 ай бұрын

@@harisjaved1379rip caselabs ❤️

@datdudeinred 11 ай бұрын

It's not for sff lovers nor for midtower fans.

@ChatGTA345 10 ай бұрын

I’m eagerly waiting to try Evo XL as a possible upsize from my trusty Mini, due to 420 support. I think that might be the only reason to go for this jump, if I want 420 without MoRA 😂

@thepopeofkeke 10 ай бұрын

@@ChatGTA345 the price is also amazing for what you are getting. I have been sniffing around the V3000s too tho. That case is even bigger

@osardegozar2581 11 ай бұрын

This case is not necessarily for water-cooling only. Provided that one mounts GPU upright, this case is more useful for someone using an air-cooler, particularly a tall one, than one using an AIO or custom water-cooling solution, for the adverse impact of heat from a horizontally mounted GPU on the performance of a CPU cooler is greater for a tall air-cooler than for any water cooling block on the CPU. Upright GPU mounting next to and apart from the motherboard is more helpful to air-cooler users as it alleviates this problem. (From this perspective, by the way, a viable alternative for this case is Silverstone Alta F2.) Let me also note that this case is also better than O11d EVO for NH-D15 users as you cannot reportedly close the latter's side panel if NH-D15 is installed. I do realize Lian-li primarily intended this case for water-cooling, but some air-cooler users also find this case attractive, more so than O11d EVO.

@Rouladen1 11 ай бұрын

No front mesh with 3 fans in front?

@mikeclark1326 11 ай бұрын

I just hope I can do two 45mm rads with push/pull on top and side

@goorthiss 11 ай бұрын

27:04 🤩Amazing build.

@akhmadhilmy979 11 ай бұрын

thing i don't like about this case is the storage compartment is no longer accessible from outside

@w3st80 11 ай бұрын

alphacool have those flush fitting caps for their rads, they screw in and there is no raised cap then.

@GGFEvents 11 ай бұрын

No. They only work with some of their newer items. Not the rads used

@rodhester2166 11 ай бұрын

hmm, wonder if some silver auto pin strip or any color for that matter would cover the edge of the glass and look okay if a person wanted to change the color scheme.

@CrazyCranker 9 ай бұрын

Having a hard time deciding between this and the V3000+. :( I wish there was something in-between with 480 rad support. Rough decision. Leaning toward the V3000+, it's super sized. :)

@lycandrengr5451 9 ай бұрын

Very informative video! Thank you! :)

@JentusPro 5 ай бұрын

Thanks for the very informative video on this crazy case)) I own today the first O11 that came back in a days, the Lian Li O11 Dynamic Black, and i like a lot this case, but i found myself that i will build for myself completely new system in this year (2024), i think when 15 gen intel cpu will come out. And i am starting to think now what and how i will be happy to see in my future new build, and the picture is starting to show in my head... I do not want to deal with custom water cooling, but i do want AIO like i did for the last 8 years, but in new system i want the 420mm instead of 360mm something like the Arctic Liquid Freezer III 420 with the big radiator (38mm) and push-pull config. As well i want to see in my future build 140mm fans all over the case instead of 120mm, and i want to see that i will able to install in the clasic way (horizontal) my giant RTX 4090 in the new case that will allow to do that without any tricks, like in the clasic O11 Dynamic i was needed to do, with some adapters and such, because the side glass panel just can not be closed... So i don't know, maybe i'm a bit crazy, but i think that for my future new build, i will buy this O11 EVO XL Case, and yes, this will be for most some standard build, just with 420 AIO with 100mm thickness (30mm fans, 40mm rad. and again 30mm fans, again - Arctic Liquid Freezer III 420), giant RTX 4090 installed horizontally as i like, and all other case fans are 140mm instead of 120mm. So how do you think, build like this can justify the purchase of this Lian Li O11 EVO XL?

@R2D2592 11 ай бұрын

The next great review and nice build. Thank you.👍

@WiFeYBurGLeR1 11 ай бұрын

I got the new EK front distro for my XL. I really want the EVO XL but after spending all that money for the distro, makes me re-think getting it. I wonder if i could mod it to fit?

@iikatinggangsengii2471 11 ай бұрын

yeah thats another hassle links prob dead

@CJAnders 11 ай бұрын

Now, I will be waiting on EK for a front distroplate

@LordComdrGC 6 ай бұрын

Awesome build. I have been trying to figure out which mount you used for the Alphacool Rise Flat. Those white studs are throwing me off. What did you go with here.

@NeogateAirkiller 11 ай бұрын

Hello, hope you are well, Amazing review, thanks, I was looking for that before buying the Lian Li evo XL. the only issue is about the rear fan, why dont they put a 140 mm fan ? But everything else is awesome.

@federicomeneghini9106 2 ай бұрын

You IFR and MML are the best youtuber ever I have a white build in my mind!!!!!

@quetzalcoaltjp 11 ай бұрын

Awesome review, thank you!

@sirfelix2020 11 ай бұрын

I would like to see the temps please. Thank you 🙏

@kharkaroto9486 11 ай бұрын

What a beautiful case. Unfortunately the motherboard looks a bit lost in there, need a bigger board.

@glennsjobom4370 10 ай бұрын

Love your chassi reviews, keep it up, you rox ❤

@Owenzzz777 11 ай бұрын

Seeing 3x Monsta installed together is so wild😂

@hoyle038 11 ай бұрын

I'm having a hard time choosing between the NV7 or the EvoXL....both are priced great and plenty of options.....

@malejoj4548 5 ай бұрын

Much appreciated S!!!!

@robin2thek 10 ай бұрын

amazing review. awesome build

@keywal 11 ай бұрын

Great review! Hard work but dam, it shows. Also LianLi really nailing the design - She's a beauty

@thatdiyguyraymondmonk1225 10 ай бұрын

Thank you. I do prefer full reviews far more than fast run-through or multiple videos to click thru….

@GGFEvents 10 ай бұрын

Thank you! Sadly not many of these types of reviews left

@thatdiyguyraymondmonk1225 10 ай бұрын

@@GGFEvents yes…. I am subscribing ]n to your channel… keep up the good work….

@TreyJays 11 ай бұрын

That build though! Goodness😍

@DoiGiayBay 11 ай бұрын

Thank you so much for this video 😁👌

@handyman1957 11 ай бұрын

Man, you nailed this! Thanks : )

@GGFEvents 11 ай бұрын

Thank you!

@joseperez-zo6fr 11 ай бұрын

dude your awesome for making videos like this

@GGFEvents 11 ай бұрын

Thank you for the kind words

@niftychap 11 ай бұрын

The white looks stunning, great review as always

@haies09 7 ай бұрын

Where did you mention about the GPU being difficult to remove e and Lian Li response?

@2quu 11 ай бұрын

We need amazing build in the case

@vapingtime3272 11 ай бұрын

Great in depth review, my o11 xl might be due a replacement! Question: What fluid did you use in the white lian li build?

@OguzhanlOzturk 11 ай бұрын

Love the build!

@mfdsuk 11 ай бұрын

No comparisons to the original o11 XL??? Please can you do a comparison of these. I have the original xl and there are shortcomings, especially the ventilation holes which are more metal then hole. Is this worth the upgrade or look outside of lianli??

@thatdiyguyraymondmonk1225 10 ай бұрын

Why is it they insist in tinting the glass on the black case ? If I want to tint the glass I can do it myself much cheaper than buying new untainted glass!

@Dexx1s 11 ай бұрын

I wasn't planning on getting this since I heard the price and knew that the bracket for a fan on the side to replace the glass was even more. Not having a cutout behind the motherboard is hilarious. Who thought that that was a good idea? The PSU in the middle doesn't make much sense to me compared to having ti at the bottom. The glass being harder to come off is a plus in my book. Don't Alphacool radiators now come with plugs that sit flush?

@GGFEvents 11 ай бұрын

Not all their rads and none in white

@dlbsyst 10 ай бұрын

Interesting as I have the black version and have no groove on the top or bottom to remove the back panel.

@tomasperoutkatp 11 ай бұрын

As always, perfect review, fantastic ❤ Pls, is there a choice of front mesh panel/kit? Same as on LianLi o11 Dynamic Evo? Have Dynamic Evo with mesh (and many external and internal radiators :) ) and its great choise... so its mandatory for me to have a mesh kit with dynamic evo XL, its perfect choise... thank you very much for response 😊 BB

@piecio3028 11 ай бұрын

Great job, great idea and execution.👍😁🍺

@GGFEvents 11 ай бұрын

Thank you

@Diego-dy5mw 11 ай бұрын

The perfect case doesnt exist... @.@ What a awesome build. On my opinion, I think the oversized radiator take much space from clear view about the "all", and its fun how every 4090 blocked look as a baby gpu, i prefer the "old horizontal bracket style" fliped with a that way you can see by the window the beatifull acrylic job on the block, otherside the AC pump/reservoir is wonderfull, maybe on the future a distroplate frontal or change by the "3rd" radiator byside. Congratz to you for a brilliant review and build, and LIAN Li for the amazing effort on this case.