It's like Bosch doesn't even care

Рет қаралды 449,871

Жыл бұрын

Bosch Axial Glide Dust Collection Chute: bit.ly/49O5beH
Full Shop: shopnationstore.com
Dust collection for this Bosch GCM12SD Dual Bevel Sliding Miter saw has been on my list for a long time and I've finally finished it! The popularity of this saw in the woodworking community means that many out there can benefit from a solution like this.
Thank you so much for watching and I would welcome any input or feedback. Here is to keeping that shop awesome.
Learn Fusion 360!
Product Design Online Academy - academy.productdesignonline.c...
Links to Referenced Products (some are affiliate links which help sponsor the content!):
-------------------------------------------------------------------------------------------------------------------------------------
EZ Dust Mask - tidd.ly/3YESc9A
Fastcap Zero Clearance Tape - amzn.to/3uXGkm0
Vacmaster "Beast" Compact 5hp Shop Vacuum - amzn.to/3v07BEk
Dust Right Dust Separator - amzn.to/3v0DrBc
iVac Pro Dust Collection Switch - amzn.to/3vzy76y
Digital Calipers - amzn.to/3olu4s0
Pentel Mechanical Pencils - amzn.to/3CEoK7x
Shop Nation Links:
----------------------------------------------------
Shop Nation Website: www.shopnationstore.com
Instagram (@dreamshopnation): / dreamshopnation
Timberland Pro: bit.ly/ShopNation_TimberlandPro
Thangs Support Community: than.gs/u/1284339
#mitersaw #dustcollection

Пікірлер: 1 100

@ShopNation Жыл бұрын

Thanks everyone for watching and giving some ideas for future saws to tackle! Links below for reference: Bosch Axial Glide Dust Collection Chute: bit.ly/49O5beH

@TS-hb6kx Жыл бұрын

Thx for making the stl's available for sale. Just bought them to print. Do you or anyone have a pointer to filament that is a close-ish color match like you showed?

@vickempA321XLR Жыл бұрын

I have the Bosch CM10GD. I'm ready to buy as soon as you get it figured out! Thanks

@kickboxingislife Жыл бұрын

P0 Pp00

@kickboxingislife Жыл бұрын

P0 Pp00 Pppp0000099 ppl pop pop opponents play ppl

@camerondrummond8283 Жыл бұрын

Thinking a more flexible material would help your project. Something stiff enough to return to its original shape on its own, but able to collapse or take on a shape created by the pressure applied by the base of the saw when doing miter cuts. So that the obstruction it becomes would become a non-issue because it would simply take on a new shape from the applied outside force, yet still be function able. Consider the same material used in the tip of that blue dust collection connector 1.53. You can squeeze that all day, it will always return to its original shape.

@sandan500 Жыл бұрын

As an engineer myself albeit much much older I am very impressed with you so much so I ordered your solution for my Bosch 12 inch miter saw. You are the kind of engineer I would want on my team, one who is hand on and continues to try and try until the best possible solution is found. Kudos to you.

@zimmejoc Жыл бұрын

Do I have a miter saw? Nope. Did I watch the whole video anyway? Yup.

@1975oldschool Жыл бұрын

LOL same here

@willcunningham8818 Жыл бұрын

Haha I have the Makita and watched this.

@raydriver7300 Жыл бұрын

I have a Charnwood and lust after a Bosch or Axminster 🌞

@Funknwanker Жыл бұрын

Get one, you won’t be disappointed.

@americanpatriot8402 Жыл бұрын

Now I want to buy a miter saw, just so I could buy this part. Shhhh. Don’t tell m wife. 🤫

@tighecrovetti2844 Жыл бұрын

Ordered. Gotta support people working this hard for the community!

@l.k.1011 Жыл бұрын

The comparison at around 11:30 is not really reasonable - with the standard dust collection (before) he is making an end cut, with his "improved" version a crosscut (after), knowing that a end cut is the most difficult one for the dust collection.

@ShopNation Жыл бұрын

@@l.k.1011 I agree, after shooting that was the closest similar angle I could get between original and improved. This is why I also showed the general state of the saws after all cuts as well, because that is reality. I did end cuts in all tests.

@Geppetto04 Жыл бұрын

Okay Travis now we need one for the Makita owners. Model 1016L would be a good start. Thanks.

@adamdaly7652 Жыл бұрын

Ordered, thank you for taking the time to engineer this improvement.

@bigjoe2458 Жыл бұрын

Did you get yours and put it on your saw? Let us know how it did.

@JANtheDane Жыл бұрын

Can't wait for your DeWalt version. I hate the mess my miter saw makes, and I too have not treasured making a huge box/tent behind the saw. Like you, my own attempts at fixing that issue have been difficult.

@a-carpenter9229 Жыл бұрын

I also can't wait for the Dewalt version. I just picked up a DW779 with free stand and have been messing with the dust collection. I added flashing tape to the flexible shroud so now it doesn't close in on itself and for some weird reason Dewalt put holes along the top of that black pipe that holds the shroud. I taped that up along with any small openings I could see to have maximum airflow running all the way to the front of the shroud

@thatsgreatt Жыл бұрын

Same here just bought the DWS779

@SteveWatson394 Жыл бұрын

Received the dust collector today. Installation was straight forward and quick. Had to try it. Hooked up the vacuum and dust collection worked as well as the video. Excellent design.

@josephlebo7320 Жыл бұрын

Consider my 10" Bosch version ordered whenever they're available! This is so awesome.

@mankney1 4 ай бұрын

I purchased this recently and could not believe the difference it made. I wrestled with my old dust collection for years. I am extremely happy with the purchase.

@bobmcarthur4150 2 ай бұрын

I love my bosch miter saw, because of the front slide action. With a small shop area ,it's a must have. But even with an extra vac hose by the saw, it's still dust everywhere. You my friend , have another sale, thank you for this much needed product.

@ta3355 Жыл бұрын

You’re a blessing to all makers using mitre saw’s! Thank you for your greatness…well done!

@kevindoyle4521 Жыл бұрын

That’s what I’m looking for! I was planning to make a bunch of changes to shelving to build the big box behind the saw, but not now. Thanks for taking the time to model and print all of these versions. As a retired M.E. I appreciate your approach.

@Luqman899 Жыл бұрын

I've got this saw and walked past the sawdust mess it made over the last few weeks. Not sure how Google knew I needed this but I'm glad this video was recommended. Many thanks for the work and effort you put into this.

@digitalbaka7722 Жыл бұрын

Waiting (semi-)patiently for the 779 to come around. Thanks for sharing the iterative process again. Always good to learn from the thoughts of others.

@meperson Жыл бұрын

This is fantastic example of engineering in real life. I don't even have miter saw but enjoyed your video!

@deanh2574 Жыл бұрын

As a retired automotive engineer, I designed and built a device for dust collection on my 14" Delta Bandsaw as the factory design was terrible at collecting dust. The design is over 90% efficient in collecting dust from the bandsaw, virtually eliminating clean up after making cuts and much better than other designs I have seen on KZfaq. I don't do 3D printing or computer design so I made my device using wood and salvaged plastic components. If you want the design to make a 3D version and use it for your channel and business, please reply back. I am happy to share this concept with woodworkers to make their hobby/business more enjoyable. The concept can be easily adapted into 3D plastic and used by anyone with a Delta 14" bandsaw with a cast iron table, however I am not knowledgeable on how Delta's cast iron bandsaw tables have evolved over the years. The design would have to be adjusted to fit other bandsaw manufacturers.

@sgbc3825 Жыл бұрын

I have this saw and for the last 3 years have tried hoses, tape, boxes, everything to help with dust collection. This is a great solution, just ordered it before the video even ended.

@JimHester Жыл бұрын

If it performs as well as the model you made for the Cruzer saws, Bosch owners are gonna be super pleased with this!

@ericblad5100 Жыл бұрын

I also have the Cruzer and the dust collection out of the box is HORRIBLE. Please work one up for that saw! :-). thanks!

@JimHester Жыл бұрын

@@ericblad5100 He sells one for the Cruzer. It's the first one made.

@ericblad5100 Жыл бұрын

@@JimHester Thanks! I didnt realize the Rigid was the same saw. awesome. I will be ordering right now.

@michaelault3180 Жыл бұрын

If suction could be added to the base in the slot of the clearance plate I believe it would improve dust collection. Kinda like a downdraft table for sanding.

@ShopNation Жыл бұрын

You would think so, but due to the blade rotation and angle of the teeth, there is really no dust forced in that lower cavity. Everything that ends up there is falling from somewhere else. I had a similar thought when I first started tackling these issues.

@polerin Жыл бұрын

Honestly what I am planning is a small (tilted) downdraft behind the saw as well, which I think might be more useful for capturing the dust that escapes collection at source

@ottoknottnerus6706 Жыл бұрын

The velocity of the air is made by the blade and bottom suction would reduce the direction of the air that is carrying the dust, this would make the system less effective. As an engineer I would suggest you smooth all the corners to streamline the airflow as it moves into the device. the sharp edges are causing turbulence reducing the air to carry the dust.(look at your fluids books from school) Smooth air will carry higher amounts of dust, so get rid of the corners and smooth them out with a healthy radii.

@lr90lsv8defender8 Жыл бұрын

The small Bosch gcm8 sde has a collection point and the end of that slot and one that moves with the saw the glide saw doesn't allow this which is actually a great collection system

@masseyferguson9195 Жыл бұрын

Makita did it with ots batter powered mitre saw.

@robtimberman6870 Жыл бұрын

Just ordered mine! I have been struggling since day one of buying this saw and it’s lack of dust collection. Love the saw, but not the dust collection. Thanks for taking the time to try out different configurations to come up with a solution that will be a huge improvement. Can’t wait to receive it and add it to my saw.

@SFMMGMarine Жыл бұрын

Travis, I have followed you for some time now, and am glad you decided to tackle the daunting task of dust collection on miter saws. I just ordered your 12" Bosch Sliding adapter and cannot wait to install it. THANK YOU for all you do and am anticipating all your future videos. I, like you are also continuously pursuing "SHOP GREATNESS!"

@andrewjonas5523 Жыл бұрын

Here for the dws780….anxious to see what you come up with. But I also wanted to remind you of the recall dewalt had, so you’ll have to either make sure it’s recall compliant or mounting has zero affect on the recalled pieces.

@greghowdeshell Жыл бұрын

+1 for the DWS780

@wannabefunnyman Жыл бұрын

I really enjoy your product engineering videos. More please :)

@jameswebb9738 Жыл бұрын

Great job! I’ve watched several of your miter saw dust collection debacle videos and while they were very informative and yes entertaining I can relate to the dust collection mess I encounter every time I use it. I’ve tried different things and none have helped much. Your persistence on this issue is much appreciated and again, great job!!

@briand6973 Жыл бұрын

Just got mine in the mail today. Super excited to get it installed so I can finally use this saw indoors. Thank you for designing it!

@danwaddy4490 Жыл бұрын

One more vote for the Metabo. Keep up the great content, I will be starting my shed project in the spring and will definitely be referencing your series. Thanks!

@kars2010 Жыл бұрын

Nice work Travis! So pumped for the DWS779!

@SFMMGMarine Жыл бұрын

Just installed your "Bosch Dust Collection Chute" ...all I can say is OUTSTANDING! Incredible quality parts and hardware, perfect fit, and extremely easy to install with your installation video..And now, testing. I did 10 cuts on a 2x4 with the stock chute and small vacuum. (My stock set-up.) Gathered up all the sawdust and it basically fit in the palm of my hand. After installing your "Bosch Dust Collection Chute" and making another 10 cuts, I may have had a teaspoon full! OMG what a difference! I am so glad I purchased this, my shop is half of a two car garage and was dreading making a dust box for the saw. I HIGHLY recommend this UPGRADE to everyone with a Bosch 12" glide saw. Thanks Travis, am one step closer to...."SHOP GREATNESS!"

@ShopNation Жыл бұрын

Good stuff 👍🏼

@moldyzucchinis3251 Жыл бұрын

This is my first miter saw and I went from waiting for the right fix to preparing my own design. Anyways, that can go in the trash now you are amazing. Never been so happy to see a youtube title

@zackkaufman7095 Жыл бұрын

Dust collection for the Metabo C12RSH2M 12 inch sliding would be amazing!

@johnkofonow Жыл бұрын

Please buy a DeWalt miter saw and design a chute for that one too. I'm sure you can make a ton of money on that one too (I hope).

@bradleykornele Жыл бұрын

Yes pre order the new sexy flexy version and get one these made 🙏

@scottstarek4996 Жыл бұрын

He says at the end of the video that dewalt is next. I'll be ordering one as soon as it's available!!

@bradleykornele Жыл бұрын

@@scottstarek4996 thanks must have missed this

@johnkofonow Жыл бұрын

I watched up to about the 12:30 mark. I missed the last minute when he mentions the DeWalt. Travis, thank you!!!

@brianowoseni5079 Жыл бұрын

I have this saw and I've been pondering how I'd solve dust collection when I rebuild my miter station. Thank you for saving me lots of work!

@jamiepavot1255 2 ай бұрын

received mine. Installed and WOW this is awesome!

@eliakyriacou9859 Жыл бұрын

+1 on the Makita LS1219 saw. I actually got rid of the Bosch, mostly because of the dust collection. Makita is so promising with the dual collection but let down badly when sliding. The small hoses probably don't help either.

@olivernash5630 Жыл бұрын

Another +1 for the Makita LS1219 Loving the effort on these problem solving projects!

@chrissewell1608 Жыл бұрын

Awesome design, tests, and completion! Kudos... I have the next Dewalt model 780, and am eager to see what you came up with.

@willemilysimmons7711 Жыл бұрын

Me too. Can't wait!

@haroldh9798 Жыл бұрын

I bought it and, after some challenges removing the old dust extraction, it went together in minutes. Brilliantly made and seems to perform as hoped!

@jerrybell1946 Жыл бұрын

After watching this video I placed my order for this unit. It arrived the other day and I installed it on my saw yesterday and was very anxious to give it a try. It works wonderfully and I am so pleased with its performance. This addition to this saw makes it so much better, thank you..........

@teac117 Жыл бұрын

As another mechie, try lining the inside with felt or another elastic collision absorber. The best would have been that elastic diaphragm (dental dam) that was used in router dust shields a while back.

@marcopugliares9309 Жыл бұрын

If you could make one for the Metabo C12RSH2M 12" sliding saw that would be awesome! Keep up the good work bud!

@CrossCut_Custom_Builds Жыл бұрын

Agreed I would order one immediately

@tjhardesty1720 Жыл бұрын

I’ve got a Metabo C12RSH2(S) 12” dual bevel sliding mitre saw. I don’t know the differences between this and the “M” above, but I’d buy one for my saw if it fit. And I don’t even have dust collection.

@jamespritchett4422 Жыл бұрын

I too would buy one for the Metabo! I’ve been looking online hoping someone would have a solution, but nothing so far. Thanks

@pookanielsen1212 Жыл бұрын

I would buy one too. I am not happy with my enclosure.

@warrenhunts Жыл бұрын

Another vote. I actually have the Hitachi, but it looks to be identical to the Metabo.

@davec3689 Жыл бұрын

I have put up with the dust from my 12" Bosch saw for 10 looooong years and bought your adaptor BEFORE I was done watching your video. Congratulations on a great design from one mechanical engineer to another. I wish I could shake your hand.

@markhopkins7204 Жыл бұрын

You have restored my faith in American ingenuity! Attention to detail is your primary concern and the end result is indicative of the effort. Thanks for sharing!

@sharirobinett3999 Жыл бұрын

I'm SO excited. I am looking forward to the 10" version ! I HATE the lousy dust collection! THANK YOU!

@kevinkleinmann Жыл бұрын

I second that!! 10" version!!

@pope52 Жыл бұрын

I’d be very interested in the 12” Dewalt non-sliding (DWS716), assuming the dust collection is different than the slider. If it is the same, you might make this clear when you do your videos to broaden the scope of interest. Thanks for your good work!

@bradgreenstreet8090 Жыл бұрын

I just bought this saw and am looking for better dust collection as well!

@lancechisum1529 Жыл бұрын

Perfect timing!! Thank you. I just got this saw on a Black Friday deal and have been so disturbed by the dust. This will be a boon to the dust problem!

@andrewmetts4622 10 ай бұрын

I'm an engineer. I was impressed enough by your approach that I ordered your chute for my Bosch 12" Glide Saw. I'm thrilled with it. While it doesn't capture every particle, it's a vast improvement requiring few sacrifices. Thanks for a job well done.

@jameshanley5004 Жыл бұрын

Would love to see you tackle the Milwaukee M18 10” mitre saw. The saw is a slider and the blade slides and leaves the collection point at the back of the saw! At full extension your blade is almost 10’ away from the collection. Would love to see what you could do with it.

@mortensentim511 Жыл бұрын

Looking at how much dust follows the original collection path even with the suction removed I would suggest you try going smaller, surrounding the blade as much as possible to focus the vacuum and give it as much suction as possible. Keep a flap to slow down anything going wildly off course and give the vacuum a chance to catch it. As much air speed as possible being drawn past the blade should help and that requires a smaller apature so long as the shop vac doesn't struggle. But small that is in practice and how that works out in the real world is another matter...It would be cool to have the chute work in every possible use though.

@pastameatball Жыл бұрын

Great to see you making a solution for Bosch. That’s my dream saw. Whenever I step up to it I’ll be sure to grab this dust collector. Thanks!

@upsidedown1972 Жыл бұрын

I ordered this a couple weeks ago. Just got it. Install took literal minutes. And holy heck does it ever work. Well made, well done. This is festool level dust collection.

@chris.pekarsky Жыл бұрын

Love watching the whole design and troubleshooting process. If you ever decided to make one for the Metabo C12RSH2/C12RSH2SI would be happy to ship mine your way temporarily so you can use it to go through the process.

@randallwoodward5542 Жыл бұрын

Agreed! I'm hoping you can make one for the Metabo/ Hitachi 12"

@davidbryant7773 Жыл бұрын

Awesome design! +1 for the 10" Bosch version. Eagerly waiting for it's availability Have you looked at extending the sides of the flap so that they extend further?

@yellowrainer Жыл бұрын

I just bought this and installed it on my saw. It works great! I was able to integrate it into my current dust collection system.

@WasatchBarnWoodworking Жыл бұрын

Just got it and installation was a breeze. Works fantastic !!! Thanks for taking the time to design and good luck on your new shop space.

@DamirS2K Жыл бұрын

This is cool. Seems like you've engineered a better dust collection system than the company. Might wanna shoot them an application haha

@darrellhayworth456 Жыл бұрын

I'd love to see a chute for the 10" Makita dual bevel. I love its sliding mechanism. The articulating arms on the rigid/ Bosch seem overly complicated and prone to deflection

@DIYHGP Жыл бұрын

A second Makita 10 inch

@MD-en3zm Жыл бұрын

Makita 12 inch too. That said - the Makita is already somewhat better than the bosch and ridgid, as it has 2 separate dust collection chutes. Maybe both can be used to even further improve the collection.

@lmartinez300 10 ай бұрын

Ditto

@Itsnotmethistime 11 ай бұрын

Got mine recently and I'm very impressed with how much dust this captures. Great work!

@williamnasser8404 Жыл бұрын

Ordered. Thank you for solving this issue with issue with an otherwise wonderful saw.

@glennm449 Жыл бұрын

Finally! I cannot wait for the 10 inch version. Love the Bosch axiel glide but hate the dust. When the 10 inch is ready take my money!

@TimEpperson Жыл бұрын

Me too! I love my saw. Travis, you rock dude. Thanks for all you do. As an electrical engineer, I like the iterative approach. It gives the best answer with some compromises but best for the 80%.

@michaelmielcarek9104 Жыл бұрын

ditto

@bonykneez Жыл бұрын

I would also buy the 10” version as soon as you have it available!

@tonytownsend7973 Жыл бұрын

Great solution! My son will be starting college in the fall of 2023 and plans to major in mechanical engineering. He is not a woodworker but I will be sending him the link to your video so he can see the kinds of things mechanical engineers do. Thanks for another great video! Keep up the good work.

@mosbyjon Жыл бұрын

I have this same miter saw and have been watching you struggle with the (miter saw dust collection) for months now with different miter saws, Ill say one thing about you, Bygod you are persistence. My hats off to you. Once you modify and close in that open space, Im pretty sure you have it licked and most likely IF,,,,, l can afford one, ill buy one

@michaelnobles8400 Жыл бұрын

Any plans for a dust collection solution for the HERCULES 12 in. Dual-Bevel Sliding Compound Miter Saw sold by Harbor Freight?

@stevecourtney3625 Жыл бұрын

Love your work! I'm very Interested in purchasing the BOSCH 10" dust chute (hopefully your next project?)

@stoobe 26 күн бұрын

So cool! Love that you solved the problem for yourself and created a 3D printed solution you could sell. Just bought mine.

@uffekrog Жыл бұрын

Love that someone is actually tackling this issue competently and thoroughly!! I’m the happy owner of a Metabo KGS 315 Plus. I would love your take on that!!

@patrickramsey3299 Жыл бұрын

I have tried multiple methods to improve the dust collection on my miter saw. As such I’m very interested in you designing one of these for the Festool Kapek 120 . If it worked as well as the one you just demoed , I’d buy it in a heart beat.

@ShopNation Жыл бұрын

That saw has the best dust collection of any saw out there!

@patrickramsey3299 Жыл бұрын

@@ShopNation while that may be it still leaves an enormous amount of dust. Will you attempt to improve it?

@matthewbauer89 Жыл бұрын

How long did all of your iterations take to get from concept to v8.1? That doesn't come across in the video how much time you spent. I think it's great and I am curious to know roughly what demand on your time it took start to finish.

@ShopNation Жыл бұрын

I’ve been at this for probably 3 weeks, doing it in parallel with other activities (I.e. shed)

@matthewbauer89 Жыл бұрын

@@ShopNation I appreciate the information and I am digging the shed build as well. Thanks for what you do.

@bicyclerider3978 Жыл бұрын

This adaptor works better than expected. I’ve recently had to consolidate my work space and having control of the debris is a must. Highly recommended.

@jeffwilson6724 Жыл бұрын

I plan to use this in conjunction with a catch box. I'll run a 4" line to the box with a 2.5" tap to this chute. Should get pretty much all of it that way. Outstanding engineering and presentation. Ordered immediately after the video, and this wasn't the first one I watched. The quick removal feature totally sold it.

@surebrah Жыл бұрын

This saw needs a a shadow light. I tried to buy something on Etsy, but it was total shit. If you made a fix for that, I'd buy it.

@ShopNation Жыл бұрын

🧐

@matthewbauer68 Жыл бұрын

Just pre-ordered mine! So glad you tackled this saw's dust collection!

@wmpiehl Жыл бұрын

Always look forward to a new Shop Nation video. Especially like when you get your engineer on and I get to learn a bit about engineering in addition to the shop aspects. Thanks!

@jamiepavot1255 4 ай бұрын

Ordered! LOVE this!!!

@MasonWoodshop Жыл бұрын

This is amazing! I had the 10" version of this saw up until a couple of weeks ago when I moved to the Makita LS1019L, primarily for the dust collection, and haven't been disappointed. Saw itself is very comparable to the Bosch CM10GD and with your addition, I imagine dust collection would be similar.

@crazyethanyeahyeah 8 ай бұрын

Terrific video! I'm currently in the market for a new miter saw, and your video came up as I was researching Bosch miter saws. I believe your video shed light on the recent updates to the Bosch Miter Saw, specifically the GCM 18V-216 DC model, and the improvements they've made in dust collection - dual dust collection. Greetings from Down Under, Ethan in Australia.

@johncallaghan8854 Жыл бұрын

Ordered, received, installed absolutely incredible mod for this superb saw. I was very disappointed with the dust collection of this saw when I first bought it, and had tried a couple of "DIY" mods, but the improvements were very minimal. Your adaptor is night and day, got to be close to 99% collection now. Thanks for a great, well made product at a very reasonable price. You've turned this saw into a much greater tool.

@j2mccoy Жыл бұрын

Travis, thanks for tackling the dust collection dilemma that so many of us have endured and the manufacturers seem to ignore. I purchased your collection chute for the Ridgid and look forward to getting up and running. Always enjoy your videos...looking forward to the next one.

@Tensquaremetreworkshop Жыл бұрын

It is not that they ignore it- it just doesn't sell saws. And a good one is liable to user damage, warranty claims, etc. Probably most are used without dust collection anyway.

@CMDR_Elizium51RA Жыл бұрын

I have this exact miter saw and I appreciate the work you put into this. Fantastic!

@andressalas4266 Жыл бұрын

Just purchased this saw and came across your video. Definitely buying one. Shop goal is too improve dust collection across the board. This will definitely help!!

@WasatchBarnWoodworking Жыл бұрын

Ordered...Been waiting patiently ever since you did the Rigid for you to figure out the Bosch. Looking forward to getting it and trying it out. Thanks for the hard work !

@robertwalker8400 Жыл бұрын

Oh, this is awesome! I've had this saw for a few years. I love the saw but, I hate the mess. Going to order this and give it a shot and support a great channel!

@migmagingenieria 5 ай бұрын

That Bosch miter saw is one of the best and most rewarding tools I've ever had..!!!!

@donaldgilbert6599 Жыл бұрын

Just received it and it is better than expected, Absolutely fantastic upgrade to a very good song. I would recommend this to anybody who has the Bosch glider

@donaldgilbert6599 Жыл бұрын

That was supposed to say, saw

@glennsmith2762 Жыл бұрын

I have a miter saw, I have an ok dust collection system. I watched your video for 1 reasons 1) I like your content and the way you present it. I find it both entertaining and helpful. 2) o want/need you to keep putting out videos so I watch them all, to do my small part to keep you going.

@RDAUGIRD Жыл бұрын

Just installed my dust chute and tried it out. Even with a portable Ryobi cordless vacuum cleaner that only has 80 CFM I’m very impressed. If you’re on the fence, definitely get one!

@randyp792 Жыл бұрын

0:18 just got the part today, construction and accuracy are spot on, works as stated. Completely satisfied, thanks

@glencoe8251 7 ай бұрын

You have done really well with your end product.

@benjaminblaisdell Жыл бұрын

Christmas came early!🎉 Been waiting for this for a long time now. I appreciate the attention to details and can’t wait to have a more tidy space in the garage. Cheers!

@lordkarellan7808 Жыл бұрын

Beautiful! Ordered mine! Doing a built in entertainment center this February/March. So, perfect! Thanks!

@eddiesmith6096 Жыл бұрын

I’ve had this saw since 2015 and like it a lot. The dust extractor thing broke off of mine the first day I used it. I’ll definitely be ordering one of these

@flatlander523 Жыл бұрын

Got mine the other day and installed today. Installation went great as you explained. A couple of comments: 1 Just about lost the wee bity spacer for the guard arm when I removed it, but I caught it before it scurried under the bench. 2 item is the RH FWD blade guard screw was hiding behind the motor wires. Removed the blade cover and 2 mount screws to rotate the cover fwd and that exposed the hiding screw. Ops check went grreat!! Thanks for tackling this!!😁

@alanbutler Жыл бұрын

Just purchased! Love my Bosch Saw. Can’t wait to receive mine! Love your videos brother

@billybike57 Жыл бұрын

Been following this build, you’ve put in the time and it looks like your about there. Well done!

@andrewbrown8148 Жыл бұрын

This looks great, Travis~! This Bosch is the saw I've been looking at to replace my older Dewalt 12" non-sliding saw. I'll definitely be ordering one of your dust chutes when I pull the trigger on the saw. Greatly appreciate your persistence in working this solution~!

@PhilipHollowaychannel Жыл бұрын

Just ordered one. Looks like you have covered all my thoughts. Well done

@jimgott119 11 ай бұрын

I bought one and I like it. It works really well. The one improvement I would make is to blunt the little screws that hold on the flap/curtain. If something gets caught in the opening and I reach in to fish it out, OUCH! I solved it myself by grinding them down while in place with a Dremel cutoff wheel so now it’s smooth inside.

@furfoxsake Жыл бұрын

Awesome I've been waiting for something like this for such a long time! Definitely ordering

@alreadyfalling Жыл бұрын

purchasing now, been waiting for someone to fix this problem for me haha. Awesome job and thank you! 3D Printing power!

@laurenceturner9346 7 ай бұрын

I spent some time working on this with a well know brand, Having a full cad model of the saw definitely makes life a lot easier. Some of the best solutions had a really big flap of rubber.

@toddsawicki Жыл бұрын

I literally bought the Ridgid Saw b/c of Travis's dust chute solution - I just got the chute and OMG it is beyond game changing. If his Bosch (and eventually DeWalt, Makita, etc) do the same, then I can strongly endorse this for everyone's saws.

@rla1000 Жыл бұрын

Phenomenal solution. I was deciding between the Bosch and DeWalt 10-in. saws as I already have a raft of 10 inch blades for my table saw and really have no need for a 12 anyway. Although very partial to Bosch tools as my shop is full of them, I had heard some negative comments about Bosch's articulating arm not holding true, ended up with DeWalt 717. When it arrived it was obviously a resale - it was loose in the box, no internal packing, literally bouncing around with a hole where the handle had broken through. I had little hope for it but was astoundingly perfect out of the box, so to speak. The 717 dust control isn't too bad with a vac on it as is. But I'd love to see what you come up with for DeWalt. Thanks, great video! - PS, I subscribed because I like how you do your videos. Straight forward, no BS, no music, well articulated.