This plugin has been so fun for sound design experiments! It's really unique and intuitive. Great video too!
@MattiasHolmgren4 ай бұрын
Hey Dash, long time no see. Hope you are good. Yeah totally rocking this plugin. Super fun and quick to work with. Btw. We got to setup that collab sometime soon. 😄🤘 Thanks 🥁
@adirsab3 ай бұрын
I think u can do this for ages with IL Harmor, except the morph thing..
@MattiasHolmgren3 ай бұрын
yes there are multiple other resynthesis plugins that converts audio files into sine waves, Alchemy, Harmor, Icarus etc. But it's indeed the realtime morphing, twisting and turning the sound as it plays which I think is kinda unique and really makes the goosebumps for a sound designer nerd. ;)
@shawkatnomat56222 ай бұрын
hi, thanks for the great video. Wondering how can I record the sound from ViSCO on my DAW, which is Cubase?
@MattiasHolmgren2 ай бұрын
You can bounce the audio or… Recording VST audio to another track in Cubase involves routing the audio from a VST instrument or effect to an audio track. Here’s a step-by-step guide: 1. **Create Your VST Instrument Track:** - Open Cubase and create a new project or open an existing one. - Go to `Project` > `Add Track` > `Instrument` and select your desired VST instrument. - Record or program the MIDI data on this track if it’s not already done. 2. **Create an Audio Track:** - Go to `Project` > `Add Track` > `Audio`. - Choose the appropriate settings (mono or stereo) based on your VST output. 3. **Route the VST Output to the Audio Track:** - Open the Mixer (F3) or go to the Inspector for your VST Instrument track. - Look for the `Sends` section in the VST instrument track. - Add a send and select a new Group Track or a specific Bus (if it’s stereo, select a stereo bus). 4. **Create and Set Up a Group Track:** - If you used a Group Track, create one by going to `Project` > `Add Track` > `Group Track`. - In the `Sends` section of your VST Instrument track, route it to this Group Track. 5. **Route the Group Track to the Audio Track:** - Go to the Inspector for your Group Track. - Set the output of the Group Track to the Audio Track you created earlier. 6. **Enable Monitoring and Record:** - On the Audio Track, enable monitoring by clicking the monitor button (a small speaker icon). - Arm the Audio Track for recording by clicking the record enable button (a small red circle). - Start recording in Cubase (by pressing the record button in the transport panel). 7. **Record the VST Output:** - As Cubase records, it will capture the audio output from the VST instrument on the Audio Track. 8. **Playback and Check:** - Stop the recording and disable monitoring on the Audio Track. - Play back the recorded audio to ensure it captured the VST instrument correctly. ### Additional Tips: - **Latency and Monitoring:** Be aware of latency settings to ensure there’s no delay in the recorded audio. - **Effects and Automation:** Any effects or automation applied to the VST track will also be recorded. Make sure your settings are as desired before recording. - **Exporting:** If you need a final mixdown, you can use the `Export` function to bounce all tracks, including the recorded audio, to a single audio file. By following these steps, you should be able to successfully record the audio output from a VST instrument to another track in Cubase.
@loudcloud14994 ай бұрын
so neat!
@Forever-89-Studio4 ай бұрын
🙌
@IAmDofosho4 ай бұрын
I noticed that you have the new Nektar CS12. I. know it's designed to work natively with Logic Pro, but can it be mapped to other daws? have you tried to use it with Bitwig yet?
@MattiasHolmgren4 ай бұрын
Oh yeah I’m full on working on the new Bitwig Ambient Music course which will launch early access very soon. I haven’t had time yet to check CS12 with Bitwig, but I’ll give it a go as soon as I tuck my youngest kid Alexander to sleep. 😄🤘☕️🥁
@MattiasHolmgren4 ай бұрын
Hi again, unfortunately the CS12 doesn't even wake up when I select it as a "controller" within Bitwig or any other DAW than Logic Pro. It seems at it's current firmware it's Logic Pro only....and that's also how it is marketed. It's not intended for other DAW's. It's specifically designed for Logic. Which is a great thing IMO, I always wanted something solid to control Logic with. And this is it!.... that said, it would have been great at least to be able to use the knobs for general CC, and the transport buttons. ;) And maybe the volume fader. hehe... We'll see what happens.
@IAmDofosho4 ай бұрын
@@MattiasHolmgren Well that sucks for other DAW users. I appreciate you checking on this for me!
@jellycoding4 ай бұрын
I watched with much interest until you started talking about distro-scam. It's well known how they screw artist. Thumbs down! And now I see you're from Sweden... how disappointing.
@MattiasHolmgren4 ай бұрын
In what way did their service fail on you?
@jellycoding4 ай бұрын
@@MattiasHolmgren Just Google it or do a youtube search about it and you will see how horrible their so call service is.
@jellycoding4 ай бұрын
@@MattiasHolmgren I did answer this... did you remove it?
@MattiasHolmgren4 ай бұрын
I did not remove anything.I was asking you about how their service has failed on YOU, not about what others think. Do a reality check… and try their service first yourself before you start nagging. Trolling… 🤷♂️🥁😂🤖
@jellycoding4 ай бұрын
@@MattiasHolmgren Ok somehow it looks like you know what I wrote... LOL. Just google it and find out about their horrible way of treating people. If you are stuck in their "business" I feel sorry for you. I KNOW how that feels.
@Kahlertmusic4 ай бұрын
can do all of that with sample grouping in ableton and switching inbetween them with velocity automations. nobody needs this thing
@MattiasHolmgren4 ай бұрын
Well, Not nearly the same as morphing though. 🤷♂️😄
@Kahlertmusic4 ай бұрын
@@MattiasHolmgren exactly the same.
@MattiasHolmgren4 ай бұрын
Lol, not so much. This is sound resynthesis, it rebuilds the sounds with sinewaves. And reversing / inversing the sound algorithm ”mid playback”. Not possible with Ableton default devices. 🤷♂️😂 I’m by no means trying to defend the company, just my objective observation on how this plugins works, and what’s possible. Though I might be wrong, but as far as I know, Ableton does not have a resynthesising tool converting audio sample to sinewaves. Fl studio has Harmor, Logic has Alchemy. 🦊
@eyeque74 ай бұрын
@@KahlertmusicI'm afraid he is right..
@boimesa8190Ай бұрын
Go ahead and do that 😂😂 I'm sure u enjoy wasting ure time@@Kahlertmusic