for almost $500.00 they should have supplied the water pump along with the necessary tubing.

The holes along the deck are called scuppers, they are intended to drain the deck 🌞

I used a similar water pump in my rc boat for forced cooling - it too started to clog from debris and tiny pieces of weeds. I tried blowing it out - no luck. You need to disassemble it and clear the small check valves. I’m installing a small inline filter canister filled with mesh to filter the incoming water without too much restriction.

This has lots of upgrade potential, and it's big enough to handle rougher water

I bought mine maybe a month back. I like it’s relaxing to move around the water.

That looks so relaxing. Glad you found the water issue which, really, wasn't that much of an issue :)

Looks like they should of put a lip around the hole in the deck and the hatch cover should of set down over it to keep the water out, would be a easy fix. Great video thanks.

Good tips on the leak issue Greg mine does the same thing same area we must have had the same qc person during production lol 😉👍🚢

I have the Atlantic harbor tugboat the original tugboat you’re s is awesome

Many thanks for the review~~ How did you take out he shaft to grease this boat?

Hhmmmm might have to try this one since I have 3 ponds I can walk too. Thanks for the leak work. Those can be a pain to determine.

Nice video, helped me get off the fence and order one... and the Water Cannon Pump. You may have made a difference by raising the water-in-the-bilge issues as my boat remained dry during both a "bathtub test" and during operation on a nearby lake. Like yours, neither my tug or the water pump included tubing... could you please let me know what size you used? Also, there's a grease fitting on the propellor shaft stuffing box and you will want to run a length of tubing from that nipple to one of the hatches so you can pump Marine Grease into it. I also got the Dynamite Marine Grease and Grease Gun kit... but, there's no tubing included in it either... if you can, could you let us know what size tubing can fit that nipple and let us know? One tip I would like to pass along... You should install a "Sea Strainer" in the pick-up line between the hull and your water pump. I plan on using a rc fuel filter. Also, after running the pump, remember to back-flush the system with tap water. Thanks, Bruno ⚓

That looks like a fun chill time. did you notice a big power drain when running the pumps? great video as always.

0:52 holes= WASHPORTS , to let water off the low rear decks of a tug . May be fitted with doors or flaps to let water out , but not in ! Wales UK

Will the water pump work with the lights on? I’m only seeing one spot for either or to plug into

Hi RCDriver-Online, the hatch looks, like it can be easily sealed with tape and in choppy water, it should be good, if the water can not just easily on the deck, but also off the deck.

My tug should be here Friday and I was very concerned about that water issue as this is my first rc boat. I definitely feel better about it after seeing this video!

What would you say about putting a metal mesh in front and back of the propeller housing?

Nice boat 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

Hello, is there a function in the remote control that shows a low battery level or is there another way to show a low battery level? And one more question: is the water shooting function available immediately or do I need to buy something else?

Can we get a maintenance video on this?

love the videos, are you gonna take the new typhon tlr to the track soon? And also are you gonna do another videoa on the radix 4?

anybody know whats the part number for the pump controller?

How many cell battery what mah and how long is your runtime

Looks like silicone air line tubing for aquarium

Scuppers there called

Maby you can install a smal fuelfilter between the line and the pump

I bought that same pump I put it in but it doesn't want to boot The water and the pump could you help me to see what it is

On mine, one of the canons definitely has more pressure than the other one. Any remedies?

Hey there ,awesome review on the tug boat...its something i need...! Can you also do a thorough review of the Miss Geico 36"v2 catamaran i dont think you ever done so...would be a cool idea...keep up the awesome work,aslo sub'd to your channel...🤙🤙🤙

Looks like you could use the pump as a bilge pump if the water flooding problem continued.

I'm hoping to get rc tug boat Saturday if I still negative n not positive

Those holes are called "FREEING PORTS".

What is the scale size of this boat and what "real life" tug was it modeled after please?

Ne posseggo 1 anche io e'molto divertente!!!!!

My dad has one we named it tuggy 😅

Tug boat

Got my pump hooked up but can't seem to get CH3 to do anything

Freeing ports

side holes are called gunells

your pump hose connection is wrong, the hose that comes in from the water pick up goes to the inlet line directly in front of the battery, the one with the needle. while the fire hydrant is connected unto the line out located on the side of the pump.

Its missing sound

You hooked up your water lines wrong on the pump, but you didn't say anything about it! You'd think that HH could add a foot of hose for the pump after charging $57 for the pump.. For anyone thinking that the pump may be broken bcz the white tip is off on the suction side of the pump, it does come off, so it ok..

I'm sure I'm not the only one still "on the fence" about this boat. While the leak problem is "fixable", there shouldn't be any need to. The real problem is a "manufacturing problem", and one that Horizon Hobby/ProBoat NEEDS to address. The location where water is coming into the boat airways to vary from boat to boat, telling me that ProBoat has a serious 'inconsistency' problem in regards to the gluing of the hulls & decks together. The consumer should not be the one needing to fix the problem - that is Horizon Hobby's/ProBoat's responsibility. As for the operating water cannons...yeah, I still think it's cool. But, at the same time, Horizon Hobby has really overpriced it. $50 for a water pump...even if it does have a mounting bracket for installing it in the tug...is WAY too much. Most consumers are intelligent enough to realize this. For those (ie. 'reviewers') who've received them free, they don't need to even concern themselves with the price...and HH/ProBoat knows they'll do an excellent job of "pushing sales"...but, it's STILL something that has been priced higher than it needed to be. The TRUTH is, it could have been included with the boat, the tug could have still been sold at the same price, and HH's 'manufacturing cost' wouldn't have increased all that much. Put another way, if the pink were to be included with the tug, actual manufacturing cost would have only increased by approx $5. Yes people - that means HH/ProBoat was making approx a $45 profit on the water cannon pump. The reason I say "was" is because HH recently increased the price of the water cannon by an additional $8 (but the tug, itself, is still $450), thus increasing profit by an additional $8. I understand the increases in the high-dollar items, but such huge (percentage-wise) increases in lower-proceed items is just "money grubbing". In the meantime, until something better comes along and/or until HH stops being so 'greedy', I'll continue using my converted ProBoat Shockwave as my 'rescue boat' - ultra-low 1050kv brushless motor, SeaKing 60 ESC, dual rudders (yes...a rudder to the right, and to the left, of the prop), and two water pumps (which I purchased for less than $15 each) keeping the motor & ESC (separate water lines for each, one from reach rudder) really cool. The hardest part of the 'conversion' was determining the most optimal prop to use (ended up with 3-blade 45mm w/ 1.6 pitch).

These RC boats are very expensive for what they

DONT SWITCH ON the pump in DIRTY water, It's hard to fix. And DONT expect this boat has a lot of power, he cannot push UL-19 back, try tire a wire on Tug boat and pull.

First

Anyone happen to know the signal distance? Thanks RCD. Based on your review I’m going to get it…and NOT tell my parents.