DIY Drum Sander For Drill Press | Quick Sandpaper Replacement - NO GLUE

DIY Drum Sander For Drill Press | Quick Sandpaper Replacement - NO GLUE | XDIY

Рет қаралды 252,268

2 жыл бұрын

I made a homemade spindle drum sander / spinning sanding drum for my drill press, for for sanding holes, edges, contours and irregular shapes.
In my drum sander, I made it easy to replace the sanding papers, and without glue usage.
What do you think about the video and result? write me in the comments.
Watch my DIY Woodworking Projects -
• DIY Desk with Drawers ...
The tools & accessories that I'm using - www.itzikdiy.com/tools-list?m=1
#xdiy
#xdiy_with_itzik
#itzikdiy
#diytools
#diytool
#drumsander
#sandingdrum
#drillpress
#spindlesander
#homemadetool
#woodworking
🔔 Subscribe and click the bell, so you won't miss any new released video! 🔔
/ @xdiy
Thanks!
Credits:
* Construction Tools Image Designed by macrovector / Freepik - www.freepik.com
* Emoticon Icons Designed by rawpixel.com / Freepik - www.freepik.com
תוף ליטוש למקדחת עמוד - עשה זאת בעצמך

Пікірлер: 60

@XDIY 2 жыл бұрын

If you like my project, please hit the thumbs up on the video :) What do you think about the result? Write me in the comments The tools & accessories that I'm using - www.itzikdiy.com/tools-list?m=1

@vaporiste Жыл бұрын

Does it hold securely with no screws? I presume the width of the slot must be ajusted very well?

@XDIY Жыл бұрын

@@vaporiste After I cut the slot with the saw, I looked for a piece of metal that will fit a bit tight, to hold the paper well. In addition I added one screw on the top to secure the metal better (due to the high speed of the rotation).

@tfturning Жыл бұрын

Great job, I have been wanting to make one of these for a while! Really like the use of the piece of metal to clamp the paper. Thanks for sharing! 😁

@XDIY Жыл бұрын

Thanks! :) I want to improve it later and add a bottom support with a bearing, in order to prevent the push the drill press chuck from the side...

@YoureNowOnTV Жыл бұрын

Getting the paper to hold onto the core was what I was trying to find a solution for. Nice work. Thanks for sharing! 😀👍

@XDIY Жыл бұрын

Great! Thank you.

@dan_rozen 4 ай бұрын

1:30 Nice magic! 😀

@engineer3112 10 ай бұрын

This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@XDIY 10 ай бұрын

The dremel is here, but no dremel press yet 🙂 kzfaq.info/get/bejne/o8t4ldOUuOC0dGQ.html

@user-uf3kj8fo4olaijos41 5 ай бұрын

Super!

@XDIY 5 ай бұрын

Thank you! 🙂

@smithpianoservicing3421 6 ай бұрын

Great job

@XDIY 6 ай бұрын

Thanks!

@josemanuelmonjeguillen7266 11 ай бұрын

Good idea

@XDIY 11 ай бұрын

Thank you!

@user-zvo 10 ай бұрын

Молодец👍

@XDIY 10 ай бұрын

Thanks!

@keithdavison5578 4 ай бұрын

Yes i do like your video brilliant ill get out there and make one many thanks👍👍👍👏👏👏

@XDIY 4 ай бұрын

Cool, thanks! 😊

@wayned5872 2 ай бұрын

Good idea for the roundy round sander

@XDIY 2 ай бұрын

Thanks 😀

@Cahsolotree 3 ай бұрын

Creative and inspiring people. Thank you so much

@XDIY 3 ай бұрын

Thank you friend!

@Cahsolotree 3 ай бұрын

@@XDIY you are wellcome bro....

@luizcarlosvital5178 Жыл бұрын

Bom Dia, exatamente o que eu precisa aprender, valeu !

@XDIY Жыл бұрын

Obrigado também!

@clebertonalves2161 8 ай бұрын

🇧🇷 Muito bom!!

@XDIY 8 ай бұрын

Thanks 🙏🙏

@GLHerzberg 10 ай бұрын

It would be beneficial to add another metal strip to the opposite side of the cylinder to help balance the drum and reduce vibration.

@XDIY 10 ай бұрын

Thank you! I actually added a bearing at the bottom and a base which holds the bearing and the drum sander, to make it more stable. (I didn't have time to edit but I plan to upload part 2 of the video when ready)

@Kultakala_Design_Studio 2 жыл бұрын

כל הכבוד 👍

@XDIY 2 жыл бұрын

תודה רבה! סופ"ש טוב.

@user-cb1gd9cd5h Жыл бұрын

I see that you are also a fisherman. You have so many bamboo fishing rods behind the machine. Good luck with everything!

@XDIY Жыл бұрын

Thank you man! 🙏🙏

@lesd2633 7 ай бұрын

I purchased a set of 4 size drums at harbor freight for 15.00.

@XDIY 7 ай бұрын

I know I could buy... but I love to create :) Anyway, in this case I made additional improvement and added a bottom support with a bearing, in order to prevent push of the drill press chuck from the side. (I need to edit the video and publish, didn't have time yet). I assume that the ones you buy doesn't have this support, so here I can customize it for any need.

@b3arwithm3 10 ай бұрын

Isn't this bad for the drill press alignment?

@XDIY 10 ай бұрын

I actually added a bearing at the bottom and a base which holds the bearing and the drum sander, to make it more stable. (I didn't have time to edit but I plan to upload part 2 of the video when ready)

@silasgroenning 6 ай бұрын

So when paper is done, and you have to change, the screw must be unties, and screwed in again i. The same hole. So that gives it a short timespan, becsuse the holes will not fit the screw after short amount of paper change? Perhaps some threaded insert to screw a bolt into, rather then a metal screw to wood?

@XDIY 6 ай бұрын

You're right, but meantime since it's not soft wood and I don't tighten the screw forcefully, it's still works fine. But your idea to use insert or so, is good, but I think it will require a thicker wood to have enough room for the hole. I'll consider it next time. Thanks!

@silasgroenning 6 ай бұрын

@@XDIY do you think the wood could be replaced with a metal pipe for long lasting threads then?

@XDIY 6 ай бұрын

@@silasgroenning I'm not sure I understood. Replacing the wood with an empty pipe? You need a full material without a hole. (unless I didn't understand correctly... :) )

@silasgroenning 6 ай бұрын

@@XDIY yea i understand for the metal piece/clamp ti push against something to tighten.. perhaps, some cleaver welding could make this out of a metal pipe.. it would just if possible, giev it longevity.. i was just wandering if the metal would be to hard a material to push against, but its mere speculations. .. like.. the softness of the wood, would make it more easy to finger ninja the pieces you hold, or perhaps the hard profile of steel does not make any difference on the subtle how-it-feels… i hope you understand me now :)?

@vaporiste Жыл бұрын

Il me faut un marteau comme le vôtre 😂

@XDIY Жыл бұрын

Le marteau magique 😃😉

@user-un2xp9bw2l 4 ай бұрын

Идея крепежа хорошая, но требует дороботки

@XDIY 4 ай бұрын

Thanks :)

@user-ri2ws8to7t 3 ай бұрын

Старый якорь от коллекторного двигателя --- мучаться не надо.

@XDIY 3 ай бұрын

😁

@IcaNavisah 7 ай бұрын

769

@XDIY 7 ай бұрын

And this means what? :)

@andrewlees1749 Жыл бұрын

im rather concerned how much rope/string/wire is loosely hanging near your drill press!

@XDIY Жыл бұрын

Thanks for the warning! The drill press was moved to another location few months ago.

@MrFelipefelop 3 ай бұрын

It would be better if you looked after your drill stand dont you think,then the rest will follow 😢

@XDIY 3 ай бұрын

I agree with you... but I don't have a drill press (yet). It my father's and it's placed outside in the yard so it got rusty... sometimes I go there when I need it.