No video
iWire Fuel Pump Controller Hardwire Kit Install Video - Single Pump Kit
Рет қаралды 14,568
Күн бұрынIn this video we go over how to install the iWire Fuel Pump Controller Hardwire Kit for Subaru's with a single pump, stock fuel pump hanger, and bypass stud kit. We make hardwire kits for many applications so please check out the links below for product details.
Fuel Pump & Hanger Removal and Reinstall in a Subaru Video - • Fuel Pump Hanger Remov...
FPC Hardwire Kit Products:
Single Pump with Stock Hanger: www.iwireservi...
Single Pump with Radium Hanger: www.iwireservi...
Double Pumps with Radium Hanger: www.iwireservi...
Full Install Guides:
Stud Bypass Install - 4c98cab5-1179-...
02-07 Stock Hanger Single Pump - 4c98cab5-1179-...
02-07 Radium Single or Double Pump - 4c98cab5-1179-...
08+ Stock Hanger Single Pump - 4c98cab5-1179-...
08+ Radium Single or Double Pump - 4c98cab5-1179-...
iWire Blogs on Fuel Pumps and Fuel Pump Controllers:
Upgraded Fuel Pump Controllers Explained - www.iwireservi...
Two Pumps are Better than One - www.iwireservi...
Bypass Stud Kit - www.iwireservi...
iWire Best Sellers
FPC Hardwire - www.iwireservi...
Wideband - www.iwireservi...
Grounding Kit - www.iwireservi...
Speed Density - www.iwireservi...
MAP Adapter - www.iwireservi...
AVCS - www.iwireservi...
DCCD Controller - www.iwireservi...
iWire Videos:
Subaru Engine Guide - • Subaru Engine Guide - ...
H6 vs STi Engine Comparison - • Subaru STi vs. Subaru ...
Bulkhead Dash Harness Removal - • iWire Bulkhead Dash Ha...
iWire Merge Harness Install - • iWire Subaru Wiring Ha...
iWire Wiring Videos:
Merge Process - • iWire Subaru Wiring Ha...
How to Depin a Connector - • How to Depin a Subaru ...
How to Crimp a Terminal - • How to Crimp a Terminal
How to Install a Pigtail - • iWire Pigtail with Cri...
How to Fix your Alternator Plug - • Alternator Plug Instal...
How to Depin a Gauge Cluster Plug - • How to Depin a Subaru ...
How to swap a WRX into an RS - • Bucky Lasek WRX into R...
iWire Blog Posts
Subaru Do’s and Don’ts - www.iwireservi...
My Engine Blew Up, What Should I Replace It With? - www.iwireservi...
Best Engine Choice For Your Swap - www.iwireservi...
#fuelpump #subarufuel #fuelsystem #subaruFPC
@iwiresubaruwiringsolutions5538 3 жыл бұрын
0:28 - Kit Components Overview 2:41 - Remove Interior Trim and Run Battery Cable 9:00 - Remove Back Trim Pieces to Access the Fuel Pump Controller 11:28 - Fuel Pump Controller Module and Jumper Install 17:20 - Ground Wire 18:31 - Bypass Stud Kit Install 33:46 - Reinstall Fuel Hanger into Car 38:15 - Add A Fuse 40:50 - Battery and Circuit Breaker 43:52 - Testing and Troubleshooting 45:10 - Tidy Wires and Reinstall Trim 49:18 - Tuning 49:45 - Fuel Pump Comparison Details 52:11 - Stock vs Upgraded Fuel Pump Controller
@BradMazur Жыл бұрын
Im in the middle of installing this in my 2006 Forester XT. Here's a few notes so far: 1)make sure the add-a-fuse is oriented properly. I used fuse #14 and the hot side is on the bottom, therefore the pigtail needs to be oriented up. If not, if that fuse blows, it'll break the circuit to iWire relay. 2)the forester cargo cubby gets in the way of any of the convenient mounting locations so you have to get creative to mount it securely. I drilled a hole and made a bracket out of aluminum bar 3)if you're upgrading your pump and it didnt come with an install kit like the aem 340, make sure to buy an install kit that includes at least the rubber isolator. My OEM one disintegrated badly. I ended up buying a $15 fuel pump on Amazon that came with the isolator, new hose clamps, hose and those pre-filter retainers (i just chucked the pump it came with) 4)might as well replace the fuel filter if it's the original while you're in there
@OnTheGasPack 3 жыл бұрын
I cant wait! Im going to put this in my car this weekend!
@fredastaire6156 10 ай бұрын
This video is super helpful with showing how to run the wires through the car to get to the fuel pump controller. However, I have an 04 STi, and just swapped out my OEM metal fuel hanger for a Radium dual pump hanger. I want to run dual Walbro 450s can your fuel pump controller kit do that without having to drill into Radiums Aluminum hanger? Do I have to instal the bypass on the Aluminum hanger or does the wiring kit for the dual pumps come already plug and play without having to drill into the Radium Aluminum hanger?
@jayssubi 8 ай бұрын
Hoping they answer on this
@matthewpowell8284 2 жыл бұрын
You sir are doing good things
@msintern99 3 жыл бұрын
Next do the secondary pump setup.
@iwiresubaruwiringsolutions5538 3 жыл бұрын
It's on the list :)
@kchanguito 3 жыл бұрын
Please do I’m about ready to install my with hub switch
@murderedsubie1517 Жыл бұрын
@@iwiresubaruwiringsolutions5538 any update?
@iwiresubaruwiringsolutions5538 Жыл бұрын
@@murderedsubie1517 Do you mean our double pump hardwire kit? - iwireusa.com/collections/iwire-plug-and-play-harnesses/products/fuel-pump-controller-hardwire-kit-for-radium-hangers-double-pump
@FROSTXCLIPS 3 ай бұрын
@@iwiresubaruwiringsolutions5538 I think he did just bought the kit for my Wrx would love and install guide for double but gonna watch this vid and see if I can make do with this vid
@dennydellaca6403 2 жыл бұрын
Soon as you get this back in Stock I'm Buying One. 05 Outback. Having Fueling Issues...Runs Out at Top RPM. Should be Pushing North of 400hp. Currently only hitting 360hp with what I'm sure is a Low Fuel Pump Voltage Issue. That AEM340 going to need all it can get running E85. Hopefully you get your Stock. I would buy one today. Cars Currently sitting at the Performance Shop waiting for this Fuel Pump Wiring Upgrade🤦♂️
@rockytopridr7463 2 жыл бұрын
I'm doing this on a 02 WRX bugeye but, I do not see the small ground wire on my fuel pump for the stud bypass kit. Does this not get used in the 02-07's?
@iwiresubaruwiringsolutions5538 2 жыл бұрын
That correct. You do not need that wire. Clip it short to the connector.
@richardplut142 2 жыл бұрын
i have a question the fuel pump wiring that sits in the tank. What type of insulation is that made of? is it Teflon/ PTFE or is it something else/
@iwiresubaruwiringsolutions5538 2 жыл бұрын
It's ETFE since we use Tefzel for the wire and the extra sleeve is Raychem DR-25.
@Milokicks Жыл бұрын
With a 95 GF8 and a DW400 how do you make the stud bypass work? The fuel pump hanger is all metal. Will those small bits of plastic prevent it from arcing? Build 1681
@iwiresubaruwiringsolutions5538 Жыл бұрын
It'll work all the same as the 02-07 WRXs with the metal hanger. cdn.shopify.com/s/files/1/0460/3822/0953/files/39dc8e_265b355d59fa4215906a5b8fc1a010b8.pdf?v=1636933777
@Milokicks Жыл бұрын
@@iwiresubaruwiringsolutions5538 awesome thanks! Finally finishing the build.
@jbarnhill50 2 жыл бұрын
Do you have a diagram of how your system is. I been having issue with harness I bought myahe a year ago and just want to back trace it's a 08 wrx
@iwiresubaruwiringsolutions5538 2 жыл бұрын
Hi, thanks for this question. Please send us an email to info@iwireusa.com with the issues you are having and we can help you troubleshoot
@johnbfm8264 3 ай бұрын
Does the hard wire kit comes with the studs?
@iwiresubaruwiringsolutions5538 3 ай бұрын
Yes, it sure does!
@travisgallegos9363 Жыл бұрын
Why wouldnt you do a dual set up? Running a single pump relay is easy
@iwiresubaruwiringsolutions5538 Жыл бұрын
We offer a kit for dual pump as well and our standard single pump kit is prepped for dual pumps if you change your mind later. iwireusa.com/collections/iwire-plug-and-play-harnesses/products/fuel-pump-controller-hardwire-kit-for-radium-hangers-double-pump?variant=41189188894873
@rockytopridr7463 2 жыл бұрын
Just did this on my 02 bugeye and finally did my first start last night on my new build. I am having issues with my fuel gauge not working. I'm assuming I did something wrong? Are there any common mistakes made that cause this or issues?
@iwiresubaruwiringsolutions5538 2 жыл бұрын
If it's the fuel level gauge sometimes the floaty gets stuck up when you reinstall the hanger. If it's something else please send us an email to info@iwireusa.com so we can assist you.
@rockytopridr7463 2 жыл бұрын
@@iwiresubaruwiringsolutions5538 Thanks! I'll pull the fuel pump and check everything out.
@goblazers4435 2 жыл бұрын
What would change, or how would you power the second pump, if you're running two pumps but one is just a pickup for the in-tank surge tank?
@iwiresubaruwiringsolutions5538 2 жыл бұрын
The second pump is run on an on/off switch. Surge tank would be completely different wiring than this kit.
@goblazers4435 2 жыл бұрын
@@iwiresubaruwiringsolutions5538 I'm dropping this into an 05 STI. Would I treat the lift pump as basically a 2nd pump (as in just buy two of your wiring kits)? Or is there anything special I should do for the lift pump? Thanks!
@iwiresubaruwiringsolutions5538 2 жыл бұрын
@@goblazers4435 Please send us an email to info@iwireusa.com so we can chat specifics about your build and get you the custom wiring kit you need.
@global_Jesus 5 ай бұрын
So where's the video for the f a model?
@iwiresubaruwiringsolutions5538 5 ай бұрын
Standard kit does not work with 2015+ WRX and 2014+ Forester due to Fuel Pump Controller Design. Please contact us for current solutions we offer.
@mike63ful Жыл бұрын
Thank you for your video, I have a drain on my battery with the car off from the power feed to fuel pump controller relay. I have the Visconti set up with the 525 pump , any idea what could be causing it ? I
@iwiresubaruwiringsolutions5538 Жыл бұрын
Hi Mike are you using our hardwire kit with the Visconti basket?
@mike63ful Жыл бұрын
@@iwiresubaruwiringsolutions5538Thank you for your response, Im not sure I had a shop install everything .
@iwiresubaruwiringsolutions5538 Жыл бұрын
@@mike63ful If you have our kit you'll need to make sure the add-a-fuse is in the correct location. If it is not, it can cause the relay to stick open and drain the battery. Page 44 cdn.shopify.com/s/files/1/0460/3822/0953/files/39dc8e_f6d050a5904240aaa0d52c5c161e2bc5.pdf?v=1636933854
@mike63ful Жыл бұрын
@@iwiresubaruwiringsolutions5538 I confirmed with the shop they do use your hardwire kit . Thank you again. I will have to check that out.
@mike63ful Жыл бұрын
It looks like the red relay trigger wire is plugged into slot 23 on the fuse panel 16 STi .Which fuse panel slot should it be in on a 16 STi ? Thanks
@tadstanczyk8316 2 жыл бұрын
You wouldn't happen to know what battery mount/bracket that is do you? I'm trying to search and find it...
@iwiresubaruwiringsolutions5538 2 жыл бұрын
Yes we can help with that. meledesignfirm.com/
@kalkapahulehua4839 2 жыл бұрын
L for love - average joes
@zillerw 2 жыл бұрын
What fuel pump hanger is that?
@iwiresubaruwiringsolutions5538 2 жыл бұрын
It's OEM/Stock Hanger from the STI
@TheE3R 2 жыл бұрын
Routing it, is it the same in a 15 STi plataform?
@iwiresubaruwiringsolutions5538 2 жыл бұрын
Yup, this video will work for the 15+ STI as well
iWire Subaru Wiring Solutions
Рет қаралды 12 М.
iWire Subaru Wiring Solutions
Рет қаралды 15 М.
Smeedia
Рет қаралды 18 М.
iWire Subaru Wiring Solutions
Рет қаралды 25 М.
ChrisFix
Рет қаралды 16 МЛН
iWire Subaru Wiring Solutions
Рет қаралды 1,4 М.