IWISS Powerpole Ratcheting Crimp Tool | But is it good??
Рет қаралды 15,675
3 жыл бұрынA great, inexpensive crimping tool for Anderson Powerpoles.
Get it here: amzn.to/3my84rL
K8MRD Radio Stuff Shirts:
Happy Skull Guy: grapevineamateurradio.com/col...
Tower of Terror: grapevineamateurradio.com/col...
Follow me on Twitter. / k8mrd
Here's a bunch of links to stuff I use.
Yaesu FT-891:amzn.to/2XaTkof
Xiegu X5105: amzn.to/2U4jrtM
Xiegu G90: amzn.to/30fszPD
Bioenno BLF-1203W: amzn.to/3bXsRhP
Bioenno BLF-1203AB: amzn.to/39OAW74
Bioenno BLF-1206A: amzn.to/2XaWQ1L
Bioenno 20AH LiFePO4 Battery: amzn.to/2XfZPWT
Bioenno 12AH LiFePO4 Battery: amzn.to/2WHU9kp
Bioenno Charge Controller: www.bioennopower.com/collecti...
Battery Charger: amzn.to/2YARsSt
Rich Solar 100 Watt Panel: amzn.to/3enp4vD
Carhartt Lunch Box: amzn.to/2xQfbGO
Shakespear 20' Wonderpole: amzn.to/2Rd9IiG
Powerwerx Power Pole Crimping Tool: amzn.to/3eDbpSo
Powerwerx Power Pole Distribution Block: amzn.to/2WHI3Ym
Powerwerx Volt Meter: amzn.to/2IG8AAw
Ailunce HD1: amzn.to/35HqBYZ
Baofeng UV-5R: amzn.to/2Ot3NX7
Tactical Backpack amzn.to/2k6jya7
Condor Rip EMT Pouch: amzn.to/2XjLUPG
iPad mini Bluetooth Keyboard: amzn.to/2IOtI7o
Red Rock Outdoors Sling Pack: amzn.to/2FdCKdf
Portable Operating for Amateur Radio Kindle: amzn.to/2X3I7EU
Portable Operating for Amateur Radio paperback: amzn.to/330xW7J
I may make a small commission on purchases made through the links above.
Be sure and subscribe to these great channels:
Ham Radio 2.0: / hamradio20
Ham Radio Crash Course: / hoshnasi
KG6HQD: / @kg6hqdjerrysota
N0SSC: / n0ssc
K6UDA Radio: / k6uda
K8MRD Radio Stuff: / k8mrdradiostuff
Signal Search: / channel
Ham Radio Now: / hamradionow
Kyle - AA0Z: / kyleaa0z
SevenForty1: / sevenforty1
100 Watts and a Wire Podcast: 100wattsandawire.com
DX Commander: / m0mcx
W6RIP Radio Adventures: / 11dayscrape
The Smokin Ape: / thesmokinape
Goodgame Ham Radio, Bees, and Outdoors: / goodgamehamradiobeesou...
Temporarily Offline: / temporarilyoffline
K0LWC: / k0lwc
#andersonpowerpole
@steveburg5273 3 жыл бұрын
A ham throwing out a 2 ft section of wire? Yeah right.
@hamradiotube 3 жыл бұрын
It was only to add drama lol! I still have it, of course.
@hamradiotube 3 жыл бұрын
That is seriously one of the best and funniest comments ever on the channel!! It’s getting pinned for everyone to enjoy.
@ae1tpa92gwtom2 3 жыл бұрын
I was thinking the same, like most everyone im sure, cheers
@mistermurtad2831 3 жыл бұрын
That can be used for a 2M, 1.25m or even a 70cm dipole!
@HowToHam_Tom 2 жыл бұрын
I actually gasped! and said out loud (to the dog in my otherwise empty room) “HEY-I’ll take that if you don’t want it”
@IWISS 3 жыл бұрын
Thanks for choosing IWISS. This crimper was designed specifically for Anderson Powerpole connectors. Each jaw cavity crimps certain AMP connector only, so choosing the correct cavity is very important.
@hamradiotube 3 жыл бұрын
Wow thanks for watching! Great crimper. Thanks for the explanation, however I am very aware of my crimping flaws haha! Really happy with your crimping tool.
@IWISS 3 жыл бұрын
@@hamradiotube No problem, Mike. You'll find a way to work with it peacefully. Thank you for the great video.
@hereusethis 2 жыл бұрын
Hey @@IWISS, it would be awesome if you sold or marketed (and maybe you do, but I can't find them for sure) additional dies for this model. The MC4 crimp is basically a half-Anderson. The overlanding folks use these two crimps the most
@BobCollins42 2 жыл бұрын
I have these IWISS crimpers, and they failed me today. I was crimping AWG14 wire in a 30A terminal, and the wire pulled right out. I was even able to reinsert the wire into the "crimped" terminal, and over crimped it using a Klein 1005 crimper. Terminal fine now, but maybe I should have just used the Klein to start with?
@ChaplainDaveSparks 4 ай бұрын
Are the PowerPole dies also available for other models of iWiss crimpers, or do I need to dedicate a crimper just for Power Poles?
@espeechoochoo Жыл бұрын
Also bought this crimper last summer on Amazon. Finally did my first crimp tonight with help of your video. Our Freemo Std RR club requires the PP-30 for 5-wire interconnection. Thanks for sharing instruction. Just a little tricky snapping the connector into the housing.
@andrewfiertek5937 3 жыл бұрын
I’ve had this model for a couple of years now without any issues. Works great!
@hamradiotube 3 жыл бұрын
Great to know it lasts. Thanks for sharing.
@billcrow5403 3 жыл бұрын
Glad you made this video. I’ve been looking to get one, and there are so many out there I didn’t know what to get. Thanks for doing this!!
@hamradiotube 3 жыл бұрын
Awesome glad it helped.
@mikemurphy1940 3 жыл бұрын
I bought the West Mountain Radio crimper back when Hamvention was still in Dayton. I’ve crimped hundreds of power poles. For $40, you can’t go wrong. - KI8R
@hamradiotube 3 жыл бұрын
Dang I didn't know they had one for $40. I'm sure that's a good one. With your hundreds of Powerpoles crimped, you are well on your way to Powerpole level Jedi too!!
@scottlogsdon5607 11 ай бұрын
I have the Dent-De-Lion that I got off of Amazon and it's been FANTASTIC for over 200 sets of power poll connections. I found it easier to drop the tip into the crimper 1st then close down one click not to press the fitting. Then insert the wire and with the single click on the crimper it holds everything in place. Then crimp down on the 30 then pull it out and crimp it in the 15 for a tighter fit. Then I always use the rubber boot and heat shrink on the end for a really good connection.
@HowToHam_Tom 2 жыл бұрын
Thanks for the Best one of these videos I’ve watched. Others spend Minutes showing how to hold everything in all sorts of contorted ways to make sure the wires are aligned perfectly in the right direction. They’re ROUND for gosh sake. YOU seem to get it. Crimp, twist to align, Snap! And get on with your day. The tip about the little “A” was brilliant too.
@c.f.leffen2929 3 жыл бұрын
Thank-You, Sir. I’m making a list of what I need for my future HAM shack. All the Best to You and Yours!
@hamradiotube 3 жыл бұрын
Awesome! Thank you!
@RegNatarajan 2 жыл бұрын
All the other powerpole crimping videos I just looked at were out of focus and/or shot from useless angles. Your in-focus and close-up camera work made this a really useful video for me.
@hamradiotube 2 жыл бұрын
Hey thats great! Glad you enjoyed it.
@joecraft4409 3 жыл бұрын
I have one pair of crimpers. I use them for all crimping situations. (They may be old Klien crimpers) No jaws to replace, crimps all sizes. These are probably 20-30 years old. For power poles, all you need to remember is the crimped area needs to stay "round" in shape to fit into the power pole housing. I crimp it as usual, then turn the crimped area 90 degrees and crimp it "lightly" using a toothless crimp area to round it out. Works on 15, 30, and 45 amp power poles. Havent had a failure to date.
@hamradiotube 3 жыл бұрын
Hey, whatever works. I crimp so many power poles I just like having the crimper for them. Thanks for watching. 73
@OttoDestruct 7 ай бұрын
100% clicked the link from your Anderson Power Pole install vid. These are gold. Thanks from a new Canadian ham. :)
@hamradiotube 7 ай бұрын
Awesome, thank you!
@AlanElBee 3 жыл бұрын
Thanks Mike, this was helpful as I was on Amazon looking at the sea of crimp tools.
@hamradiotube 3 жыл бұрын
Glad it was helpful!
@mrjikey 3 жыл бұрын
This is one of those rare moments I don’t have to buy something new after watching a review of it... Got that exact set last Christmas after ruining several Powerpole connectors trying to get it done the cheap way (without the proper tools). Been a great addition.
@hamradiotube 3 жыл бұрын
Well not so fast there Mikey, you only have one. You need 2 lol!
@mrjikey 3 жыл бұрын
There is that saying, “two is one...” With that logic I need another HF rig now that I sold my 450D. Know anyone selling their 705 ;) ?
@hamradiotube 3 жыл бұрын
@@mrjikey I don't think you're going to see those on the used market any time soon. You def need backup HF rigs for sure though. One for the shack, one for the car, one for portable, one for the living room...
@mrjikey 3 жыл бұрын
@@hamradiotube Lol! Being single has its perks, but I think I would starve... My wife loves to cook and and if I were single I’d end up spending all my food money on radios... That 705 though would pair nicely with my new 7300. May have to sell one of the kids...
@gac5329 3 жыл бұрын
I Lol'd at the talking power pole boot.
@hamradiotube 3 жыл бұрын
Haha, great! Gotta keep em fun.
@hamradio1017 3 жыл бұрын
That is what I have bought for my first and only crimper and it has worked well for me so far.
@hamradiotube 3 жыл бұрын
I like it so much I bought another type of crimper from iwiss. Really happy with them both.
@hamradio1017 3 жыл бұрын
@@hamradiotube I can't remember if I got coax crimpers from them. But the Amazon stuff have worked well for me.
@N2YTA 3 жыл бұрын
I have that exact same crimper however mine is unbranded. When I put power poles on a small gauge wire I strip a little extra and fold it over so the connector has more to crimp on.
@hamradiotube 3 жыл бұрын
Oh yeah I've done that too. Gotta make it work somehow.
@raymondlewis2055 2 жыл бұрын
I had just bought that crimper before I saw your viddeo. Glad it works well for you, maybe this klutz will get it to work also. Thanks for all your videos, Mike. I have learned a lot. 73, AA4EZ
@electron4784 Жыл бұрын
Contact crimping hack I have used for years. Crimping to smaller diameter wire in a contact? You can cheat buy doubling the stripped length and folding the stripped wire in half. then Insert into the crimp zone of the contact and complete the crimping. I would not suggest folding wire to fill the crimp more than once. But to each their own. Just a suggestion.
@BadHorsie2 3 жыл бұрын
That is the same set of crimpers that I have. I have used them for a long time they work pretty good!
@hamradiotube 3 жыл бұрын
Good to know!
@jptucsonaz8503 3 жыл бұрын
Good video; but a major error! After the construction; always, Always, ALWAYS!!! TEST the power plug with a meter to ensure proper polarity! DO NOT RELY ON wire color bands to be correct! They build cheap stuff today by barely skilled workers. It's also a double check of your own work. It's easier than replacing a radio worth well over $1000!
@hamradiotube 3 жыл бұрын
Good advise. I did make sure to check the polarity of the cable with my meter before I made the connections. I'm not trying to fry my new toy! Being that it comes from Icom, you can prob rest assured its correct but I always check none the less.
@alexdokic5567 3 жыл бұрын
I am in full agreement, it is very easy to make a mistake with polarity and then kick yourself for not checking first!!
@ae1tpa92gwtom2 3 жыл бұрын
Ya Know mike, good onya, was looking for a simple vid, to ensure got the right crimpers, I was looking about 18 months ago, bought 2 other pair b4 I found these online about 6 months ago, put them to work same day, work great!! All the best, cheers.
@hamradiotube 3 жыл бұрын
Right on, thanks for sharing. 73
@VE3FAL1Fred 3 жыл бұрын
Hey Mike I have the Powerpole version I bought many moons ago and if I recall it was indeed pricey back in the day but has crimped many power cables for our ARES group and club group. Heck even the connectors today are still pricey. Thanks for the video.....Fred
@hamradiotube 3 жыл бұрын
I was just looking at the official one. Almost $300!! Yikes! I'm sure its the last one (or 2) you'll ever need to buy though.
@kd4baoc612 2 жыл бұрын
Hey Mike, nice video on the Anderson Power Pole ratcheting crimper. I purchased two types of ratcheting crimpers plus the special dies that are offered with them. The first ratcheting crimper that I purchased was from DX engineering. It was made by Iwiss with the red and black padded grips for $49 plus 2 special dies that were $20 a piece. The second ratcheting crimper was made by TRI crimp with all the special dies that only work on that model for $60. My second crimper is very similar to the one you reviewed in the video. Personally, I like both that I purchased, but the tri crimp has longer handles making it easier to crimp 10 gauge wire in the 45 amp metal clips. The one offered by DX engineering is a good quality one, but the shorter handles require a little more effort to crimp 10 gauge wire in the 45 amp clips.
@hamradiotube 2 жыл бұрын
Thanks for the input and thanks for watching.
@TimRedman 3 жыл бұрын
I got lucky with the Amazon crimper I ended up buying. It's served me well so far. I noticed not long ago that there's an insertion/extraction tool to assist in inserting smaller wires into the connector (DX Engineering, Digi-Key and others have it), but a jeweler's flathead screwdriver works fine for me.
@hamradiotube 3 жыл бұрын
Yeah I've looked at those extraction tools and just can't justify it when my screwdriver works just fine. I'll prob get one eventually but its not a big deal.
@CC-hk6vy 5 ай бұрын
I BOUGHT THE IWISS too based on this, thanks!
@ReedAB8AS 3 жыл бұрын
I need to do some shopping. Thanks for the idea! 73 Mike
@hamradiotube 3 жыл бұрын
You should!
@srira7910 Жыл бұрын
Hey, great video production!
@mikek8mgb 3 жыл бұрын
I have that exact same crimper and it works great.
@hamradiotube 3 жыл бұрын
Good to know!
@dankd2fmw489 3 жыл бұрын
Awesome set. I have a similar set I purchased from Amateur Radio Supply. Never thought to recrimp 30amp in the 15amp for smaller wire. I usually remember it as red was left under the umbrella for the standard orientation 🤣.
@TianarTruegard 3 жыл бұрын
I ended up putting a small amount of solder on my too small wires before crimping. I never even though of using the smaller 15amp crimp die! *face palm*
@hamradiotube 3 жыл бұрын
Thats just one more example of needing to #hamharder Dan. If it doesn't crimp in one, try the next. Brute force all the things!
@hamradiotube 3 жыл бұрын
Soldering isn't a bad idea, but you should always always always crimp before soldering.
@usernamemykel 2 жыл бұрын
I enjoy your personality.
@endo2th 2 жыл бұрын
I have this and have used a little and it seems to be great!! I opened my latest MFJ power distribution "thing" and I thought where are the binding posts? I was really disappointed until I figured it all out!! Love Anderson Powerpoles!!
@anthonymarino4260 2 жыл бұрын
Well done.
@cappaculla 3 жыл бұрын
Well done, I have the same crimpers..... Couple good tips in here
@hamradiotube 3 жыл бұрын
Thanks 👍
@Brewdog2001 3 жыл бұрын
I was thinking about buying this tool, but when I looked at how it crimped, I had an old cutter/stripper/crimper like you can buy at most home stores for like $10 - 20 and just used it. To be honest, I had to crimp it twice along the connector, but it worked just as good as other connections I did when I borrowed a set of power pole crimpers. If I made more of these connectors up I would probably buy a set, but for just doing one radio, I didn't really see the need.
@hamradiotube 3 жыл бұрын
I was bit by the Powerpole bug early in my ham career. Now they are taking over my life and I put them on everything 12v DC. Having 2 crimpers is so convenient for me.
@patriot4849 3 жыл бұрын
I've had those crimpers for a while , work great
@hamradiotube 3 жыл бұрын
Good to know!
@nvrumi Жыл бұрын
Given the wire size and current draw, you need only the 15A PP, but you know that. (Captain obvious here...) For this type of connection, I usually insert a roll pin after aligning the two connectors to keep them locked together. I had a cringe moment (although I have every confidence that you already checked) when you plugged an untested connection into your radio. I would have done a voltage check to confirm correct polarity first. ;) But then I'm an engineer and anally retentive that way. Thanks for the heads up on the tool. 73 de AG7TX
@ryankc9oza118 3 жыл бұрын
I have one similar and it's worked well the last few years
@hamradiotube 3 жыл бұрын
Right on. Good to know you are a student of the Powerpole haha!
@ryankc9oza118 3 жыл бұрын
@@hamradiotube I used to not be. But once you start, just seemed to keep going
@hamradiotube 3 жыл бұрын
@@ryankc9oza118 Much like everything else in ham radio
@k2rcb 3 жыл бұрын
The IWISS seems to be popular! Guess we're all cheap SOBs. I bought one a couple years ago and it's been great. I've noticed that depending on the wire gauge you can crimp it again on the next smaller slot to get a really good crimp. Like if you're doing a 45, crimp it in the 45 slot first then put it in the 30 slot and squeeze again. Gets that bad boy really tight and it won't pull off.
@hamradiotube 3 жыл бұрын
Its pretty awesome. I just bought one for a friend who is new to the Power Pole addiction. They work great and aren't super expensive like a lot of others out there.
@peter-vk4qrp58 3 жыл бұрын
You could still wrap the longer side through a toroid to take up the slack and double for interference reduction.
@hamradiotube 3 жыл бұрын
Well where the heck were you before I cut the wire?!?! That is a very valid point.
@jamesalles139 3 жыл бұрын
@@hamradiotube split core makes it possible. Where is a Radio Shack, when you need it?
@rileydj8764 2 жыл бұрын
great video, I have the same tool and love it. where did you get those rubber boots?
@anthonymarino4260 3 ай бұрын
have the same one works great
@PY4SR 3 жыл бұрын
What a coincidence. I bought one. Arrived yesterday. But I didn’t have time to check and test it yet.
@hamradiotube 3 жыл бұрын
Well there you go. Lots of people have been commenting that they have this tool and they like it as well so thats reassuring.
@joen8joe231 3 жыл бұрын
I use that same one. I give it a thumbs up as well
@hamradiotube 3 жыл бұрын
Good to know from another source. Thanks for watching.
@mistermurtad2831 3 жыл бұрын
@@hamradiotube I do to, but if you try to crimp the 45amp connectors, you have to squeeze the wings in a little to get it started cleanly. 30 and 15 amp work great.
@TheNoCodeTech 3 жыл бұрын
Power Power the world & BNC all the the things! Great review man. Thanks.
@hamradiotube 3 жыл бұрын
Damn right!!
@markviers998 3 жыл бұрын
Learned something new, I've never noticed the A on the end of the connector but then my reading glasses aren't as strong as they used to be.
@hamradiotube 3 жыл бұрын
Hey cool, glad you found the video useful.
@StuartM0TTQAmateurRadio 3 жыл бұрын
Another happy user of those crimpers, used them dozens of times over the last couple of years and very happy with them. Spend the money you save buying a good cheap crimper on genuine Powerpoles, because ALL the imitation Powerpoles suck so totally.
@hamradiotube 3 жыл бұрын
Good to hear. Yeah the fake power poles are really pretty crappy for sure. I've got a few lying around and feel a little dirty because of it lol!
@DonDegidio 3 жыл бұрын
Hi Mike, I have the same crimping tool and bought it for the same reason to not have to change out the dies. If you run into the same situation about having a small diameter wire, what I do is strip off about a half inch, twist the bare strands, then fold the bare end in half and insert into the connector. Stay safe. 73 WJ3U
@hamradiotube 3 жыл бұрын
Well if its Don approved thats good enough for me. I do that too with smaller wire. Just not on this video. I figured if I do that some old man is gonna scold me for it, and if didn't people would tell me what you just did lol!
@KM4ACK 3 жыл бұрын
I think I have that very crimper. 👍
@hamradiotube 3 жыл бұрын
Nice 👍
@DominicMazoch Жыл бұрын
Now I, Y, K, and A need to go to BLADE fuses. Round ones sometimes hard to find, and can be fragile.
@gregjfair Жыл бұрын
I have that same crimper but I don't have that stripper... I NEED IT!
@k8drtqrp 3 жыл бұрын
I K8DRT it! Pretty close to the same method only I end up breaking something or stabbing myself in the finger with the screw driver.
@hamradiotube 3 жыл бұрын
Haha, sounds like you just need more practice. I've screwed up my share too.
@eddy2561 3 жыл бұрын
I'm a big fan of soldering the wires to the barrels, but I may look at these crimpers. Also I own the IWISS Dupont pin crimper and it works FB - Tnx Mike, k6sdw
@hamradiotube 3 жыл бұрын
Team crimp all the way. I do solder some things but a good crimp is stronger than soldering.
@thomasstandley6309 3 жыл бұрын
Have had that one for a while and it is a game changer compared to using a crappy crimper or improvising with other tools. The thing works almost always on the first try which means you'll end saving money by not wasting metal connectors. Equally helpful is a good hydraulic connector if you are putting connectors on battery or solar cables. Fairly cheap on Amazon or at Harbor Freight. Hey, weren't you supposed to out POTAing with the 705? NK5J.
@hamradiotube 3 жыл бұрын
Gotta have the right tool for the job for sure. I don't want to talk about my pota outing. I went out last Sunday and the bands were so bad I only got 2 contacts. Might try again tomorrow. I'll check the bands before I go out this time though.
@thomasstandley6309 3 жыл бұрын
@@hamradiotube Must be the Huntsville Faraday Cage Effect.
@hamradiotube 3 жыл бұрын
@@thomasstandley6309 Could be. The bands aren't that great right now. Made a cw contact to WE4DX POTA on the outer banks just now so I got that going for me. We'll see how I do tomorrow portable.
@W7EDM 3 жыл бұрын
I own these and have zero issues with Power Poles
@hamradiotube 3 жыл бұрын
Nice
@stickyfox 2 жыл бұрын
For a reliable connection, 100% of the strands must pass through the entry and exit bellmouths of the crimp, forming a "brush" on the exit side. At around 6:15 you can see that the terminal has tabs to stop the end of the wire. Push it all the way to the tabs! Don't be afraid to have strands protruding; that's how it's designed to work, so you can verify the quality of the crimp. -IPC/WHMA-620 "crimpety crimpety now now crimpety crimpety ask me how"
@hamradiotube 2 жыл бұрын
I only like my stuff to be mostly reliable.
@stickyfox 2 жыл бұрын
@@hamradiotube mostly reliable is 100% reliable if there's spare terminals on hand!
@noexcuses6727 2 жыл бұрын
I have these crimpers but for other uses. They work but they DO NOT fit the large 50 amp power pole units so an old school crimper is used for that.
@TianarTruegard 3 жыл бұрын
Where did you get the wire stripper like that? I haven't been able to find a nice automatic adjusting wire stripper. I've got a good power pole crimper similar to the IWISS (I actually considered getting the IWISS off Amazon). Also been looking at starting to make my own lengths of coax, but I don't have coax crimpers. Would love a video or info on those.
@hamradiotube 3 жыл бұрын
It's not a very good stripper but I got it at harbor freight for like 10-12 bucks. I should do a video on crimping coax. Next time I make one if I remember I'll film it. Thanks for the idea.
@davidmeale9572 Жыл бұрын
After making or modding supply cables , it's important to check polarity at the plug before you stick it in your expensive radio. Mistakes happen , ask me how I know !
@ZL1BQDRoly 3 жыл бұрын
Do you solder as well Mike?
@hamradiotube 3 жыл бұрын
Not typically, no. I knew I would hear about it from all you OM’s though lol!!
@ZL1BQDRoly 3 жыл бұрын
@@hamradiotube No accusations Mike 😊 Just interested. The 705 is not going to draw significant current anyway. Under a high current application it is always a good idea though. ,,, cheers mate.
@rbritt76 8 ай бұрын
bought them worked great on 15 and 30 but 45 tended to bend part of connecter the wrong way
@nativetexan9776 5 ай бұрын
I looked at prices of those damn crimpers. I couldn't afford them even if I were to switch to powerpoles. Unbelievable!!
@BlackHamRadioUniversity Жыл бұрын
How do you make 2 Pin DC Power Connector Plug (the one that comes with mobile/base radios)?
@ChaplainDaveSparks 4 ай бұрын
Just curious ... do you need that exact iWiss model for Power Poles, or do the make dies that will fit other iWiss crimpers?
@temporarilyoffline 3 жыл бұрын
I'm pretty sure this is the one that I have.
@hamradiotube 3 жыл бұрын
Great minds think alike.
@Joe_HamRadioGuy 3 жыл бұрын
I've had those crimpers they work good but I miss placed them 😔
@hamradiotube 3 жыл бұрын
Time to buy another one lol
@ac0m-glennthompson432 Жыл бұрын
What is the brand of the wire stripper you have?
@KE8ODY-WV-Ares-Ham-Dad-3O4 3 ай бұрын
Can it be used for anything but Anderson stuff
@stevec9889 5 ай бұрын
Can Powerpoles be used in automotive applications, say, under the hood?
@ericlefebvre1979 3 жыл бұрын
Do you have an amazon recommendation for power poles?
@hamradiotube 3 жыл бұрын
Not one specifically but I usually use the 30 amp connectors and make sure they are actual Anderson Brand, which can be hard to do as there's a lot of fakes out there. Try this link for 10 amzn.to/3deVTwP or this link for 20. amzn.to/328BtiK I honestly don't buy many power poles from amazon. I'll usually order from DX Engineering, though I hate to pay their stupid $13 delivery fee.
@jamesalles139 3 жыл бұрын
strip the wire twice as long, then fold the bare conductor over itself - double up. "I didn't break it!" - bruh
@hamradiotube 3 жыл бұрын
Yeah I've done that too. Any way to get the crimp.
@JimmyShot 3 жыл бұрын
Hey mike did you see that HamLog took their app out of the Apple App Store? Recommended it to a buddy and it’s gone now.
@hamradiotube 3 жыл бұрын
Yeah unfortunately it was taken down a couple months ago. I emailed the developer and he never responded. Too bad. But the new app thats out is HAMRS, and it's pretty sweet. It's also available on just about every platform too. I did a video on it a couple weeks ago. kzfaq.info/get/bejne/jNVkfNqdtqnPk3k.html
@mrgorman365 3 жыл бұрын
@@hamradiotube HAMRS is now in the Apple App store.
@daveN2MXX 3 жыл бұрын
This is a serious question- can someone please explain to my why every youtuber uses a tool which was designed for open barrel terminals and connectors on closed barrel anderson powerpoles? Why would you want to put a "box crimp" on a round wire? Wouldn't a rounded non-insulated crimp tool be better? Also, look at the manufacturer website/Amazon site...doesn't it show open barrel connectors for this tool? I see that you tagged the manufacturer on this video....maybe they can respond?
@hamradiotube 3 жыл бұрын
Because that's what Anderson Power Products recommends. Heres a link to the official Anderson crimping tool. Its not a box crimp. When the connector gets crimped it is rounded back down by the crimp tool. www.alliedelec.com/product/anderson-power-products/1309g2/70162295/?adpos=&scid=scplp70162295&sc_intid=70162295&gclid=Cj0KCQjwmcWDBhCOARIsALgJ2Qe-uWd3iVfB7Cwm_E_eYZU_jmNCnYdC9YhriHKPO-AcU8hwKs9bHfYaAqhFEALw_wcB&gclsrc=aw.ds
@daveN2MXX 3 жыл бұрын
@@hamradiotube ok, but look at the connector which they are using in box number one of this page: powerwerx.com/tricrimp-powerpole-connector-crimping-tool. It is an OPEN barrel connector with this tool.
@paulhastings3109 3 жыл бұрын
What do you use for cramping coax
@hamradiotube 3 жыл бұрын
The same type of tool, but with dies for coax. They are interchangeable.
@paulhastings3109 3 жыл бұрын
Have a link
@Johnyrocket70 3 жыл бұрын
Most wire strippers have crimpers that work fine.
@hamradiotube 3 жыл бұрын
Not good enough for me.
@toddbu-WK7L 3 жыл бұрын
For Powerpoles, I don’t cheap out. I don’t need a problem in the field. I buy everything from Powerwerx. More money but never had an issue
@hamradiotube 3 жыл бұрын
Powerwerx def has some quality stuff. I have several things from them.
@rocketman221projects 3 жыл бұрын
Powerwerx is actually cheaper than the normal electronics suppliers for powerpole connectors.
@forgetyourlife 3 жыл бұрын
No custom picture at boot yet?
@hamradiotube 3 жыл бұрын
No, I still have so many things to learn with that radio.
@shane.callaghan 3 жыл бұрын
I agree it works well love mine! 73s AH2EJ
@hamradiotube 3 жыл бұрын
Nice
@Wanarunna Жыл бұрын
these crimping tools appear to be designed open barrel crimps, not closed barrel crimps - no wonder people are getting bad results.
@hobbified 3 жыл бұрын
It's called a boot.
@hamradiotube 3 жыл бұрын
What aboot it?
@CarlosDXsman 3 ай бұрын
THANKS 73 FROM WW7CR 🎯
Nikita Zdradovskiy
Рет қаралды 7 МЛН
Proficient Prepper
Рет қаралды 7 М.
dial2fast
Рет қаралды 2,4 М.
Nir Gaming
Рет қаралды 7 МЛН
Тима Бичевский
Рет қаралды 1,6 МЛН
notebook-31
Рет қаралды 110 М.