2001-2006 Silverado Avalanche Sierra Yukon Escalade Denali Tahoe Suburban starter replacement

  Рет қаралды 38,184

Jabo The Mechanic

Jabo The Mechanic

2 жыл бұрын

thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my KZfaq channel on your social media. Links will be on the bottom.
#avalanche #mechanic #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive

Пікірлер: 41
@daxinventor3542
@daxinventor3542 6 ай бұрын
Thanks for getting the camera in the right angle so that we could see exactly where the starter is located and how to change the old one out. Outstanding job.
@johnguy1770
@johnguy1770 Жыл бұрын
Hey sir you did an excellent job explaining and showing how to do that starter replacement thumbs up
@thubb6
@thubb6 2 ай бұрын
Outstanding tutorial. Watched this a few times and swapped mine out in my ‘03 Suburban Z71. Didn’t need to lift or remove the tire. Thanks!
@DamionJR4923
@DamionJR4923 2 жыл бұрын
Thanks for the in depth video
@jimbradley727
@jimbradley727 Жыл бұрын
I do like your video you complete tasks much smoother than the other ones that I watched and gave me more confidence. One thing I ran into was dipstick tube interference...I could not get it out or in with the dipstick tube so I removed it and then reinstalled it. I also took my oil sensor plug off and the other connection which I believe is a hot lead.. I was tired when I did the job and could not find that hot lead connection on the motor until I had to pull my starter back down again and watch a video that showed exactly where it was. That was kind of sad because once I saw it on the video it was in plain sight 😆
@steveotheweirdo9884
@steveotheweirdo9884 Жыл бұрын
Things to you and the good angles that you recorded I was able to finish my job replicating your work I appreciate you
@MakersGottaEat
@MakersGottaEat Жыл бұрын
Excellent! I'm too dang big to get under our 2004 vehicle. And my hands are too big to get to the wiring. My wife watched you video 6 or more times today and was able to get the starter off herself. Thank you so much for sharing.
@davepee9437
@davepee9437 7 ай бұрын
Can you end your wife to my house I need mine changed as well! Thanks in advance homie!
@chesmatheny2903
@chesmatheny2903 2 жыл бұрын
Thanks man very good straight on video.
@gregoriomartinez6670
@gregoriomartinez6670 2 ай бұрын
THANKS BRO FOR SHOWS UP THE GOOD IDEAS AND THANKS FOR YOUR VIDEOS IT HELPS TO ME TO FIXED UP MY ESCALADE CADILLAC 2002.,GOD BLESS YOU.
@jonsan615
@jonsan615 Жыл бұрын
I’ve been looking all over for a video like this thanks for the info.
@ErnieLegendDJ
@ErnieLegendDJ 3 ай бұрын
Great detail.👏
@mud_just_mud
@mud_just_mud Жыл бұрын
I'm a mechanic and I love this guy he is great and his tutorial give helpful information and provides safety precautions one should take when working on vehicles I definitely describe #mechaniclife
@jdavis954
@jdavis954 Жыл бұрын
Seems like you did it the best out of everyone I seen on u tube thanks for the help !
@brandyunknown9196
@brandyunknown9196 Жыл бұрын
Thank you! Helped a lot with my 05 Avalanche. Especially getting it back in.
@Judsxn
@Judsxn 2 ай бұрын
Good video
@tomference4618
@tomference4618 Жыл бұрын
..best video I have watched for clarity of tight spots and explanation. Just curious why you chose to disconnect negative cable as opposed to positive.
@pascalzapata3942
@pascalzapata3942 7 ай бұрын
Thank you 🙏
@mikebentley8648
@mikebentley8648 Жыл бұрын
Great video!! Very helpful. Thank you
@MEMPHIS10REPPA
@MEMPHIS10REPPA 2 жыл бұрын
Excellent....gooood video very helpful... thanks.....one more thing....sell me that monte Carlo lol....
@TheTexxxan
@TheTexxxan 9 ай бұрын
Awesome! Thank you.
@danielrosas6408
@danielrosas6408 Жыл бұрын
Grasias amigo por compartir sus conocimientos mis respetos le agradesco de todo corazón
@conormason8989
@conormason8989 6 ай бұрын
Thank you so much. I very much appreciate it.
@dustinmiller1549
@dustinmiller1549 9 ай бұрын
Great info good job keep it up
@danieldiaz9147
@danieldiaz9147 9 ай бұрын
Great video very helpful on point
@New-Breed-Drywall-And-Paint
@New-Breed-Drywall-And-Paint Жыл бұрын
2002 CHEVY SUBURBAN …Just in case anyone was having this problem . No crank no start …… fuel and battery gauges flip up still like it’s going to start and then dead silence . Replaced starter and back on the rd . Also when it went out couple issues I had was I tried jumping it one more time with a flat head and it blew the 40 amp fuse which caused the gas and battery gauge to stop flipping up when key was turned to on position . Lastly the replacement starter I purchased was longer than the original . So if you ran into that problem just know it will ….. I repeat will fit so don’t worry . Hope I helped someone as I searched every video looking for someone with the same issue on their suburban or if the larger one would fit and could t find not one video .
@mrlepto
@mrlepto 8 ай бұрын
Good video! I'm doing this on an Escalade and I've run into this issue where there is a another Bolt from a motor mount or something that doesn't seem to be on the Avalanche and the starter is getting hooked up on the head of that bolt and I can't get it passed it to drop out
@jameslee1278
@jameslee1278 Жыл бұрын
Could the heat shield be placed on starter before reinstalling it on vehicle without any complications?
@ArmenArmenjs
@ArmenArmenjs 2 жыл бұрын
Do you need to shim the starter at all?
@ArmenArmenjs
@ArmenArmenjs 2 жыл бұрын
Good job. good time to replace crankshaft sensor!
@Boudell
@Boudell 2 жыл бұрын
Good video!!! Thanks
@jacoblariviere6453
@jacoblariviere6453 Жыл бұрын
Would it be possible to take the starter off without taking the heat shield off and then put the new one on after clipping the heat shield onto it?
@drbokin6647
@drbokin6647 Жыл бұрын
Yes the heat shield just goes on the part where the wires connect
@jimbradley727
@jimbradley727 Жыл бұрын
So his question is can you do the job without ever removing the heat shield and installing the new starter with it on... I would not recommend it. There would be a lot of interference and it's just simple much simpler to remove it and then reinstall it after the new starters in.
@abbyhammack6953
@abbyhammack6953 Жыл бұрын
I'll have to jack mine up I'm a big man
@codycopithorne6294
@codycopithorne6294 Жыл бұрын
I use ramps to drive on for any work under there.
@spellbreaker6609
@spellbreaker6609 2 жыл бұрын
Looks like it need seals
@PhiWeezy94
@PhiWeezy94 2 жыл бұрын
You need a jack stand too
@damnnant2462
@damnnant2462 9 ай бұрын
P😢😢
@702Tavoo
@702Tavoo Ай бұрын
Great video but the 3in wrench is pretty huge 🥲
Top 5 Problems Chevy Avalanche Truck 1st Generation 2002-06
8:10
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 402 М.
Secret Experiment Toothpaste Pt.4 😱 #shorts
00:35
Mr DegrEE
Рет қаралды 35 МЛН
Playing hide and seek with my dog 🐶
00:25
Zach King
Рет қаралды 35 МЛН
2003-2006 Cadillac Escalade/ Yukon/ Tahoe Starter Replacement
10:05
Valley Mobile Automotive
Рет қаралды 17 М.
Chevy Silverado Starter Replacement The Easy Way!
10:55
ERICSDIYGARAGE
Рет қаралды 68 М.
15 Min Heater Core How to Removal In A 99-06 Yukon, Tahoe, Silverado
14:53
How to change front shocks in 2001-2006 Chevy Suburban
6:06
Homemade Chow
Рет қаралды 56 М.
Alternator Change on Avalanche, Tahoe & Suburban 00-05..Easy!
7:15
How to replace AC Belt/Tensioner on 2005 Chevy Silverado
8:16
что за звук?
0:15
Мурат 07 манипулятор
Рет қаралды 3,2 МЛН
Дальше без меня!
0:25
SMASHCAR
Рет қаралды 582 М.
Снова заколхозил BMW? 😰
0:30
Тот самый Денчик
Рет қаралды 743 М.