Checkmate makes staccato original equipment mags as well as the mags for some others as well! You dont save much by going with them, but you do save! Great review as always!

Cool review. Keep up the good content.

Great review brother 🔥

Thanks for the review and the honest opinion on the highs and lows of the Jacob Grey TWC 9. In regards to the stovepipe, I believe to prevent that from occurring possibly use a ZeroTechOptic Thrive HD which is what comes in online bundle with the firearm (looks to be set back more form the ejection port). But I have no clue if the ZeroTech is as good as the Trijicon. Look forward to the comparision reviews you have mentioned and the performance during matches. Beautifully machined. I love the way the it looks.

Great review as always and about time you're getting some deals from some of these gun manufacturers😂

BTW thank for the video...+1 new subscriber

Nice review Guy! I have a couple of helpful hints here, hope you don't mind. First, I tried tp stop you from using the hex key to push the slide stop pin out, but then again there is just about as much chance of you hearing me as there is a chance for a non cleared gun firing a bullet thru the wires and truu my screen here. (Gotta love the Tube)! I was afraid it would scratch the finish on the gun and indeed it did remove the bluing from the end of the pin. GRRRRR!. My bank and most give pens away at the counter and they are perfect for pushing the stop pin out. No maring. I also really like the Atlas Gun Works 10 buck tool for removing the pin and the thumb safety. Low cost and very handy. (Besides, if you can afford such fine works of art, you an afford a 10 buck tool. Stop cheaping out)!!! 😁 But the number one hint is a link I will include here from a Vid Adam at Atlas did on getting the trigger pull you want. No work needed on the trigger, sear or hammer It is all in the Leaf spring and how to adjust it properly so that it stays where you set it. It will adjust both the trigger set and trigger pull separately. You an get either however you prefer. ;

good review, I have a TWC9 as well and really like shooting it. I had issues with my ambi safety and contacted JG They took care of it right away. I actually had them change it to a single side safety and like that much better. While I'm not a fan of the 2 piece guide rod it doesn't bother me and hasn't been a issue for the 1000 some rounds through it so far.

Nice pice my brother 🔥🔥🔥🔥

🔥🔥🔥🔥

🔥🔥🔥🔥🔥

Good morning Mr.Blackson hope all is well!! Not sure about the JG, I mean it looks pretty decent and that's definitely the nicest cardboard box for a pistol I've seen so far. I'm kinda a box guy. Really for that money it should already be with a tool-less guide rod. On another note I'm snagging up a SIG p365 AXG LEGION and I'm pretty excited! Will be our first all metal framed pistol, I don't even have it yet and I'm looking at Lok grips for the legion. I just want a legion coin to flip in the air to be honest. 😜 Have a good week!!

Great review bro but if you could buy only one e for it to be your EDC would it be the Jacob twc9 or OA defense 2311 compact pro or staccato c and would do you think about a Atlas Athena being a duty weapon

Atlas tool-less guide rod, and EGW .332 keyed reverse plug. It'd work great. Fixing the safety should be easy if you pop it out and tighten the tongue on the left side so it's tighter

Yes Sirrrrrrr 🔥 🔥🔥🔥🔥💪🏾💪🏾💪🏾💪🏾💪🏾.. Iron sharpens Iron @jacobgreyfirearms did an amazing job on this one. My only issues, were the same as you stated, brother. But overall an awesome dbl stack 1911. I'm going to review it on the podcast

I have a Dawson precision 4.25 tool less guide rod and talon grips on mine. Awesome pistol otherwise! Thx for this review

I had my hands on one of these a few weeks ago at Scheels in The Colony, Texas. I really like it. I did not end up getting it though, because I am left handed. Kind of a bummer.

Good video as usual. I got this gun when it first came out. I love the look of it. It shoots pretty well. The only big issue for me is how smooth the grip is. The construction is so solid though. The guide rod is also a pain. Not sure why the mfg. don’t use a tool less guide rod like you said.

Good video! 2 piece guiderod not too great, but sweet RMR HD

Received my mine last week. Pretty decent pistol. I believe my trigger is way more than the advertised 3.5lbs. Grip is not an issue for me. However, my right side thumb safety lossened after my fist range visit? Did you get that taken care of and how?

Just had the first issues with mine, I’ll shoot 1000 rounds plus on Saturdays and the gun started stovepiping constantly after about half that number. It was hot of course, never had an issue before with it.

Single piece guide rod should be on this weapon at that price.

Nice review. Picked one up a month ago. Was not happy with the pistol. Ammo sensitive. Sold it on Gunbroker

Checkmate makes the Prodigy mags I believe

I'm considering this firearm but the price is holding me back $2K all day but Staccato price I don't know.

I hate 2 piece guide rods, nothing EGW or Dawson Precision can’t fix, got a tooless guide rod from EGW for my Prodigy, works like a charm

I'd like to see more 2011s chambered in more calibers other than 9mm

The guy you mentioned in the beginning got his twc9 from me

Went to purchase this TWC9 yesterday when handling the firearm I realized the safety was poorly fitted the safety on one side was loose terrible for a $2,500 firearm shame on JG.

EGW also makes a two piece that wont make you lose an eye or shatter glass in your home! Why do I know this? 1+1= shattered kitchen bar pen light!😂

Can't wait for that versus bruh, but I must say I don't see the hype in this pistol first of all if any other pistol came with those grips it would have been a problem. Staccato's grips are better looking and functional also with a two piece guide rod... Please!!! Get a Staccato C series and call it a day! Because it's a JACOB GREY oooooooooo wow... Get the f#@k out of here!!! Good review bruh... Picking up my LPW Variant 7 Chiraq tomorrow bruh. 😎

My trigger breaks at 3.5 pounds... get a digital guage man

That guide rod would have to go .

Guys kill me with these reviews.. Why is it always static shooting on an indoor range? Get on the gas! How does this thing run when pushing the shot splits, hot, dirty, sweaty hands.. The safety wiggle is the male/female connection. Left side (male) seats in the right (female). This is easily fixed by tightening up the gap of the female side. You don’t have to push the guide rod up that far to start the threads. Just hold it in place with your thumb down by the barrel link. Slide the long section in and thread. Easy… Does the trigger have post and pre travel set screws? Are you not able to tell if the internals are MIM or not? Many claim they are MIM which is not co in my opinion..

2500 cost

Another guntuber who refuses to say the msrp at the top of the video. What class is it in? What do I compare it to? Without knowing the price I have no idea where this gun sits in the market. Now I have to click away from the video, and I probably wont come back.