SpeTool Introduction Bit Set spetools.com/products/spetool-wd-2-router-bits-set-8-pcs-1-4-shank?ref=JDDesigns Bit selections from Sainsmart amzn.to/3p0O8kn Bits from FoxAlien www.foxalien.com/collections/... Bits from Spe Tools amzn.to/3lNko8R Amana tools from Tooltoday shrsl.com/37eun

If only I'd have watched the video first!!! One laminated guide is now hanging in the workshop :)

Over the last year, I have watched this video several times. I keep on catching new things I missed the first time. Thank you for making this one.

Thanks for all these quality videos. Props to both you and Graham Bland. You are both deserving of a lot of praise!

Hands down the best channel for beginners. Thanks a lot James, keep up the great work.

I have enjoyed watching this informative vid. I have about 3 years of CNC Routing under my belt and learned something new. Well worth my time to watch. I am a subscriber and will be recommending this video.

I've been following this channel for a year or so and chatted with you a few times and always appreciated the info. I took time off from CNC to learn my 3d printers and now concentrating on learning the CNC. Lots more videos now than a year ago. Looks like a good time to start back up again. Cheers.

Nicely done James. A difficult topic to cover fully, but you did it well. And I entirely agree that feed rate and depth of cut are more important than adjusting the speed - most of the time at least (which, I suppose, is a bit like saying "except when it isn't!)

Awesome content. It's refreshing to get great information delivered precisely and clearly. Keep up the great work. Thumbs up all around.

Thank you James. I'm a beginner and this information is what I've been needing and missing. Plus, I now understand why there is no 'Use this speed and feed rates' video.

Thanks for this and the others you have done. Always pleasantly surprised by knowledgeable people sharing valuable knowledge.

Keep up the good work James, I’m learning so much from you. Thank you!

Thanks for taking your time to explain all the difference and applications for which the bits should be used for.

*Excellent overview of bits and even the concepts of F&S !!*

After all of my own research and I don't know how many videos I have watched, you have been my go to channel James. Always great information in the way I prefer to hear a presentation. I have finally taken the plunge and have ordered my machine which is coming in this week. I decided on the Proverxl 6050 after looking at so many machines. I'm excited to get started and what a great enhancement to my newly constructed workshop. Thanks again James for always providing quality content. Cheers from Utah ! Thumbs up for sure. ;-)

New 3020 machine and greatly appreciate the insight, presentation style, and common sense approach. Compared to my scroll saw projects, CNC projects lean into the setup and technical aspects for creativity more than the creativity of hands-on feeding/turning wood into the blade. Hopefully, at the end of the finished project, I will be equally (though differently) pleased. Thanks, again.

Lots of great info here, thanks! I would suggest the use of "obviously" should be avoided in anything called a beginner's guide, though. 10:35

Thank you for your videos! I think im coming back to these once my 3018 has arrived and built. Amazing content. Very easy to listen, comprehensive enough to get started and very clearly explained. Cheers!

Good job James, the feeds and speed comment about experimenting with your bit and your machine is the best advice.

Love your tutorials man. Helps me out a lot. Clear and detailed explanations! Keep it up!

Thank you James. You have no idea how valuable your videos to me 😊

I just started using my 3018 a month ago and this video was super helpful to understanding bits thanks

You're the man James! Keep it up. You'll be at 100k subscribers in no time.

First channel with usefull information. Great job James and thank you for what you're doing.

A bit late to the CNC party but I was about to give up until i found your helpful videos. Take the time, set it up right and its a brilliant bit of kit. Thanks for these vidoes. Best help and advice.

Very good explanations about a very complex subject. And it definitely does reinforce testing and experimentation. Thanks.

i just bought my genmitsu 4040 yesterday with basic typical accessories. very excited to work on my machine with your advices and information. thanks james

Bravo 👏 great video for beginners, plenty of information and easy to understand! Thank You

Great video at the perfect time. I’m experimenting with bits on carving out names, i.e. key chains. 1/16 corn cobs work pretty good. 80 degree, not so much.

Thanks James, that helped so much in understanding what bits I need to start off with. Excellent video as always!

Hey James , thank you so much ! great tutorial and foundation knowledge for me being a newbie … we have a laser incorporated into our studio workshop and just purchased a desktop cnc which we are looking fwd to … will binge watch your channel for more info … thanks a million 🙏 regards Steve (Adelaide Australia)

Thank you for the great video. You make so easy to understand all the technical details. I love your channel

Thanks so much for the videos you provide. You are truly a master of relaying information in a down to earth and concise method. Cheers mate.

Great Vid. Thanks a lot, very informative, just starting my CNC journey. Keep up the great work.

Thanks to Leo for leading me to your channel. I am now a subscriber. Great job.

Your videos are amazing. Certainly giving me the confidence I need to start my CNC journey. Thank you so much

Hi James, great videos! As a toolmaker may I point out an error in your terminology? What you are calling an End Mill is in fact a Slot Drill. The difference is important because true End Mills cannot do plunge cuts. They have usually 4 flutes, and the cutting edges on the bottom do not meet in the middle. Which means they don't cut the full area of the bottom surface - if you try to plunge with them you will have a crash. They are mainly used in metal cutting, moving sideways into material to make slots and rebates. The reason for using them is that they can cut faster with a better finish than a Slot Drill in situations where you don't need to plunge in the material. The cutter moves sideways out of the material, moves down in fresh air, and then moves in again. Or they are used for finishing side cuts inside a pocket, where the material has previously been removed to the required depth using a roughing Slot Drill. For the type of work you are doing you will probably not have much use for End Mills - if your viewers order them they are likely to get the wrong thing and have big trouble on their machines trying to make plunge cuts. What they need are called Slot Drills - usually having 2 flutes. cheers, Martin.

Brilliant video. Very informative and very professional. Thank you. 👍🏻👏🏻👏🏻👏🏻

Thanks for a great video with so much useful information!

Excellent tutorial, thank you.

This tutorial is great and thank you for spending the time to make. I do love DeskProto, as when you setup a tool it gives a starting point of feeds & speed , and once you get to a sweet spot then you can go an edit the tool with the correct settings for that tool and name it Like 3mm Flat End 2 flute Pine kiln dried and your have those tools and settings at hand in a nice organised list Best thing is, its a lot cheaper the Vcarve, and I own that to but find DeskProto better to work with.

Excellent video explained so well

This is great information. Thank you for the work.

Brilliant video James, as a complete novice (my PROVer machine is on its way to NZ !) I found this video very helpful, it answered many of my questions.

Great, helpful video. Thanks.

Man, I really appreciate this video. What a great primer. I also watch a gentleman who swears by the longmill. I myself have a fully-loaded/ATC/aluminum table stepcraft 2 d840 + their own official enclosure. Has taken me LONG (extraordinarily unusual amount of time!) to get it setup on this pandemic/with young kids to protect etc - I am not buying in, I am just saying - I really appreciate your channel very much, especially for this video. I would love to see more content like this. Thank you brother. In the meantime, I have very much enjoyed your diode laser videos & your genmitsu router videos - seems like the best-value starting machine on the market. Would you say that is true, or is it still up in the air? I started with this stepcraft & I do not regret it, though the price is a lot better on the genmitsu machine & it seems very well put together - the upgradability is very nice on it.

Great Job, Well explained

hi, all your video's are first class, very infomative, keep the great video's up.

Brilliant explanation! So much terrific information!

Thanks James, another excellent learning tool!

Great information. Thank you.

thank you. im a newbie here. can't wait to build the machine and build.

Excelent video, thanks again!

Feed and speed calculator? I’m a cabinetmaker by trade that specialises in cnc programming and operating with nearly 30 years of experience. To work out rotation speed you look at the tool specs. Spiral cutters are usually good for 24000 rpm tct and tok cutters are 18000 rpm max with less for larger diameters. To get your feed rate you start with a reasonable number and listen to the machine. A cutter that is rotating and cutting in the sweet spot will run quietly. Not much louder than the spindle itself. Using this method I have managed to make spiral cutters last for over 100 hours before needing to be sharpened.

Thank you, very informative and well explained.

Great video mate, very informative.

- Great presentation. - Thx.

-MASTER CLASS- Thanks James for doing this video, better is imposible. Greetings from Guatemala XD

Thanks James, again a great video

Awesome James.. here is an idea for a future video: Runout - what it is, how it affects your cuts and how to measure and improve it. I spent quite some time with the 3018 developing a quick way to measure it and ways to improve it. For ~ 0.1mm engravings it can make a difference in the final result!

Super helpful. I'm very thankful

Thank you James, very interesting.

Dont forget with the ER series collets; the nuts have an eliptical ring inside. You must insert the collet into the nut first, then slide the milling bit in. We had to replace so many collets at my work because people put the collet in the holder, and tighten the nut over it. This rips the collet up, and prevents it from unlocking properly.

Thanks. This was very informative.

Thank you. Awesome info!!!

Excellent! Thanks.

thank you so much, this is a lot of help

Thanks for the video.

Outstanding!!

fab video !

Perfect video

Generally, you want to choke up as high on the shaft as possible with the collet to reduce run-out. When you're cutting wood tho, I guess run-out tolerances must be pretty lenient so it probably won't matter that much.

Thank You!

30:10 GD JD, this is a GD GOOD video.

Hi James. Thanks for your videos on this 3018 unit. They are very informitive. Do you think the upgrade of spindle motor to 20,000rpm motor is a good upgrade to do?... Is it beneficial for cutting/engraving quality or is the 10,000 rpm good enough?

AS usual a verry good video , you are a good engineering instructor , and i like your instructions ; it reminds me empirical itterations ...thanks a lot

Hi James, great video, please do you have a cut plan for the enclosure for your CNC machines ?

Thanks well done

Very good explanation to try break the mystery of bits, Feed rates. Chip load & V-Carve. As you said it is a confusing loop, but importantly we don't need to get hung up on the detail, look & listen to what the CNC is doing, how to interpret difference between smooth running cuts & chattering, noisy cuts. I don't know all this will resolve my particular V-Carve problem of rough bands approx located 1-2 & 7-8 on a clock face.had it on 3018 & 4030, ! Anny ideas? I don't think it's feeds & speeds or dull bit as 90% perfect!

Hi James, I'm trying to add V bits to easel and I'm not sure how to input the specs properly. For a V bit that has a tip of 0.1mm, 20 degree angle and 1/8 shank, should I input 0.1mm or 3mm (1/8inch) as cutting diameter? I suppose that if the v-bit is fully plunged in to work piece, it will cut at a diameter of 1/8 inch (same as the shank size)? Thanks!!

Thanks

Awesome video! Though I did get an ad for mental health services while watching so maybe that is a bad omen lol

Bull - BOOL. Like Pool. Ball, Ball, like you said. AUSTRALIAN REVOLUTION! GOD BLESS FARMERS EVERYWHERE.

Hi James, Great video again. Thanks. I need to know something. I hope you can help. I want to make a branding iron from brass with my 3018. Is iti possible? if yes, which bits and speed/feed would you use ? Thanks in advance. My best

Great job James, when you talk about the chips produced, is it possible to see an example of good and not so good, (English oak being one of the woods I’m really struggling with. Sorry for newbie question. TIA.

Thanks for the quality video, what software do you use?

Hey man what's a good starting point in terms of feeds and speeds for 3mm aluminum composite panel

Hi there james love your vids just started with 3D carving in easel but it seams to only allow 1/8 finishing bit is it posable to change this for 1/16 for finer detail?

Looking to do a juice groove for a cutting board. Need 1/8” shank. Any recommendations?

James, Can you provide video examples of good and bad feed rates? Us newbies have a hard time with that ‘feel’ you mention.

Hi James, Great Video. I have a few follow up questions. In the Speeds and feeds section you reference the size of the chips created by the bit during the cut. Any examples you can point to to related to too small chips vs to big or the machine noises? I've been running slower speeds than you've referenced in a couple videos and maybe I'm being too conservative. You mentioned a feed rate 400-500 a few times, and I'm closer to maxing out at 325-350 for softwood (Pine) @ .5 mm Depth of cut. Also, do you normally suggest a faster feed rate with a shallower depth of cut? Thanks!

Just wanted to say thanks for these vids, I'm a complete beginner. Helped massively. Is a Roland/Techsoft TS-30 a good machine? or would the £800 have been better spent on something else?

I want to get a new bigger cnc but I want to add a at least 10W output laser I have a 3018pro and have replaced boards and spindles would like a good one to run both appreciate any advice thanks

I am learning cnc and English as well ^=^

What about diamond drag bits? What bit do you select in easel to se them?

Thank you James for your Video. Can you please advice what are the best bits (such as no. of flutes, up, down or straight cut) for carving an EVA foam 6-9 mm. thickness? Because it is very delicate material and tricky to carve. Thanks.

Newbie question: What material did you use for those cream-coloured pieces, please? Some sort of laminated ply?

Can these bits be used for aluminum also? 6063? I am more into aluminum milling bits

As usual your vid's are very good. We need some help in a different direction... Where can we buy a single replacement blue-coated corncob bit? SS does not sell single corncob bits nor ten-packs of a single corncob size bit - only a ten-kit of different sizes. I need two bits to refill my kit gaps - but HOW? 🙃

Hi are there any upgrade linear rails available for the 3018