Jamie Patterson Rapid Blue review
Рет қаралды 8,900
Жыл бұрынJamie Paterson recently tried out our Rapid Blu Liquid PTFE & sent us this review!
Rapid Blu is WRAS Approved & brilliant value - 50ml Bottle Just £5.60 + Vat
Order yours here & join the Rapid Blu revolution...
www.macdonaldplumbingsupplies...
Free Delivery on orders over £50 + Vat
@johnmoore2798 27 күн бұрын
First video I came to view on liquid PTFE and it’s done by a fellow bootneck. Good effort royal. Great video 👌🏻
@macdonaldplumbingheatingsupply 20 күн бұрын
Big Jamie is a top man John 🙂
@mickbmx 6 ай бұрын
Those bleed nuts always leak too, be a good idea to put some on them too.
@williamlawrenson8345 3 ай бұрын
Minor point, video back to front, guessing you used the selfie lens but thanks very much for the tip. Doing a radiator at the moment so will try it out.😊
@macdonaldplumbingheatingsupply 3 ай бұрын
Brilliant... Please let us know how you get on with it!
@williamlawrenson8345 3 ай бұрын
Had to use tape in the end. Urgent need and that was all they had. Job done but thanks for the tip, will look out for the liquid.
@macdonaldplumbingheatingsupply 3 ай бұрын
@@williamlawrenson8345 thats a shame - Next time you are doing some work give us a shout ahead of time & we will get you sorted out 😍
@pierrelabbe3173 6 ай бұрын
Wow Québec ❤😮
@drcl7429 22 күн бұрын
How hard to break the seal if needed to change tail for a longer one etc?
@macdonaldplumbingheatingsupply 20 күн бұрын
Once cured you will need to gently apply heat to re-open the threads 🙂 It can be done!
@andrewpearsall3587 6 ай бұрын
hi what pliers are you using?
@tristaofranca7298 6 ай бұрын
knipex
@Daniel_Adam 18 күн бұрын
Does it dry up in the bottle if not used for some time? Fernox LS-X always does
@macdonaldplumbingheatingsupply 18 күн бұрын
The bottles have a click closing point to the lid. If you keep it closed it wont dry up 🙂
@Rajan-jw8up 10 ай бұрын
Leak city
@macdonaldplumbingheatingsupply 10 ай бұрын
We have so many installers using it now without any issues. If the thread is dry, clean and new it won't leak!
@hamaadrana6191 9 ай бұрын
Don’t know what ur talking about 🤐
@macdonaldplumbingheatingsupply 9 ай бұрын
@@hamaadrana6191 Thanks its a cracking product!
@MikeKeel 5 ай бұрын
Are these threads easy to remove down the line...?
@deadbydawno 2 ай бұрын
@MikeKeel no...they need to heated to be removed,like super glue on steroids,even after 10 minutes.
@giliguluedinburgh 3 ай бұрын
How long does it take to dry? And to pass water through?
@macdonaldplumbingheatingsupply 3 ай бұрын
Hi...Leave around ten mins to set & you can put water through the join. After 24hrs it will hold up to 700Bar 😯. Very important the threads are new & clean. Old, pre used threads are less suitable as you can never get them properly clean. If you need any help get in touch 😊
@deadbydawno 2 ай бұрын
I've used it on leaking trv head,sealed in seconds ,so it's good to leave for 10mins but it does work instantly.
@macdonaldplumbingheatingsupply 2 ай бұрын
@@deadbydawno Its brilliant stuff... We recommend only use on clean, new threads but if it works for you then brilliant! 😍
Rising Tide Plumbing
Рет қаралды 152 М.
Drain My Lawn
Рет қаралды 53 М.
Oxyplumb Heating & Air Conditioning
Рет қаралды 30 М.