Worlds Most Reliable BMW Engine?

Рет қаралды 434,563

Күн бұрын

In this video I finish building a BMW e46 M54 backup engine for @ChrisFix
I tried really hard to squeeze as much information as I could without making the video 2 hours long. I hope you enjoy it!!
Check out Jamie's Store!: ourwearhouse.com/collections/...
------------------------------------------
**Giving this video a "Thumbs Up" really helps with the KZfaq algorithm, Thank you an advance! Don't forget to share it with your best friend too! ;)
------------------------------------------
Video Chapters
0:00 Intro
0:37 Upgrade oil pump
9:41 Timing chain and cover
11:23 Rear main seal
12:44 Oil pan
14:19 Water pump
15:14 Oil filter housing
16:43 Belt tensioner
17:28 Harmonic Balancer
18:53 Oil return check valve
19:37 Cylinder head gasket
20:34 Piston return springs
21:15 Cylinder head
22:55 Exhaust manifold studs
23:59 DISA valve upgrade
28:49 Intake manifold prep with injectors and CCV
31:21 Vanos Rebuild
34:30 Camshafts and lifters
35:54 Setting up timing
38:34 Installing vanos
39:32 Spark plugs
39:47 Valve cover
40:12 Thermostat
40:19 Intake cam sensor
40:29 Coolant pipes
40:48 Knock sensors
41:06 Vanos oil supply line
41:15 Upgraded pulleys
41:22 Intake manifold
41:29 dipstick tube with "racing" dipstick
41:48 Preparing to ship with custom built stand and box
42:46 Delivery and wrap up
Consider subscribing, Thank you!
------------------------------------------
Upgraded parts used in this video:
- Oil pump upgrade bit.ly/3ntLLEK
- "racing" oil pump chain bit.ly/3Abqzef
- "racing" timing chain bit.ly/3a91FkR
- Water pump bit.ly/3OyC4AY
- DISA Rebuild Kit bit.ly/3I0OK0Q
- Vanos Rebuild kit bit.ly/3Nxu7L9
- Vanos Rattle Rings bit.ly/3ntPq5s
- Aluminum water / power steering pump pulley kit bit.ly/3AiSadA
- Piston return springs bit.ly/3y1oQFT
- Beru spark plugs bit.ly/3AeVdDt
- Braided ss vanos supply line bit.ly/3NB0dWa
- Silicone radiator hoses bit.ly/3a0dmdR
- Racing Billet Aluminum Dipstick bit.ly/3QYNwar
- WPC treated rod bearings bit.ly/3y7z8UO
- WPC treated main bearings bit.ly/3OUlYS3
- Forged Pistons bit.ly/3OUm4Jp
------------------------------------------
Replacement parts in this video
- Oil pan gasket bit.ly/3bDzXgF
- Timing cover gaskets bit.ly/3y37yrO
- Timing chain tensioner bit.ly/3NvgADQ
- Oil level sensor bit.ly/3nrZZ9h
- Rear main seal bit.ly/3OPhDiJ
- front crank seal bit.ly/3Nym4xv
- Head bolt kit bit.ly/3ywvxAY
- Head bolt washers bit.ly/3u803Ph
- Head gasket bit.ly/3bzvN9w
- Head gasket +.3mm bit.ly/3I3Y1pd
- Harmonic balancer bit.ly/3OE3Tbe
- Lifters bit.ly/3OvFDaY
- Injectors https bit.ly/3R5iTQI
- Intake manifold gaskets bit.ly/3I0pWGs
- Crankcase vent valve kit bit.ly/3a3urU4
------------------------------------------
Supplies and tools used in this video
- Detailing brush amzn.to/3I2ARiM
- Engine assembly lube: amzn.to/3uc51KR
- Degreaser (not the same as I use but will work the same) amzn.to/3NwPzQ8
- M54 timing tool kit bit.ly/3QYzdCN
------------------------------------------
**Consider Subscribing to / jamiesgarage1
--I really appreciate it!
---As an Amazon Associate, I earn from qualifying purchases.
------------------------------------------
Jamie is the Owner of Elite Motor Works in Sarasota Florida, Check out his social media in the links below:
-- TikTok: / jamiesgarage
-- Jamie’s Garage Instagram: / jamiesgarageofficial
Check out Jamie’s Shop Elite Motor Works
-- Elite Motor Works Website: www.elitemotorworks.net
-- Elite Motor Works Instagram: / elitemotorworksfl
-- Elite Motor Works Facebook: / benzandbmwrepair
-- Elite Motor Works KZfaq Channel: / benzandbmwrepair

Пікірлер: 950

@chrisfix 2 жыл бұрын

This video was an awesome wrap up to a really cool collab! So with those spec piston return spins, hypothetically speaking, how much boost can this engine take?

@JamiesGarage1 2 жыл бұрын

Approximately 42 Nibbles of pressure at 350 furmans above sea level.

@danieltv1943 2 жыл бұрын

The spring has returned :"")

@mustafaz5893 2 жыл бұрын

We wait long time for this video. Thanks

@mohammedsafar3155 2 жыл бұрын

Oh god does this mean…..

@tinpony9424 2 жыл бұрын

Until Jamie's technical explanation of piston return springs, I thought ChrisFix was just giving a flex by using them.

@texannationalist5887 2 жыл бұрын

as someone who owns an e46, seeing this engine with no oil or grime on it makes it completely unrecognizable as an m54. i honestly didn't know they were bright silver like that

@aqib2000 2 жыл бұрын

Lol you’ve never seen a VW PD (diesel)

@josephz4573 Жыл бұрын

I thought they were black from factory

@YorkyPudinz Жыл бұрын

Bad service history.

@MDM1992 Жыл бұрын

The m54 is a truly great, reliable and beautiful engine, well worth spending the extra time and money to keep in good order. And they handle a turbo like it was meant to be and words can't express how fun they are with boost. Even if your not a BMW fan, these engines are well worth swapping into another shell, though I've always liked my e46's personally of all shapes and sizes (except the compact of course) currently own a boosted 325ci and a boosted 330i touring, wouldn't change that either, why buy new cars when you can buy new parts lol the touring has taken some serious abuse in the shell department though so will be needing a new one of those soon, but pre facelifts without a sun roof are getting hard to find these days, too many kids drifting them into walls and barriers every five minutes which saddens me.

@xankpc Жыл бұрын

@@MDM1992 ha yup took me about a year and a half to find a single decent pre facelift e46 for 3k that Didnt have a welded diff or missing fender….very happy to own this car at 20

@htownblue11 2 жыл бұрын

Piston return springs are absolutely a necessity for a client as special as Chris. They compliment the harmonic balancer I’ve read. Jamie you really are an elite level musician….i mean mechanic😀😂😅🤣

@JamiesGarage1 2 жыл бұрын

😂

@lucasniemeyer3381 Жыл бұрын

@@JamiesGarage1 2:59 There would be a better way of measuring in this case: You have to use the backside of the caiipers. there are two "steps" that show up if you open it... I cant describe it by word very good, otherwise you have to look it up

@eduardocapamadjian6031 10 ай бұрын

please link to get does springs

@juanignaciocaino 9 ай бұрын

@@lucasniemeyer3381 this would be the perfect application for a machinist's ruler, a dept gage like the starrett 237 or something like that. You don't rely on the veniers caliper crowfoot for a precise measurement.

@panzerveps 2 жыл бұрын

I did the piston return spring upgrade on my mk4 Jetta, and I can confirm that this is one of the best upgrades you can do to your engine. Since the engine use less energy to return the pistons, you will also see significantly reduced fuel consumption.

@JamiesGarage1 2 жыл бұрын

Just make sure you get the mark 4 piston return springs for your mk4 Jetta

@GhostMan2013 2 жыл бұрын

Actually, For this endurance race engine you should have used the 240 spring rate return springs it will increase the horsepower by 69%.

@JamiesGarage1 2 жыл бұрын

Yes but the downside is increased gauge deflection and everyone knows how much tension that causes on the belt diaphragm.

@shepshepson 2 жыл бұрын

Sorry to point it out, but you BETTER make sure you got your muffler bearings greased, and in tip-top shape in order to keep your exhaust sounding like a genuine race-car.

@DummyDumDum542 2 жыл бұрын

Yeah, and dont forget to get stiffer springs for those piston return springs as well!

@bagelbandit6076 2 жыл бұрын

@@shepshepson first off, this is not Jaime’s car. Second off, the owner of the cat has multiple videos on common problems like said muffler bearing and blinker fluid (especially in these BMWs). I’m sure ChrisFix has it all taken care of.

@shepshepson 2 жыл бұрын

@@bagelbandit6076 lol yes

@ShopLifeTV 2 жыл бұрын

Engine build and the video both came out amazing! Even if Chris doesn’t use the engine it will make for a great display piece with how clean and new everything looks!

@JamiesGarage1 2 жыл бұрын

Thanks dude! 🤘

@mikesavage8379 2 жыл бұрын

36:25 A is for Exhaust, E is for intake

@alli333o 2 жыл бұрын

Exactly. Auslass = exhaust Einlass = intake

@JamiesGarage1 2 жыл бұрын

Yep, I said it backwards.. I got it correct in the engine teardown video though. lol

@TopDedCenter 2 жыл бұрын

A = auspuff

@alli333o 2 жыл бұрын

@@TopDedCenter ähh... was? :D definitiv nicht.

@86_E30_Blondie 2 жыл бұрын

@@alli333o einlass und auspuff seite, nicht auslass

@abbashaider8668 2 жыл бұрын

Take a shot every time Jamie says ‘this is a common failing point’

@JamiesGarage1 2 жыл бұрын

🥃

@jesusfernandez5632 2 жыл бұрын

Good one :)

@Ratkill9000 2 жыл бұрын

And I wouldnt be surprised if it wasn't a common failure point.

@Ephoros Жыл бұрын

Sorry, i blacked out. Did i miss the piston spring instalation?

@mattstorr 2 жыл бұрын

I wish I had time, tools. location and knowledge to do work like this. Love the attention to detail and the breadth of knowledge in terms of where the attention to potential problem areas are. You make it look so straightforward (I know it isnt!). Video editing and positioning of shots is perfect for someone like me wanting to understand more.

@rhettkroninger7018 2 жыл бұрын

This is incredible. I loved watching this entire series.

@grahammcallister7743 2 жыл бұрын

I really loved this series, great explanation and visual for each step and it’s nice to get expert knowledge on what needs upgraded and replaced. Would love to see maybe more engine content like this 🥺

@tristanthompson8032 2 жыл бұрын

I started watching slightly before you did this for Chris but I'm liking seeing your channel grow, quality is compatible to Stephan's

@rossszabo3748 2 жыл бұрын

Jamie keep up the amazing content, then post notifications come handy to see your awesome content!

@sm0kzor 2 жыл бұрын

I love the way you explain things, clean and simple as it should be, i'm learning a lot from you. you're awesome Jamie

@lordjaashin 2 жыл бұрын

BMW cars - where customers have to upgrade components in the car engine to make it drive able

@jatoxo 2 жыл бұрын

Yea, finally undestood the importance of piston return springs

@dazeboy79 4 ай бұрын

Jamie is DA MAN!! Great rebuild sir!!

@reiannaidoo 2 жыл бұрын

Now that's how you rebuild an engine. Perfection on every detail. Just so satisfying to watch.

@ashtonm.3825 2 жыл бұрын

There are some people who are born with the gift of expression and communication. You my friend were definitely blessed with that. I can listen to your explanations for hours. You are such an amazing presenter. I hope you keep producing your amazing videos. Thank You!

@dasfahrer8187 2 жыл бұрын

20:35 ... You need to use spring compressor to install those properly, otherwise they can create too much angular wall pressure and blow the gasket nipple. BMW makes a tool for it, but it's $420.69.

@killuminati2112 2 жыл бұрын

Nice

@tomsbondars 2 жыл бұрын

Gasket nipple 😂😂😂

@joeishere500 2 жыл бұрын

im even shocked to see springs , i not even know they can put springs to sit on top of the pistons . im not even sure how it works like that but how would you even use a tool as the head has to be on

@L3xou97 2 жыл бұрын

@@joeishere500 that's a joke. Chrisfix used to make jokes every 1st april. Like changing blinker fluid and stuff.

@L3xou97 2 жыл бұрын

This might also blow the engine brake pads up and the PRNDL

@goodfth 2 жыл бұрын

Thanks Jamie, the level of detail in this assembly video is great! I’ve been slowly refurbishing my E53 3.0i 5 speed and this helps me prepare for some of my upcoming tasks.

@JamiesGarage1 2 жыл бұрын

Thank you for watching! I really appreciate it 👊

@Buc_Stops_Here Жыл бұрын

Thanks for sharing the involved process of resolving the "weaknesses" of the BMW engine to make it more reliable. All three videos show you every step you took to make this engine as reliable as you could.

@gfrom085 2 жыл бұрын

Your caliper can take four kinds of readings: outside, inside, depth, and step. Yes step measurement with the back end of the jaw and the dial/screen frame! I love your content man! I was so exited for part 3! Beautifully delivered!

@jeroen1914 2 жыл бұрын

27:50 ... never smear loctite or silicone or any substance on the female part, doing this will always scrape of most of the substance and it can block the port. If you smear it onto the male part the excess will scrape off outwards and it wont get into the hole or whatever part it is you are connecting.

@brenton9492 2 жыл бұрын

You explain yourself very well and with great detail. Makes it easy to follow, thanks for videos

@JamiesGarage1 2 жыл бұрын

Thanks for watching!

@pezzrod Жыл бұрын

Gotta say I watch a lot of car stuff on KZfaq, but this is by far the most satisfying and exactly how I would do things myself. Kudos!

@taz391 2 жыл бұрын

The most satisfying video on KZfaq to date. Can’t wait to get mine rebuilt. Much love from the UK 🇬🇧

@krunker7371 2 жыл бұрын

The goat back with another vid! 🐐

@chadriddle3517 2 жыл бұрын

Jamie! 430k subs ! Super fast growth! But it’s well deserved is why.’ Your channel is amazing..Absolutely love this m54 content . E46

@JamiesGarage1 2 жыл бұрын

Thanks dude. It’s been growing like crazy. I’m glad you like the content 👊

@FriesenAutomotive 2 жыл бұрын

I enjoy the in depth explanations. Keep doing them, KZfaq needs more of that.

@SupraSav 2 жыл бұрын

Channels like this deserve all the followers and likes in the world.. Hate those commercial/flashy/showy automotive channels that get everyone else to do all their work and steal all the limelight. Thanks for making an awesome, detailed video of this. I don't even own this platform.

@dobbygfred8452 2 жыл бұрын

An awesome rebuild! Those piston return springs would be best complimented with the Brock Energy Polariser that aligns molecules for top racing performance.

@rogerhinman5427 2 жыл бұрын

Came here because of ChrisFix. Staying here because this rocks.

@JamiesGarage1 2 жыл бұрын

Thanks dude!

@dazeboy79 4 ай бұрын

great job and thanks for sharing!! loved it!

@paulgarcia458 2 жыл бұрын

I like videos like this where they get straight to point n don't waste no time, good info!

@magictrickdev 2 жыл бұрын

20 minutes deep, spaced out, tired, and ya'll almost got me on the piston return springs. We both know 240 springs are much better for high performance applications.

@CrAzZyTheCodingBoss 2 жыл бұрын

This is built for reliability imo

@joeishere500 2 жыл бұрын

shit man ,,,, i not even now about using springs ..

@MatarM0 2 жыл бұрын

i was watching with my dad when this clip showed up we almost believed it xd!

@DannysGarage 2 жыл бұрын

Another fun tip for studs is to buy N54 exhaust studs, they work for all M5x engines and have little e-torx ends on them which makes installing them a total breeze.

@kvng.camzzz2123 2 жыл бұрын

Loved this series!!!

@nostrasimpus8359 Жыл бұрын

These M54 vids are great. Excellent explanations with great camera work. Subscribed

@Dawsel21 2 жыл бұрын

It's kind of opposite of what you would think, the “E” is for the Intake and the “A” is for the Exhaust just in german

@rabbitdrink 4 ай бұрын

gonna be einsomething and aussomething

@kozmaz87 2 жыл бұрын

For them sticky labels: grab a spraybottle of isopropyl alcohol soak the label with it and try to catch one of its corners and pull gently. Keep spraying the underside of the label while pulling it up and away. It comes completely clean off. What's more it does not hurt the adhesive just deactivates is and it will re-stick those antitamper stickers pose no problem to this method.

@wiseman1688 2 жыл бұрын

I learned soo much from this video, the details, and take time to explain in detail. Love how you keep your shop so nice and clean. Can't wait for your next video, keep up the good work.

@JamiesGarage1 Жыл бұрын

Thank you so much!

@ezeeboy 2 жыл бұрын

Invaluable information. Thank you so much sir!!

@Vass046 2 жыл бұрын

Brilliant video man! In the middle of an M54 rebuild myself so this has been a great summary of the work, especially some of the upgrades were good to know. BUT regarding the camshafts, you did install them correctly but got the comment mixed up. E is for intake, A is for exhaust. Don't imagine you can install them that way anyway but best to clarify. Keep up the top work, loving the channel!

@CrAzZyTheCodingBoss 2 жыл бұрын

@janthom91 2 жыл бұрын

Einlauf = inlet and Auspuff = exhaust. Had the same problem with a MAK M32 where our apprentice managed to adjust the valve clearance wrong because he thought the A meant air and the E meant exhaust. Luckily we found out before we started the engine.

@_bimmerfun639 2 жыл бұрын

That is right. E = "Einlass" = Intake side; A = "Auslass" = Exhaust side

@LSmiata Жыл бұрын

Nice catch! I was also worried at video 36:15 into video. And it is wrong to complain about markings. This is a German vehicle. Respect the language of the engineers that produced this engine! Hopefully, this was caught and caps between intake and exhaust are not compatible. YIKES! At ~36:48 in video, looks like he got it correct, but explained backwards. Can see timing chain for "A" cam and caps on exhaust side of engine......wow.....very scary! P-Chi

@MrCourty89 2 жыл бұрын

Firstly I want to say the quality of your build is 10/10, as someone who builds BMW engines and auto transmissions in the UK I can really appreciate the attention to detail you have gone too. There's just one issue I picked up on from your voice over regarding the camshaft caps fitting order. You said that the A caps were for intake and the E caps were for exhaust but you got this the wrong way round, I know it was just a mistake as in the video the A caps are fitted correctly to the exhaust side. I don't know if this can easily be edited into a video that's already up but thought I'd let you know but it's a great video nonetheless.

@iHelpSolveIt 2 жыл бұрын

A dyslexic error🤣 no wait, left hand drive side, not right.😆

@JamiesGarage1 2 жыл бұрын

Exactly 😂

@quinnemery1228 2 жыл бұрын

Really clean work man. Good job.

@bettybutler8306 2 жыл бұрын

The reveal of the completed engine with the ChrisFix logo is icing on the cake. Excellent detail. Great job as always!

@Lipitoarea 2 жыл бұрын

I hope Chris does not uses this engine.. this is a masterpiece for display only! Gg. Hard work!

@rane2324 2 жыл бұрын

12:17 smoothly cut to flip the rear main seal gasket around

@JamiesGarage1 2 жыл бұрын

Camera magic 😉

@KenMrKLC 2 жыл бұрын

I scrolled comments before posting figuring someone else def noticed also... I loved the camera fade away while spinning the bolt into the gasket which was just up against the gasket because the hole wasn't there lol

@Bd73551 2 жыл бұрын

Love how clean and organized your shop is!!!

@512TXSDIY 2 жыл бұрын

Wow! Love it. I like how clean your work area is.

@FAB1150 2 жыл бұрын

I find it fascinating how fast those 45 minutes passed. Great video! Also just a quick question, do you think installing piston return springs could help my Peugeot 206+ reach 500hp? Its 1.1L engine currently makes 60 but I reckon that with a bit of boost and the springs we could do it

@JamiesGarage1 2 жыл бұрын

You can do anything you put PRS to. 🤘

@aliciaANDanthonySandoval 2 жыл бұрын

Piston return springs🤣 you forgot the blinker fluid🤦🏽‍♂️🤣or the muffler bearings🤣🤣🤣

@hectorfmaldonado5875 Жыл бұрын

A real Master Mechanic, builds a master piece. And what a remarkable production, for the video. Thank you very much guys.

@ttbalog 2 жыл бұрын

Your attention to detail is out of this world. Well done, man!

@renardarctique 2 жыл бұрын

Personally I would have gone with 110 piston return springs for better fuel economy, otherwise nice build!

@tiger75ify 2 жыл бұрын

The engine looks awesome! What I don’t get is how the cost of this engine with all its upgrades fits in the budget that Chris had to comply with.

@maxminutiae1170 2 жыл бұрын

It’s a replacement engine in case the factory engine fails, that’s legal for the race he’s using it for.

@busterscrugs 2 жыл бұрын

since it's not in the car, it technically isn't part of the "$500" budget. if they put it in before the race then it'd count.

@tiger75ify 2 жыл бұрын

Thanks for info!

@SahilSharma-bt5vs 2 жыл бұрын

So satisfying to watch as parts go into each other like hand and glove

@J4rn0 4 ай бұрын

Realy enjoyed this series, thanks

@Mr.Nabil.Belhaj 2 жыл бұрын

The after market and repair shops are doing BMW's job for them by engineering better parts. Legend says that the best BMW engine is the one built by Toyota 😂

@Christopher_Jason 2 жыл бұрын

idk the M5x Motors are pretty bullet proof even in stock form with maintenance

@williamsnyder193 2 жыл бұрын

"No special tools needed here" *uses hydraulic press* 😂

@JamiesGarage1 2 жыл бұрын

You got me on that one! Lol

@williamsnyder193 2 жыл бұрын

Cool to see the whole assembly like this! Thanks for the video

@2010ngojo 2 жыл бұрын

What, you don't have a mutli-ton hydraulic press lying around, just in case you need to build an engine?

@rjordansr65 9 ай бұрын

You shop is Super clean!! Great content and outstanding upgrades!!

6 ай бұрын

What a great series.Thank you.

@tsurutuneado5981 2 жыл бұрын

21:05 I can see from the barcode that you got the premium "πston return springs"

@JamiesGarage1 2 жыл бұрын

Only the best

@seandillon3340 2 жыл бұрын

$500 lemon race and they have very expensive rebuild and upgraded secondary engine... 🤔

@Andy-by2jx 8 ай бұрын

Great video glad someone finally covered the return springs.

@dank8489 2 жыл бұрын

I bought a 330i as a track car project a while ago and to have a series like this is incredible! I really enjoy the quick, to the point delivery and its inspired me to get moving on my project!

@motube2389 2 жыл бұрын

How’s this legal to ChrisFix competition 😬 Isn’t supposed to be a $1000 build or something This bullet engine cost 5k easy

@Raven-rl7gj 2 жыл бұрын

Vert technical Jamie. It was interesting to watch. Great videography from your dad too!

@Giuseppe_De_Bellis 2 жыл бұрын

What a video! Keep up the great work! Cheers from Italy! :)

@Nneoh1 2 жыл бұрын

This series is so amazing!

@WildDigger 2 жыл бұрын

Very educational video. I have built plenty of old school American V8 engines in my time. This was a different experience to watch. Great work!

@ntsikha 2 жыл бұрын

Great series and a great collab Brother. Enjoyed every bit of it.

@tcpnetworks 2 жыл бұрын

That's a fine engine build there. The attention to detail is fantastic.

@edwardkarran4963 2 жыл бұрын

Loved this video, very interesting and satisfying seeing the rebuild.

@martinpavser3211 Жыл бұрын

Excellent video! Very detailed and thorough explanation!

@avrel820 2 жыл бұрын

Amazing work you definitely know what you are doing. Can't wait to see a new video :-)

@GabrielRamosxD 2 жыл бұрын

Amazing... Just amazing lol keep it up!

@jacobwilson7363 2 жыл бұрын

Ive been waiting for this video forever 👍

@zimmy700 2 жыл бұрын

I love your work Jamie, clean precise, informative, meticulous. Well done man 🙌🏻

@JamiesGarage1 2 жыл бұрын

Thanks

@itsnotfunny8257 2 жыл бұрын

I don't think people appreciate this video enough.

@louiscardinale1701 2 жыл бұрын

Thank you Jamie, and Chris.

@kaick8552 Жыл бұрын

Awesome work!!

@petersgarage6125 9 ай бұрын

What a great video. That engine will stand the test of time. Perfection.

@marksantos2276 Жыл бұрын

Jamie this was AWESOME thank you

@peevee605 2 жыл бұрын

Big Up for the attention to detail, dude. Superb work.

@antonio-andresfortezastefanova 2 жыл бұрын

This is awesome, Im so happy you made the video, because I actually thought that you will not make the video. Anyways, great video! ❤️

@stephenanderson1103 8 ай бұрын

Watched this M54 B30 video series twice so far!!! Excellent

@vebastiansettel1173 2 жыл бұрын

I'm subscribing!! This content is awesome!!

@JoeMACofNAC 2 жыл бұрын

Great work!

@TheJanis1993 2 жыл бұрын

thank you for this . i couldnt sleep and a motor build especially if its m52 or m54 for me is the best relaxation.

@Mzwandile_Makhowane Жыл бұрын

This way too impressive man! WOW!!! How I wish I could ship my own M54 To be rebuilt by your awesomeness. JUST BRILLIANT! 🙌🙌🙌

@simonbailey2151 2 жыл бұрын

Thanks. I always wondered what the windage tray was for. Great concise explanation.

@machtschnell7452 Жыл бұрын

Well done and you covered a lot of little things most builders ignore or gloss over.

@BryanClementi Жыл бұрын

This is so amazing! I had heard about Chris Fix's race car. I'll have to check out your video history but hopefully you have a video made on how to rebuild an M50 motor! I'm going to tackle that project very soon. Great video!

@130bowman 2 жыл бұрын

Excellent workmanship.

@tomapple944 2 жыл бұрын

Great Video, thx man

@bettybutler8306 2 жыл бұрын

Excellent video! Great content as always! Can’t wait to see what you do next

@JamiesGarage1 2 жыл бұрын

😉

@kolikomupise Жыл бұрын

Awesome video !!!

@crz666 Жыл бұрын

Awesome series, love the explanation, subbed!!

@JamiesGarage1 Жыл бұрын

Awesome, thank you!

@cpfb68 2 жыл бұрын

I'm not a huge BMW guy but totally respect them. You are an excelent mechanic and I appricate your OCD cleaning everything! I woudl do exactly the same thing! GReat video and great rebuild!