No video
GAME CHANGER for my trails - LaneShark LS3 - Day 86 (U)
Рет қаралды 12,176
Күн бұрынWe currently have over 2 miles of trails, and when I complete my mapped-out trail system, we will have over 3 miles of trails. We are an outdoors family, and these trails provide recreation, relaxation, and transportation to access our entire property. With a lot of trails comes a lot of trail maintenance.
The ground work is relatively easy; pull a cutter or blade. We want the above-ground work to be just as easy. To knock down the overgrowth from the sides and above, a pole saw was the tool of choice. While it's not incredibly difficult, doing it all day on miles of trails is not the exercise I look forward to.
Insert the LaneShark LS3. This is a hydraulic-powered articulating rotary cutter that attaches to the loader of a tractor. I have a BadBoy 4035H tractor, which calls for the LS3 model from LaneShark. While using it in the centered horizontal position is effective for a more targeted approach to rotary cutting operations, that's not where it shines. The most common use for this implement is to have it offset to the right and in the vertical orientation. This allows the operator to use the bucket lift and bucket curl to make targeted cuts high above the ground (about 12' with my setup) to address those overgrown branches and vegetation that will eventually take over the trail from the side and from above.
If you'd like to know more about LaneShark and the LS3 click the following link:
bit.ly/45VAC58
----------
💰 Coupons to save you money 💰
💲 - Router bits - use code JAYBATES for 10% off - bitsbits.com/
🌪️ - EF5 dust collector (use code JAY5 for 5% off) - jayscustomcrea...
💲 - Save 10% on all MicroJig products with the code JayMicrojig10 - lddy.no/ymdw
💲 - Save 10% on CMT saw blades with the code JayCMT10 - lddy.no/1g3aa
----------
Social links:
Lbry - lbry.tv/@jayba...
Odysee - odysee.com/@ja...
Twitter / jaybates86
Facebook / jayscustomcreations
Instagram= / jaybates86
@JayBates Ай бұрын
NOTE: According to the owner's manual, the hydraulic hoses should be disconnected before changing the position of the Lane Shark. I did not do this. Don't be a dummy like me.
@brucewelty7684 Ай бұрын
get a bunch of quik connects!
@raywolcott5279 Ай бұрын
Really enjoying you taking us along on the journey of transforming your property.
@frankcheney Ай бұрын
Ok, now I need that video of you working on your trails with this thing!
@thistledownwoodcraft3426 Ай бұрын
Yup!
@aaronblackford981 Ай бұрын
I really wanted to see the end of the video as your whole video. I should have known
@jimbecker5675 Ай бұрын
That's going to be an invaluable attachment for your new property. Congrats on adding it to your stable.
@FearsomeWarrior Ай бұрын
I spray paint my hydro lines. Makes it easier for the people using them when I can’t yell at them. Just a short blast to give it a colored spot. Red for pressure, blue for return. Like arteries in your body.
@woodbutcher9173 Ай бұрын
That's going to be very useful when the zombies come😂. Looking forward to the next video
@cobberpete1 Ай бұрын
When you have time, can you come by my place and do a little practice on my overhead brush 🤪 🤣.Be aware of those cut, falling branches Jay, I'd consider some head protection
@internetuser691 Ай бұрын
You need to go to the nearest big box store and get a 4’ stick of 3/8” or 1/4” rod and an old fashioned screen door spring. Affix the rod vertically and use the spring from the tip of the rod to a point on the hoses to keep them out of the way when using the lane shark. Drill a few holes in the rod to attach the spring to the rod and the rod to the lane shark, using self drilling and tapping screws to mount the rod to the lane shark (not on the mounting plate). A few zip ties to attach to the hoses, you’re all set, no more worries about cutting your lines.
@internetuser691 Ай бұрын
Also when cutting limbs, it really shines if you tilt the curl down on top of the limbs and cut on the downward sweeping motion.
@JayBates Ай бұрын
Got any images of this?
@internetuser691 Ай бұрын
@@JayBates unfortunately no, I’ve only used that setup on a “for hire” job. Wasn’t my tractor. But it works quite well. Personally I would have put the spring pole where it could be moved when adjusting the lane shark. The setup is something we used to do with hoses on bobcats back when I worked for Bobcat and was setting up machines for forestry service.
@johnwurst6691 Ай бұрын
Ok, cool attachment. Can I suggest you show it in action and then talk about it for 30min?
@heyitsthatdude17 Ай бұрын
Your BBL looks great Jay
@guybowers9094 Ай бұрын
That attachment is definitely going to be a game changer
@w8one Ай бұрын
Very nice residential mow/trim.
@FredrikRambris Ай бұрын
This property is making you get all new type of tools. 😊
@kennethnielsen3864 Ай бұрын
Thanks for sharing.
@brucemitchell5637 Ай бұрын
I think that you hold the record for number of attachments that you can fit on a tractor, Jay! Lol!
@felicadawn62 Ай бұрын
Why does that look like a giant weed eater to me? 😂 I can surely see the need at your place, though, Jay.
@bobbymccarley2134 Ай бұрын
Sweet implement!!!
@BirdYoumans Ай бұрын
❤❤
@thomastieffenbacherdocsava1549 Ай бұрын
Nice toy, eh tool Jay! LOL! Good luck , be safe!
@smu1129 Ай бұрын
You missed the opportunity to justify a jerry rigged chainsaw contraption 😂
@lennyross2813 Ай бұрын
Just bend the top John Deere quick connect. You may want to sell it one da y.. to me for $4 🤪
@dkang3239 Ай бұрын
Nice, like the vertical options. did u get any debris coming back at u when in using high up in vertical position ?
@JayBates Ай бұрын
no
@awldune Ай бұрын
I had the same concern and was glad to see he was wearing eye protection.
@louislandi938 Ай бұрын
How can you put a price on a tool that will allow you to do a difficult job better and faster?
@mikebarnstable7038 Ай бұрын
Really enjoyed this 36 minute commercial.
Midlife Stockman
Рет қаралды 1,2 МЛН
Philip Anders
Рет қаралды 29 М.