Love the flatwounds!

This is the best video for this question of all that I've seen for a few reasons. 1. New and old roundwounds, because if someone wants a dull sound, the comparison between old rounds and new flats is important. 2. Same bass and pickups, varied tone controls and playstyles, and the majority of the video is playing. 3. Bonus for using a Jazz, since that's what I've got.

Thank you so much for this awesome video. I love you just going all back-and-forth between all the different strings using different techniques. Because this is the most effective way to make apples-to-apples comparison. Thanks again for your hard work on this

A great video. Nice to see the different strings played on the same instrument and the same track to really show the (sometimes subtle) differences. As a new player I found this really helpful. Thank you.

Great video! Love the back to back in a mix in the beginning and then the breakdown at the end.

Used tapes for my first 10 years as they were on the bass (EB3) when I bought it and everyone else seemed to be using them AND we didn't know you had to change them. After more than 50 years of pkaying I still used them on EB3's and Fender Jazz as I found as you, that they work better on a jazz than a Precision bass. Great video, thank you.

Really helpful video, great breadth of playing (including the section with the foam!). Thanks.

Great video, you've done a nice job of giving the pro's and cons for each type of string. I've always played roundwounds and I'm happy with them but I think I'll try some flats to see how they feel.

Thanks for the comparisons! I personally love the tapewounds on my Jazz bass....I just love the warmer sound and feel....

I use Fender tape wound strings on a medium-scale bass and they sound great, but I liked how the new round strings sound in this video. You've got a lot of grove going on! Thanks for taking the time to make this video.

Great video. I’ll get a round wound set and let it get old for life! I love that tone and plus, I won’t worry about re stringing my bass

I love all of those tones. They all have their place. Great playing Jules.

Awesome video, thanks for the effort!

It's really all in the fingers, beautiful playing.

I do like the flatwounds. It just “thumps” and sounds more how I like a bass to sound. That woody little “thwack!”.

Great video, really well done 👍

Excellent overview thank youu!

Thank you for your heads up on the Fender Flatwound strings. I have been getting really hooked on this sound. I first tried the LaBellas.....and they were really good with a really good woodsy punchy vibe to them...but hence, the tension that goes with those strings is really strong, making my Precision difficult to play and frankly clobbered the set up on my guitar. I realize that it would make sense to get the guitar set up anew with the labella's, by while they sounded so good, it was challenging to push them around. But the Fenders you recommended (45 - 100) are really good, and has made the bass return to the feel and action I had before. Those strings had to be really pushing the truss rod around. Many thanks, JD

Thank you, I love my J Bass and I'm a beginner. The foam trick really was a cool idea to make it sound more like a P bass too

Thanks for this comparison. As known string types differ a lot between brands - so it’s great to hear the fender tapes and flats. My favorites for flats are still Thomastik for a dark sound and Chromes for modern flats. For rounds I prefer DAddario Nickel balanced tension or even better the Galli Nickel RSB. Best tapes by far (and I tried lots of brands) are the DAddario Tapes… so silky and smooth

Great info.Well presented.

Great video and thank you for using the same instrument throughout, it gives your demo much more credibility. I play rounds for the Basses I use in my Cover band because it covers most situations but have flats on a fretless and I love the sound of those too. Thanks to your video I'm going to try flats on my one of my other Basses to see how well received they are by the guys in the band.

Great video! I use dead rounds on my jazz bass, flats on my precision.

Really interesting stuff - thanks

Thank you for sharing, Jules! - I take you to have recorded the snippets per set of strings, then cut them to this sequence. ;-) Me, I have recently come to consider the strings as the items that really matter, and the bass (or any string instrument) as the filter ("equalizer") for those strings (as well as the thing to mount them on). So, starting with my basses, I'm in the process of "carefully" selecting combinations if instruments and strings, assigning them to different "niches". (Big words for an amateur without a band...) Whereas I started out standardizing my few instruments on the cheapest strings. As for basses, I love flat-wound strings. So I have had to promise myself to keep round-wounds (but maybe better ones) on that one bass. A year later I bought its 5-string version and a set of matching flat-wounds...

I have two short scale and two long scale. I choose the bass and strings that fit the song. D'Addario Chromes, D'Addario Nickels. One hollowbody 1968 Lyle SS, one 'P' bass, one P/J bass, one Fender Bronco SS. I need a set of tapes. No personal preference. They are all terrific and fun. Thanks, very well done!

Great video! Thank you! 😎🔥💯

very nice video! I'm looking at some tapes for a medium scale 5 jazz as my 1 road worn P has Chromes on it. cheers

Great great info! Thanks a lot

As a guitar player, I think, in the mix I prefer those Flats, silk touch, no string noise, big bass sound. I like when the bass is bassy, and when the guitar is mid rangy. Not a great fan of the new round wonds, too much string noise, finger sliding noise, zippy kind of sound. Tapewounds seem to be overkill. Great review and jam though, Thank You

Great video thank you.

Great Video

Hello sir! I switched from roundwounds to flatwounds a while ago and they are a blessing for my sensitive fingers! That being said, i kinda miss the sort of "edgy growl" the roundwounds can bring. But overall i'm happy with them. I play a Fender Jazz Deluxe by the way. Anyway, i like the groove that you play for this video a lot! Well done! Greetings from the Netherlands!

Great Video, thanks for sharing. May I ask, what strength the Nylon tapewounds are? The set wit E-string 105 or 115? Thanks in advance. 🙏🏻

I like the sound of the new round wounds best. Excellent demo.

Great highlights on so many bass guitar features. As a pseudo convert from guitar, I’m learning heaps! Thx. I really find the example bass line you play sooo groovy. Any chance of getting it on Tab?

Agree with you regarding the old roundwound sound - just like fine wine slowly turning into cognaq. But I must say - the flatwounds had a specific wow-wow going on. Tapewounds were least impressive.

great tone. what height do you have your pickups set to?

GHS Pressurewounds. Have it all. Great great playing too!

Flats on Jazz Bass McCartney, Danko, JPJ *chef’s kiss*

Do you ever talk about your amp settings? I am using guitar rig and Amplitube but I can never quite get the sound you're getting regardless of strings

Have your ever tried a bit of a mix of strings? Say for example flatwound on the E and A strings and new rounds on the D and G?

Nice sounds out of each strings. I do wish that you'd added groundwounds to the contest as well. But that's it for my gripes. Great videos otherwise! Big picture, I'm a bigger J-Bass fan than a P-Bass fan (though of course I love both), and on a P-Bass, the only kinda strings I really like are either flats or grounds. I don't like rounds or tapes on P. By contrast, I like each of these types (as well as grounds) on the J - but asymmetrically. The rounds I liked best with bridge or blend. With flats and tapes, I preferred the neck - which, compared to a P-Bass pickup, I think of as "vaguely similar sounding to P, but less chunky and more 'waxy' sounding." I think the difference is much easier to hear on the higher strings. With gentle playing in a mix, the low strings can become nigh indistinguishable. Anyway, that's my take! Thanks for uploading!

Hi Jules, i am picking up the bass after 30 plus years, back then i just pretended to play. Can you teach on line? I like your stuff, but i am truly a beginner.

NICE VIDEO, I USE D'ADDARIO NICKEL ROUND WOUND MEDIUM

Cheers mate

May sound strange to some, but i'm afraid the high tension of flatwounds would kill my MIM vintera 60's neck. I already had to send it to Fender and they replace the neck which was kind of bended and needed constant adjustment so i don't want to kill another neck. But i bought the jazz bass with the intention of putting flats on it, i don't know if ishould try my luck a second time. Has anyone tried flats on a MIM jazz bass? I Would appreciate any advise. I personally don't like lower tension flats.

Love the Flatwounds. ♥️♥️😄🎸

I'm usually deathly allergic to slapping (probably because I can't do it). But, the way you slap sounds great! But, personally I've been using pure nickel flats on most of my basses. But, I also use pure nickel rounds on one and the nylon tapes on another. I don't love one over the other. But, that's why I have different sets on different basses (most of them are Hofner basses, though).

Old roundwounds though. The Khrungbin bass philosophy. Lol sounds so nice

Thanks!

What is that first bass line from, for some reason I know that one, but I can’t place it. Thanks!

What about nylon wrapped flatwounds?

Herbie Flowers always uses tapewounds on his old Jazz Bass. Personally I usually run my Jazz Bass with older roundwounds through a DBX 286a which has, apart from a great compressor for bass, a dynamic low frequency eq which boosts at 80hz and cuts 50% as much at 250hz at the same time. By increasing the low end, it subjectively makes the high end less prominent.

woah! your running flat wounds through the body?! I've heard some mixed thoughts on that one. A lot of people will say they break while others say it can work. Do you find strings break easier going through body? I have a bass I would love to run flat wounds through the body on.

What strings would you recommend for a fretless bass? I wouldn't be inclined to use roundwound strings because of whare on the fretboard.

If you want tape wound strings to have some more tension, go up a gauge size

me sitting here playing my electric guitar on this beautiful backing track

The flat wounds seem to have a little more low end response

Are you using the same nut for all those strings?

Reminds me of level 1 from Sonic Spinball on the Genesis/MegaDrive (seriously, look it up)

I've got flat wounds on all my electrics; Telecasters and my bass.....Softer...easier to slide...much more comfortable for me to play. I dig flat or tape wounds.

4:15 PLEASE STOP IT SIR! Nice video, thanks!

flatwounds all the life! but Thomastik ;-)

I actually have hard time telling the difference. Maybe the backing track is a bit loud?

The flatwounds sound the best on the lower end of fretboard and the nylon tapewounds sound really good on the higher end of the fretboard

Flatwounds all the way and they are at home on jazz bass la Bella flats on mine

Flat wounds for sure. I hate the scratch sound of round wounds. Easier on the fingers, better for the bass. Using flats is like putting a supper charger on your fingers. Sound engineers like flats better too. I use flats on all my basses.

rounds for me always. sound better, more tonal options, and feel better to play. the finger/string noise is easily minimized by even decent technique, and can be used as an extra tonal weapon in your arsenal. muted sound can easily be achieved with tone knob and technique. or foam / hair tie if insisted. i just see no benefit to flats or tapes personally.

Boil roundwounds to bring high end back

Flatwounds have heavy darker tone.

My guess is that any person who claims to be knowledgeable about this, in a Pepsi challenge, would not be able to tell the difference. In a double blind test your score would be no better than random.

Ok just my opinion I have been playing bass for over 30 years. First off all you should take the form off the bass to give it a true sound to begin with, 2nd I have used flat and round wound and I definitely prefer the round wounds for this simple reason. You can get more sounds out of the round wounds, if you want to get rid of some of the highs just roll off the highs. Much more versatile and better precise sounds. As far the scratching sound, after years of experience and technique you should be able to overcome that. Just my opinion. Good playing.

I bought Tapewound strings for my Fender Mexican Precision Bass.... Hmmm.... 🤔🤔🎵🎵🎵

Lol the backing track almost covers the horrible string noise from roundwounds when your moving up and down the neck. Flat wounds every time for me

Stop pursuing the 'fresh out of the package' sound of round wounds, and set about discovering an equipment setting that 'mimics', if however may not quite replicate, that tone when you 'need' it, which I suggest is far less frequently than you are accustomed to because your ears have grown addicted to it for the additional pseudo significance it affords by attracting greater attention to your contribution. Your bank account will appreciate you for it. It was once the case that the 'sound' of new strings was loathed as a necessary evil come of needing to change strings for reasons of mechanical failure. Boiling was enough to...'refresh' your sound if you could be bothered. If a 'good' producer wants more...clatter, he'll secure it by requiring the drummer to do 'their' job, transient attack, thereby leaving you free to do 'your' job: providing a harmonic foundation for everyone. Never sacrifice the tonal center of the note for...the shimmer of harmonics that will be eq'd out of the mix anyway.