For more Information you can check out our website here. jdsgarage.bigcartel.com/

I love this plasma table build. Without your plans and the very inexpensive cost, I would have never even tried to purchase a table. I have done so much with this table and enjoy it so much. Thanks for keeping the price low and always being so helpful when I reach out. Looking forward to THC.

I have tons of electronics and motors, etc, from building several CNC machines over the last ten years. All I need are the plans!! 👍

I appreciate your concern with keeping this project cost to a minimum but honestly your table would still be a great value at twice the cost.

I wish you guys would start a "Forum " on your website !! All the JD Builders need to unite and share.

Currently building mine! :) Super excited and looking forward to some new projects, you guys are legends. Keep it up.

In the process of your build. So far your plans and communication when I’m making mistakes have been outstanding! Appreciate the updated information as I just finished printing everything and am now sourcing the remaining supplies.

Love the build Just ordered the plans. now the fun will begin keep up the great job you are doing making this so regular people can build something and lear along the way

i havent built mine but have the plans. really impressed with everything you guys do and how you keep updating the original offering. great tips on the steel and the hardware. i didnt know that about the hardware and when i was pricing it out through the big box stores things got wild quick.

I bought the plans a few months ago. I'm finally getting around to building. While my design for the table has changed the knowledge in your documentation is still well worth the price paid. Thanks and keep it up!

I bought your plans and the build is in progress. I am adjusting your plans to work with my existing table from Northern Tool. My X tubes have been changed out to 2" angle (1/8") and bolted to the table frame. Watching the various videos by you and several others convinced me to attempt this.

I buy tons of my steel from my local scrap yard!! I've got stacks of 1x, 2x, 4x, sheet of many different thicknesses, all for one low scrap metal price!! If you've got a scrap yard near you that allows you to buy scrap from them, check it out, maybe you can pick up on a few deals!!

I just found your channel, I totally look forward to learning more. Awesome content

Still working on mine... great plans easy to follow..

I purchased the plans and am really impressed with the details.

Not related to the plasma table but I just received your Crosskart spool kit and all my other parts to start building my rear end. I’m so pumped thank you guys for what y’all do!

I really liked the plasma table build video and bought the plans well over a year ago. One day I'll build it!! Old man syndrome!! LOL!! Thank you for your update video.

Currently building mine. I bought the plans when they first came out. Im trying to build it out of mostly repurposed steel. I'll send you pictures of my build when its done. Thanks again. Also looking forward to the thc

Hey hey I see my plazma table! Thanks for the great plans guys been using it a bit more lately, fusion 360 still hurts my brain lol but I’m slowly learning more stuff

dude, I don't have the space right now, but soon soon... can't wait to build this, thank you

Anxiously awaiting release of the THC. Keep us posted. Thanks.

I built mine in late 22 and using scrap steel and purchased electronics it was under $350. I made mods and enlarged to 36x36 table. This thing works great and was easy to build.

yall are awesome !!!!!!!!!

Fantastic project in the middle of it and well under budget. Even with European inflation

Thanks for the video ! Hope the THC is budget friendly 🤞🏻👍🏻

Will you be putting out a DIY version of the THC for people who have purchased the plans, or will you strictly be selling completed THC's?

Love mine thanks

I am currently at the wiring and electronics part and am a little over budget but I also bought the 3d printed parts and plates from you. I have also done some extras like drag chain for the wiring and a proper box to mount the electronics. Overall I am quite happy with the build instruction and plans.

Holy shit. I remember running a plasmacam with torch height control in highschool and never imagined I would ever be able to afford one. As soon as I can come up with a place to store this, I'm building one.

Excellent job, I’m going to go back and watch your build. How many hours do you think you have on it?

Beautiful project guys! I’ve purchased the plans but i’m a bit confused from the electronics,can you make a detailed video about it,maybe it can be useful for people like me that don’t know much electronic stuff!Thank you!

Thanks again for making these drawings, I have made one basis same. But is it not a new drawing of a table we see in front of you? :) Looks like double rails?

Bought the plans back in July, cut up all the metal, but started traveling a lot for work. Recently got back to work on it and it's just about done. The plans and support are great. It's a fun project, now I will actually use my plasma cutter that has been sitting for years. I am over budget, but only because I only had a weekend to buy steel and the only place open jacked up the prices. I also added the Zone-axis. Now I just have to get comfortable using it. Thanks for all the effort you guys put into this.

awesome video

I bought the plans, still haven't built one yet. I already have a plasma table, just wanted to support some fellow minnesotans. I am looking forward to the release of the thc

I've got mine running and already cut a ton of stuff.Fusion 360 was too much for me. I already had Aspire so I got it going using that . Thanks

The cinematography is amazing.

I have built this recently in the uk, the cost is alot higher now but still was worth it. main savings i made was getting the water pan folded up with a golden handshake and getting the 3d printed parts done professionally (again with a golden handshake) Unfortunately and this is no discredit to jd, but for $350 that is if you are already set up as 3d printing metal tooled wizard. It will cost you more if you are an average garage man but dont let it put you off - the plasma cutter and compressor will be your main cost.

what plasma machine re you using on the demo machine? this looks great by the way!! good work.

Just for the record Arduino's are $28 now on Amazon as well as the OEM Website. Still excited to begin the assembly proccess!

Our place just sells by kilograms. whatever you need whatever shape they'll cut. In the morning they drive around in town and deliver their parts - so free shipping included.

Amazing project my question is can the table be welded together instead of bolts.

amazing project my question is can the table be welded together?

Very very interesting project, can the X and Y axis be elongated, so it can work in bigger steel area

One thing people need to know the software is a big issue fusion is web based not an offline program so for people without a dedicated internet the cost gets expensive

I just picked up some 8’ Thomson linear motion rails for $100 each. It’s a rail, belt, bearing block and nema 34 motor mount and flex shaft coupler. Just need motors, drivers and a frame. He’s got 12’ units I can get for $150. I plan to buy all 20.

i just bought your plans and i’m trying to print everything out but have no idea how. u make a video on how to build it but not on we’re and how to print all the information you send us. are you able to help.

scrap steel can be had at the steel yard especially if they offer cutting sevices. they often have a scrap bin they will sell you steel out of. also your local scrap yard often will re-sell steel tehy have taken as scrap. Locally-i have a scrap yard that has full sheets some times..

I have a huge scrap yard near me that sells everything only the lot at 33cents per lb.. So finding the steel is no issue for myself.

I purchased a Cut 50 plasma cutter a few months back. I was wondering if I would be able to use it.

amazing

Do You Itself at its best!

I do mostly freehand plasma cutting for metal arts. However I do want to be able to do a few brackets and such. What really got me looking at this is the pipe notching add on. I use a lot of pipe in my studio projects and the angles and sizes are numerous. When I freehand them I end up doing a LOT of grinding. I have a Thermal Dynamics Cutmaster 60i with an SL50 torch. I'm trying to figure out if I have to buy a different torch or can somehow modify this one or add a port to control the on/off. If anyone has done this I would be grateful to know. I'm not really sure where to start this portion.

Hey guys! I'm thinking about getting your plans and finally building that table. I'm a little concerned if I can get all the parts in europe. I guess you provide a shopping list of which things I need to buy don't you? Especially about the electric motors and all that stuff. Did you get any feedback about availability in EU?

nice setup....can the table be made larger? i know its just more metal, but will the computer run everything if it was a 4x8 table?

Please do a video where you walkthrough how you tune, setup, and then program a tube cut with your rotary axis attachment.

Despite my deepest respect for your work I will definitely encourage my fellow hobbyists to read my experience and reconsider whether this plasma build is your best way forward. I acquired the drawings from JDG invested and everything needed and here is my learning: Most of the stuff presented is linked to from US suppliers. Here in Northern Europe this means more than doubling the prices due to transportation and import fees. I spend a lot of hours searching for local suppliers and I only found prices far higher than suggested from JDG. The X-axes profile is described as a 50x50x1.5mm tube, and it cannot be replaced by profile with thicker walls. None of the European suppliers I work with does have this in stock since it is a rare size seldomly used. Despite my OK experience with 3D printing (Ender 3) I never ended up with acceptable prints. The printed objects have thick walls and 85% infill, which is beyond my 3D printing skills. I wasted more than a kilo premium filament trying. Conclusion: I found a cheap engraving machine on German EBay with almost the same work area. It took me 6 hours to change it to a plasma cutter and I spent the same amount as my JDG attempt

My only advice is use aluminum tube for the x axis. Mine is great that way. Good to get updates on this. Mine is awesome. I like it better than the Langmuir Crossfire I have access to

Hey guys , i purchased the plans and the plastic kit a while back , interested in purchasing the upgraded instructions and tips and tticks if you have it in a manual ?

Is the Z axis control required for thee rotary axis and THC? I also see that there is an Arduino R4 with has wifi and BT built in for nearly the same price as an R3. Would that be a good option?

stop panning back and forth between both cameras im getting sea sick one video setup would have been fine

On my list of things to build, my 3d printed parts arrived safe and sound a few months ago still not go round to it 😂😂😂

Do you have plans for a 5x5 plasma table? Something that could later be extended to a 5x10?

For the electronic enclosure I got a hf screw bin for $15.

Do you sell complete units.I just want to bolt together plug in and play.

The "filtering" you are doing for the THC... ..... thats due to high frequency start plasma cutters, right? And after you add the filtration/isolation.....does that mean a high frequency start plasma cutter will then work correctly? One more question that I came up with.... Since you are building it yourself....there is really no limit on size....you COULD theoretically build one 4 times as big.........just change all the coordinates in the software, right? (probalby have to truss the arm a bit...maybe counter balance, but still doable, right?

Saw the ndsu poster in the background are y’all from the Fargo area my dad wants me too learn too build this Cnc plasma table and was wondering if u guys are local if he’d just be able too buy some of the parts from ya in person.

What 3d printer do you use? What are the minimum requirements are needed for a 3-D printer to build these parts? Maybe you could do a video on your 3-D printer?

What size electrical enclosure would you recommend?

I have a Eastwood Versa Cut 40 Amp Plasma Cutter will it work with the plans?

Have you had any experience with a YESWELDER CUT-65DS plasma cutter?

I just came across your budget build, and this video was posted 8 hours ago! Is it possible to increase the table size to say 4x4? If not that is not a problem, this will work for 90% of what I need it for, for the time being. I will be buying plans tomorrow! I am most likely going to be needing to order the 3d printed parts.

Has anyone been able to use this table with an older miller plasma cutter? I have an old miller 375 x-treme with the ICE-27T torch and not sure if it will work as it’s not low frequency?

Love the content, love you guys, appreciate you trying new things cinematically, let's give this dual camera interview a pass next time

Is that package available as yet and what's the cost

i got the plans and the stuff but wow... this is not as simple as it would seem... way more to do here than i expected. i would really suggest you organize that massive plan stack to be more of a a STEP BY STEP thing. after the frame im lost

Do you think you could mount a laser head on it?

As of today 3-12-2024 it can not be built in my area for under $350. The Amazon links for all the items listed in the kit not including the water pan was more than $350. Still a good deal in my opinion.

I bought the plans for the CNC table they are great. Easy to build. However , I just got to the point where I'm ready to make some cuts and my titanium 45 plasma cutter torch won't start off the switch relay for some reason. I check continuity on the torch trigger and on the relay. So I have the correct wires connected to the torch relay. When I fire the relay the torch won't start. But when I pull the torch trigger manually it fires no problem. Looking for any ideas that can help please?

how much sag in the cantilever arm?

hello is it posible for me to buy one already built coz wea i come from some parts wud be very hard to get.

Are you limited to the size of the table?

❤u guys rock but unfortunately mines a paper weight after paying someone over and over to help me mine still dont work still struggling understanding fusion 360 hopefully eventually mine will be rockin and rolling also over 500 into by tube bender that I still can't get right but it's user error me finding the wrong people to help!! thanks for the vids !!

id like to print my own 3d printed parts i looked on your site but only see the pre printed parts

Just about to order the plans & parts… now that Fusion360 is pay to use can the software work with FreeCad ?

Now I know this takes it way out of the price range, but has anyone built one using 2x2 aluminum instead of steel?

What G code sender are you using?

M5 fasteners are expensive, I have changed all the ones I can to more common M6

That's actually really cheep, those nemas are prices in eu like small nema 17.. Same with other components..

Is it possible to make this a bigger table with just more square tubing or does a lot have to change like the programming?

Hi there where can I buy your parts?

THC when?

As much "FUN" as I am having with this project, I can't figure out how to install the post processor to Fusion 360. The vids I find talk about clouds and libraries and preferences none of which do they show how to find these things. I've watched your video, and it doesn't explain it either. I need an Idiots Guide to do this install. After 3 months doing this build that has had everything that can go wrong, go wrong I'm frustrated. After getting the wiring done, I find out the motor wires are supposed to have Drain wires. Never seen anything about that. The other thing I can' t find are the files to make the Z mounting plate or the files to make the roller if I decide to do that. Maybe I'm just stupid, or I have incomplete instructions I don't know. I am WAY over budget and still need the water pan and the slats, also no mention of slats. I seem to be the only guy having these problems. I don't have a young computer geek to turn to. I really need some clarification here.

Приветствую всех, автору канала спасибо. Есть кто то из русскоязычной аудитории кто повторил проект?

It would cost me 260.00 just for the 2 inch square tubing.

I’m over $700 into the build using the BOM and still haven’t bought any hardware, steel or plasma cutter.

How can it be only 350$? I made a few big heavy CNCs in last 10 years (with ESP32 and AtMega2560 electronics designed by myself, balls screws, NEMA 34 12.5Nm strong servo steppers, 2.2KW and stronger vfd water cooled spindles) so I can cut steel with these machines and OK it could be made for under 1000 euros. I made cheap 2.5" touchscreen THC. BUT!!! I spent 600 euros for 3x400V 100A plasma! It can not be found cheaper! How can you find so cheap under 350$ plasma?

The back and forth between cams is kind of annoying.

Where's the cost of the plans? 😅

Couldn’t watch this video past the 55 second mark. Apparently more cameras is not better.