Awesome job, heavy attention to detail, patiently done and the care shows. Schweet looking ride.

Damn, man. Great job. Got me wanting to do the same....

I've done this to all my jeeps about 4 years ago....once all my buddies seen how sweet it comes out all of them have done the same thing. Freaking love this stuff. Good job man

That is a sick looking Jeep 🔥🔥🔥

Unwrapping like on a Christmas morning! Excellent 👍

8:13 would look awesome with a touch of bright green striping, the tape actually looks good around the header panel

Agreed, that looks badass. I just took of all the plastic door skins on my 95 ZJ and am doing the bed liner to the same elevation as the skins and the bumpers.

Absolutely outstanding!! Loveeee itttt. This is exactly the car i want exactly like this . Awesome job

Much better can't wait to do our 2000 Cherokee Classic in silver.. Nice job thanks fir the video.

Just a few more months I’ll be doing this to my Jeep as well. Mines also red. Plan on doing it the correct way much in the same as you did here, with a few added steps. Possibly some air brush or decal stenciling, Nice work 👍🏾

Great job champ ! Looks amazing nice craftsmanship

Very nice!!! I have a 97 Grand Cherokee that I had Rhino Lined. It looks great and gets alot of stares and comments from time to time.

Had a friend do this about 3 or 4 years ago to his XJ. Looked awesome. Moved the front axel forward , lift, lockers , 38s, Atlas etc. On the taller creek banks the front end was just to light. Gotta Toyota on propane, 42 Super Swampers cut, I think , front forward , lift, lockers etc. This thing is a absolute beast!

That looks awesome! Funny thing is the grill looked really good with the lime green outline from the tape! 😂

Sweet job, I love that look

If you told me that you were planing to do this job. I would think to myself. WHAT. But with this sort of vehicle it makes sense. To see the finished job, quickly changes your mind about, the WHAT factor. It does look pretty good. Great work.

That is serious attention to detail man. Very impressive

Awesome have the same stuff on my 2001 XJ but green never scratches and dirt comes off super easily the best thing I’ve done so far in terms of esthetics

Great job man! looks Awesome..great advise too

That looked really good you did a good job I do body work too and I got a 99 Jeep Cherokee that I want to ride online so it's good to see what it's going to look like when I'm done

Thats is one sexy Jeep! Nice job on the spray!

Looks fantastic!!!

Deliciously sick looking! Awesome job there..

looks awesome!

Awesome work. Looks so good.

This one got a very presentable, good looking finish, it's up there among the best according to what many of us like. Well done at a decent cost and it was done in good taste. It's easy to throw cubic money at a project to get a predictably hoity toity shiny paint job. This one turned out great after some work and imagination, I like it a lot.

That looks amazing great work

I own this just bought it about a week ago n you did one hell of a job love it

great looking job

Very practical, love it.

Super cool paint job

Bed liner looks great on a off road rig. It was so satisfying to watch the ugly red disappear. Awesome job

Agh! It came out soo good mate!!

9:14 Man, this looks real mean!!! I love it!!! I’ve always wanted an Xj to use as an off-roader, since my JK is my daily driver.

That some legit work bro 🔥

One of the cleanest Raptor Liner jobs I’ve seen thus far. I’m still deciding on a color and I’ve also been wondering if you could add some sort of metal flaking to this product. Job well done sir! 👍🏼

Love this style of video

I've Raptor lined all my armor and tub and trust me when I tell you...spend the extra $50 on the Upol vari-nozzle gun. The end result is night and day. You can adjust the texture for a consistent finish from micro fine to coarse and won't clog up and spit blobs of liner like the gun the kit comes with. Plus, adhesion promoter for all the tight nooks and crannies. Lastly, don't spray till the bottles empty. The residuals on the bottom of the bottle always gets clumpy.

I really like the matte black

Imagining this happening to my jeep. I need a good shop!

Superb Work

That turned out awesome! 👍

Thats a great job well done!!!

Great job

This is awesome I’ve been wanting to do this to my van!

I love this truck

I need some armor panels for the exterior of my van. Ribbits look awesome

Well done sir.

Nice work dude ❗️

looks badass

Looks good

Thank you Great video !!!

Sick dude!

My 16 year old alutraego say man it would go real fast now !! looks great.

That jeep looks pretty mean! Nice work man!

Dude that’s looks A-amazing!!!

Looks supernice

Damn. That turned out nice. I want a jeep cherokee so bad.

Congrats on laying down one of the smoothest, if not THE smoothest, bedliner jobs!!! Not to knock anyone, but you see a lot of blotchy DIY jobs and it can turn you off to doing a full vehicle. But you Sir, show that you can get a great result. Thanks for sharing!

Looks killer!

Very nice job. Since the paint in my 89 is ruined I might go this route.

Looks nice!

I was thinking about doing this to my XJ looks good

I think any idea that allows more Cherokee xj's to go on living forever is a great idea. The world will be a better place for it.

Like it, Nice Job. DIFFERENT ‼️👍👍. Vinny 🇺🇸

Thats dope AF!!!!!

Looks great!

That's nice I got my Hummer h3 line x it came out nice

8:01 rig looks pretty slick with the solid front grill, charger/challenger vibe.. wonder if its possible to get enough airflow to the road with some kind of solid panel there, add some hood vents for sure

Looks sick! I love it. How it performs after that time?

Looks bad ass 👍

Great job, looks good.

BAD ASS bro....mine is next!!!...hahahaha

Sup mem , you killed it with this paint job , its still the best bed liner job ive ever seen . I was wondering for your prep you just sanded the clear off added some new primer where it was on bare metal . And then did you shoot 1 or 2 coat ?

Hell yeah brother✊🤙

I would love to do this to my WK in green, forest or hunter green would be awesome. Good job with this.

Looks Good but what do you do with the door jams? Is that product to thick? Thanks for the video. I have been thinking about doing the same to mine (it’s in the thumbnail).

Job well done.

Nice video. Your accent sounds like my whole family from Philly and New Jerz.

wow thats badass

Awesome!!

Yep....... totally badass.

Thats fucking sick! Nice job!

Where did you get the taillights cause I need some and those are sick

Wow that looks amazing. I would love to bedline mine but I feel like I would fuck it up.

Very nice

Sweet! Black matt?

This is now a stealth vehicle.

I’m spraying mine tomorrow almost forgot about the windshield wipers😅

Thats cool. But doesnt bed liner color fade over time ?

I drive semi. I was delivering drums of bed lining and undercoat to a shop out in the sticks. I had this idea years ago. Now I see you doing it. It looks great. Good job. I like your attention to detail.

Shoulda kept the rc logo on the panels red, wouldev popped

That red color looks nice alrdy

Great job! It looks really aggressive

Hey man, great job. Could you please share how much products you have used? I live in the UAE and I'll have to order from the US, just want to get the amounts right so there's no hold up. Thank you

a question I want to ask you after painting your truck with Raptor Liner, the paint does not lose the shine that remains after painting it, that is, with the dust and dirty it does not remain opaque, and later when you wash it, the paint raptor texture?

Very Nice

Been good to do the jams if enough product remained (with time to spray it) and why not remove the bolt on body panels and scuff/spray rather than depend on seam seal? (Ive never had a jeep that didnt get a fender flare bumped enough to dislodge a bond to the body) keep in mind, ive never dealt with bolt on body panels, so my previous question may be ridiculous, if so, its out of my ignorance on the topic, not as a "troll". Thanks. Looks awesome

My boy actually did the Reveal at the End 😭 👏

i really want to have a car like this