The tire rub on my stock inner fender liners is driving me crazy! So lets fix it with a set of the American Adventure Labs quick release inner fender liners.
Пікірлер: 23
@Bifrost_jt7 ай бұрын
Such a great video helped me on my install!!
@2ndChanceOverland7 ай бұрын
Glad it helped!
@silasgaldamez358716 күн бұрын
Awesome video, i just recently installed them on my JLUR and i am running a similar set up with the steers smarts parts and the teraflex 2.5 inch lift. But I noticed i couldn’t reinstall the sway bar disconnect park bracket that goes next to spring tower because it hits the new inner fender. Any idea what I could do to get them back on there?
@user-vk7zm2gt3sАй бұрын
Great video - thanks for sharing Did you have any clearance issues at full stuff by not chopping the fenders? Did you find anything to fill the holes in the stock fender where you drilled the pins?
@That_Guy_Outside11 ай бұрын
Great video - thanks!
@2ndChanceOverland11 ай бұрын
Glad you liked it!
@grantparnesАй бұрын
Good on you, but not for me. Getting rid of full mud coverage and going back in with half mud coverage. Wires exposed and something else to corrode that plastic does not offer. Did you by chance think about moving your entire front axle forward with the adjustable arms 1/4 of an inch?
@creekerjeeper3879 Жыл бұрын
Would you recommend blue loc-title on the inner fender bolts.
@stanleycarpenter15214 ай бұрын
I want to see the install on the driver rear with all the filler vent relocations....
@2ndChanceOverland2 ай бұрын
There are no filler vent relocations needed with these.
@Troothless5 ай бұрын
You don’t need to remove the rivets to pull the liner out. Just push up on the liner where the rivets are. Easy as that.
@2ndChanceOverland5 ай бұрын
Yeah, I figured that out when I did the AAL inner fenders on our 392. Much easier and cleaner. Thanks!
@iFanchi Жыл бұрын
Would have like to see it with the tires installed.
@2ndChanceOverland11 ай бұрын
Thanks for the feedback. Ill keep that in mind for later.
@khoop0096 ай бұрын
Really don't like the exposed wiring for the front turns. Do they make something to cover the fender flares?
@2ndChanceOverland5 ай бұрын
Not that I am aware of.
@markcaruana2697 Жыл бұрын
What finish did you choose for the fender liners, how are they holding up?
@2ndChanceOverland Жыл бұрын
I chose the textured black finish. They haven't been on long, and only one light offroad trip since installing them, but they are holding up great so far. I also recently purchased AAL's old 2018 Wrangler JL that they had installed them on and they are still in great condition with all the wheeling they did with that vehicle.
@off-roadskys4250 Жыл бұрын
Did you have clearance issues on rear shocks. My adjustment handle is hitting inner fender. Curious if yours was hitting and if you just made a cut out for it
@2ndChanceOverland11 ай бұрын
Yes, I did have clearance issues with that. I had to cut out a notch for the rear shock adjuster. I also had to cut some off of the front liners to clear the Teraflex Bumpstop 2.0's that I installed.
@ovrlnd_g8r10 ай бұрын
@@2ndChanceOverlandthat’s great info to include in the video
@bobbyg75528 ай бұрын
Great video, wish you would have gone into a little more detail in removing the front liners
@2ndChanceOverland7 ай бұрын
Thanks. Removing the liners was a bit of trial and error. I drilled out the plastic rivets the hold the liner to the outer edge of the fender on this one, but I don't think that is the best way. When I did the same thing on my 392 I actually used a panel tool to pry the liner off the rivets leaving the rivets in place. Cleaner look that way.