Jeep Grand Cherokee SRT WK2 Remove Front Bumper FAST with Fred_eazy21! SRT front Bumper Removal
Tools required:
Flathead screw driver
Plastic rivets and rivet gun
10mm socket and Ratchet!
1. Take your time and remove the plastic rivets in the wheel wells.
2. Remove 10mm bolts in the wheel well and the bottom of the SRT Bumper,
3. Head up top to remove the plastic clips.
4. Carefully pry the bumper out!
To remove the front bumper on a Jeep Grand Cherokee SRT WK2, you typically follow these steps:
Prepare the Vehicle: Park the vehicle on a level surface and engage the parking brake. Ensure the ignition is turned off.
Disconnect the Battery: For safety reasons, it's a good practice to disconnect the negative terminal of the battery to avoid any electrical mishaps.
Access the Bumper: You may need to raise the front of the vehicle slightly using a jack and support it with jack stands to access the underside of the bumper.
Remove Underbody Shield: If there is an underbody shield covering the bottom of the bumper, remove it. This shield is typically held in place by several screws or bolts.
Detach the Fasteners: Look for screws, bolts, or clips holding the bumper to the vehicle frame. They may be located under the hood, along the wheel wells, and under the front of the vehicle.
Disconnect Wiring and Sensors: If your vehicle is equipped with fog lights, parking sensors, or any other electrical components on the bumper, disconnect the wiring harnesses carefully.
Release the Bumper: Once all fasteners and wiring harnesses are disconnected, carefully pull the bumper away from the vehicle. It may be helpful to have an assistant to support the bumper as you remove it.
Inspect and Store: Inspect the bumper for any damage or wear. Store it in a safe location if it won't be reinstalled immediately.
Installation: To reinstall the bumper, simply follow these steps in reverse order. Ensure all fasteners are securely tightened and all wiring harnesses are properly connected.
Reconnect the Battery: After the bumper is securely reinstalled, reconnect the negative terminal of the battery.
Always consult the vehicle's manual for specific instructions and safety precautions before attempting to remove or install any components. Additionally, having a professional mechanic or automotive technician perform the work is recommended if you're not confident in your abilities.
For more Great #Mopar content please subscribe!