Jeep NO HEAT Fast Pinpoint / Fix Wrangler JK Temperature Blend door actuator

No video

Jeep NO HEAT Fast Pinpoint / Fix Wrangler JK Temperature Blend door actuator

Рет қаралды 388,288

4 жыл бұрын

*Door Actuator: amzn.to/2CzvrL7
*Milwaukee M12 Rachet: amzn.to/2Silnwk
Quick overview of how to diagnose why your Jeep Wrangler JK has NO HEAT. This is in a 2014 model and it ends up being a faulty temperature blend door actuator which is a very common failure on these. If your engine is not getting up to operating temp or one/both of the heater core hoses are cold this video wont help you. `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: kzfaq.info...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com/cgi-bin/webscr...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy
~Sailing Doodles: / @sailingdoodles

Пікірлер: 366

@dalecoddington 2 жыл бұрын

Thanks for sharing this, it was a lifesaver! Especially since the dealership wanted over $400 to replace it. Took me less than an hour thanks to your video.

@daveeslinger1265 3 жыл бұрын

Perfect mix of on-target information and visuals, without a lot of needless blather and self-promotion. Heater is now working - thanks!

@NoNonsenseKnowHow 3 жыл бұрын

Great to hear the video helped out and I appreciate the feedback. Thanks

@TK8286 2 жыл бұрын

EXACTLY!

@travisnewman6710 3 жыл бұрын

The quick fix was exactly what I needed. Been driving in 25 degrees. What a treat to have heat again! Lol

@NoNonsenseKnowHow 3 жыл бұрын

Awesome!

@simoneaux15 Жыл бұрын

THANK YOU!!!!!! My heater quit working about 2 weeks ago and we’ve had the coldest winter that I can remember in FL, I flushed the heater core over the weekend still no heat, very frustrating. Came across your video and thought I’d try it, looks simple enough. Fixed my heat!!!

@brentcolicchio7218 3 жыл бұрын

(2014 Jeep Wrangler JK) I actually just fixed it w/out having to take anything apart...The plastic arm was just jammed in the spline shaft. I laid my head underneath, awkwardly, and shined a flashlight on the white arm and pushed on it till it moved. I turned the Jeep on and switched from cold to hot and it worked on its own. 😊 Thanks for the video!

@NoNonsenseKnowHow 3 жыл бұрын

awesome! and no prob

@JimmyMoultray 2 жыл бұрын

Trying this when I get home!! Because BRRR

@markstevens4883 2 жыл бұрын

Oh, can you do that without taking off the plate? I'm gonna go see.

@cassandrafullerton3953 2 жыл бұрын

2014 Wrangler JK, no heat. Moved the plastic arm up the spline shaft. Heat is working. Of course, I had it mostly torn apart before I realized I could see the actuator arm from underneath the dash. Very awkward node positioning, but know I know that is indeed a quick fix. Thank you for the video and this comment! 🤙

@Blucifr Жыл бұрын

Thank you for this comment! You’re a lifesaver. This comment and video combination are top tier!

@NoNonsenseKnowHow 4 жыл бұрын

*Door Actuator: amzn.to/2CzvrL7 *Milwaukee M12 Rachet: amzn.to/2Silnwk

@recarox 3 жыл бұрын

Wow, thank you!! Great freaking video!! I’m in the process of learning more and more about fixing my Jeep Wrangler 2013 JK. I recently had bad clicking in my dash and my steering controls weren’t working on right side. I replaced the actuator but blindly not realizing the air duct was so easy to remove (being novice). Thus creating my AC/heating system to stay in the “heating” position. It’s looking like based off this video I set the arm in the wrong position. Wish I found this video when I first replaced my actuator 🤪 thanks again dude for great audio, video, and explanation 🤘

@eagleturtlestar 2 жыл бұрын

God sent god sent ! You are a blessing. O’Reilys had door actuator for $25 and my oldest son (13) put it in. I held the flash light and screws 🔧. I went 1.5 years shivering before seeing the right video and working on the JKU to fix the problem. Thanks again. Lessons learned.sooo glad the $tealership didn’t get my 💵 fixing this part!

@friendsvilleflash8220 Жыл бұрын

Thank you for being quick and to the point and not just talking to hear yourself talk like a lot of the KZfaqrs You definitely helped me with my problem thank you have a great day

@robinchadwick5501 Жыл бұрын

OMG! Thank you thank you. Concise, no silly music - just the facts. I’m a 75 year old retired Hospice nurse and living on SS. I narrowed down this topic to this NoNonsenseKnowHow. I was going to try myself but son came over and did it! Heat - yay!

@borismartin6276 2 жыл бұрын

Great video. One helpful tip: i believe in most JK's that airduct is actually split lenghwise ("two halves"), so if you press on the sides it will pop open and then it is very easy to remove and reinstall WITHOUT having to unbolt that module in the back. Will save you some extra tinkering and bolt dropping ;)

@adphotojon Жыл бұрын

Oh man!! I just finished replacing my heater core shedding serious blood sweat and tears, and of course I still have no heat! Ughhhhhh!! This is my next endeavor! Thank you so much! I can’t think of what else it could be! I swear I hear my actuator working, but maybe it’s something else! Back to the grind! 😂 🙌🏼🙌🏼🙌🏼

@3wilko 9 ай бұрын

This was exactly my problem and this video was a big help. I saved 2 hours of shop labour (about 300$ these days) Thanks so much.

@ebgwd Жыл бұрын

Instructions are so precise that I automatically subscribed to your channel! Short and sweet, just like it needs to be.

@JimSix-jo6hf Ай бұрын

thank you for this, I am a pro mechanic but had never done one before, you saved me a lot of time and it is working great

@jamesmardis8974 2 жыл бұрын

2017 Wrangler: No heat. Hot water to heater core. Actuator not working. Took it apart and tested actuator motor and it worked. Put it back together thinking it was some other issue and it worked. Must have been a bad connection. Thanks for the super simple quick instructions. ++++++++++

@roccodifrancesco3514 Жыл бұрын

Thumbs up and thanks for making this video! This will be helpful for years to come with so many JK Wranglers on the road. The info, camera shots, and pace was perfect for the DIY crowd. Thank you again!

@adamdejesus4017 3 жыл бұрын

Very helpful today. Turns out my actuator was only "stuck" once I shoved it manually it went back to correct operation (no replacement required...yet!) Thanks for showing exactly what to look for.

@theflyingboxcar4804 3 жыл бұрын

Awesome video. Thorough and quick, no nonsense or dumb music, great camera work and lighting. My wife lost heat in her '14 JKU just today, so tmrw I'll be looking into this. Thanks very much!

@NoNonsenseKnowHow 3 жыл бұрын

No problem, glad it was helpful and I appreciate the feedback

@Scotty007S 11 ай бұрын

Great video - the actuator had died on my 2014 JKU. I followed your steps and now I have heat! Awesome … thank you very much for the tips 😉

@adalbertorodriguez4979 Жыл бұрын

Great video; however my air duct's removal was the most difficult part of the job. I highly recommend splitting the air duct prior to attempting to removing, it made it much easier. The same can be said as to the reinstallment of the air duct, install the part that clips to the vehilce first, followed by the end that snaps to the air duct.

@jakewalters2929 6 ай бұрын

Well just when i thought i was bamboozled, i found this quick vid, read some comments, and have my jeep ready for the road ahead. 🔥💯💯

@drewcasner6529 2 ай бұрын

Thanks for this video. I too was able to give the linkage a push and got things working. Love the short and to the point repair videos

@ScottyCosmo 3 жыл бұрын

Awesome vid Bro. Completely thorough yet shorter than many other vids that only cover half of the info ... Thanks! Getting the lower duct off was my issue. You covered that!

@NoNonsenseKnowHow 3 жыл бұрын

Glad it helped!

@mz6829 Жыл бұрын

Thank you for this information. My mechanic's est. for the blend door actuator is $157 + labor $155. I appreciate you.

@piggy59873 2 жыл бұрын

Dude you saved me a bunch of headaches. I have a lifetime warranty on my 2013 wrangle unlimited. so now I can tell the service department what the actual trouble is Saving me time at the dealership

@ScottSmith-hc3ij 2 жыл бұрын

That was the best video ive seen ,you did the fast version,i just needed to see what i will be needing to take off, already did the one behind glove box , 2013 jku ,thanks from huntsville alabama

@JesusUnsheathed_ItIsWritten 2 жыл бұрын

Great video, 17 jk unl, cold air, no heat, used video to diagnose, was able to unjam the lever, now its functioning, thank u 💪

@chegguser2102 9 ай бұрын

Thanks! My jeep just went out of heat but my service appt in 2 weeks away but we just got snow in Denver! Your video showed that the replacement is cheaper than my warranties deductible so I’ll do it myself! Thanks so much EDIT: wasn’t my issue. The engine hoses were hot and the dial of heater was communicating with the actuator. I saw the actuator move as it should as I turned the dial. SMH

@deathb4digital 9 ай бұрын

In my case (2011 JK), the pivoting arm was just jammed in the cold position. Without taking anything apart and laying on my back in the footwell, I took a look upwards directly above the gas pedal area and with a flashlight had a pretty clear view of the mechanism. With the key on I rotated the dial and nothing was moving. I used a piece of wood dowel to poke and prod the part around a bit, heard a click sound, and it came back to life. I sprayed some white lithium grease on it and it seems good to go. I'm still going to buy a new part though and replace it in the very near future. Thanks for the video!

@coriw8602 7 ай бұрын

Did you have to remove anything to see and get to it? Thanks 😊

@stevevanvechten3301 2 жыл бұрын

Great video !!!! I had to replace my actuator today and your video helped me out. Thank you.

@louisalexander9984 7 ай бұрын

Thank u...u just saved my day my heat wasn't working..I just lifted the liver up

@michaelgile5749 3 жыл бұрын

Fast and to the point, very helpful!

@JoeGottschall 3 жыл бұрын

Thank you, I fixed my 2013 Jeep Wrangler by just reaching up and pushing on the actuator arm. It had been on full AC for six months or so and just needed a little nudge.

@NoNonsenseKnowHow 3 жыл бұрын

Good stuff! And no problem

@brentcolicchio7218 3 жыл бұрын

Just did the same thing with my 2014 and it works fine now!

@chuckhall9569 2 жыл бұрын

I want to thank you for the help on video for heater not working. I didnt have to replace nothing. The white lever ATM was stuck like you said. Now I have heat. Thanks much Chucky from ky.

@NoNonsenseKnowHow 2 жыл бұрын

No problem! Glad the video was helpful

@charliemorgan68 2 жыл бұрын

Great information ....Saved me allot of time trouble shooting will let you know after blend door actuator is replaced . Thanks

@MrMjrob 2 жыл бұрын

Wow, THANK you bro! I have a '16 Patriot but everything is similar to Wrangler. I just needed to give my actuator a few taps. Great vid, info man.

@MrVelocity1971 Жыл бұрын

Same problem her on my 2012 Rubicon... turned out to be the blend door linkage grease got sticky and it wasn't opening all the way. Cleaned both plastic arms and added a dab of grease. BAM! Fixed!

@jenniferschmitt3831 Жыл бұрын

Thank you for this! I was able to fix my daughter’s Jeep heater after watching it.

@NoNonsenseKnowHow Жыл бұрын

No problem! Glad to hear it was helpful to you Jennifer

@Happy-Camper 8 сағат бұрын

Thanks for the video I tapped on my actuator and it started working. Hopefully it stays working.

@MrJuxone 3 жыл бұрын

This was a great video, but I would recommend you tell folks to remove the bracket that is next to the floor vent and held on by two 8 mm bolts, this provides enough room to actually get your hands in there. ALSO, I would strongly recommend you tell folks to REMOVE the driver's seat (a pretty simple task) to allow room to work. I notice in your video there are two bolts laying on the floorboard that appear to match the front seat retaining bolts. BTW the floor vent was really hard to pull out.. :)

@tomz7866 2 жыл бұрын

Thanks for the video, after watching this, mine was just stuck also. Now if I ever do have to replace the part, I know where it is and where to get the replacement.

@shawncharles3765 Жыл бұрын

After flushing the heater core, changing the thermostat, it was that part. Thank you!!

@TS-ef2gv Жыл бұрын

I'm having the same problem (not blowing warm) and am doing the research to help me troubleshoot it. I have read that if you've narrowed it down to a dead blend door actuator, no movement out of the arm, etc, before you go to the trouble of removing and replacing the actuator, try unplugging the actuator, plug it back in, and see if the actuator now moves. Some people have reported this "reboot" got their actuator functioning again. It may or may not work for you, but it's worth a quick try before replacing it.

@johnnylo694 3 жыл бұрын

Thanks brother you were a big help now my heat is working before it gets cold out here in nyc

@NoNonsenseKnowHow 3 жыл бұрын

Awesome to hear and thanks for dropping a comment!

@dalehastings7711 Жыл бұрын

Great video! I've got the opposite issue, heat stays on, I'll give this a try!

@markpasseretti2826 2 жыл бұрын

You are amazing and saved me so much annoyance with taking it to a shop.🙌🏻🙌🏻🙌🏻

@NoNonsenseKnowHow 2 жыл бұрын

Hey, awesome to hear It helped dave ya some time and money.

@Revann27 2 жыл бұрын

Oh man! Gonna give this a go, hopefully it works for me. Great tip by the way!

@markdavidson6321 2 жыл бұрын

Super helpful to me and made my replacement far easier. Thank you!

@comerford2009 3 жыл бұрын

Worked great - great tip on breaking the duct into 2 pieces. Thx!!

@NoNonsenseKnowHow 3 жыл бұрын

Awesome to hear! And I appreciate the feedback

@sydneysexton5661 3 жыл бұрын

Thanks for the video, saved a ton from having it fixed at the dealership!

@NoNonsenseKnowHow 3 жыл бұрын

That's marvellous to hear that you were able to fix it yourself Sydney! Thanks for commenting

@eagleturtlestar 2 жыл бұрын

Yes from the $tealership

@GoodGuyStein 2 жыл бұрын

Great video. I’ll say getting that duct out is easier said than done. Mine broke lol not a big deal since I almost never use the floor air.

@mikeshelton9750 4 жыл бұрын

Thanks for the video. Followed it step by step. Once I took the front bracket off after the panel, I was able to see the actuator. It did not turn when I moved the dial. With a couple pokes at it with a screw driver, it began to move. Saved me some $$$. Thanks again.

@NoNonsenseKnowHow 4 жыл бұрын

Awesome. No problem and Merry Christmas!

@NoNonsenseKnowHow 4 жыл бұрын

Are you still planning on replacing it? Or just going to see how long it lasts?

@tejano2828 4 жыл бұрын

@@NoNonsenseKnowHow Same thing here just gave it one tap, heard a noise and heat works again I will probably replace it once the garage gets warmer, doesn't seem that difficult. thanks for the video.

@NoNonsenseKnowHow 4 жыл бұрын

@@tejano2828 no problem man

@brentcolicchio7218 3 жыл бұрын

I actually just fixed it w/out having to take anything apart...The plastic arm was just jammed in the spline shaft. I laid my head underneath, awkwardly, and shined a flashlight on the white arm and pushed on it till it moved. I turned the Jeep on and switched from cold to hot and it worked on its own. 😊

@shanelapp9342 9 ай бұрын

Thank you so much for the well done video! Very helpful, thorough and quick!!!!!

@witchesbru67 4 жыл бұрын

Thanks for the video!.....going to try this out. Had my coolant and thermostat changed about a month ago....everything worked great until a few days ago. Getting only 110 to 120 degree heat in the dash registers now....was getting much higher before.

@NoNonsenseKnowHow 4 жыл бұрын

No problem, glad to help out. Definitely start by making sure the engine is getting fully up to operating temperature. If it is then more than likely it's just the blend door

@craigmitchels272 2 жыл бұрын

In your case. You may need to pull one of the heater hoses and fill them with fluid. If it's not the blend door, it's just air in the line to the heater.

@witchesbru67 2 жыл бұрын

@@craigmitchels272, well it wasn't the blend door. That was operating correctly. I decided to remove all the coolant and replace it. Also back-flushed the heater core and "burped" the system......that seemed to do the trick. The heating temp went from 120F to 145F....outstanding!

@tubesteak5001 2 жыл бұрын

Great vid. Got my 2013 JK heat going again. Many thanks

@jenhart1779 2 жыл бұрын

Thanks brother!! Big hands in small places, I’ll give her a shot.👍

@Dubya 2 жыл бұрын

Perfect!! Short and informative. I hope this fixes mine!

@JohnCoffins 3 жыл бұрын

Thanks for the video! Fixed my heat and my daughter and wife are warm. Lol

@NoNonsenseKnowHow 3 жыл бұрын

no prob! and awesome

@CB-br9jc 3 жыл бұрын

We followed your steps and have heat again! Thanks!

@NoNonsenseKnowHow 3 жыл бұрын

awesome. and no prob!

@indio1917 Жыл бұрын

Great Video. I'll do this to my 2015 Rubicon to eliminate the overheating problem I'm having. The reservoir keeps getting full, so I have to re-fill the radiator (but not losing antifreeze). I hope this solves my problem. Thanks

@davidmilovanovich9415 2 жыл бұрын

Hello thanks for the info and Supper great video!!!! It helps me a lot in case the heater ever starts running cold

@NoNonsenseKnowHow 2 жыл бұрын

No problem! Thanks

@iowa621 Жыл бұрын

Gunna try it today and see if it helps! Great video!

@josephbonilla5910 4 жыл бұрын

Thanks for sharing brosky 😊

@flyinghigh370 Жыл бұрын

Thanks! This was exactly what I needed!

@markstevens4883 2 жыл бұрын

Back in February, I took my 2014 Jeep, same as in the video, to get the heater fixed, he charged me $126 for the actuator, and $95 to replace it. I figured I was being overcharged, but, if it works, I'll take the hit since I have very little mechanical experience. In other words, like most people, I'm at their mercy. When I picked up my Jeep, I turned on the heater and hot air blew out. So I paid and off I went. I live in Southern California so I haven't had much need for the heater. Fast forward to November, I turn on the heater, and no hot air. I did like the video says and checked the hoses while running, and they were warm, so it's the actuator that I paid over $200 to replace. I'm pissed off. I'm going in tomorrow to see if the guy will correct his shoddy work. today, when I get home, I'm going to look inside by removing the plate and see if I can check on the little door lever and see if it's stuck. Thank you for the video.

@seangsull15 2 жыл бұрын

So? Now I'm intrigued

@joachimjohan1215 4 жыл бұрын

sweet quick and on point!

@patricioyanelysoto4015 7 ай бұрын

thanks for your video just replaced mine thanks to you

@Rmilms 3 ай бұрын

Nice video. Thanks for sharing. Would it still be on the left hand side on a RHD vehicle

@froj.p6364 Жыл бұрын

Hey bro! Thanks. Went really smooth. Mine didn’t even need replacing, the plug was just disconnected. However I have a problem now. Check engine went on. What did I mess up? Lol

@kylepratt1334 2 жыл бұрын

You saved me so much money! God Bless you

@158mollie 2 жыл бұрын

Good job you really got in there with good video

@danieljk1589 3 жыл бұрын

Fixed my heater thanks to this thanks so much

@NoNonsenseKnowHow 3 жыл бұрын

No problem! Great to hear the video was helpful

@victoralvarez8944 8 ай бұрын

Thank you for this great video.

@johnnylo694 3 жыл бұрын

Thanks brother you helped me fix my heat please I had the steering wheel remote adapter which you help me remove with this video thank you🙏🏽

@NoNonsenseKnowHow 3 жыл бұрын

Awesome to hear it helped out and thanks for dropping a comment!

@craigversetti5700 10 ай бұрын

ABSOFUCKINGLUTELY FANTASTIC 💯 VIDEO !! been working on cars , bikes really everything for about 40 years so i went straight to the thermostat , figured it was common and cheap but after quickly swapping it i still had no heat . I then search KZfaq and after a few found yours , immediately checked it and that was it so I replaced it then can't straight back to you hit subscribe & like !!! To the point no thrills & fills and I like it that way so THANK YOU !! will definitely keep supporting you bud !!

@cornwasher 3 жыл бұрын

Great "How To" video. Thanks

@lazarocruzchavez9940 Жыл бұрын

Thanks, this video really help me out.

@mcmurray1678 2 жыл бұрын

(2013 Jeep Wrangler JK) so the problem was the actuator so this video was very helpful! However when I plug the actuator in the arm spins 360 degrees, is there any way to change that? I haven't screwed on the actuator to the frame because I'm afraid the plastics gears will just strip or burn out.

@Dinoflint91 3 жыл бұрын

3:03-3:10 took me 25 minutes;) Other than that, your video was spot on and did the trick. Good stuff, thank you. FYI, the blend door actuator is Dorman #604-029.

@NoNonsenseKnowHow 3 жыл бұрын

Awesome to hear the video was helpful and I appreciate the feedback! Thanks

@MrAidan97 3 жыл бұрын

How did you get the top screw out? I can’t seem to fit a screw driver up there

@Dinoflint91 3 жыл бұрын

@@MrAidan97 Socket screw driver

@Libertarian100000000 2 жыл бұрын

Dormant #604-029

@joejet8 9 ай бұрын

Did you need a scan tool that the Dorman tech notes tell u to do?

@lylekliewer4787 6 ай бұрын

Yeah, that little doo dad that you weren't sure of, (at about 2:40) is the control unit for the automatic transmission, or TCM. It has 2 connectors that run the length of the bottom of the module, both with locking squeeze tabs. They require a firm pull straight down after squeezing the lock tab, to disconnect, and a firm push to reseat. I normally disconnect the negative battery terminal before disconnecting electrical connectors, especially when they connect to a computer, but I failed to do that this time and wound up with a U0101 fault code. I disconnected the battery, and went back in to reseat, and discovered one of the connectors wasn't locked in all the way. I don't know if the code was the result of failure to disconnect the battery, or failure to properly seat the connector, but I suspect the latter. Anyway, I was able to clear the code with my little cube code reader even though it said it couldn't be cleared that way. Thanks for the video, it helped me bypass a dodgy hvac control module so that I could have heat while I await the part to arrive.

@robpeters993 Жыл бұрын

Excellent. Exactly what I needed to know!

@chewbaccac-3po129 3 жыл бұрын

So I just bought wrangler 08 and it did blows some hot one side and cold air from one side. I'll try that out. Thank you for sharing friend

@NoNonsenseKnowHow 3 жыл бұрын

No problem! Good luck getting it fixed. If you look down in the comments, a few people discussed having a similar issue is you

@alnavas1265 Жыл бұрын

Thank YOU....great guidance having same problem on my 2013 jk.

@NoNonsenseKnowHow Жыл бұрын

No problem and awesome to hear that it was helpful

@BobMixer1 3 жыл бұрын

WOW awesome explanation and demonstration!!

@NoNonsenseKnowHow 3 жыл бұрын

Thanks Bob. Appreciate the feedback

@Gary-bq3nu 4 жыл бұрын

Nice. Great video. I had 4 videos lined up to watch, but this one says it all. You pointed out everything that might be going wrong, so I'll be checking all that in the morning. Thanks for posting this.

@NoNonsenseKnowHow 4 жыл бұрын

Awesome man, good luck on the repair and glad to hear I made it in the rankings! lol. lmk how you make out

@Gary-bq3nu 4 жыл бұрын

OK - So I watched the other videos anyway just for a comparison, and I kept wanting to pop the link to your video into a comment and tell them to go see how an instructional should be done. I didn't want to be mean though, so I won't do that. Your video is far superior in every way. It's quick and to the point, no nonsense, no cutesy video tricks... nothing but what I needed to see. Thanks again!

@Gary-bq3nu 4 жыл бұрын

@@NoNonsenseKnowHow OK will do!

@Gary-bq3nu 4 жыл бұрын

I'm Subscribing too.

@NoNonsenseKnowHow 4 жыл бұрын

Thanks, I greatly appreciate your feedback! That's what I really strive for it in my videos. I try to gear them as fast as possible without skipping important points. And thank you for the sub

@paulhartje829 2 жыл бұрын

With all the good reviews I’m confused about what I’m doing wrong. The floor vent that looked like it slid to the left, pretty easily, is shattered into many pieces and the end with the tabs is still in place. Any suggestions on how to get that out?

@dougbartleson9852 10 ай бұрын

Awesome video thank you!!

@timothyclifford7164 Жыл бұрын

Thanks. Mine was just stuck in the down position. Just needed an adjustment 🔨 to move again

@richgran 3 жыл бұрын

Right on man, you gave a quality tutorial there my friend.

@NoNonsenseKnowHow 3 жыл бұрын

Glad you found it useful and thanks for the feedback!

@richgran 3 жыл бұрын

I do have a question for you, I found your video well looking for a "how to flush your heater core" video. I also just changed my engine coolant temperature sensor. Should I have had engine coolant spill out of the sensor port when I remove the original. I have a 2013 Jeep Wrangler rubicons 3.6.

@NoNonsenseKnowHow 3 жыл бұрын

@@richgran I'm not sure I understand your question. Yeah it's normal for some coolant to spill out of the temp sensor port

@richgran 3 жыл бұрын

@@NoNonsenseKnowHow I figured so, I asked because I didnt get any spillage, but was expecting it to spill out when I removed the sensor. I'll check the fluid level next. Thanks for your reply.

@NoNonsenseKnowHow 3 жыл бұрын

Sometimes it doesn't spill if the system is completely full and the radiator cap is on. That is normal also

@isabelvickery8068 Жыл бұрын

This fixed it!! Thank you so much!!

@alanhowson6061 3 жыл бұрын

Great video, blocked heater matrix is also a known cause for no heat, which can be flushed out fairly easily.

@NoNonsenseKnowHow 3 жыл бұрын

And thank you for your feedback!

@NoNonsenseKnowHow 3 жыл бұрын

Yes. I've seen one or two.

@stephenwayne7055 2 жыл бұрын

What is a heat matrix?

@alanhowson6061 2 жыл бұрын

@@stephenwayne7055 Basically small metal tubing with 'fins' that acts like a car radiator to distrubute heat/cold into the car. They're usually buried behind the dashboard and can clog up if the car is left standing for long periods.

@Souls_Worn_Thin 2 жыл бұрын

@@alanhowson6061 oh OK, just never heard it called that. Thanks