Shop this Mopar Rubicon Bumper: terrain.jp/2TwvY6M Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
@nstooge11 ай бұрын
I replaced the plastic bumper on my Mojave with a metal Rubicon bumper. I love it. Swapping out the orange bumper hooks on the Mojave for the red ones on the metal bumper was a real pain until I figured out how to get those thin clip/nuts off. I also had to trim up the metal skit plate which comes on the Mojave. I think the bumper swap made a huge improvement on the looks of my JT. Don’t be scared off by the price. I think you’ll be happy with one.
@extremeterrain11 ай бұрын
Thanks for the feedback!!
@eugeneenslow85632 жыл бұрын
I like the look of the Rubicon bumper as well as being able to install a winch. I would hope I could find a much better price from someone replacing their Rubicon bumper with an aftermarket bumper.
@snapcrack5510 ай бұрын
🌟Big Tip:🌟 remove your grill, then remove that plastic piece you drill out. MUCH better access to the inside bumper bolts. The driver side still SUCKS but it's a little easier.
@chrishunt52915 жыл бұрын
You still.have to buy a winch plate for a winch to mount on that bumper.
@michaeld5775 Жыл бұрын
Great video as always from Extreme Terrain. Please wear eye protection when under the Jeep on a creeper!!
@extremeterrain Жыл бұрын
Thanks for watching!!
@JohnPaul-jn1fo3 жыл бұрын
no skid plate?
@joegarcia33105 жыл бұрын
You got me at 1000 definitely cheaper bumpers out their.
@extremeterrain5 жыл бұрын
You're definitely correct! There's a bunch of different options out there! But if the Mopar Rubicon Steel Bumper is what you're looking for, we offer it! Thank you for watching! - Zach
@jasongonzalez74093 жыл бұрын
I believe you can get it cheaper online.
@camaroboi13 Жыл бұрын
I got the knockoff for 430 shipped and had it powder coated to match my gladiator
@LarryRichelli3 жыл бұрын
how to put a license plate on this if you have a winch?
@jblancostudios9534 Жыл бұрын
Looks a lot better but The back side of the fog lights are now exposed?
@chrisfusco11085 жыл бұрын
Did he say, Robicon?
@demisx3 жыл бұрын
11:04 - what’s the torque value for those nuts? The ones that secure the bumper to the frame.
@LarryRichelli3 жыл бұрын
Mine did not come with the wiring harness. Just the pig tails and a connector from each fog light. Can you please tell me the wiring harness number.
@Jason_P5 жыл бұрын
I'm not usually one to bitch about pricing but the $1055 asking price is absolutely ridiculous, especially considering it doesn't come with a winch mount or skid plate. I like this piece, but will gladly get any one of the bazillion other options that are half that cost (and include a winch mount).
@Ferda19645 жыл бұрын
thanks Ryan
@dylanwalsh5105 Жыл бұрын
Is there a reason you didn’t reinstall the splash guard? Is the plastic splash guard not compatible with the steel bumper?
@SDguitarplayer858 Жыл бұрын
Im wondering the same thing
@dylanwalsh5105 Жыл бұрын
@@SDguitarplayer858 Turns out the plastic Air Dam is NOT compatible with the Steel OEM bumper.
@guidok37625 жыл бұрын
I bought one for mine European Rubicon.... 🇳🇱❤️🇺🇸👍✌️
@oscrm17603 жыл бұрын
Where the link please im searching that same european rubicon bumper for jeep jl 2020
@oldirtytrezzo29817 ай бұрын
9:43
@backwoodstrails4 жыл бұрын
Can this be installed without the power tools?
@bpguitarist72 жыл бұрын
I installed one with just hand tools, but I was wishing I had an impact wrench for those main nuts.
@burgerking13273 жыл бұрын
Will it effect the sensors on the front??
@TheAlphaMale Жыл бұрын
If my plastic bumper comes with halogen and my new steel has the led fog lights am I able to just plug the wires from the halogen to my led fogs with no problem?
@extremeterrain Жыл бұрын
Depends on the light, but most of the time yes!
@iliadisjohn3 жыл бұрын
Thank you so much for this helpful video! Quick question: Are there no front parking sensors for this bumper??
@extremeterrain3 жыл бұрын
Thank you so much for watching, John! This front bumper does *not* come equipped with or come pre-drilled for parking sensors. -Zach
@mohamedel-kady6154 Жыл бұрын
Hello, thanks for the video. Please advise the weight differences. Can you also advise if I have Sahara and if I changed to steel will this add lot of weight to the front? please highlight this ASAP if possible 🙏
@extremeterrain Жыл бұрын
The weight of this bumper fully shipped is about 30lbs. The factory plastic front bumper is about the same because of the tow hooks and inner steel frame. You wouldn't be adding much weight at all when switching to this front bumper!
@mohamedel-kady6154 Жыл бұрын
Thanks a million for your support, indeed, I fixed the steel rubicon front bumper, I measured the height of the car with the plastic bumper the with the steel bumper, I lost only 2mm of clearance which is negligible according to my limited knowledge.
@guidok37625 жыл бұрын
The plug and play doesn’t work with the European bumpers........, wrong connector !!!!!!! ☹️
@julio1027078 ай бұрын
What size tires are those?
@extremeterrain8 ай бұрын
These are a 33" tire on a stock non lifted JL.
@micho243 жыл бұрын
Nice video, whats the set up on that sahara? Lift? Offset tires?
@extremeterrain3 жыл бұрын
Thanks for watching. Michel! Our Sahara is actually all-stock outside of the wheels and tires. It's riding on 285/70R17 wrapped around17x9 Mammoth D Window Steel Wheels! Check out the following link for more info! -Zach www.extremeterrain.com/mammoth-jeep-wrangler-jl-d-window-black-steel-wheel-17x9-j100952-jl.html
@JM-rp3lx4 жыл бұрын
Do I need to buy the steel skid plate ? Or do people usually take that off anyway. Thanks
@yangxu90654 жыл бұрын
have you figure out ? im buying the steel bumper and wonder if the plastic skid would fit or not
@betweenthepines40003 жыл бұрын
Both the winch mount and skid plate are purchased separately
@isiahwilliams14273 жыл бұрын
Is this only for rubicon? Can I put this on my 2018 jeep jl sport?
@extremeterrain2 жыл бұрын
You *can absolutely* install this on your Sport! -Zach
@Beacheditionwrangler Жыл бұрын
Do you need adapter or spacer
@extremeterrain Жыл бұрын
Nope! All parts needed to have this bumper installed on your JL are included in this kit! -Zach
@sdmedicscott4 жыл бұрын
can i flat tow behind an rv with this steel bumper?
@mikedye79484 жыл бұрын
Of course. Depending on your flat tow solution you may need to cut the bumper though.
@willboyd80212 жыл бұрын
Can it be too heavy for jeep Sahara
@extremeterrain2 жыл бұрын
Not at all! This will do just fine on a Sahara. -Zach
@willboyd80212 жыл бұрын
I just added to my jeep yesterday steel bumper and winch and suspension has went down in the front It’s a Rubicon front bumper.
@extremeterrain2 жыл бұрын
Aftermarket front bumpers (and winches) of any kind will likely do that, regardless of installing one on a Rubicon, Sahara, or Sport. You're adding extra weight to the front of your Jeep. That being said it, its not hurting anything. Most people choose to install a 3/4" spacer after to keep the front of their Jeep level. -Zach
@EODHammer4 жыл бұрын
My 2020 Rubicon has incandescent bulbs in the headlights and bumper...WTF
@justinkrzynowek91662 жыл бұрын
Rubicons did not come standard with metal bumpers or Leds. These are both separate packages to buy. Metal bumper package is around $2000 extra and led lighting is close to $1500 extra.
@justinkrzynowek91662 жыл бұрын
I purchased my 2022 Rubicon with the led package but not the metal bumper. I upgraded only the front metal bumper after purchase. I personally don't see the need for the metal rear bumper. Saved a few dollars doing it this way
@EODHammer2 жыл бұрын
@@justinkrzynowek9166 I wound up putting LED’s in every single receptacle. Bumpers, winch, tires, wheels, kings, entire front end (steer smarts) exhaust etc. Looks and performs great. Just cost a fortune to do it
@justinkrzynowek91662 жыл бұрын
@@EODHammer Yeah I did that with my previous Jeep TJ then quickly learned adding leds costs alot of money to do it right and adds up quick lol
@keithcastle8792 жыл бұрын
How can I add a Nilight 20" light bar to this bumper?
@kaylee63842 жыл бұрын
GOOD DAY. THANKS FOR VIDEO. HOW DO I CONTACT YOU?
@extremeterrain2 жыл бұрын
Thank you for watching! You can give us a call at 1-877-870-8556 or by email at support@extremeterrain.com! -Zach
@justgonnastay3 жыл бұрын
SHOW ME THE STUBBY!!
@bighuch79985 жыл бұрын
What was the 16mm socket used for?
@abdullahandejani90745 жыл бұрын
Can i but my halogen fog light on the steel bumper , i have a 2018 jl sport
@ShawnL87114 жыл бұрын
Abdullah Andejani comes with LED. Plug n play... as stated in the video
@7evenslots6003 жыл бұрын
He does state it comes with LED fog lights but the site listed states the bumper does not come with lights or hooks. Disappointing, either way since it’s conflicted information which leads to mistrust.
@PNM_795 жыл бұрын
Will it fit a '16 jk?
@snovak22335 жыл бұрын
nick ikslatam yeah I’ve heard most Jl bumpers fit Jks
@GentleGiantFan5 жыл бұрын
It should. There's a video by CJ Pony Parts where they see what JL parts fit on a JK.
@joedabill995 жыл бұрын
Yes, this is the same bumper that came on my '13 jkur 10th anniversary. This bumper is known as the "freedom/10th anniversary" rubicon bumper.