Jeep Wrangler Clutch: How to install new clutch

No video

Jeep Wrangler Clutch: How to install new clutch

Рет қаралды 77,668

Күн бұрын

Latest Performance Clutch I am installing linked below:
1994-2004 Jeep Wrangler 4.0L Clutch Kit: amzn.to/467TiOm
New clutch installation on a 1992 Jeep Wrangler YJ 4.0L
3/4" Pilot bearing: amzn.to/3jsn7QL
Clutch replacement video series. From start to finish!
• Jeep Clutch Replacement
Channel sponsored by Enginetech enginetech.com/
Engine rebuild kit I used on my 4.0L rebuild: amzn.to/2WuNdbu
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
👨‍🔧 A few of my favorite tools 👇
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver I use. Love this thing
amzn.to/2fTDoTR
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
video was sponsored by south bend clutch
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Пікірлер: 47

@shanerr857 6 күн бұрын

I'm doing my YJ and your videos really help, thanks

@dougharlow6037 3 жыл бұрын

Dale, Just a word of caution, always test fit the pilot bearing on the end of the transmission shaft, no matter what don’t trust the part number or book information before installing. I also use a touch of thread locker on all bolts. Good content. Thanks

@danjarvis6980 11 ай бұрын

@dougharlow6037: True true- Words of wisdom sir-thanks for sharing.

@mechanicmotorvehicle7083 2 жыл бұрын

Use old top Gear shaft for removing & refittint clutch assembly. Loose the bolt nuts diagonally. Use drift for placing the holes properly of flywheel refitting

@craigfarndale4260 4 жыл бұрын

You do great vids, can tell a lot of work goes into it. Well appreciated. Very informative. Clutch looks great.

@Tom-ik5sc 2 жыл бұрын

You said Mishawaka correctly on your first try haha. I actually live in the South Bend and Mishawaka area ... Just a couple miles from SB Clutch, actually

@JeepSolid 2 жыл бұрын

Haha! That's awesome. Thanks

@mefistofer 4 жыл бұрын

Great video Dale! I am sooo jealous of that electric ratchet of yours, I refuse to do any more work until I get one!

@natalioguido2362 4 жыл бұрын

Great vid! really wanted to see that throw out bearing install

@JeepSolid 4 жыл бұрын

Throw out will be coming in a video soon.

@mitchellcrager9933 6 ай бұрын

If it's a Toyota miles don't matter 😂😂 had a Tacoma with 220,*** miles and still had the original clutch, and it was always climbing hills or digging in mud. Still caught early and worked like the day I got it. But now I have burnt a few out on the late 80's little S10s 😂😂 But I was also young and dumb then. Great video man !!

@Itiswhatyoumakeit Жыл бұрын

Thank you for your helpful videos

@vboytan 3 жыл бұрын

I replace my clutch. Judging from a bunch of videos on KZfaq I did everything correctly. It’s a 06 TJ with a 6 speed. Now it’s rattling when the clutch is disengaged. I have read that the clutch fork could be rattling due to the retaining spring being faulty. I replaced everything in there except for the that spring,the fork and the throw out collar. The noise goes away when I engage the clutch/step on the pedal. I’ve also read this was normal but the old clutch was not noisy like this one. I might end up removing and inspecting it again. Damn

@TheGentry34 4 жыл бұрын

Thanks for making these videos I changed my oil pump after watching your video on that main bearing next I guess

@ClintonSnow 11 ай бұрын

Excellent Job.

@2006derald 3 жыл бұрын

Good videos but it would be nice if you would tell us the size of the bolts and nuts.

@boldlord6937 3 жыл бұрын

Pressure plate bolts are 13mm

@kansaspatriot2051 4 жыл бұрын

I’ll be doing mine on the CJ this winter! Another great vid!

@JeepSolid 4 жыл бұрын

Cool! Hope this helps ya out

@theoutdoorswithsundown4576 Жыл бұрын

Great video

@restrallete007 3 жыл бұрын

Great video. Thanks!

@kylekelly3843 4 жыл бұрын

like all your videos man you do good work

@JeepSolid 4 жыл бұрын

Hey! Thx Kyle

@petergosinski3967 4 жыл бұрын

I have a 1995 wrangler with a ax5. Sometimes it just completely lockes me out of gear when it gets warm i didnt know if it was a clutch

@JeepSolid 4 жыл бұрын

Could be that the clutch isn't releasing properly.

@MrMrsregor 3 жыл бұрын

@@JeepSolid maybe what they call the "throw out bearing" ( i am not positive, just a though )

@sidewaysfishify 2 жыл бұрын

Clutch went out on my Jeep, absolutely no clutch but when I push the pedal hard enough, it rubs something and inches forward. Sounds horrible.

@jacobshields6942 8 ай бұрын

My sign was it went from a slight noise to a god awful squeel over night

@justus9802 3 жыл бұрын

Thanks for all the videos. Good work. Are you changing the seats on the project 92?

@Hawks_Perch_FaW 3 жыл бұрын

I have a 89 wrangler, it’s clutch often gets completely stuck. Like locked out of every gear when on, and when it’s free it releases on the top of the petal. Like almost all the way released, could it just be out of adjustment? Or something else?

@ja4476 Жыл бұрын

thanks, useful video... Wouldn't it be easier to remove the front exhaust pipe to do this job ?

@JeepSolid Жыл бұрын

If it’d come off easy. But sometimes that’s a battle on its own

@ja4476 Жыл бұрын

@@JeepSolid indeed.... !! btw, your vidoes are very appreciated....

@mefistofer 3 жыл бұрын

Dale, would you please elaborate a little on how you used a screwdriver to hold the flywheel? I can't prevent it from turning...

@JeepSolid 3 жыл бұрын

I wedged it on the stud on the back of the engine and the teeth of the flywheel. But if it's giving you trouble, just get a wrench on the front on the engine on the vibration damper. You can stop the crank from turning over by holding that Bolt.

@stuartglenn4407 Жыл бұрын

When reinstalling the flywheel and clutch, did you use the old bolts or get new ones?

@JeepSolid Жыл бұрын

Reused original bolts 👍

@garymarlett7843 2 жыл бұрын

How did the Jeep shift after you installed the south end clutch? I was told they don’t shift smooth.

@JeepSolid 2 жыл бұрын

Works great. No issues.

@ujayet 2 жыл бұрын

Is it possible to replace the clutch without removing the transmission from the jeep?

@JeepSolid 2 жыл бұрын

Yes. It's possible, but it would involve removing the engine instead. The clutch is pinned between the transmission and engine. Only way to get to it is remove one or the other.