Foil Die Cuts - 3 Ways

Рет қаралды 177,725

Күн бұрын

3 ways to do foil die cutting. SUPPLIES ARE LISTED BELOW.
For more info: www.jennifermcguireink.com/?p=...
------SUPPLIES------
(Multiple sources listed for some products. Go to my blog for more links.)
• SSS Hand Lettered Winter Wishes Stamp Set -- goo.gl/k4ZW68
• SSS Many Thanks Stamp Set -- goo.gl/MoekbS
• Paper Smooches Roses Dies -- goo.gl/8jHjY2
• Paper Smooches Roses Dies -- goo.gl/MIWrVK
• Big Shot Die Cutting Machine -- goo.gl/uXKmdC
• Big Shot Die Cutting Machine -- goo.gl/l7qiu5
• Big Shot Die Cutting Machine -- goo.gl/yFDKUs
• Sizzix Magnetic Platform -- goo.gl/F1I2iP
• Sizzix Magnetic Platform -- goo.gl/bqaZdM
• Sizzix Magnetic Platform -- goo.gl/YYwmcm
• Brother Laser Printer -- goo.gl/JgKvii
• Laminator -- goo.gl/9L6PD6
• Laminator -- goo.gl/rBMyEE
• Toner Paper PDF -- goo.gl/sctlbE
• Therm O Web Hot Melt Adhesive Sheets -- goo.gl/jwpQl8
• Therm O Web Deco Foil Pink Melon -- goo.gl/RDWekI
• Therm O Web Deco Foil Pink Melon -- goo.gl/77eVIk
• Therm O Web Deco Foil Lime -- goo.gl/DVwIM7
• Therm O Web Deco Foil Lime -- goo.gl/3BdYpR
• Therm O Web Deco Foil Opal -- goo.gl/aIGurT
• Therm O Web Deco Foil Opal -- goo.gl/qfT7qr
• Hero Arts Black Dye Ink -- goo.gl/mIe5Ll
• Hero Arts Black Dye Ink -- goo.gl/fi1BXq
• VersaMark Ink -- goo.gl/CwuyKL
• VersaMark Ink -- goo.gl/NmVD3L
• WOW Clear Gloss Super Fine Embossing Powder -- goo.gl/l4Kbyn
• Hero Arts Milwaukee Heat Gun -- goo.gl/xjhVWt
• Hero Arts Milwaukee Heat Gun -- goo.gl/AHy6SI
• Hero Arts Milwaukee Heat Gun -- goo.gl/dxBFRF
• Coffee Filters -- goo.gl/uqoQJh
• Fiskars Amplify Scissors -- goo.gl/6CG3Bm
• Fiskars Amplify Scissors -- goo.gl/AR8pMl
• Fiskars Spring-Assist Micro-Tip Titanium Scissors -- goo.gl/bn2c29
• Fiskars Spring-Assist Micro-Tip Titanium Scissors -- goo.gl/4YrQkF
• Ranger Craft Sheet -- goo.gl/zWvXmA
• Ranger Craft Sheet -- goo.gl/eCS5wd
• Ranger Craft Sheet -- goo.gl/LtEtWd
• Tim Holtz Craft Knife -- goo.gl/iRPIf1
• Tim Holtz Craft Knife -- goo.gl/5tQBF9
• Tim Holtz Craft Knife -- goo.gl/s4BYR5
• Fiskars Acrylic Block Set -- goo.gl/nctzyK
• Fiskars Acrylic Block Set -- goo.gl/V2MmEi
• Hero Arts Small Pearls -- goo.gl/N7JVax
• Hero Arts Small Pearls -- goo.gl/QyK2Ps
• Hero Arts Medium Pearls -- goo.gl/LteYQV
• Hero Arts Medium Pearls -- goo.gl/lw4nA0
• White Fun Foam -- goo.gl/UTpjHy
• White Fun Foam -- goo.gl/EeXayc
• Neenah White Cardstock (250 Sheets) -- goo.gl/o4rfLJ
• Neenah White Cardstock (250 Sheets) -- goo.gl/cChev3
• Neenah White Cardstock (25 Sheets) -- goo.gl/fjd1QI
• Neenah White Cardstock (25 Sheets) -- goo.gl/XLsux6
• Kirkland Signature Non Stick Parchment Paper -- goo.gl/znWm6O
• Tombow Stamp Runner and Refill -- goo.gl/OX81Vl
• Tombow Stamp Runner and Refill -- goo.gl/PtvwuT
• Tombow Stamp Runner and Refill -- goo.gl/DlqJd4
((( an InLinkz product list: www.inlinkz.com/?refId=2555 )))
------DISCLOSURE------
Affiliate links are used. For affiliate and product disclosure, visit jmink.me/jmdisclosure
The information provided in this video is based on my own personal experience. I am not an expert nor do I work for these companies nor did they ask me to promote these products. I just am sharing what I love. :)
------FIND ME------
• Blog: www.jennifermcguireink.com/
• Twitter: / jenmcguireink
• Facebook: jmink.me/N4c7tI
• Pinterest: / jenmcguireink
• Instagram: / jennifermcguireink

Пікірлер: 156

@Kizzkaah 9 ай бұрын

Thank you so much for this video! I was so desperate to find a glue and not buy something that doesn't stick. Since I don't live in America and they don't ship many stuff like these to where I live, I was sad. Seeing this video, I have a way now to make this work! Thank you again

@joannlienert9259 7 жыл бұрын

A tip if you don't mind...I take a black sheet of cardstock and 10 sheets of white cardstock with me to Office Max and copy the black cardstock onto the white cardstock! That way I can use dies, punches, and die cutting machines!

@nicholeh9180 4 жыл бұрын

I just wanted to tell you thank you so, so, so much!!!! I don't own a hot foil machine, nor do I want to buy one because then I have to buy hot foil dies. I don't even own a laser printer. I had your black page download printed at OfficeMax, rushed home to try it out and I'm absolutely in love! It works beautifully! I will be buying a laser printer (I can justify it easier since it will allow me to foil using my existing dies), if you have a new laser printer suggestion as of 2020 (since this is an older video), I'd be ever so grateful! Thanks again!!!! You're absolutely amazing!!!!!

@DonnaMSchmid 9 жыл бұрын

I love the foil look, too! Thanks for showing us some additional methods of using it!!!

@KalynKepner 9 жыл бұрын

Love these foiling techniques! Thanks for sharing, Jennifer!

@jeannethomas6965 9 жыл бұрын

They are absolutely stunning. Thank you for all your inspiration. I love watching your videos.

@tammywhitley4657 9 жыл бұрын

I just love all the options you are teaching us using the foiling technique

@susanknauber2245 9 жыл бұрын

Loved this demo and am anxious to start foil embossing again. I did this years ago when I first got in to stamping and that is 18 years now.

@elizabethvallely4044 7 жыл бұрын

Another great video Jennifer with very helpful informations and tips! Thank you for Sharing!! God Bless Liz x

@marapatricia3869 9 жыл бұрын

All of a sudden I need a Laminator ASAP ! Love this ! Can't wait to try

@Maureen97Designs 9 жыл бұрын

Just brilliant!! Love the idea of printing out the giant square of toner - thanks so much for these great ideas!!

@j9cardstock354 9 жыл бұрын

Lovely card(s). I just bought a Big Sissix in January and i love that Papaer Smooches rose die. Gotta add that to the wish list!

@heathermueller5171 9 жыл бұрын

Love the cards. I have started experimenting with the foils too. Great ideas. Thanks.

@jamiemagrichJamiescrafttable 9 жыл бұрын

You so much for teaching me how to use the foiling. I had some given to me several years ago but never had good luck with it until now thank you so much.

@bijouxw1014 9 жыл бұрын

Great help. Thank you for that added tip of two colors, I wondered if you would have to run it through twice. Love your videos. Always so helpful.

@lynettedelianides8069 8 жыл бұрын

Thank you for sharing! I bought the laminator - you always inspire me. I tell everyone about your blog!!

@pattiepan 9 жыл бұрын

Jennifer what a great tutorial about foil and the different ways to apply it. Like you I found out that my foil wasn't doing a clean enough job because my laminator just wasn't hot enough so like you I let my machine warm up for about 20 / 25 minutes and it was really nice and warm. I put my pieces through and they laminated beautifully. what a joy to see the beauty of it. Mine is a Two Cows laminator that I got at Costco's and it was just about $18. I can say it works fine as long as you give it time to really warm up properly. Then you can laminate in peace. I didn't want to make the big investment of a fancy machine as I didn't know how I would like working with foil. I love it. As long as my machine holds up .... I'm going to keep using it until it dies on me. lol. Then maybe I'll have the funds for the fancy ones. Thanks Jennifer another great video. pat

@patsyoberg3113 2 жыл бұрын

I love the foiling affect you can get on a card. I also appreciated seeing how to do foiling different ways.

@Katerina-vm2ok 4 жыл бұрын

Wonderful video...thanks for these tips! I’ve never foiled but I just got my laminator and I am waiting for my foil to come in the mail...this video really helps!

@charsbabushka 9 жыл бұрын

I can't thank you enough for all of your foil videos. Now, that I have all the supplies, I just need to start playing. I love the look of foil.

@ladyj.crafty2016 7 жыл бұрын

Jennifer, that card was just beautiful. Absolutely beautiful . I can't wait to try it with my Christmas dies. Thanks so much. Have a blessed day.

@emmawalters3581 9 жыл бұрын

I'm soooooooo excited, after watching this I had to order some deco foil and give this a whirl. I'm off to stalk the postman now....TFS Emma x

@tammyparker7718 9 жыл бұрын

Living it!!!! Was just at michael's yesterday and the deco foil is on sale for $1.99!!! Grabbed a ton! Happy crafting!!

@sprosews 9 жыл бұрын

Hi Jennifer. After discovering you and your fabulous videos, I am back into stamping in a big way and your foiling videos really got me hooked. I did discover though that not all laser printers use toner; I printed out your toner .pdf (thank you) and put it through the laminator many times with no success. Well, I thought to myself, maybe the laminator wasn't working, so I tried it and it worked just fine. I was so disappointed until I thought to ask my husband, who told me ours has some other kind of ink - I thought this might help if others are thinking of getting a laser printer. In other news, my Joann's has the Minc foil and accessories on clearance at half off!! I ordered a different, cheap laser printer which comes tomorrow so I'm very excited. Thanks for your inspiring videos!!

@irmern 7 жыл бұрын

Thanks for sharing so many options. I've tried them all plus Tim Holtz sticky embossing powder. They all work but I personally love the toner method. I find it leaves a much smoother service.

@kiminalaska9363 2 жыл бұрын

I watched this a long time ago so I had forgotten these techniques. Thank you for creating videos for us.

@willysmom1 9 жыл бұрын

Finding your channel was the best thing I've done with you tube.

@marydecker5445 9 жыл бұрын

You are such a great teacher. I am amazed at how articulate you are while you are showing us what to do. Such wonderful multitasking! Thanks for the work you do to help us improve.

@evagotay9052 7 жыл бұрын

HI Jennifer I just started watching craft videos on KZfaq. I am so glade that I found You Tube craft, because I found your website. I really like most of your videos. You describe everything so clear and precises. Thank you Now I will start use my laminator again. I will definitely be watching your videos more often.

@charsbabushka 9 жыл бұрын

I want to share a tip with you too, Jennifer. I bought some fuseable webbing at Joann's. The kind that is used in sewing. I bought a light weight webbing. I cut out one of my dies with it and used it in my laminator. It worked beautifully. You could also use it with an iron. Just wanted to share.

@BRITTnCaboodles 5 жыл бұрын

Wow, Joyce B !!! What an Awesome idea !!!!! Wondering if the webbing could be used with intricate paper die cuts ??? I’ll be trying this asap 😀 Thank you so very much for your super idea 😃😃😃

@sharon94503 3 жыл бұрын

Say what? Genius.

@fenixdesigns 3 жыл бұрын

I was actually wondering if fuesable web would work while watching the video. So I'm glad to read that you've tried it and had success... thanks for sharing your experience! :)

@charsbabushka 3 жыл бұрын

@@fenixdesigns I have not done any foiling for quite some time now. I need to find my fuseable webbing and play some more.

@LJHLU Жыл бұрын

I was wondering for my Christmas cards I want to do foiling. If I printed the message for the inside of card with laser print would that work with foil? Plus how long will the laser last for me to run the foil on it. Say I printed 20 laser jet but couldn’t get to them for a couple days will the laser print still work? F so what type of paper do you use with a laser jet? I think mine only allows typing paper.

@BiteSizedCrafter 9 жыл бұрын

These are beautiful. I have to try these techniques some time.

@kimmc3055 9 жыл бұрын

Love the foil look! Can't wait to give it a try with some of my Sentiment stamps.

@debbiemcanany3074 6 жыл бұрын

This is so beautiful and awesome. Love it love it love it!

@colleenhowell9564 9 жыл бұрын

Love your videos and I also am into foil at this time, it is so pretty on anything

@sharonfrench1087 8 жыл бұрын

Beautiful cards with the foiled roses. Now I'm going to have to save for a laminator too.

@PerfectlyImperfectJunkJournals 3 жыл бұрын

Thank you for sharing these techniques. Very pretty!

@vessyned 9 жыл бұрын

I love the foiling tutorials. Would love to see more:D

@kerritareta2701 3 жыл бұрын

Jennifer, I am watching this video 5 years after you made it! It's now 2020 and I am just discovering the foil technique. Thank you for this wonderful video explaining how it's done. Of course, I've purchased the laminator you've suggested from Amazon and a variety of colourful foils. Can't wait to use some beautiful red foiled titles on my holiday cards this year!

@rebeccawagner-campbell2161 4 жыл бұрын

Hello Ms McGuire, I am new to card making and I enjoy most of your videos. The most difficult thing about this new hobby is the expense. I want to try every technique and keep buying more and more supplies. And now I’m in love with foiling. Thank you for showing how to create these beautiful cards.

@yvonnewarbey6328 6 жыл бұрын

Gosh Jennifer I'm new to Card Making so I just love your videos which are teaching me a lot. Only trouble is I'm spending such a lot of time watching your videos. :-) :-) :-) Just love the way you explain everything. Thank you.

@calyperson21 9 жыл бұрын

you are sooo clever, Jennifer! Thank you!

@barbaraharrold5361 9 жыл бұрын

Wow thats awesome:)) I love that you showed different ways of getting the same effect:) I really love the flower with foil:))

@MRorizs2 8 жыл бұрын

I just discovered your channel today and find it's amazing. The foil techniques are relly great for many different works, I love it! I dont know if you're gonna read this comment, since this video is old, but if it helps, what makes the foil stick to the laser toner is that the toner they use in laser printers is based on wax, the laser just heats a wax powder and melts it making it stick to the paper, so when you use your foil technique with the laminator, the heat melts the wax again and makes the foil stick to it :) I hope that bit of knowledge can lead to other techniques as well :)

@gamegirlazd3608 9 жыл бұрын

So BEAUTIFUL!!!

@sherlockhoka 9 жыл бұрын

Beautiful job. Love the opal foil.

@kelleyorion9721 6 жыл бұрын

Oh my this just PERFECT!!!!! THANK YOU SO MUCH

@kathyroehrer93 3 жыл бұрын

❤️Wow!! Thank you so much for this video!! I'm going to have to try these new techniques!! 😘🙏🏻

@Bitsandpeices 7 жыл бұрын

nice work jen thanks for sharing ive watched many videos good job

@janellekm 3 жыл бұрын

Thanks so much for this video, it has inspire me to use foil. Thanks for sharing 😊

@stellabyrd6014 7 жыл бұрын

Wish I could do that but it looks complicated. Thanks for sharing. It is really beautiful.

@LindaLap 9 жыл бұрын

Wonderful Jennifer. Thank you!

@01poppyblue 9 жыл бұрын

You're the best, thanks so so much for this video 😃

@lorimcgarrity2146 9 жыл бұрын

Perfect timing since i just got some of this Deco Foil on clearance this weekend. I need to go back to Michaels tomorrow and see if they still have any left. I used it with the double stick adhesive and it did awesome. Thanks for the idea of using with the pretty open dies. I have some pretty florals like that that I will try. Great job as usual jennifer. Thanks.

@jennifermcguireink 9 жыл бұрын

Lori McGarrity be careful. the michaels packs only had one or two sheets of foil. online you can get 6 sheets for a little more.

@poppysmum9715 Жыл бұрын

Hi there!!! Watching this vid for the first time in 2022!!! Great ideas x

@jennifermcguireink Жыл бұрын

Glad it was helpful!

@CraftieChelseaMarie 9 жыл бұрын

love all this foil! I'd be curious to see something with the foil after used? Kind of like the "negative". it might be pretty having the image in the foil instead of the foil in the image if that makes sense? Just thought the squares piece of foil after peepling it off the rose was pretty :)

@Yvonne03021 9 жыл бұрын

Great tutorial. Thank you!!

@JesusFirstForever 6 жыл бұрын

Jennifer all your information was so helpful, love n prayers Scherree

@eileenschuller5309 7 жыл бұрын

Is there anything you don't know? You are so amazing and so generous. Thank you

@sabrinabradley5010 8 жыл бұрын

Thank you, so ready to do this technique. You are so generous with your time and talent. Thank you for sharing. Your videos are very inspirational for me. May you continue to be so very blessed.

@connieadams5581 5 жыл бұрын

SaBrina Bradley n

@cal8007 8 жыл бұрын

thanks so much for this video - very helpful!

@candibrinson5069 5 жыл бұрын

Die cutting shaded pink vellum to go behind the rose would look fantastic !

@bethmerkle1304 6 жыл бұрын

Thanks for the great tips!

@WriteSoul 9 жыл бұрын

wow that is amazing, thank you for sharing these techniques x niki

@consuelomorales7227 9 жыл бұрын

Great idea. I have a laser yet and this is very nifty. Thanks...love your videos.

9 жыл бұрын

Woww I love !

@cherylguy3034 8 жыл бұрын

Jennifer, love your videos! What do you think of the toner sheets they sell now? They have regular and adhesive backed. Also made by Deco Foil.

@GracieViola 8 жыл бұрын

I love your channel! I really want to try this foiling technique with the laminator for my wedding invitations. I'm planning on getting the same brand of machine. Do you know if i can double stack the paper & foil when it goes through the laminator? Also can post-it tape go through the machine (to block off areas i dont want foiled) without damaging the card?

@witchduck1 8 жыл бұрын

Thanks, that was great. I have a Christmas tree that I am going to try.

@terrie1226 9 жыл бұрын

Just beautiful.... I wish I had a laminator....tfs

@salleep.9818 9 жыл бұрын

So smart! Thanks!

@Aralynn2003 7 жыл бұрын

Very nice! Thank you

@mamacrafts6211 9 жыл бұрын

Brilliant!

@gaynorsoutherton2698 5 жыл бұрын

So clever thank you x

@whimsicalexpressions 9 жыл бұрын

I need a laminator. :D LOVE your nail color too!!

@tegnurina 9 жыл бұрын

I loved! I want to probe it!

@margaretjohnson8442 9 жыл бұрын

thanks, what a great game changer

@juliannwilliams7144 6 жыл бұрын

Hello Jennifer. Can you tell me what thickness fun foam you prefer to use. I didn't realise how many different thicknesses there were. I just love your tutorials and you are so pleasant to listen to. I could watch and listen to you all day. Thank you for all your inspiration. Juliann (Australia)

@janetmuir6011 7 жыл бұрын

Wonderful

@CardsbyMaaike 9 жыл бұрын

foiling rules! shame thermo web is hard to get in the netherlands, but i have the wow foils and love them too, your idea of die cutting is of course absolutely fabulous as usual!

@Iris1512 9 жыл бұрын

Maaike Uijthoven Ik heb het gister bij srobby.nl besteld en vandaag al binnen! Geloof dat ze niet alle kleuren hebben.

@CardsbyMaaike 9 жыл бұрын

Iris1512 hoi, ik heb bij scrobby alleen heidi swapp gezien tot nu toe, zal eens een blik werpen, bedankt

@Nittyb123 4 жыл бұрын

Very nice video, Thank so much for the alternative method, as I have a injet printer. 1 question, do you think cold foil will work for the embossed paper/ laminator tecnique, or only heat activated foil.

@janarnold7241 8 жыл бұрын

Awesome!

@CraftyKazzaH 9 жыл бұрын

love them all Jennifer :o)

@mynashka 9 жыл бұрын

brilliant

@annielucky7352 9 жыл бұрын

wow... super pretty... now, I NEED a laminator... you just created me another need Jennifer :-p

@colleenpepper181 9 жыл бұрын

So beautiful! I wonder if that would work with the sticky embossing powder.

@lemoniea 9 жыл бұрын

Colleen Pepper Tim Holtz has a youtube on how to use sticky embossing powder.

@lasinmt106 2 жыл бұрын

I'm off to watch your No heat foil technique next up. I'm searching for methods to add foil to faux leathers and vinyls without worry about melting the plastic materials of course. So finding your tutorials today very helpful and providing ideas that might work well too. (I also have a few glimmer heat embossing dies so of course they require HEAT. A full set of Zodiac night sky star shapes in these heat embossing dies. SO of course I want to use vinyl because I am making personalized itty note books for an office of 5 people who for fun I thought it would be nice to do their Zodiac Signs on their favorite colors but in vinyl so the covers hold up better than cardstock. There are several difficulties with this and one is just being able to squeeze the vinyl thickness into a paper punch and then not melting vinyl via any form of heat, iron, laminator or a specialized glimmer like item. I think I'll try to laminate anyway as I have 3 laminators all over 20 years old but one is what was called a BIG Mouth which meant it accepted a foam board about 1/8 maybe a big thicker I don't recall but I still have some of the materials to check it out. Any way this laminator if needed might help. Another thing I was thinking in both this video and your 5 favorite ways to use foil was when using the thin double stick materials you could actually run it through the embossing machine to add more pressure than maybe using the bone smoother would accomplish. But such great shares on different techniques. I'm off to play. I also have heat a pen that heats up to free hand write with it. Again worry if it's too hot for the vinyls. I see on line where people have bought A5 and A6 note journal books made of vinyl and some foil with heat well others do not. But I have a few more ideas to use faux leathers with foiling and just hope it works. Thanks again for your shares.

@lucye.2155 9 жыл бұрын

Great video! I don't have a laminator and don't plan on buying one. Do you think that using an iron as the heat source could produce the same or similar results?

@kimberlywalker1015 4 жыл бұрын

Very pretty.

@bhandy1000 9 жыл бұрын

LOVELY! Now I'm thinking I need some foil.......you are such an enabler! :-)

@MyLifeMineOwn 8 жыл бұрын

thank you for sharing this :)

@debbiemckinlay9503 Жыл бұрын

Wow!

@melvintaylor1601 5 жыл бұрын

Will you be showing the WeR foil Quill

@jennifermcguireink 9 жыл бұрын

@blaizC- i have not had much luck with that product

@kevinworth3311 4 жыл бұрын

skip the embossing powder part, it works with just vesamark!, and you don't need a laminator, just a roller.

@suefoss5676 9 жыл бұрын

With the pearl foil would you ink stick to it if you were to sponge over it?

@pikeandike 9 жыл бұрын

Nice card, Jennifer...I am surprised you didn't use your MISTI! ;-)

@FiendishSpirit 5 жыл бұрын

will the foil stick with any color printed with a laser printer or just black color ?

@sonjaedwards9039 9 жыл бұрын

What adhesive did you use to attache the foiled die cut to your card?

@dawnyoung9231 11 ай бұрын

I’m sort of new to card making and very new to foiling. What poundage card stock do I use when through the laser printer?

@dawnthomas2475 7 жыл бұрын

Does it have to be cardstock that the toner is printed on? I was so excited that I did it on regular paper and I don't think it working right. lol. Can I just glue the regular sheets to cardstock or should I just start over?