SAME LOL

I'm laughing out loud 🤣 😂..nice

Jesus. Just the cost of the machinery, notably the press machine, the tools, etc. Yeah, no thanks. Repair shop for me as well! Nuh-uh!

🤣🤣🤣

The repair shop doesnt do this, just so you know. Too much risk of damage to the LCD. The glass is glued to the LCD. About 99 of 100 use a small heat source to remove the back and disassemble it and replace the glass and LCD digitizer as a unit. THAT is actually do-able by a tech savy person. I have replaced internal components like charging jacks and batteries that way myself. There are multiple videos that show you how on KZfaq. Again tho. Even that, I wouldn't recommend to someone who maybe has never worked with electronic components before

Yeah, I'm wondering too

The equipment used is thousands

❤

Yes, it's the same display

denatured alcohol

250⁰C will break the battery, but not 110 😉 I made hundrets of phones and never get problems.

Perhaps the UV curing, laminating, and vacuuming processes for the lcd can damage the motherboard.

@@joebanks3698 I thought it would be mentioned in video. ??? I have a lot of MB experience. No knowledge of that sensitivity. No experience where the MB was more sensitive than LCD. It's usually the weak link.

@Joe Banks Avoid all that headache. Do like the average repair shop does like the Asurion insurance repair tech does when they repair your phone in your vehicle in your dooryard. They replace the glass, lcd/digitizer and the frame that holds them as a unit. Back is removed from the phone with heat gun, battery removed and internal parts, including that frame, new frame assembly put in along with all parts and back is glued back on with new adhesive strips. This method is just to show the high tech method of doing just the glass. The HEAVY majority of shops do not have this equipment nor do they want it. Mall kiosks and little repair shops there most certainly never do this. I tried to find a shop in the southeast PA area once to do this and the only one that expressed the ability was a small shop that said their quite young repair guy said he could do it. I did not trust him with the job. I kind of knew the equipment that would be needed and the process as I was told that some places that have it use a freezing process to make the UV glue brittle and there was next to no change he had it.

​@Vance Ogden isn't the digitizer really expensive to replace as opposed to replacing the glass, which is only a few quid?

Thanks 😁

13$ WOT ?? IT COST 340 TND here approx lil more then 100$ !!

Cost is 150$ 😁 please write on facebook

Ten na dole używamy do tabletów, mały lepszy bo szybciej się napełnia 😃 Dzięki bardzo, pozdrawiam również! Pewnie miałeś na myśli loca- pomyślę może coś wrzucę

@@JerryMobilePL sorry tak loca :)

​@@JerryMobilePL HOLA DESDE MEX, HAY OTRO LIQUIDO TRANSPARENTE QUE ANUNCIEN EN PINTEREST POR $25 DLS QUE REPARA EL VIDRIO AL INSTANTE SERA KOLA LOCA O ES OTRO GRACIASSS

it is B-7000 glue :)

@@JerryMobilePL any reason why you use the b-7000 instead of replacement pre-cut adhesive?

Yes it's IPA alcohol

Of course works

Hej, zależy czy wysyłka i jak silne sa uszkodzenia. Proszę napisać na fb 😉

We are in Poland :) plesse message on fb for details.

I put it into the vacuum laminator machine

@@JerryMobilePL why cant u just put it in debubble machine? Whats purpose of 1st machine?

Please message on facebook I will help 😁

@@JerryMobilePL 😎

Ja dabei kommt ein Einfuhrumsatzsteuer mit 19% auf dich zu je nachdem wie hoch der eigentliche Preis ist.

Wouldn't help 😔

@@JerryMobilePL Didn't think so, I just wanted a proffesional opinion over my families. Thank you!

Yes, but You will need new LCD frame

Pen też się nada jednak ja preferuję ostże. Inframe może jeszcze zrobię 😉

SOCA Sheet has best life compared to LOCA Glue

Koszt to 6 stówek 😉 jak coś zapraszam na Facebooka

@@JerryMobilePL 😥

No 🫤 the shape of glass will be different

yea you could just replace the glass, but to make sure the front camera still works without any blurr, you should take it out before glueing the new glass

Address send kriye

Hello! Maybe some liquid left inside the phone? Disassemble it again, heat for 90-100⁰C for 30min and check again. Disconnect the battery when heating

@@JerryMobilePL thank you . I'll give it a try

@@JerryMobilePL thanks for you reply . i managed to turn it on only if charger is plugged in, it works for a bit then it shuts down display again , i can hear notifications still ringing. very weird problem

At 8:11 you can see all the crap on the left side of the screen and u Scrub the right side but don't touch the left then u put the screen together with visible glove/finger prints and somehow it looks brand new after I don't get it

Or was that scratches from the wire or something. I just don't get it I must be wrong, great work but still I don't get it.

without machine You can do it with LOCA glue, please check on my channel- I have S10 video home solution. You can try like this

@@JerryMobilePL I was wondering if I could use loca glue to repair my screen on samsung galaxy s21 ultra so it won't damage it?

@@JerryMobilePL I know u can use loca glue on older glaxys but I was curious about the s21 ultra

@@zmillie2364 You can use loca glue on EVERY oled screen, but will be more waves etc. But will work perfectly

Sorry but I didn't checked it. I'm not sure 😃

Я отделяют от рамы в холодильнике