BEST Galaxy S5 Glass Only Screen Repair Video COMPLETE
Рет қаралды 2,156,755
10 жыл бұрынGet your tools on Amazon HERE: amzn.to/2d1HaGr
'Just the glass' replacement part (White): bit.ly/2ddgDn6
'Just the glass' replacement part (Black): bit.ly/2dIglW1
More expensive Glass + LCD (Black): bit.ly/2dddRym
More expensive Glass + LCD (White): bit.ly/2drauqq
Double Sided Tape: www.amazon.com/...
UV Glue kit (5ml of glue): www.amazon.com/...
If you plan on doing more than one glass repair, it might be worth your time to invest in a higher end UV light. This is the one I use: www.amazon.com/...
This is the heat gun I use: www.amazon.com/...
This is the Laser Temp Sensor: www.amazon.com/...
LET ME KNOW IF ANY OF THOSE LINKS STOP WORKING. Or if you need any other replacement parts.
----------------------------- If I helped you out today, you can return the favor by following me! -----------------------------
Instagram: / zacksjerryrig
Facebook: / jerryrigeverything
Twitter: / zacksjerryrig
Pinterest: / zacksjerryrig
GooglePlus: plus.google.co...
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This video will teach you everything you need to know about replacing JUST THE GLASS on your Galaxy S5 Smartphone. If your glass screen is cracked, shattered, or completely obliterated like the one in the video, you can fix it yourself for super cheap. I do recommend watching the video entirely all the way through to make sure it is something you want to do with your phone. It is not an easy repair, and the success rate is low.
You do not need to buy ALL of the parts listed above, just the ones you need for your particular repair. The LOCA glue i used in this video was a 50ml bottle, the glue that comes with the kit I linked is a 5ml bottle. So distribute it evenly on the screen.
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
@karlisozols5986 5 жыл бұрын
I'm not sure why this is in my recommended videos and why I'm watching this, but I'm enjoying every minute of it...
@kynsefkicks4207 5 жыл бұрын
Kārlis Ozols bahahaha exact same
@Wtfukker 5 жыл бұрын
" I'm enjoying every minute of it."
@strangeperson700 4 жыл бұрын
Consider this as a career. :)
@rawlamb5197 8 жыл бұрын
If the glass is particularly shattered, try putting strips of tape across it. While you take it off, it'll stay together better with less tiny glass shards around.
@nzj3vx 5 жыл бұрын
you wont be able to pull the glass away though so more risk of breaking the lcd
@zacharywhitehead1146 8 жыл бұрын
Your detail is amazing the whole process of your video was awesome to Learn about the screen repair. the way you sped up the process and commentaried it slowly and clearly was perfect. even with small extra side notes the commentary did not cover. dude. your awesome keep up what your doing!!!
@JerryRigEverything 8 жыл бұрын
Thank you for commenting! Good to know what you enjoyed and learned from the video.
@queenadri4730 7 жыл бұрын
can I send you my phone and you fix mine
@MrsHChrist 9 жыл бұрын
Thank-you for being so well thought out in your videos. I lost count of how many tutorials I watched before attempting my first S4 glass only replacement. I have now successfully completed this repair three times now, and will be replacing the glass on an S5. With the knowledge I have gained from your tutorials, and photos of my finished products, I have been blessed with enough extra income to not be stressed out over the holiday season. I didn't have any spare playing cards around, but I did use an envelope as a wire/card hybrid. Thank-you so much for your how to's as well as your common mistakes video. :-)
@JerryRigEverything 9 жыл бұрын
Marcellina No problem! I'll have the iphone 6 'Just the glass' video posted later tonight (or tomorrow morning). You'll probably find it interesting to watch. Especially since you've done a few already.
@levitaylor5128 5 жыл бұрын
Watching on an s10+ and amazed how recently removable backs were a thing
@mttgauss 5 жыл бұрын
I used to remove the battery if it freeze or the cellphone crash or just in a hurry
@evaldaskowka 5 жыл бұрын
non removable batteries suck again its for profit so typical user cant just replace the battery
@pareeks 7 жыл бұрын
this in one of the best replacement tutorial I have ever seen. It has excellent quality of sound with detailed level of information as to what can go wrong and avoid that beforehand. Good work and keep going!
@DaddyEGamer 5 жыл бұрын
I Dont Know Why But In Watching This In 2019 and it Looks Like Its A New 2019 Video except for the video quality
@tilewix3756 5 жыл бұрын
I do too
@Kamikaze-xu1nz 5 жыл бұрын
Hey Bro was also watching it just a couple of minutes
@ivycrew8 8 жыл бұрын
this video was very specific. now, I don't feel I'm paying too much for my phone repair.
@hibiscusflower5911 8 жыл бұрын
+barbara ivy lol true
@Shadow77999 6 жыл бұрын
howd it go
@EmilyBrowneyes 9 жыл бұрын
You are the Bob Ross of phone repair. This was great, thank you!
@AndrewMD1104 9 жыл бұрын
Hi I enjoyed your video, help quite a bit. One good tip is to use packageing tape on the screen just before you start removing the screen. All the small pieces of glass will stick to the packaging tape, I have tried this several times with great success.
@pebblesmcfadden5946 5 жыл бұрын
What happens to the tape when it is heated?
@user-cq5sn5hq4m 5 жыл бұрын
KZfaq reminds us that once Jerry was less artistic & more realistic
@imrandombtwnameisalexnewme6237 5 жыл бұрын
Ян Н. S i thought his name was zack
@TheXentios 4 жыл бұрын
I like this jerry more.
@epartsacc 8 жыл бұрын
I do repairs myself and I just have to say....This is an amazing video man! Your level of detail is outstanding!
@JerryRigEverything 8 жыл бұрын
+Electronic Parts Thanks for watching! Glad you enjoyed it.
@longjohn526 7 жыл бұрын
Finally someone gives me a real temperature (Heat until you can just barely touch it is not proper directions) Now I can just warm up the bed to my 3D printer to around 95-97 C ..... It beats the heck out of using a heatgun. My only complaint is using an IR temp gun doesn't work very well on reflective or glass surfaces. You are actually going to be 10-20C warmer than you are actually reading. I found this out testing glass to print on and then using a good thermocouple Kapton taped to the glass and comparing that with my IR temp gun. The same thing goes for shiny aluminum heatsinks, the IR reading is always going to be a tad low. Not a real big deal but something to be aware of especially around heat sensitive things like AMOLED screens I should make a 'click bait' video "How I used my 3D printer to fix my Samsung S5" ....... Sure it's mostly BS but I bet it would get a ton of hits ...... and a lively comments section
@JerryRigEverything 7 жыл бұрын
I dont think thats clickbait at all. Its a pretty accurate description of what you are doing... Do it! I'm sure it will help some people.
@WL2K 7 жыл бұрын
And will screw some people too, meaning that if you hadnt posted this video at all, just as many people would have a working phone as without it. At least I could use my phone before watching this, but now i can use it for NOTHING. Im fucked. I cant get calls. Or texts. Fuck my career I guess. Remind us 20 times of 206 degrees, blah blah, 15 min of watching you slide a card around, but never taking the time to describe actually WHAT FUCKING PARTS you are sliding between. 'just carefully slide it in there' my ass.. I watched this 10 times, and NEVER ONCE do you say to get between the digitizer and the glass, and keep the DIGITIZER LAYER STUCK TO THE LCD LAYER, AND PRY THEM BOTH OF OF THE GLASS. What is the point of a video if you dont explain the things we need to know!?!?!? I could have wrecked my phone without this video, thank you very much. If anyone reading wants to know how to NOT WRECK YOUR FUCKING PHONE, contact me before attempting these instructions
@mrgregweber 7 жыл бұрын
There is a hacking club (not cracking more like coding and jerry rigging hardware) in town where I live with 3d printers. They would all get a kick and probably use the 3d printers for it. I wasn't aware that was possible. If you kid, ah you got me, nice.
@r.c.collins6513 8 жыл бұрын
Ok. I've ordered the kit. Now i just need a set of scrubs, scalpel, and an anesthesiologist (for me) in case it all goes wrong.
@enzokull 8 жыл бұрын
have you succesfully replaced it or it went wrong?
@cerenbasoglu6237 8 жыл бұрын
did you do it? ı really need to know
@TheModernMan92 8 жыл бұрын
well did it blow up
@DaRealNiqqas 8 жыл бұрын
I think hes joking you idiots
@ToninFightsEntropy 7 жыл бұрын
Surely he's serious..
@joaovictorcampos9392 6 жыл бұрын
Great video! Very specific, clear and concise. I did the glass repair and got an almost perfect result (except by some tiny bubbles in the corner due to lack of enough glue). My phone is working perfectly now and it cost me almost nothing.
@joaovictorcampos9392 6 жыл бұрын
Some tips if you try this for the first time: If you don't have a heating plate, you can use an upside down clothes iron (on the lowest setting) to gently heat up the glass. More glue is more better. It's easier to clean up the excess than to remove the whole screen from the glass because the glue didn't reach the corners properly. If you dont have any specific UV lights, you can use a standard fluorescent black light bulb and it works just as well.
@conflictingpro1 9 жыл бұрын
Your voice is so clear and easy to understand because of this. Thank you. You don't forget any important info and I do not have to watch 4 videos. I appreciate you. I subscribed
@remybutorin2823 8 жыл бұрын
Really is one of the best ones I've seen so far!!!
@farooqguthmi6603 7 жыл бұрын
nice good
@jasonfredrich7392 8 жыл бұрын
How many ml's are suggested to glue the glass screen back onto the lcd screen? Also FYI for everyone else, I had my Galaxy s5 active cracked pretty bad and used the advice from this video to heat up my phone, with a heat gun, to the point I could only touch for a second and then started pealing off the glass without removing the whole screen from the casing. This worked just as good too and I didnt have to worry about breaking or disconnecting the circuitry to the phone. Cards worked amazing BTW! Thanks for the help. JUST TAKE YOUR TIME, my first phone fix and it took me roughly 3-4 hours to the point where all the glue is rubbed off the phone and ready for the glass to be mounted.
@jasonfredrich7392 8 жыл бұрын
Yep that's correct, just be careful not to over heat and still remove the other parts, battery etc. Be careful with amount of glue applied at the end too since it's very difficult to clean up if you don't remove your lcd. But mine works perfectly. Good luck!
@PB-cn1uh 9 жыл бұрын
I used your instructions on replacing the charger cover for the Galaxy S5. Once you have the part (Ebay) and the smallest screwdriver available (+ or -) it's as easy as you showed it. My entire portion under the screw didn't come off and I was scared of losing the rubber below but it raised up enough to replace the cover. Good instructions. Thanks so much. God Bless
@mrequi1 7 жыл бұрын
Great video. closeups, angles, and you're an excellent instructor. Best of these I've seen. I mostly mod and develop Android but do some repairs. Though I learned more here than any glass replacement video before. I would caution people that this is a difficult repair and the reason I don't do screens. Curious what you charge for glass replacement. I couldn't get it to pay vs the time spent and risk. I haven't done many though
@Paul-ym9lr 7 жыл бұрын
I have a very flat electric skillet that can reach those temparatures can I use it? Also if so how long do I keep it there?
@ReassuringSmile 9 жыл бұрын
I've tried this and cracked the LCD had to buy the entire screen. this is not easy to do
@Snowdogkh 6 жыл бұрын
vickimon after watching this video I'm not even going to attempt it. I'm just going to buy the LCD and the glass. That looks pretty doable! Still cheaper than a new phone!
@mclasky431 6 жыл бұрын
oled not lcd
@240sxxxvids 9 жыл бұрын
One of the best screen replacement videos I've seen! Thanks!!!
@AlanCorona 9 жыл бұрын
Zack your playing card method is the best I've seen besides the metal thread. Great jerry rig.
@JerryRigEverything 9 жыл бұрын
Alan Corona Thanks! It works out pretty well for me.
@coldspring22 9 жыл бұрын
Looks a lot tougher than Galaxy S3 or S4 glass replacement. Not sure if it's intentional, but seems like manufacturers are making glass only replacement more and more difficult to pull off.
@Mateus01234 8 жыл бұрын
oled... oled... OLED!
@aman2926 3 жыл бұрын
No
@johnatangarayceballos4366 9 жыл бұрын
Jerry you have very good skills and patience, this repair its too dificult to make because the lcd its to thin.... im amazed!!!! Congrats I wish learn something from you. Greetings from Colombia.
@JerryRigEverything 9 жыл бұрын
Johnatan Garay Ceballos Thanks for watching my video! I am glad you enjoyed it.
@yahyaahsan4265 6 жыл бұрын
Jerry your voice is amazingly soothing. I can watch your videos as ASMR for sure.
@ALBERTBOG10 8 жыл бұрын
Tape the glass so the glass shards stay together.
@maclloyd2 8 жыл бұрын
+ALBERTBOG10 What type of tape works best for you?
@SpaceDoggo. 5 жыл бұрын
FLEX SEAL
@tarrahrogers5319 7 жыл бұрын
can you use a blow dryer instead of a heating plate or heat gun
@jimthomas5424 7 жыл бұрын
206 degrees. A hair dryer won't cut it.
@wonderlingswilds2029 7 жыл бұрын
good job JerryRig I dont have the patience to do glass only, nor the time. I would go broke if i did glass only repairs!! Thanks for the detailed instructions!
@raulmorel1872 8 жыл бұрын
actualy, this is the best samsung repair on you tube.thanks GOD bless you
@abdulkadirmohammed6230 8 жыл бұрын
waw! he makes it seem so easy, i tried this before watching the video and ended up burning the display with the heat gun. this has thought me alot.
@TechDaddyK 9 жыл бұрын
Great video! It convinced me to tell a friend that I won't be able to help him replace just the glass. =)
@massimomax3215 4 жыл бұрын
just changed the glass of my s5 mini, had it laying arround cracked since 2 years, i came across a cheap glass on the internet, bought that and repaired it, now i got a brand new s5 mini as spare phone. thank you so much for this tutorial :)
@jhandsomeify 8 жыл бұрын
I watched a few glass replacement videos and this one was the best thus far. very helpful. I feel confident I can replace the glass on a Samsung galaxy s5.
@JerryRigEverything 8 жыл бұрын
+Jermaine Hart Thank you! And good luck! It is a tough project.
@khemyperez2023 8 жыл бұрын
IMPORTANT! Do not begin to pull the glass from the LCD on the top left corner of the screen. There is a ribbon connector there that if you break (like I did) will render the digitizer useless, and you'll have to buy the $100 lcd/glass combo.
@maclloyd2 8 жыл бұрын
+Khemy Perez Where do you find S5 LCD+digitizer units for $100? Pls, tell me.
@anteater219 9 жыл бұрын
This piece of shit breaks if you drop it on memory foam
@Sakura-ke3oz 6 жыл бұрын
I've dropped mine on hardwood floors without a screen protector and it hasn't broken yet.
@sunnyvara8502 6 жыл бұрын
Great video with alot of explaining....although who would you remove the LCD ? Who not take the glass out while the LCD is still in the frame ?....much easier and much much more sturdy.
@mrtaktiks 8 жыл бұрын
Nice work Jerry. You have the soothing voice of a psychoanalyst so I watched the video while lying on a black leather couch. I had a case of the shakes which in itself can be dealt with but it tends to make me "fumbly." I removed my safety cover (duh) to add the cordless charging back and BINGO, dropped the phone 3 x's. First glass broke. 2nd drop, no apparent damage. 3rd, got a white screen with small colored dots and minimal functioning. Darnit. Found a site which told me to remove battery and apply pressure with my thumbs throughout the area where the battery is located. Put it back together an WHAMMO, it worked. Now I will do your repair and check back in. Thank you and good luck!
@TuTo 9 жыл бұрын
Hey Jerry i Like your Channel :) nice Repair.
@JerryRigEverything 9 жыл бұрын
Smartphone defekt?Tutorials gecheckt!Auf Tutopolis TV √ Thanks! Glad you enjoy my videos!
@DeianGiNet 8 жыл бұрын
Great tut - however for what is worth here are my two cents - GO SLOW. the lcd is actually very fragile!!! I just pressed a bit too hard and that's it :( will need to replace the digitizer now
@Scavengefar 6 жыл бұрын
I could listen to you all day!
@CaseyFinSF 9 жыл бұрын
Well done! Yours was the first one that made sense with all the proper info you need to do either repair job... Thank you, and again - Great Job! I tip my virtual hat to you sir
@JerryRigEverything 9 жыл бұрын
Casey Fernandez Thank you! Glad I could help a bit!
@ilovefishcurry 9 жыл бұрын
Ahaha damn your voice is buttery smooth
@JerryRigEverything 9 жыл бұрын
ilovefishcurry lol, thanks!
@sarveshvashisht 9 жыл бұрын
JerryRigEverything Jerry please answer, i have decided to repair my phone. My question is can i use a 2mm double sided tape instead of the uv glue? I have read on some sites that 2mm dst can also be used. Please answer please
@tetryl1 9 жыл бұрын
Sarvesh Vashisht You can but the touch will not work as well, using tape only has a crap result so I would not recommend it. Also if you don't use glue dust will get between the glass and LCD. Glue is the only good method.
@JamarD421 9 жыл бұрын
JerryRigEverything how much will it cost to get the glass fixed at a repair store on average. I can't find any prices from any placd.
@sarveshvashisht 9 жыл бұрын
Thanks tetryl1and Khanin the Uhahkian i am gonna get my screen repaired. I went to a local store and cost was INR 2000. You can convert it to your local currency. I think it comes around to $31-32.
@xenvj 5 жыл бұрын
*KZfaq 2014 :* *KZfaq 2015 :* *KZfaq 2016 :* *KZfaq 2017 :* *KZfaq 2018 :* *KZfaq 2019 : YES*
@eachday5787 5 жыл бұрын
YES 2019
@gshsenpai6446 3 жыл бұрын
YES 2021
@gshsenpai6446 3 жыл бұрын
WE SKIPPED 2020
@eitangolan7765 8 жыл бұрын
AMAZING video, clear and precise instructions. Well done Jerry ! Few questions regarding this video: 1. It is mandatory to remove the digitizer from the phone body? is it possible to replace the glass just by heating the front glass and remove it? Of course it is needed and simple to remove the battery + SIM + SD, but why removing the entire digitizer? 2. if I don’t have a UV lamp, is it possible to cure the LOCA by putting the phone in sun light for an hour? 3. will it be better to cover the broken glass with a sticky tape? This way small pieces of glass will be easier to remove. Thanks a lot man !
@MrBobWareham 6 жыл бұрын
Very good Video and your voice is ok very clear instructions I have a Galaxy S5 that I love but I am having a problem with my screen that flickers sometimes any ideas Bob - UK
@cameronscholten7500 9 жыл бұрын
I don't have a hot plate and the idea of using a heat gun seems too difficult as this is my first time attempting anything like this. This may be a dumb question, but would an oven work or would that not work since it would get the whole phone hot instead of just the screen?
@87TechReviews 9 жыл бұрын
Cameron Scholten a hair dryer works also
@JaidenAlemni 9 жыл бұрын
An oven will wreck the LCD/Digitizer and other components and a hair dryer will take a very, very long time to heat to 97 celsius. I recommend just going with the heat gun. You can get a cheap one at your local Lowe's/Home Depot for like $30 or so. Same with the temp gun. Just be careful with a heat gun not to set it down on anything flammable and work on a hard, non flammable surface. I usually put a big ceramic tile on my wooden desk.
@edward6510 8 жыл бұрын
I have a problem. My S5 has a black screen but makes sounds, vibrates, etc. It also has small crack on top of screen.
@ryansevere818 8 жыл бұрын
why don't you use the thin wire to seperate the lcd from the glass
@edward6510 8 жыл бұрын
and then what?
@ISRAELITEKNUCKLEHEAD 8 жыл бұрын
try this The Cause Who knows exactly what triggers these things but if I had to guess it may be a build up of residual charge in the device or dust that’s causing the issue and either making the screen unresponsive to touch or resulting in a total black out of the screen, read on for the solution. How to fix an Unresponsive display or Black screen Samsung Galaxy? Method 1. 1. Power off the phone and make sure it’s completely powered down. 2. Remove the back cover and remove the battery. 3. Hold down the power button for about 1-2 minutes. 4. Leave the phone for 10 minutes or so, go take a walk or something. 5. After the time has passed power on the phone again and that should be enough to restore things to normal including touch or remove the black screen issue completely.
@edward6510 8 жыл бұрын
I was weight lifting and some how it compressed my phone and cracked the screen on the top where the connector is located.
@morganb900 7 жыл бұрын
ISRAELITEKNUCKLEHEAD Thank you so much that helped. I almost thought I would have to pay for another phone. I was speechless.
@shirleyannburke5728 8 жыл бұрын
You made it look so easy... Great job guy.
@munnibhai123 9 жыл бұрын
so far best tutorial with complete little instructions. Thanks alot
@sballack12 9 жыл бұрын
its easier to buy the screen with the digitize...
@JerryRigEverything 9 жыл бұрын
Shawn Ballack Bingo.
@sballack12 9 жыл бұрын
lol...
@vanlife6335 7 жыл бұрын
Shawn Ballack thank you! I hate when people buy just the glass and thinks we can fix it for $35 cause it's so easy...lol
@marcosruiz6573 7 жыл бұрын
Black Ranger why do you hate that? Wth 😂
@barbaraanderson8828 7 жыл бұрын
how much to just send you my phone to fix??
@stevenhaynes3475 7 жыл бұрын
HEY maybe I can
@user-cc9gy3fq5c 6 жыл бұрын
Steven Haynes hahahahhhhahhh csam
@fn_16thfamilys99 5 жыл бұрын
Very Nice Mr.Jerry.. I Like Yours Skill Is Very EXPERT..
@HopWorksET 5 жыл бұрын
Can you link your hot plate? That is one of the coolest things I have ever seen for this kind of work!! And thanks for the video!! My retired Galaxy S5's will live on!
@yellow824 5 жыл бұрын
I know now why the mall charges like $250 to fix a screen
@TheLevitatingChin 7 жыл бұрын
Haha! Tried this and cracked the screen. After that the phone got broke in half and thrown in the bin.
@JustinAbroad 7 жыл бұрын
The glass alone is cheap and breaks easily. its not the same gorilla glass samsung uses. you will have to get the LCd one
@matthewnickl9871 6 жыл бұрын
@13.07 when I was applying the glue I messed up and didn't get the glue to the edge and had to much on one side and not enough on the other. In my X pattern of glue I put to much on the bottom right and bottom and not enough on the top left, so I had some air bubbles sadly and it seemed over a ton on other sides and not enough on one. So spread your glue evenly and slowly!! Otherwise, I had TOTAL success. I spent HOURS doing this very slowly watching multiple videos, this one was my go to though because of how detailed the author of the video was. Also, he has a video on what NOT to do! So f' helpful to watch the common mistakes, it's insanely kind of him to ruin a few LCD screens just to teach us what not to do! Best video out there for this. I spent hours doing this, but with this video and the confidence it gave me I could do this in maybe 90 mins or less now. I will do this again but next time apply the glue better and I'll use this video again in a week or so to fix my air bubbles.
@SimpleSock 7 жыл бұрын
Fantastic guide. Just have one question, would a black light be a suitable substitute for a "UV" light, or do you need something specifically for this type of application? My girlfriend has a black light (for parties, etc) and I'm wondering if I could just use that rather than trying to find a UV light.
@opitts2k2 8 жыл бұрын
Completely viable repair option if you can: 1 Avoid cracking or scratching the egg shell like lcd with hours of jabbing at the screen with ever present glass shards. 2. Not discolor the lcd with over heating. 3 Invest in digital hot plate, loca glue, pry tools and lcd when you fail anyway!!! Oh and set aside 3 hours of repair time to save $100 bucks. DON'T ATTEMPT!!!!!!!!!!
@janicehall7907 8 жыл бұрын
do you fix phone for others
@otispitts4672 8 жыл бұрын
+Janice Hall Yes, Mrs. Hall. I buy the digitizers with screen in bulk from China and your phone is fixed in 10 minutes. Have a Good Day :)
@janicehall7907 8 жыл бұрын
I was asking if someone can get you to fix their phone for them if they are able to do it themselves.
@cyberspacelogic8954 7 жыл бұрын
Otis... Would you be willing to let me know your supplier from China? I'd like to start repairing phones but don't want to mess with doing the screen only repairs
@TERMINADA 5 жыл бұрын
2 0 1 9 ? Anyone?
@brada3904 8 жыл бұрын
Subscribed. Thanks for this video. I had my S5 in my pocket last night (had just taken case off) and leaned over my counter to grab a cup, and voila, the pressure between my leg and counter cracked it. I just ordered all the parts and will repair this sucker once it gets in. The cracks are minimal, shouldn't be near as difficult to get all the glass off!
@gurjotbajwa1583 8 жыл бұрын
I know this was year ago, but regardless, were you successful?
@anabelvelazquez2782 6 жыл бұрын
Wow!! You did an amazing job with the repairs. I am not sure this is something I may be able to tackle.
@1800levso 7 жыл бұрын
just buy a new phone, or have it somebody else do the repairs, unless you are doing this for bussiness is not worth it. mine is crack and I'll just keep it as long as still working, there is a lot of risk right there, you better not even try.
@shixuiuchiha6976 7 жыл бұрын
oosveluzo levso but you can't trust the repair shops
@marcosruiz6573 7 жыл бұрын
oosveluzo levso dude thats your opinion. Try to not be so pessimistic man, the whole world is out there.
@Renrondog 5 жыл бұрын
Right, you should just stay in bed...........safer
@biffhawkins1 9 жыл бұрын
Love your videos. So far I'm 100% at ending up having to buy the more expensive part but enjoying trying!
@deserthyperbaricsmedicine8662 7 жыл бұрын
Thank you. I did it....replaced LCD screen! You ROCK!!!!!!!!!!!
@mryeast2658 2 жыл бұрын
Hey jerry i miss this kind of contents. Maybe someday you will do it again
@MrSweetlyk 8 жыл бұрын
Nice and fast repair, it looks easy when you are doing it.
@edomar2r 7 жыл бұрын
I thought it was going to be easier but challenge accepted, thanks for the detailed tutorial.
@ken62748 8 жыл бұрын
YOU ARE GOOD MATE but I would not do this myself , need good eyes and fingers and equipment as well , you are 1 of the best person I have seen showing people things Cheers to you Ken
@grahamrichardson9613 7 жыл бұрын
Thanks Gerry. Great detail of what i thought was going to be the "simple" job that i was about to launch into
@Inspiration138 9 жыл бұрын
I'm so glad.i watched you're awesome video. Typically good things aren't cheap, and cheap things aren't good.
@sights2397 9 жыл бұрын
Nicely and carefully done JerryRig. Same thing happened to my S5, and after I took it back from the shop service that did the repair it looks that return button doesn't light up at all, while the other button lights on like 85 %.. Any idea of what they did wrong ?
@DeVRJB 9 жыл бұрын
wow.just wow. i just watched you without any worries.Just awesome!!!
@kungpao1930 7 жыл бұрын
Excellent video. Bought the glass, but decided I'm going to stick with my cracked screen after watching this. Have one of those thin cheap plastic screen covers which is working great.
@yaniktreize 6 жыл бұрын
The Bob Ross of cellphone repairs! But seriously, thanks a lot, this video was very helpful!
@irwinthedj 8 жыл бұрын
Thank you, Jerry, my S5 is absolutely as new now. It's a pleasure to watch your videos! Thank you so much! For the people who want to try it by themselves: I also used a laser cut adhesiv-tape to place glue the screen back (3$ on eBay), so the phone is water-resistant now, as in original. For guys without UV-Lamp - i have borowed one from my wifes nail-studio-set:) I also used her hair dryer to heat up the display, because my soldering-station produced to much heat at a small area:D
@JerryRigEverything 8 жыл бұрын
+Irwin irwinthedj That is awesome! I am impressed. Its a tough repair. And thanks for the extra tips.
@gurjotbajwa1583 8 жыл бұрын
How long did it take you? I love my s5 and wanted to wait one more year to upgrade but I dropped it while taking my dog on a walk. How much did this cost you in total, and how much experience do you have? I've done a repair on an s3 a few years ago but that's about it.
@irwinthedj 8 жыл бұрын
Oh, it took me pretty long, maybe 4 hours - 1 hour preparations, 2 hours for glass separation (was completely broken in tiny pieces), half an hour for LOCA part and another half an hour for putting the stuff back together.
@pikifrino 7 жыл бұрын
A real professional! Congratulations. Thank you
@chuckleclerc1155 8 жыл бұрын
plus a galaxy tab s glass repair tutorial is what I need. there currently isn't a good one on YT yet.
@majorrampager8078 5 жыл бұрын
Just got done taking the glass off, now to wait for replacement. Very helpful video😊😊
@davecummings7272 8 жыл бұрын
great vid ! very descriptive , well explained, lots of tips , do's and don't s, and a very clear voice. thank you! how important is the uv light ? would u attempt the repair without one ?
@dannylee404 7 жыл бұрын
So GOOD, so GOOD... how much is the hot plate, and what can we use in its place for cheap? did you not want to waterproof it with the gasket thing?
@jeffa1970 7 жыл бұрын
excellent!! clear and easy walkthrough .made replacing the glass so much easier thanks!
@keithnoneya 9 жыл бұрын
You're right this is the BEST one i've seen so far. Think I'll try this on my friends S5 Active. Could you put a link to your hot plate in the info below, or a good choice thanks. Keith
@meeksphatsugar7564 7 жыл бұрын
Fixed the broken glass on the camera of my 5s with great results. Got all cocky and bought a new glass for the cracked screen... than I watched this great video! and realised if I go through with replacing it myself, I'll have no phone. Mad! 😉
@NyQuil4U 9 жыл бұрын
lcd and glass best way to go! thank you for sharing great info!! helped so much!
@bennytru1981 9 жыл бұрын
Awesome videos as always !! Right to the point no BS. I have two questions.How come you don't use molds? i'm asking since molds are so inexpensive and can be reused and also i'm assuming making the aligning of the glass easier.my second question is: Can you in the future do some videos on basic soldering for smartphones? Great videos again!!
@Fluffy_Cow 4 жыл бұрын
The heat gun you linked in the description no longer exists on amazon (at least at that link). This seems like a great video and I can't wait to try and fix my old gs5!
@erictjones 6 жыл бұрын
Well done Sir! Very thorough and helpful. Thank you!
@markzanetti6228 7 жыл бұрын
a local repair shop (Tampa) wants $75 for this repair (glass only). based on your video its money well spent to have them do it. Great video. Thanks.
@stevengilbey9980 7 жыл бұрын
Thank you for a very clear video. will try mine tonight .
@merrillgray 8 жыл бұрын
Does the screen NEED to be separated from the midframe to replace JUST the glass? Thanks a lot for the awesome videos. I'm a subscriber!
@nithinz 7 жыл бұрын
Impressive repair. Thanks for the wonderful video.
@nicholeadams2689 9 жыл бұрын
Thanks for the instructional. May need this in the future. Could you use the residual glue around the edges to glue it back instead of the double sided tape? Would imagine you would need to be pretty fast and hit it with the UV light after reassembling. Not that it would still be IP67 rated but may be able to keep its water resistance.
@AFthawk 9 жыл бұрын
Great video man. Very precise and instructive. Thanks for sharing.
@DJManza_ 7 жыл бұрын
wow man you nailed it! After 3 years, my hole screen assembly is unsticking from the phone! So I'll have to do the double-sided tape part, and keep with my fantastic s5! 😂
@marshaburgess6059 9 жыл бұрын
Dude... I'd totally do this if I was tech savvy, but this still was very helpful in letting me know there is a way to fix my poor phone :) Thanks :)
@rova3889 8 жыл бұрын
Hi, thank you su much for this guide! I'm waiting for all the tools I need, I'm just gonna try the harder way. I got one question: is it possible to remove the glass from the lcd without having to remove glass+lcd from the phon chassis, as you cand o for galaxy s3? Thank you again for the video ;)
@johnbennett5035 7 жыл бұрын
Thanks for the detailed videos. I tried replacing my screen and the LCD panel and all went well except the left side of my screen doesn't lay flat. I've redone this twice now with the same results. I was careful to remove all traces of glue but something is keeping the screen from seating. Ever have this problem?
JerryRigEverything
Рет қаралды 3 МЛН
JaiRestore
Рет қаралды 32 М.
reza_ghahremanlo
Рет қаралды 3,7 МЛН
THÁNH ĂN TẠP
Рет қаралды 5 МЛН
Мотивация на Миллион
Рет қаралды 4,4 МЛН