How to replace iPhone 7 Battery in 3 minutes

Рет қаралды 2,494,773

7 жыл бұрын

Here is the Y000 zero bit: amzn.to/2efbH2U
Pentalobe screw drivers: amzn.to/2e3p9uP
Green Pry tool: amzn.to/1Tu57pI
Phone opening metal tool: amzn.to/1WdOFv0
The Battery is not yet available yet. Keep checking back, or if you find one let me know in the comments!!
Use these adhesive strips to hold your new battery in place: goo.gl/VCxtUK
Let me know if any of those links stop working.
This video will show how I replace the battery in my Apple iPhone 7. If your battery is lasting less than 2 or 3 hours, or maybe it gets to 30 percent and just shuts off randomly, it might be time for a new battery. Sometimes disconnecting the battery will get rid of any software errors like it did with the 1-1-1990 glitch: • January 1, 1970 Bricke...
Remember all repairs are done at your own risk. The repair itself is not that difficult if you have worked with tools before. And you are careful removing that screen.
Awesome Smart Phone Tool Kit: amzn.to/1XdJPuA
Green Pry tool: amzn.to/1Tu57pI
Phone opening metal tool: amzn.to/1WdOFv0
The camera I used to film this video: amzn.to/1IjlaCD
The Lens I used for this video: amzn.to/1QOXDw2
And this Metabones adapter: amzn.to/1R7Ltic
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
Snapchat: bit.ly/1UAb2Fq
GooglePlus: bit.ly/1YyKice
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Пікірлер: 1 100

@RyeOnHam 7 жыл бұрын

Much easier to do on the Galaxy Note 7. Just plug the charger in, rattle the phone, and the battery just explodes out of the phone. Reassembly is a little tricky, though.

@pakaroach5899 6 жыл бұрын

iphones do it too

@coolman2k2 5 жыл бұрын

paka roach don’t be that guy...

@spudson60fps35 4 жыл бұрын

@@coolman2k2 iphones Bent hahajha

@weirdmelvin335 4 жыл бұрын

VerdactPlays atleast no one can die from a bent iphone

@spudson60fps35 4 жыл бұрын

@@weirdmelvin335 lol both of these were long ago.

@TrevorDBEYDAG 2 жыл бұрын

This is not only a basic battery replacement tutorial - This is storytelling about how to change the battery in a lyrical way. 😀👍

@WinkBlinkNod Жыл бұрын

I was terrified to replace my battery because I had never done it before and I absolutely cannot afford a new phone if I effed it up. These directions were so easy and put my mind at ease to do this quickly and without incident. Thanks for helping me give my iphone 7 new life.

@wolfkat6492 Жыл бұрын

Well… did ya change battery yet?

@WinkBlinkNod Жыл бұрын

@@wolfkat6492 Yes. Unfortunately, about two weeks later, I dropped the mf phone and it was toast, so I didn't get much life out of it. :(

@DavidDrivesElectric 3 жыл бұрын

Thanks for making this video so simple and short. I hate videos that talk way too without adding information. One small suggestion, it would be very helpful to have one freeze frame of the assembled inside before closing it. Would be a nice reference to see how all parts align. Especially some of the metal covers. I followed your video and got mine replaced in 30 min.

@emo_panda 4 жыл бұрын

While I ended up having to do the pry of shame, this video helped me immensely because every other guide I read made it sound like removing the barometric vent and taptic engine were necessary. This saved me so much time. Thanks!

@taniaares6883 2 жыл бұрын

I have to do the pry of Shame, any tip? I see the battery bending and i choked to go further i dont want to put the kitchen in fire

@gangqian7287 Жыл бұрын

@@taniaares6883 I found I didn't need to pry all the way through. I pried just enough to be able to reach and pull the adhesive again, which helped a lot. The heat gun also helped to weaken the glue.

@signforu 2 жыл бұрын

WONDERFUL! I accidentally clicked on this instead of 7+, but your directions were so succinct but thorough! My favorite part was about you warning us that the white sticky strip might break and then I believe you said "you will have to do the pry of life" or something witty. The 7+ had three strips and two came off fine. The third didn't! I had to do the "pry of life" - so difficult, and it ended up bending the old battery. So then I was thinking "if I don't get this new one in correctly, I'm f***ed!". All went well. New battery installed. Battery capacity meter in settings went from 70% to 100% and all is well! Today, you are my hero!

@221b-Maker-Street Жыл бұрын

Hello. Other than the things you've described, is there any other difference in changing the 7+ battery from just the 7, please? I'm about to attempt both the battery _and_ the screen replacement on my battered iPhone 7+ and came hunting for a 7+ replacement video on Zack's channel but couldn't see one! Would like to learn from your experience if possible - thank you!

@rakshith1994 3 ай бұрын

where did you buy the battery?

@Gibender1 3 жыл бұрын

Thanks. Between your instructions and the instructions that came with the battery and tool kit, I was successful. I will note that your video was 3 minutes, but it took me almost two hours to do the job. Also, I wouldn’t advise any one should try this if they lack patience and a hands free lighted magnifier. I didn’t know screws could be that small.

@lucylucille5374 4 жыл бұрын

Actually went smoother than I expected my replacement battery showed up and watched a previous video that said to remove taptic engine; however, the screwdriver they sent didn't work which left me at loss for trying to figure out how to remove it. Found this video and said I didn't need to remove it but just pull the glue tabs carefully. Thank you again.

@TheCgraham18 7 жыл бұрын

Awesome video, thanks for posting! Other videos recommend to remove a whole bunch of extra components which can only cause problems. I like that you have simplified the process. Keeping it simply means you are more likely for success. Great video thumbs way up!

@Tytyrytkataaa 3 жыл бұрын

I was planning on replacing mine myself but after watching this video i cant help but see a dozen ways to mess it up considering all of the glue inside this phone. Best leave it to the people with experience and pay a bit extra. Having a lot of experience with diy myself, i’ve learned that you should know what you can fix and what you can mess up trying.

@kmorgan28 6 жыл бұрын

this procedure worked very well the less of messing with very very extra small screws is a big plus not messing with the taptic engine and the other cover greatly reduces the headache none of the other videos i watched worked it out like this

@TheDroidMate 2 жыл бұрын

Just coming back because I found this video incredibly helpful, but have a remark too. Note that (other than said at 0:28) a suction cup is helpful, just make sure you REALLY heat up the respective area (bottom) with a hair dryer. when sufficiently warmed up, you can get under the display with a plastic opening chip without any hassle (no metal blade needed). Other than that, just follow the video, it's been brilliant for me.

@mosiowaty1573 4 ай бұрын

Thanks, 130 degree hot air for 10 minutes was the ONLY thing that could do the trick for me - no prying in the world would help in the case of my phone

@austinbell3846 5 жыл бұрын

Thanks! I've repaired several 5s, 6, 6s screens. But never a battery. My iPhone 7 battery had degraded to 78% so it needs to be done. Can't you buy the waterproofing seal though?

@alberteinstein5942 7 жыл бұрын

I love your videos, and you have a great voice for this field of work.

@JerryRigEverything 7 жыл бұрын

+Albert Einstein Thanks Einstein. I appreciate it.

@philwong868 Жыл бұрын

Great video. Quck on detailing the steps and showed how to remove the battery adhesive by hand where as other videos used something to wrap the adhesive around. Using your video, I was able to remove the adhesive perfectly where as in the past it always broke on me. Thanks for making this!!!!!

@rbmwiv 4 жыл бұрын

Thanks that’s a piece of cake compared to changing the screen on a Motorola A4. I had to break out the heat gun I use for SMD work and the same tool you did. Luckily it comes out a lot easier than the Moto and easier than I thought. Thanks for the video. It showed me where to pry, just finished mine. Keep it up 👍. Thanks

@Mitchb103 3 жыл бұрын

Great vid! I had no idea what I was doing and I did it in about 10 mins. Great tips as well! Didn’t even smash my screen

@Orashidimaru 7 жыл бұрын

hey Jerry...can you do a video on how to restore the waterproofing? I'm curious to know any methods available

@bkillz33drift 3 жыл бұрын

been watching for a long time decided this morning im going to subscribe because your the only one i see everywhere with solutions to most the things people need to fix day to day

@matthewbirkeland-green4356 4 жыл бұрын

Many thanks, pulling the adhesive out is something I didn't know! Easier than an SE

@facuc 3 жыл бұрын

Amazing tutorial, with your help I managed to change the battery. It took me a while (30m) because I took extra care. One comment to make, my Iphone didn't have the ribbon you mention and I had to remove only one screw to install the battery. I had some trouble with the pull tabs. The first one broke just in the start and it was accesible, however, I managed to pull it offwhile removing the second one. I pulled and try to stick the blocked tab with the one I was removing and I managed to remove the two at the same time (got lucky I believe). Thanks for your help!

@MavenHQ 7 жыл бұрын

Your videos usually are amazing and "well made". I think this one gives me a feeling that you rushed it it's like you wanted to be done with it and not take your time and make a nice informative video like the others. You cut the adhesive beneath the battery twice and in the end there was some left in the bottom. Also, you do not mention what we can do before we place the new battery, i mean does it come with its own adhesive in the bottom? Should you take off all of the adhesive left in the bottom from the previous battery? Thanks for your videos mate they are truly brilliant.

@oughttaknowm6536 4 жыл бұрын

Looks very easy so I hope it is!! I am going to try and put my iPhone 6 battery into my iPhone 7. But I’m probably going to need a new iPhone 7 battery! Current battery drains WAY too fast!! But thanks for these instructions. My daughters flat out told me that I cannot do any of this!! I’ll let ya know!!

@x0r1k 7 жыл бұрын

It's always pleasure to watch your videos, even if I don't have an iphone nor plan to buy one in the future

@BethKohn 2 жыл бұрын

Thanks for this! I've NEVER replaced a battery on a phone. I forgot that I had bought a battery for an iPhone 7 that I knew was dying, just rediscovered the phone and the battery a few days ago, and since I have a new phone now I figured; "why the heck not?" Followed these directions and it worked like a charm. Thankfully I already owned a similar pair of tweezers and my husband had a tiny screwdriver bit set. My old iPhone 7 can hold a charge and now I can use it for my second Pokémon Go account =)

@MichaelMolli 7 жыл бұрын

Jeez, that looks ever so simple, watching this video. But when I try by myself, I'm sure I screw everything up.

@howardy8333 3 жыл бұрын

@@itzishaantv5448 dude that was 4 years ago haha

@user10717 3 жыл бұрын

@@howardy8333 🤣🤣

@avery6950 3 жыл бұрын

you just gotta be confident

@danielnunezramirez6182 3 жыл бұрын

I’ve changed a bunch of iphone 6/6s screens and batteries and yeah At first i was all shaky scared to break stuff and checking yt tutorials step by step Then you can do them and watch some tv at the same time bc you get confidence 🤠

@hoomalimali6334 Жыл бұрын

Dude, couldn’t have done it without you. And hardly had any parts left over!

@prateeklife20000 3 жыл бұрын

You made it look super easy. I ll leave a review attempting the steps on a device soon. Thanks.

@lucreinink 7 жыл бұрын

When Apple replaced my iPhone 6 Plus screen, it had 'sharp edges' when going from the screen into the metal casing, while it was flush before. I was wondering whether you also have this now you have replaced the screen.

@lokeshravichandra3205 4 жыл бұрын

Awesome guide took 20 mins but successful changed in first attempt 😃 thank you

@RavenMaven 2 жыл бұрын

Just changed mine - no issues at all woo hoo ! The replacement kit I bought for $10 came with new waterproofing rubber but I didn't install it. Great video !

@robertheffernan2592 3 жыл бұрын

Thanks Jerry for thus at last someone that gives us a proper basic how to for things

@AndroidProUser 7 жыл бұрын

He made this seem really easy. Nice to know. I keep my iPhones 4 years usually and always replace the batteries around the 3 year mark. They get weak at about 2.5 years.

@Theoffcailme 3 жыл бұрын

Where u get ur batteries from?

@srikarvundavalli5934 3 жыл бұрын

@@Theoffcailme Same question. My battery is 4.5 years old lol

@amelanaestidal6549 3 жыл бұрын

@@srikarvundavalli5934 Ebay or Amazon, dont expect a reply from the guy after a 4 year necro :D

@srikarvundavalli5934 3 жыл бұрын

@@amelanaestidal6549 Ebay is not available in my country. Amazon batteries also have some negative reviews and Apple service is asking half of what I would get if I sell the phone. I’m thinking about just selling it

@steveraby6023 5 жыл бұрын

Thank you for making this video. Swapping my battery was a piece of cake.

@TheKnowledgeGateway498 3 жыл бұрын

Did it. Got minor dent at the bottom frame but doesn't look noticeable. Removing adhesive part was true. Got one adhesive out easily but other broke while pulling it up. So I literally had to use plier to fold the battery a little bit to pull rest of the adhesive.

@GOODNESS-sp4hm 3 жыл бұрын

You have made it so easy👍🙏 Need to know does all iPhone use exactly the same kind of battery!

@snells-window 10 ай бұрын

Thank you for this video: I just changed my battery, and even though I had to do the "pry of shame" it worked well. One thing which I should point out is that when reinstalling the screen, there are 2 small tabs at the top of the screen that need to slide under the frame, so get these in place first, before gently pushing down and securing the rest of the screen

@LosBigga 10 ай бұрын

Where you able to see the battery life? Did it go back up to 100%

@snells-window 10 ай бұрын

@LosBigga yes, it works well for me, the battery now lasts all day

@TheVeganBear 7 жыл бұрын

I find these videos relaxing like ASMR. Tho I'm happy sticking with my Note 4 with a removable battery.

@originalFAKEDJ 8 ай бұрын

@JerryRigEverything not only the suction cup was essential when i was replacing my battery but it was also essential to firstly heat the phone a little up. before that i was unable to insert the pry tool in the gap between the frame and display.

@grudzien9784 2 жыл бұрын

Love your videos. This one is 5 years old but it just helped me replace a battery on my 8 year olds iPhone 7 so thanks a lot ! Also awesome job on your electric Hummer. So cool.

@harisheknath3085 Жыл бұрын

Can u please provide me the link to order battery for iPhone 7 ?

@AD-vw8xu 3 жыл бұрын

Cracked my screen instantly.

@Deepthoughts272 3 жыл бұрын

🤣🤣🤣

@lisdenkawasakianims9713 3 жыл бұрын

Rip

@AD-vw8xu 3 жыл бұрын

@@markboldariev yup

@andrewwwmmorg 3 жыл бұрын

Fuuuuuuuuuu

@doconyoutube2365 3 жыл бұрын

If i change battery to iphone 7 will overheating issue be solved ??

@darkdroiddesignz 4 жыл бұрын

Awesome. Super helpful and very easy swap. I was worried I’d have to take all the cables out to get to it. This made things super simple. I knew I shoulda replaced the battery when I just had done the screen a few weeks ago. 😂😂

@DavidSmith-fw3if Жыл бұрын

This is far from easy to replace a battery. Why you can't just access it like anything else should be criminal. Apple wants you to either break the phone or not try replacing it. This is disgusting.

@vitodefino5305 2 жыл бұрын

it took me almost an hour to replace the battery because of that adhesive strip attatched and taking my sweet time prying the screen so i wouldnt scratch or crack it, but i was able to fix my little sisters phone from dying so quickly and apparently the battery i bought lasts longer than the original so thats a plus, thanks for the video the other two I watched just added unnecesarry steps

@kvshilling 7 жыл бұрын

Hey very good video as always. You give a unique in depth look as every phone you review. I'm witting this because I'm curious what your current daily driver, so what do you think is the best phone out there in a hardware and durability stand point. I was pursuing getting myself a Note 7 but I guess the battery had other plans for me.

@LIKWID 7 жыл бұрын

Love these videos man, so informative!

@ProMoe_ 7 жыл бұрын

Two things buddy; First you should've mentioned ESD precautions. Second you also should have mentioned that removing the display without reapplying new screen stickers might affect water resistance quality and it won't be as resistant as it was before. Thanks

@leestickland5651 4 жыл бұрын

Great video alot of help but screen was a nightmare to get off as needed the same too as in the video only had a cheap plastic one with the kit i got with the battery

@johnleonard3951 7 жыл бұрын

(go easy on your phone it has had a rough day) lol . Always enjoy the info in your videos

@salukaranapura6031 5 жыл бұрын

Hey Sir! Why didn’t you put the water/dust resistant seal?

@hltigue 7 жыл бұрын

You make everything look so easy. thumbs up

@thahn8625 10 ай бұрын

Again love your easy to follow tutorial, I guess miss the time since my screen is cracked!

@theophilhist6455 11 ай бұрын

Thanks for the help. I had both tapes break and had to do the pry or die...and actually pierced the battery had some smoke. But all in all seeing what to expected managed the expectation angst. I saved time and money. Thanks again

@joshuagilcrease9456 7 жыл бұрын

are you planing to do a durability test on the Google Pixel? I'm very interested to see how the back of that phone holds up.

@JerryRigEverything 7 жыл бұрын

+Joshua Gilcrease I'm planning on it!

@tadejloncar 7 жыл бұрын

JerryRigEverything Noooooo DONT 😁

@Admiral_Ali 7 жыл бұрын

JerryRigEverything Sony Xperia XZ review please

@generaalpep 7 жыл бұрын

Jerry, you forgot to put back in the waterresistant seal :(

@venanciochaves1103 4 жыл бұрын

where can i find to buy this seal?

@randomyoutubevideos3503 4 жыл бұрын

Daniel Kalita ALWAYS buy from known companies because fake parts or parts from unknown company’s might not be made correctly and start a fire or ruin your phone.

@WorlofDead 4 жыл бұрын

@@randomyoutubevideos3503 that is true but you should only worry if ur trying to save as much money as possible if u are aiming for quality products they dont come cheap and when I said "ifixtit or websites like that" I meant only from trusted companies and ifixtit is a very trusted company tho their prices are quite high there are other websites I've used that sell for cheaper with almost or exactly the same quality

@troyjefferson9204 4 жыл бұрын

Yes he forgot that and he also fogot the adhesive sealed on the battery I'm very sure the battery will wiggle all the time🤣🤣

@desmondoverton5690 3 жыл бұрын

How do u put it in?

@Zen20000 Жыл бұрын

Thanks man. Got an iphone 7 that I'm going to start to use as my main phone again. Battery says 77 percent capability so basically service. Will buy battery for a tenner on ebay and follow these steps. Legend.

@abbyfer8705 2 жыл бұрын

Best video ever. The hardest part was opening the cover. Took about 30 minutes total. Thank you!

@MichaelSukiman 7 жыл бұрын

Hi Jerry, When you replace the new battery, i see you didn't put or apply any adhesive back on the battery. Does it rattle?

@tasnimah.k1540 4 жыл бұрын

No as the adhesive is for it to be waterproof I believe

@tasnimah.k1540 4 жыл бұрын

Hassan Ali yeah i had found out later on that it was for the battery to be in place however Apple also use the adhesive to block out any water from coming in as well as that @michael I had done my own iPhone 7 battery replacement and it was the absolute worst the battery kept and rattling because I didn’t put in any replacement adhesive so if you do plan on doing so I’d recommend investing in some adhesive strips

@carlosmiguel4756 7 жыл бұрын

There goes the water resistant looool Top video man nonetheless!

@aekantikdalal2897 7 жыл бұрын

dont have and iphone but its quiet fun watching your videos. as always keep up the work. its amazing and unique!

@OilBaron100 4 жыл бұрын

Have just completed this battery replacement myself. Thank you kindly for posting the video, Jerry :-)

@CroakerOutdoors 4 жыл бұрын

Did your home button work?

@OilBaron100 4 жыл бұрын

Croaker Outdoors it did work and it does work.

@CroakerOutdoors 4 жыл бұрын

@@OilBaron100 Thanks, glad to hear it. Mine decided not to =/

@OilBaron100 4 жыл бұрын

Croaker Outdoors unfortunate to hear. You may have somehow damaged the button’s wire ribbon or connector.

@CroakerOutdoors 4 жыл бұрын

@@OilBaron100 Undoubtedly so. My fault for not researching the swap thoroughly enough. I have an SE replacement coming in tomorrow so lesson learned.

@robertjensen1048 7 жыл бұрын

You know the screws are tiny, when even under 3X zoom and watching the video on full-screen they STILL look tiny.

@joshuamunoz5094 5 жыл бұрын

One of the screws for me to remove on the top left corner feels like it’s on there pretty tight, any suggestions on how to remove the metal plate without damaging it?

@usnaxapiemom 4 жыл бұрын

Thank you! I think you helped me decide that I will probably have someone with more tech experience do this for me... 🙃

@ObstojGaming 7 жыл бұрын

plz do a durability test on Google pixel

@coolvips100 7 жыл бұрын

We want a Google Pixel Bend Test!!!!

@rameshnyberg2257 4 жыл бұрын

Great simple instructions. Thank you!

@mrjsn6255 7 жыл бұрын

jerry please can you do a test for note 2 and such other phones to compare the durability of these phones in comparison to new ones

@ChargedCMOS 7 жыл бұрын

warm and fuzzy on the inside 😂😂 :))

@diegomartin5611 7 жыл бұрын

I just watch this bc it's so relaxing for me

@jameswyllie9608 3 жыл бұрын

Cheers I have replacement adhesive tape not in the video great vid you have yourself a new subscriber keep up the great videos

@Rod_Bad 3 жыл бұрын

Amazingly clear explanation! Thanx Jerry! I'm doing it myself.

@ChinmayDhumal 7 жыл бұрын

After the battery replacement, I think we lose the water resistance. Right ?

@JerryRigEverything 7 жыл бұрын

+Chinmay Dhumal indeed.

@NoName-jz4lc 7 жыл бұрын

+JerryRigEverything Zack... uff... i wanted to ask... coff coff... for the third time... "Breathing" Alright. Are you gonna test de xiaomi mi5S and the le eco le pro 3? They both have a snap 821, and very inexpensive.

@ecbadboy101 6 жыл бұрын

You can buy another adhesive strip to go around the screen and if done properly, can bring the water resistance back!

@lukes2219 6 жыл бұрын

Jerry rig: just cut through all this water proof adhesive Guy: does this take away the water proofing?

@Lynkyn33 5 жыл бұрын

Chinmay Dhumal

@Gothika666 7 жыл бұрын

🔋🔋🔋🔋 By the way, I've always wondered, why is there so few tests of Sony phones? I think it'd be interesting to see how the XZ compares to other phones.

@vtt3808 11 ай бұрын

Tks for your video. I Both of the adhesive strips break when I tried to pull out, but what should I do pls

@Frystalizer 2 жыл бұрын

Did it. Thanks for the part that we don't need to disassemble the Taptic engine as other tutorial show as well as the suction cup.

@jerameywilson6831 7 жыл бұрын

Hi, I run a phone repair service and am opening a DiY section on my website. May I use your videos for the tutorial section as longs as i link them to your youtube channel please?

@JerryRigEverything 7 жыл бұрын

+Jeramey Wilson you can embed the videos wherever you want! Just don't reupload them. Thanks for asking!

@jerameywilson6831 7 жыл бұрын

Thank you I appreciate it

@ryp1562 3 жыл бұрын

“”In 3 minutes” hahahahaha good joke bro. Video helped me a lot though , thanks 🙏

@PeacefullSky90 4 жыл бұрын

I’m not sure where I can ask this question. I followed this video and the instructions in the kit I bought. Everything went ok. When I put everything back together it seems the battery is running warm and the home button no longer works. Any troubleshooting tips?

@ericg6421 5 жыл бұрын

@JerryRigEverything Just done this on the *2016 iPhone 7 Plus.* Thanks for the guide. Those pull tabs tho' got me. The 7 Plus has *3* (three). I was able to pull the right and left without issues, but the middle one tore off -- taking me another 10 minutes to shimmy the battery out. Once all is set and done, I've successfully swapped the 3 year old *2900 maH* battery with a *3300 maH replacement.* The *Battery Health* settings went from a used *85%* back to *100%.* And this *slightly bigger* capacity replacement doesn't seem like it's going to be drained as fast. Onwards, with the 7 Plus for another 3 years *(Year 2022).* I've also purchased a *$9.99 Qi charging lightning pad* and put a matte black case on it. Now I have *wireless charging.* 👍🏼👍🏼👍🏼

@noname-ms7pq 5 жыл бұрын

Did you use a suction cup or not because I wanna do this but idk if I should use a suction cup??

@billroberts6797 Жыл бұрын

What about replacing/reapplying the waterproofing adhesive of the iPhone?

@StudioLB Жыл бұрын

Apparently he was clueless about that

@350zblue6 Жыл бұрын

@@StudioLB yup, wasn't very helpful on where to place new tape or gasket has, he didn't change neither of them, off to the next video to get it done properly, IOl.

@nuttmeg2010 7 жыл бұрын

great stuff man

@ITSTHISEASY 4 жыл бұрын

I saw when you were done it said your Touch ID will not work anymore. Have you ever found a fix for this because mine is doing the same after the replacement. Thanks for the help

@jakubivancik8110 Жыл бұрын

Thank you very much Jerry, it was very helpful - you did it like a good teacher.

@rish2891993 7 жыл бұрын

Last time I was this early, The I phone still had a headphone jack

@ALI.x 7 жыл бұрын

Rishabh Gupta omg so unoriginal

@Onn1 7 жыл бұрын

Rishabh Gupta Last time i was early, this joke was funny

@Wildledroses 7 жыл бұрын

Onni B last time I was this early you were born 9 months later

@sadladd 7 жыл бұрын

Wildledroses -- Last time I "CAME" this early. If you don't say "came", your original and not at all annoying joke makes no sense.

@squidnetwork4347 4 жыл бұрын

Plus the galaxy s10

@wild_for_nature9932 4 жыл бұрын

My anxiety level is through the roof 🤣. Not even gonna try and attempt this

@rbmwiv 4 жыл бұрын

Quick tip I figured out how to reinstall the waterproof adhesive without removing the display. After you peal the Bottom off the gasket cut a hole in the center of the plastic to clear the cables and make a snip with small side cutters so that you can twist it and locate in position, them remove the top plastic and bam it’s back sealed up and without unhooking the display cables. Thanks less than 5 minutes to add the gasket. Great video, I followed it for my battery and was inspired on how to easily seal up the phone.

@bauke-jandavids7532 7 жыл бұрын

With all of those scratch tests with gorilla glass etc can you test those generic '9H' glass screenprotectors on ebay and see how scratch resistant they actually are? I would be really interested in the results

@FolhadePapel 7 жыл бұрын

Good video 👍

@JerryRigEverything 7 жыл бұрын

Thank you!

@mateuspollonio 7 жыл бұрын

does any smartphone with ip certification 67 or 68, once opened wont be anymore water resistant?

@JerryRigEverything 7 жыл бұрын

It will not be water resistant anymore after being opened.

@michaelnasralla58 7 жыл бұрын

mateus pollonio No, it will not be water resistant anymore. Opening the phone will also void your warranty, no matter the circumstances. To answer your question more adequately, opening the phone and then re-sealing it exposes it to all kinds of danger ranging from water leaks or dust infiltration because the then tightly sealed body will be slightly open and expose it to the elements. No water resistance, no warranty. Hope this helped, have a good day, sir!

@michaelnasralla58 7 жыл бұрын

***** I'm not too sure, but I'm fairly certain they will also say it's not water resistant anymore since the device has been opened and they can't guarantee that no water or dust will seep in

@TheDiamondGames 7 жыл бұрын

nanank99, If it is under warranty, they are rich enough to just replace your phone.

@user-ss2jo9hj3p Жыл бұрын

Ok 👏 all finished. just had a nervous breakdown but it should all be working!!

@MrScarecrow24 Жыл бұрын

Very helpful and easy to follow. Thank you!

@ericschmidt1987 7 жыл бұрын

Im worried opening the iPhone 7 will compromise the waterproofing!

@tommyverstraete5678 3 жыл бұрын

Right? He doesn't even mention re-applying the waterproofing adhesive or the battery adhesive.

@undefinedchannel9916 3 жыл бұрын

@@tommyverstraete5678 4 years too late, re-applying the adhesive is a very simple task

@AakashKalaria 7 жыл бұрын

2:15, Magic!

@milesribouturruella411 3 жыл бұрын

I guess

@alywoolsey 3 жыл бұрын

love the commentary! haha, but you’re missing the adhesive! you must glue that battery down and put a new seal around your bezel or the phone with be “squishy”.

@marcosgonzalez-cardoso1115 5 жыл бұрын

Great video!! But I have 1 question. . . Can you take an iphone's 6 battery and put it into an iphone 7? Cuz my iphone 7 got wet and now I was wondering if I could change the 7's battery for the 6's one cuz I cant get to unlock it so yea. . . . . . . Thanks if anyone helps

@Skizzy034 7 жыл бұрын

Is the waterproofing gone after this?

@naldyano 7 жыл бұрын

Scott G. Yes

@sylvainalain6637 7 жыл бұрын

Scott G. Is there a way to make it waterproof after the repair ?

@NoName-jz4lc 7 жыл бұрын

+Sylvain Alain Adding a few amount of silicone maybe?

@farinhaha 7 жыл бұрын

if so, you can make 6s or other iPhones waterproof too.

@schantzee5733 7 жыл бұрын

I'm pretty sure the 6s doesn't have water proof ports or speaker grills so good luck with that. You could make the i7 mostly water resistant again by replacing that adhesive on the frame during the repair but replicating the factory seal is an unrealistic expectation.

@TheTaytoni 7 жыл бұрын

so after a battery replacement the phone looses its water resistance?

@ladude4484 7 жыл бұрын

Taytoni for sure better take it to Apple to make sure it's done properly.

@sandroantadze 7 жыл бұрын

I love watching these videos even though i am scared to replace anything! ))

@frekkledipped 2 жыл бұрын

Thanks J not sure if I have a I 7 or? But this was very helpful as my battery hs to be charged evey5-6 hours and the idiots at the stores only want to sell me a new phone.