I wanted a Celica GT-4 scale model, but after that, i think that a real Celica will give me less trouble.

54 year old beginner without anyone to answer my questions. Your really well done video is a huge help . Thanks

wow as someone who is just stepping into the hobby, I really appreciate these videos.

Pro tip: When spraying over masking, spray with a light coat of clear or the base color (in this case white) to seal the edges and help prevent bleed through.

Thank you for posting this video, I am going to attempt my first 1/24 scale plastic model build in many years. I use to build plastic models when I was a teenager, I am 61 now, I have shaky hands and bad eyesight but feel the need to do something with my five-year-old grandson and he has asked me if we could build a model car together. I cannot say no to him. This tutorial has shown me what products to purchase and some very useful steps to take and procedures to use. Wish me luck and God bless.

Oh wow, you really tackled every item, tool and process required to build a nice car. Really appreciate your time to film such a video and upload to us all. Well done.. and amazing Evo in the end too 👍👍

I built the 66 Batmobile with dad and he recently passed away so I bought the 89 Batmobile in honor of him. He did most of the work on the last one so I got to figure out to build it properly

I have 17 years old Ferrari F430 kit, untouched and in brand new condition and thanks to you I will able to finish it. I was overwhelmed how many tools and equipment I am missing but you clearly showed you can do it with basic set. I am really grateful, amazing content.

Just got my first kit and I'm so hyped to make it.

A trick for everyone to make it just a little easier. When doing things like rivets in silver you can always use a silver sharpie

Great work. Personaly I would not have gone black panel lines. I would have gone for a light silver grey and not thick. You want it to be a light hilight, shadow effect. Not full in your face. I would have used a fine line pen. Worked great on my railway bridge to highlight themortar in the bricks. But still a great tutorial. I have a Tamiya MX5 to do but want to get it spot on that it matches my own MX5. I have been told flocking powder for carpets too.

I am also a creator of pre-analyzed miniatures and I try to improve the techniques by seeing other works like yours very good without a doubt.

Finally a video that shows paint, sanding, clear coating.

Doesn't matter if you make trains, planes, ships, cars or whatever else in plastic kits this video is useful.

A very good tutorial for beginners! I'm planning to try something new this month and I think customizing model cars is the thing. Thanks for the tutorial 👍

This video is exactly what I was looking for. Very informative and easy to follow. Been building gunplas for a while and I’ve been interested in upgrading up to this level of complexity so I’ll give it a try now 😊

i’m always amazed by how well these come out

I'm getting my dad a model car for Christmas from the hobby lobby I work at so this video is helpful for letting me know what I need to buy👍🏻

My dad gave me a model porsche for christmas, and i wanna build it so bad! Thanks for this video!!!

Your video is the best I've seen so far for me to start modelling myself. Keep it up!

That looks amazing. Getting back into it after doing these as a kid. I had no idea you could get so detailed. Very nice 👌

Because of the videos and models I've seen in your channel, ouu I think I'm gonna get into a new hobby! All thanks to the videos you have!

Love it I’m thinking of getting into building models very helpful I appreciate all the time that you put in this video love it thanks

Great video! How to, products used, explanations, and full build. Love it. Subbed!

Great video for beginners and guys who start again like me. Thx alot for it. Now I need to make a big order for tools, stuff and colours I need 👍

Great job! I watched the video a couple of times!

If I had the patience like you do I could improve tremendously but I get to a certain point hen want to hurry up and finish the model car.What wonderful job you did with the details thanks for sharing.

awesome, been looking for a tutorial like this for ages, great help 👍💯

finally, video of this hobby from a malaysian. thank youu 🙏

Too freaking badass my friend, I see a previous one and I think it can't get any better than that and then each time you just amaze me. It is absolutely beautiful my friend.

Outstanding work!

See price the tag.. Terbaik bro keep it up.

Thanks for clear and easy turtorial! 👍

Thank you. I appreciate your time. Very helpful

I just got gifted an R32 model kit and these videos are helping me a lot! Thank you 🥺🖤🌸

As a beginner, thank you so much for this video! Super helpful!

Oh wow this wasn't posted back when i started and was looking for hobby model kit tips n how to videos lol there were not many at all on KZfaq only a few years ago but it looks like i should look again!

My girlfriend just bought me an MR-S so I’m excited to get the equipment and start building it, thank you!

Awesome job. Alot of patience on that body work!👍🏻. A trick ive used is after ive sprayed the body i place it under a box so no dirt dust etc can land on the wet paint and ruin ur hard work!

tq boss untuk tips masih cuba2 ni👍🏻

Thank you so much for these great tips, really appreciated

My r33 and my r32 and 300zx came in now i ordered my tools this so helpful man thank you

Saved to my fav list for reference thanks for putting together

very detailed workmanship..well done

Excellent video! 👍🏻

Thank you very much for this detailing great video!!!! You help me a lot!!!!! 👏👏👏👏😉

Cool build,really good video for beginners

I just recently started to watch your videos to start this hobby. I can't wait to try my first model car. Need to watch a few more to know what to buy to start out. Any pointers would appreciate it. God Bless!

What a guy amazing just ordered my first build a can’t wait

The painting process is simple unless you are like me and buy a white car as your first model and you spray white paint on white plastic, they you cannot see where you sprayed and where you didn't. I'm currently finishing it and the tutorial is one of the most helpful things i ever watched 👍👍

I use Meguiar's #06 Professional Cleaner Wax as it is silicone free and does not harm paints. Some waxes or polishes have silicone and can damage the paint. Your video is a must watch for all builders, new and old. Thanks

Very nice ive always fancied the evo 3 GSR BODY THAN THE NEWER TILL 6 BUT IV HAD ALMOST ALL EXCEPT THE 3 GSR THE ONE UR DOING NOW i definitely have to get one love the raised evolution on sideskirts

You helped me a lot with it I'm new and didn't know where to start I made the mistake of getting a amt but I think I know where to start a bit painting wise

I suggest putting the tools that have rust on them into vinegar for a while because that removes rust

It’s easiest way to build a car, it’s a following these steps to build a car and build these parts.

Terbaik la bro..Makin semangat nk main mokit lepas tengok video bro..sangat2 membantu

Thanks man I am getting my 1 24 Nissan GT-R R32 soon this help to give me ideas thanks alot.

best video ever buddy respect from greece

thanks this is great info im really excited to get into making car models are there any good kits that have most of the hobby tools needed

Hi there! Im your fan from Sabah. I wanted to start building 1/24 and your video helps a lot! I hope I can be as good as you! Keep up the good work and cheers! :D

*Great tutorial!*

Very nice jdm👍

This is really good !

i watch this because it is Evolution 3 ❤️ jadi semangat nak belajar. terima kasih bossku 👍🏻👍🏻👍🏻

Fantastic!

Nicely done.

IThanks dude this was helpful because me and my dad have ordered rx7 and a 87 thunderbird, you made it simple, most of the vids I watched skipped through the important stuff so thanks,

Damn nice job on those cars.

Thanks for the tips! I'm mostly an armor builder but I would like to try some cars.

Thx for the tips I own aoshima nissan silvia s12 btw

Yeah wow thanks, i'm really grateful for this, it's a huge help

I saw Rm40!!! Hello fellow Malaysian!!!!

Thank you for this video, ive always been interested in model cars but never really the time, im having shoulder surgery end of month so i decided to buy 3 model cars and a model RC car, with all the materials it gets a little pricey, especially not knowing if i should Spray everything or paint everything but A combination of both does seem best. Thank you again for this video I watched multiple times Now its time to go build one of mine and refer back to this video when needed lol

Great work, as of righting this just hit the subscribe Butten fantastic work.👍

Awesome jobs

Get a pen drill and slot the brakes rotars, use thin wire to make you own suspension, fishing line to use under the hood for plug wires and such. The little details set a kit off but I will say you are a master with spray cans haha not many people can paint like that with them. I just picked up an airbrush last week and ive been practicing with it before I use it on a kit.

I am thinking of working under the pre-painted AE86 Trueno from Aoshima,since i have problems with painting😅 But still the video is good tutorial for every begginer

Great video to watch and learn, going to start getting into plastic modeling myself. Unsure about those accent lines though

Keren bro,, vidio nya sangat membantu skali buat pemula.

Heres a little tip if you want to paint smaller details, dont cut them iff the board immediately, this will make it easier to paint the smaller pieces without making a huge mess :D

beautiful

Thanks for the video. Learned alot. +1 sub

nice build, keep with the good work :D

wow this helped a lot thank you :D

Well done 👍

Many thanks, it'll help a lot

the only thing to make it better would be narration. As is, it is very good for anyone not just new guys

I am looking to build my dad's top fuel dragster from scratch to give to him for his birthday!

Thank you veeeeery muuuuuch

Hi, Thanks for this first and foremost. A couple of weeks a rush of blood to my stupid brain made me buy a Tamiya 1:12 model kit. I didn't know what I was getting in to and the shop didn't tell me how difficult this is and what skill you need for this. I have learnt some stuff from watching this video but you are very experienced. There is no substitute for that. The questions I have for now if you can help are as follows. Do you think I should just use spray paint cans (tamiya) and not air brush? The instructions don't tell me when to glue parts together so I am baffled as to how to keep the model from falling apart. Lastly should I use primer? Please help if you can. Also your videos are great because not only do you learn about scale models you also learn about general car painting principles. Thanks for imparting your knowledge. It's great benefit to us all.

you have to have surgical precision for this , mines shake so much my wipers end up on the roof. you should really consider being a surgeon , great job!

Terbaikk bossku

Thanks for this video. Very informative and useful for someone like me who wants to get into the hobby. But I have to ask, the panel lines in some of the pictures are thinner. Did you use alcohol or anything of that sort to thin it out?

Suoerb modelling.So nice to have the panel lines.Often forgotten. Great upload.

カッコイイ‼️

thank you teacher :)

Thank you

Subbed right away. Great video most helpful. I had a question about your experience with different glues. I see you use uhu general purpose glue for larger parts. I have testors. Have you ever used testors glue is it safe? Iv had plastic shrink/melt with it sometimes. What are your thoughts for other glues other then uhu. Thank you ☺️☺️☺️ great video very helpful.

Great tutorial. Especially using spraycans. You can get get nice results. Patience is key, thin layers. Contrast with the black panelliner is a bit much on the white imo. Do you have experience with a grey panelliner? Just starting building again and have to buy some basic stuff.

I just came across your videos yesterday and I love them. Subscribed right away. One question, I notice on this one that you place your decals at the end. Most builders place them before clear coat. Do you maintain your same process even on decal heavy builds? Do they adhere long term over the wax?