My pleasure! Thank you so much :))

Thank you so much for your wonderful words. I'll do my best for you :))

Thank you so much for your incredibly kind words! I'm thrilled to hear that you find my guidance helpful, and I'm glad to share in the joy of crafting with you. Happy crafting, and thank you for your kind encouragement! 😊

My pleasure! Thank you so much :))

Thank you so much :))

Thank you so much, my friend :))

와, 정말 감사합니다! 영상이 힐링이 되었다니 정말 기쁘고 뿌듯하네요^^ 더 나은 콘텐츠로 찾아뵐 수 있도록 노력하겠습니다. 행복한 가방 만들기 계속 즐겨주세요~^^

제가 더 감사합니다~^^

Please visit our website for more information about this bag. Thank you so much :))

충이야? 잘지내고 있어? 형이 놀러 가야 하는데 여의치가 않네ㅠ 고마워~~^^

O prazer é meu! Muito obrigado :))

우와~ 감사합니다! 도움이 되면 정말 좋겠어요^^

Muchas gracias :))

감사합니다. 열심히 하겠습니다. ~^^

Oh, my friend! Where have you been? I've missed you so much. Thank you for coming back to me.:))

I've just been busy lately around the house😅... Btw happy new year my friend.. I wish you prosperity and more successfully in this year.. Can't wait for another stunning leather work🎉

It sounds like you've had a busy time around the house! 😅 Thank you so much for your New Year wishes! I appreciate your kind words and wish you a fantastic year filled with prosperity and success as well. I'm excited to hear that you're looking forward to more stunning leatherwork. Cheers to a wonderful and creative year ahead! My friend 🎉😊🌟

Thankyou 🙏Seonsaengnim..

Muchas gracias :))

Thank you so much for your kind words. I'm so sorry I deleted the video because of copyright issue.

Thank you so much, Joseph! I'm delighted that you found it helpful. Your kind words mean a lot. I wish you a blessed Christmas and continued success in your endeavors. Merry Christmas to you as well! :))

Hello, Thank you so much for your kind words. I hope the description below is helpful for you. How to create and apply adhesive patterns: 1. Apply glue(Chloroprene glue) to the backside of the pattern. When applying the glue, make sure to spread it roughly rather than thinly, as this will enhance the adhesive strength. For this purpose, a type of glue commonly used in leathercraft is rubber cement adhesive. 2. Allow the applied glue to dry thoroughly for at least 5 minutes. If it is not fully dried, it could potentially damage the leather. 3. Attach the pattern to the leather and perform cutting and punching as required. 4. Slowly remove the attached pattern when it is no longer needed. ★ Caution ★ This method is not suitable for vegetable-tanned leather. Since each leather type may have different characteristics, conducting a test beforehand is essential to ensure the best results. ★ Reference link ★ kzfaq.info/get/bejne/aLCClZmSrL_TkX0.html

Thank you for your kind words! I appreciate your interest in my work. You can sell bags made from my patterns on a very small scale, as long as you are not reselling my patterns themselves. Happy crafting! :))

Hello, please check our website for the detailed information about materials. Thank you :))

Моє задоволення! Щиро дякую за теплі слова :))

Thank you so much. When I had spare time, I worked on it bit by bit, so it took quite a while. I haven't actually calculated the exact time it took me to make it. The time it takes to make it can vary from person to person. I tend to be meticulous, so it takes me longer :))

우와~ 감사합니다~^^ 예쁘게 완성하시길 응원하겠습니다! ^^

Muito obrigado :))

Hello! It seems that SL is only available for purchase in Korea. For a similar material, you can use a hard-type leather of the same thickness. :))

칭찬 너무 감사해요^^ 가죽은 뒤집기가 가능한 소프트 계열 가죽이면 다 가능합니다~^^

Thank you so much for your kind words. The lining is herringbone patterned fabric :))

Hello, my friend. I'm sorry for this version, the bag should be finished with piping. I'll prepare to finish it without piping in the next version.:))

@@studiohael Please dont be sorry, it is just myself who prefer a different finish... Thank you for sharing as always.

Thank you for your understanding, my friend :))

I recommend soft type leather such as shrunken cow leather.

Xin chào, Cảm ơn bạn rất nhiều vì những lời tốt đẹp của bạn. Vui lòng kiểm tra mô tả video hoặc nhận xét cố định. Bạn sẽ biết cách mua mẫu.

아... 요건 뒤집기를 하셔야 되요ㅠ 나중에 뒤집지 않는 버전으로도 한 번 제작해 보겠습니다~^^ 감사합니다.

I used double-sided tape, cut to a width of 4.5 mm.

안녕하세요. 먼저 영상을 항상 시청해 주시고 패턴을 구매해주셔서 감사합니다. 패턴을 구입하시고 만들어 보셨다니 정말 수고하셨어요. 제작 중에 발생한 문제에 대해 속상해 하시는 마음을 알아채니 저 또한 마음이 아프네요. 지퍼를 열 때 뒤집어져서 지저분하게 보인다는 문제에 대해서는 글로만 읽어서는 제가 정확히 어떤 부분이 문제인지 이해하기가 어려운 부분이 있는 점 양해 부탁드려요. 가능하시다면 해당 문제가 발생한 부분을 사진 몇 장 찍으셔서 저에게 메일(studiohael267@gmail.com)로 보내주시면, 충분히 검토하고 성심성의껏 도움을 드리도록 하겠습니다. 물건을 만들면서 발생한 어려움은 누구나 가끔 경험하는 일이며, 그런 상황에서는 함께 해결하는 것이 가장 중요한 것 같습니다. 말씀해주신 부분에 대해 함께 좋은 결과를 이끌어내도록 하겠습니다. 다시 한 번 수고하셨고요, 메일 기다리고 있겠습니다. 감사합니다~^^

빠른 댓글 감사합니다. 메일드렸습니다.

What specifically are you inquiring about regarding the item that was placed inside the bag?

인쇄하는 프린터기 말씀하시는 거에요? HP Officejet Pro7720이에요~^^

The glue is Chloroprene glue. Thank you :))

@@studiohael thank you so much 😊

It's Leather Board. You can use Salamander or Salpha instead of LB. They are almost the same material. :))

감사합니다~^^

I'm sorry, but you will need to purchase this pattern :))

Bu çantanın deseni ücretsiz değil; ücretli bir model.

Thank you so much :))

Thank you so much. I'll do my best for you :))

@@studiohael You are Most welcome honey Boos ...Im from Malaysia

Wow, I've always wanted to visit Malaysia, so I'm thrilled to learn that you're from there! Your warm comment has really made my day. Thank you so much! :))