Jigs and Fixtures #1

Рет қаралды 13,070

2 жыл бұрын

This series of videos will focus on jigs & fixtures...some may be well known, but I'm positive that many will be novel! More of this series to come...I'll show the finished result(s) if available, and as always...I'll be showing a lot of tips and tricks along the way! Thanks a ton!
(Shown at :35) Drawings with dimensions for Hold Down Clamps can be found here: ramonvaldezfinefurniture.com/...
Build a veneer sled like this! (shown at 8:38) I don't have plans for it, but check out the video here to see more:
• Perfect Veneer Seams!
Belt Sander Dock shown at 9:23...an extremely versatile and very useful jig! Purchase plans here: ramonvaldezfinefurniture.com/...
The incredible Dock for the Festool Domino! Teach your Domino new tricks! (14:39)
DF 500: ramonvaldezfinefurniture.com/...
I also have the Dock for the larger XL 700: ramonvaldezfinefurniture.com/...
Make your own shim jig...and you can make beautiful, practically free, perfect shims that can taper to a whisper of a point...and use up all of your scraps! Shown at 14:59:
ramonvaldezfinefurniture.com/...
Check out my Instagram for constant tips and woodworking tricks of the trade:
/ ramonartful
My website: ramonvaldezfinefurniture.com/

Пікірлер: 52

@t.e.1189 10 ай бұрын

I said it before and Ill say it again. I'm amazed at how much I've Iearned from watching your videos. I've too love making and using jigs & fixtures. You have some great ideas I plan to put into practice. Now on to watching the next video in this series.

@ramonartful 10 ай бұрын

I don’t ever get tired of hearing this! Thanks for the feedback!

@hankgriffis9668 2 ай бұрын

Thanks for sharing your knowledge! Absolutely the best channel for learning!

@ramonartful 2 ай бұрын

I sincerely appreciate that! Cheers

@essextwo 11 ай бұрын

I have a similar eyelet screw from a vintage Christmas tree holder that stays by my drill press because I’m lazy and never found a use/place for it. Now I can tell people it was my plan all along to use as a horizontal drill guide when I go manual. Thanks 😎

@ramonartful 11 ай бұрын

I don’t use that trick often but when I do, man, it works amazingly well! Thanks a ton for watching

@ivantodorov9136 2 жыл бұрын

Great video man! Cheers and greetings from Bulgaria!

@ramonartful 2 жыл бұрын

Bulgaria! That’s cool to hear. Welcome to my little shop! 🙏🏼

@antonoat Жыл бұрын

It's very obvious you've learned from your "real" experiences, priceless really! Thanks for sharing all you do!

@ramonartful Жыл бұрын

Thank you! I appreciate the good words

@douggilchrist5131 2 жыл бұрын

I've enjoyed watching all of your videos in the past and I admire your ability to think of, make and use fixtures and jugs. I love that one time jigs are simple and easy to discard afterward, and the long term fixtures and jigs are built with the same attention to detail as your furniture projects. Nice job Ramon.

@ramonartful 2 жыл бұрын

Thanks a lot for the feedback!

@gcp02006 2 жыл бұрын

As always, you’re a boss

@ramonartful 2 жыл бұрын

Ha ha…thanks !

@Mr_Rick 2 жыл бұрын

Thanks for sharing Ramon.

@ramonartful 2 жыл бұрын

Truly…thanks for checking it out!

@cdbflynow 2 жыл бұрын

Yes, many good take away items in this video. Thanks, Paul

@ramonartful 2 жыл бұрын

Thanks for letting me know…I appreciate the feedback!

@brenon4766 2 жыл бұрын

This is going to be gold!!

@ramonartful 2 жыл бұрын

Thank you. I’ll have more going into this series.

@binershock 2 жыл бұрын

Love these videos, so packed full of content, learn things every time

@ramonartful 2 жыл бұрын

I love hearing that. Thanks a lot !

@davidbedrosian1567 2 жыл бұрын

Jigs and Fixtures - you're talking my language!!! That was a great video with all kinds of fabulous ideas. Your attention to the smallest detail is fantastic. For example, the idea of leaving the fence board on your wedge jig a bit long so you can be sure the board is tight - great stuff. Thanks Ramon

@ramonartful 2 жыл бұрын

Thanks David! I dig the details that you pick up on!

@jaykepley5238 2 жыл бұрын

Really cool and useful jigs. Thanks for sharing your knowledge.

@ramonartful 2 жыл бұрын

Great to hear…thanks for the feedback!

@kiwdwks 2 жыл бұрын

Thanks...so awesome!

@ramonartful 2 жыл бұрын

Great to hear…Thank you!

@thomasalison6188 2 жыл бұрын

Great tips!!

@ramonartful 2 жыл бұрын

Thanks!

@joejr.971 2 жыл бұрын

Thank you so much Ramon, videos are educational as always. really appreciate you sharing

@ramonartful 2 жыл бұрын

Thanks! I really appreciate you checking em out!

@ramonartful 2 жыл бұрын

I really appreciate you checking em out!

@k11s22my 2 жыл бұрын

Thank you Ramon! So much information here, would love to make some of it.

@ramonartful 2 жыл бұрын

Glad you like! Much thanks.

@chrispcall 2 жыл бұрын

You're the best!

@ramonartful 2 жыл бұрын

Ha ha…I’ll take it! 😬👊🏼

@shawnkirsch 2 жыл бұрын

Loving the new intro!

@ramonartful 2 жыл бұрын

Thanks man…I try to keep it short and get on with the info! 😬

@michaelcoceski5442 2 жыл бұрын

No doubt clever jigs, well presented. Greetings from down-under. Subbed.

@ramonartful 2 жыл бұрын

Thanks a ton for the feedback! And welcome!

@erikneedham2526 2 жыл бұрын

Will your inserts fit a k700?

@ramonartful 2 жыл бұрын

I don’t believe so. Mine are 22 13/16” long (579.4 mm)

@brenon4766 2 жыл бұрын

Why the 4 degree angle on the planer outfeed extension?

@binershock 2 жыл бұрын

Was wondering that myself. It looked like the end of that cast iron table was tapered back a little towards the bottom but hard to tell

@ramonartful 2 жыл бұрын

Yes…it’s called a draft angle typical of cast iron pours. The angle helps the pieces release. Thanks

@brenon4766 2 жыл бұрын

@@ramonartful Ah, so the outfeed is flat with the extension with this adjustment?

@ramonartful 2 жыл бұрын

@@brenon4766 yes...exactly flush. Thanks

@duster8100 2 жыл бұрын

Can you please put the phone in landscape mode to avoid the annoying narrow view with huge black lines on each side. this will make the videos much nicer to watch.

@ramonartful 2 жыл бұрын

Yeah I know. Sometimes all I have is older footage in portrait mode. Thanks