The reason for the skin cuts and splits was probably because the microfibers were soaking up the sweat and oils from the players' hands. When skin is exposed to really absorbent material or distilled water the oils gets sucked out off the skin, and skin gets prone to cracking which is really painful. I work with distilled water alot and dry skin or skin cracks are a common occurrence.
@AwesometownUSA Жыл бұрын
hey I work with distilled water a lot while making dyes and inks for artwork, and my fingers always end up dried and cracked - there are other chemicals involved though, so I never suspected it was from the water itself…
@andresmartinezramos7513 Жыл бұрын
@@AwesometownUSAdistilled water is surprisingly nasty
@Lord_zeel Жыл бұрын
My thoughts exactly. The ball doesn't cut you, but it's like juggling silica gel packets all day. They ended up with really dry skin, and dry skin getting repeatedly impacted is a recipe for cracking and bleeding. It's probably not something you would even see from anyone that wasn't a professional practicing for many hours daily, but for NBA players this is their life so they were handling these things constantly.
@sipenarekbecha7193 Жыл бұрын
I thought water (yeah the distilled water) repels oil (including sebum) ? 🤔
@TheWritersMind Жыл бұрын
Good shout, this also probably wouldn’t have been picked up during mechanical testing of the ball.
@AnonyMous-eq7iq Жыл бұрын
They'll add a perforated leather cover to the outside. It would keep the same feel and aerodynamics as the current balls but wouldn't need inflation. Adding solid leather would make air pressure involved again so perforated is the way it'll go
@jaydeleon695 Жыл бұрын
That's what I was thinking too. Make it slightly smaller and lighter then cover it with leather and tell no one; see how many people notices. That could also solve another problem aside from aerodynamics and feel which is the moisture it'll pick up when used. With that many holes I doubt the officials can keep that thing dry throughout the game; good luck getting all the sweat, water, drinks of any kind out of those holes.
@AAGEnzee Жыл бұрын
@@jaydeleon695 I'm less concerned about liquids as I am solid stuff. You can spin the ball and the majority of liquid would come off from inside. Sure, it'd still be 'damp' but I don't think it would really effect it too much, and you could switch to a backup ball while it dried if it was really an issue. Heck, rinse it under some water, then set it aside to dry and it'll be good. However, imagine something like a tiny pebble/rock getting pushed through the hole on a bounce and then rattling around inside it. Granted, it's less likely in an arena vs playing outside, it's still possible. Popcorn kernel falls on the edge of the court from fans, the ball picks it up as it's dribbled over it, etc.. stuff like that.
@sprawlz6466 Жыл бұрын
You'd have to cover it carefully. Reducing the total surface area that the air inside can escape while the ball is compressed (bouncing) actually will give it an air pressure component. So they'd have to cover it with leather, but not block the holes at the same time. That would probably take more years of testing. And seeing as how they already spent the time to make the ball with the holes perfect, I honestly doubt they'll alter the outside surface of it. I'd also be willing to bet that no one is gonna like how it feels lol. It's gonna be the same thing as 2006.
@imabirdo Жыл бұрын
cool idea but they want to avoid using animal products (I think) too and the synthetic stuff got shut down... one thing I am certain those balls won't have good wear and tear for street ball much less playing outside in the rain.
@milosknezevic8905 Жыл бұрын
I am Wilson ! And all of you are hired!!!
@theprogressivemichigander6588 Жыл бұрын
If it can be cheap enough, this would be great for lots of sports. With Wilson, tennis balls come to mind. You can't reinflate them so it's a pretty significant expense and the bounce changes a lot with the temperature. Soccer balls would be nice too. I would have appreciated a ball that didn't need inflating as a kid.
@Wingnut353 Жыл бұрын
That's the thing... 3d printing per unit is much much more expensive than normal mass production methods. And very time consuming per unit as well.
@sleepingtom9337 Жыл бұрын
They’ll cost like 250 for one
@OrdinaryLatvian Жыл бұрын
@@sleepingtom9337 250 what, Yen?
@adafrost6276 Жыл бұрын
@@Wingnut353 SLS printing can be used fairly effectively for smaller scale runs of things, like making balls for schools and some high end customers. If it catches on then, they would switch to injection molding for a wide scale release.
@maslelviz Жыл бұрын
The thing is that this new ball is essentially a piece of plastic with a bunch of holes in it. Imagine this thing flying at full speed into your face. That's a big nope, especially for soccer, where you have to hit it with your head.
@willpina Жыл бұрын
I bought one of those new official 2006 balls when they first came out. I believe I paid about $150 for it. I love that ball, still have it. It has a much better grip than the other balls, specially for someone like me that has average size hands, but I agree that it becomes slippery when wet and also after a long shoot around, my fingertips would feel kinda tender. But it is more consistent and accurate, specially for bounce passes and bank shots off the back board
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@Mastermind4life Жыл бұрын
Why Would You Say Something So Controversial Yet So Brave?
@benamisai-kham5892 Жыл бұрын
I just used to love the softness of it hitting my palm. After a bit of use it just became perfect for hand feel (yes very slick but otherwise I honestly loved it) I loved tossing it between my hands and spinning it across my palms. My brother had the ball, I think it's still at my parents house in my dad's garage. I also remember those weird slightly more bulbous basketballs with more inset lines that got weirdly popular about 08
@ganiniii Жыл бұрын
150$😂 and the leather was changed for a much cheaper material. I bet I known why they tried to push that ball so much.
@moddable6921 Жыл бұрын
I much prefer the 2006 balls over leather ones personally. They are way more consistent than leather balls in my opinion and are more resistant to the general wear and cracking that leather can experience after some time of use
@PumpkinBreath Жыл бұрын
Evolution basketballs 🏀 were the best.
@ddennis2430 Жыл бұрын
Are the best
@mcray0309 Жыл бұрын
I own one and I 100 agree
@ItsCrawdaddy Жыл бұрын
Facts, I found an almost brand new evolution at a Good Will once for like $8. They had no idea what they had. That shits like $70 new lol
@kandypaints Жыл бұрын
@@ItsCrawdaddyno way
@ronaldswanson333 Жыл бұрын
@@ItsCrawdaddy that’s a steal😂😂😂
@spiderface9179 Жыл бұрын
The additive manufacturing (3d printing) technique they used for this ball is one of the less common ones but has still been around since the 80s. Selective laser sintering. It makes sense for this application as it doesn't need support structure and can print in a wide variety of materials even metal. A stereolithography printer could also probably print this geometry but they can only print in less flexible resins
@eljoho62210 ай бұрын
extremly expensive, if they keep using this tech they will never make that ball commercialy possible.
@spiderface917910 ай бұрын
@@eljoho622 wrong
@eljoho62210 ай бұрын
@@spiderface9179 go try and print a model that big using Laser sintering. I own some 3D printers myself, with FDM or SLA it will cost you a few hundred dollars. Laser sintering is a hell lot more expensive. Additive manufscturing may be good for prototyping but when it comes to mass production it isn't good enough.
@n161618 ай бұрын
@@eljoho622it’ll be commercially possible, it’ll also just be expensive. I really don’t know who or what this ball is for. I guess to reduce waste of basketballs after they wear out. And it looks cool. Except it won’t look as cool when it’s covered like it should be for a smooth but grippy feel. Is basketball waste really a priority for this planet? That really something we need to solve? Popping basketballs is really that big of a deal?
@TruthJX Жыл бұрын
I don't know if there has been any expressed intent to replace the league's balls with these. To me, the whole airless ball project kind of seems catered towards individuals, namely outdoor players. When I hear "3D printed basketball" I think of a ball that is cheap to produce. I may be wrong about that, because I know the production of these balls is much more complex than the 3d printing we're used to. Still, it would be really dope if this ball does end up being an ideal choice for outdoor players. A cheap ball that requires no maintenance and can be replaced easily.
@salvadorromero9712 Жыл бұрын
I know there's a *huge* push from tire companies to develop noninflatables. It would be a huge leap forward--maybe not as revolutionary as the move *to* inflatable tires and balls etc. in the late 19th century but huge nonetheless. It really seems more a matter of when than if at this point. We'll see them on military and industrial craft, competitive racing craft, consumer craft, sooner or later and probably sooner than we might think. They will certainly have solved the "pebbles getting stuck in them" problem more crucially than the basketball folks, whatever that solution might be!
@kingdingaling2469 Жыл бұрын
This ball is lame af Spalding makes the best B Ball
@MickeyMouse-lm6zj Жыл бұрын
it would arguably be the worst outdoors
@WumboMing Жыл бұрын
You wouldn’t be able to hoop outside with this ball. The wind would effect the shot and pebbles would get in the holes
@jaybird634 Жыл бұрын
Until a rock gets stuck in it !
@jacobvestering4197 Жыл бұрын
Microfiber is great at cleaning. It will clean the oil right off your skin. Drying skin out, causing it to crack.
@ashemabahumat4173 Жыл бұрын
Just dont replace the balls outright, host games out of season or side events like a layup or dunk challenge to gauge the feel and performance of the balls, as well as player feedback. That way, you can actually _test_ it without forcing such a drastic, random change onto the players
@Allhavengames11 ай бұрын
im sure they would never switch NBA like that. too much on the line to abruptly change the ball it would be practice and off season first. im kind of curious to try it though
@Vespyr_8 ай бұрын
People are so afraid of change.
@erueka68 ай бұрын
@@Vespyr_no there's a reason things sometimes don't change it's called wisdom and experience used be common and we respected the people who had it our elders now we have the 2 retarded generations who denigrate and belittle them and look stupefied and cry in pain when asking why it blew up in their faces.
@ryanjohnson45657 ай бұрын
Swap it out without anyone knowing. Then tell them a year later. Film the reaction and make a commercial. Rake in the dough
@Vespyr_7 ай бұрын
@@ryanjohnson4565 Bro. It looks like a honey comb lol.
@cloudy5504 Жыл бұрын
to fix the issues of finger nails and things getting caught and aerodynamics just use it as a core and put leather on the outside.. easy.. airless but essentially the same feel, grip, all that
@Palozon Жыл бұрын
I want a series of show matches with the ball. The potential aerodynamic quirks could mess players up, but with practice it could also raise the skill ceiling and introduce variety and specialization in the same way that the different clay, grass, and hard courts in tennis do. Different balls, different techniques.
@keiyakins8 ай бұрын
Plus, doing some extra matches with it is a good way to test the ball under real world conditions before committing to changing the league.
@devn266 Жыл бұрын
I’ve always loved Wilson way more than Spalding. Their Evolution ball that everyone uses at the HS & college level feels amazing.
@PaLoHQ Жыл бұрын
This ball is perfect for poverty areas, I recall a different company did a unpopable soccer ball. This could be used that way, in conjunction to be a featured in the NBA one day.
@Lola23339 Жыл бұрын
I kept 3 of the 2006 balls. I actually liked playing with them. Even if this new ball is exactly like the current one, there's a psychological issue at play. The current balls are fine so, in my opinion, there's no sense in changing them.
@mattiasbystedt1332 Жыл бұрын
I agree. The balls weigh the same so I can't imagine it being a good environmental choice either. That's the only reason I could see.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@jacobg6528 Жыл бұрын
Absolutely no reason at all to change them. We need to stop fixing things that aren't broken
@m0rthaus11 ай бұрын
When businesses create a solution for a problem that doesn't exist, there's always something else at play - usually, money. Either the replacement product is cheaper to produce at scale than the original, or they're hoping they can trigger a fad and sell everyone a new ball. The only thing that loses out for sure is the environment.. instead of using natural leather and rubber (though I know petrochemicals are involved in most modern basketballs), they're moving to pure 'elastomeric polymer' balls - essentially a combination glue and plastic, probably carbon fibre and other components too. You can guarantee it's not recyclable, and likely non-decomposing. Thanks, Wilson.
@MrKevin48611 ай бұрын
Its prolly considerably cheaper for them to produce, thats why. Profits.
@mohnjarx7801 Жыл бұрын
Those holes will act like seams on a baseball. Depending on how you grip and release the ball it'll do all sorts of weird things
@grabthememesandrun1204 Жыл бұрын
Interesting. I wonder if that would allow players of all sizes to palm the ball. Could even the playing field, or fuck literally everything up
@mohnjarx7801 Жыл бұрын
@@grabthememesandrun1204 maybe it will level the playing field by fucking literally everything up? lol
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@generalmisery Жыл бұрын
There are also these rubber balls that are just terrible. A new one roughs up your hands. We used to spin in in our hands for hours before we were happy to use it. It did perform equally, but why not use the leather one to begin with. I think that might be a similar problem with the new one. Having hard edges is not good. I am also concerned about dust inside the ball. They would most likely build up stuff inside like hair and skin particles. While balls are dirty on the outside, you can't clean the inside causing it to be filthy after some time. You also can't put cloth on the outside, because it wouldn't bounce as well, so you can't fix the problem. Neither do I trust that it would bounce after laying in a corner for 4 years like air balls do. Remember, NBA balls are usually the standard that everyone uses including kids.
@Poekuli Жыл бұрын
I want to see something like this for tennis, I know that Wilson triniti balls are pressureless and I enjoy them. But it would be awesome considering how quickly balls get used up. Obviously it will be very difficult to keep the same spin but I hope one day I won't have to switch out old balls
@Luigi777888 Жыл бұрын
You think shock injuries will ever be solved?
@gaius_enceladus Жыл бұрын
As the video touched on, the aerodynamics of this ball would probably be *very* different to the existing ball, with some air going into the inside of the ball. That would *have* to affect its flight characteristics. It looks great, sure, but looks are a lot less important than "feel" and performance - bounce and flight.
@ince55ant11 ай бұрын
also when it spins all those holes each create drag.
@davidarmstrong3964 Жыл бұрын
Gonna be great for schools and after school programs. Under inflated balls kill the vibe when you’re trying to play pickup games
@El_Goblino_ Жыл бұрын
I have a tip for you put the thing into the ball and simply pump it 🤯
@davidarmstrong3964 Жыл бұрын
You have never not had a pump or tip handy? What a life you live my friend. Always having an inflated ball and a sarcastic asshole. The whole package.
@jake_of_the_jungle9840 Жыл бұрын
I remember in school they had both old and new kinds, the new kind felt disgusting I can’t describe it but just the feeling of those balls annoyed me.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@davidgeiger Жыл бұрын
The most interesting thing here is the materials and manufacturing tech, that’s one hell of a material if it can withstand those forces and deformations for a decent lifespan, I can see this being used for all kinds of next gen protective gear.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@darketernal3 Жыл бұрын
When a sphere with holes like that spin, there's going to be drag. To stop the drag, you'll have to close up the holes, or make them small enough where airflow isn't going to be an issue. Then to fix the texture, you'll have to wrap the ball with the same or similar leather. Then to prevent dust and water buildup contaminating the interior of the ball you'll have to prevent things from entering the holes, either by plugging it up or having a one way hole design. In order to prevent the air being ejected out in a one way hole, you'll have to ensure there's enough air that enters and remains inside the interior. Congrats, you just created the current leather ball.
@rks545711 ай бұрын
Lmfao exactly what I was thinking. It's like these people never seriously played basketball. They forgot the most important aspect of the game which is shooting. And when a player shoots a jump shot they will put backspin on it with a flick of the wrist. It can be the difference between a swish and brick. That seemingly small difference in trajectory will really stand out in a game where each team can take a 100 shots per game.
@ince55ant11 ай бұрын
they're literally trying to reinvent the wheel, but in 3D this reads like NBA people are getting paid for wilson to increase profits with a cheaper, worse product. if they were serious there'd be years of testing at more junior level games before even thinking of asking top teir professionals to touch the thing
@NoobsDeSroobs8 ай бұрын
There will always be drag, and it is not game breaking changes. Some divits are often used to reduce drag, and holes can provide a different path for air reducing the air volume being displaced by the ball. It will change, but that is just a matter of getting used to it again. Dust and water buildup will not be a problem as the thing is filled with holes. Because there are many holes, having too little air inside the ball is a non-issue. You are just making problems where there are none. There are changes and challenges, perhaps too big ones, but no obvious breaking problems.
@Mykyta_Palamarchuk Жыл бұрын
As a non-profesional occasional player - I would buy. It looks so cool as it is right now, without the perforated leather, if they are planning to add it later. I will probably strip off the leather coat, if there will be one, as soon as I buy one. 😅
@matthewblue1158 Жыл бұрын
The wild ass broken finger caught me off guard 😂😂
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@oliverhardin1413 Жыл бұрын
8:48 "yeah write something on that whiteboard behind you" *ah yes, the ball goes into hoop*
@jaymaledic5730 Жыл бұрын
The ball looks revolutionary and... hideous. Also, if it bounces off someone's drink/beer, its inside would be one heck of a job to dry off.
@MADDlSH Жыл бұрын
dish washer homie
@JaeDee66 Жыл бұрын
@@MADDlSH I think they meant during a nba game.
@DudeMcGuybro Жыл бұрын
@@JaeDee66 Switch it out. You think they really bring just one ball to the game? lol
@lucidstudious750 Жыл бұрын
This could work if they add a layer covering the holes. It needs to feel and play EXACTLY like current basketballs, but with a different inside Edit: y'all are having a great discussion in the comment section about this
@evosioa2944 Жыл бұрын
fr
@ricorite5617 Жыл бұрын
But then it wouldn't be airless
@John-pp6xy Жыл бұрын
@@ricorite5617 I mean he's saying make it without holes, so no it'd just be hollow no need for air since its 3d printed
@juanpablogarcia9309 Жыл бұрын
@@John-pp6xy and what is the hollow part filled with?
@4purs Жыл бұрын
@@juanpablogarcia9309ou know you can make a hollow structure without filling it with pressurized air right. An “airless” ball is just a different material all together that keeps its shape without air inside, it doesn’t have to be filled with holes. It’s just easier to 3D print if it is. They could cover it with a leather wrap or something to make it feel like a ball, but it’s definitely FAR from being able to replace a real basketball
@invisalats841 Жыл бұрын
There is a good chance the perforation would lend itself well to the current 3pt Era. The players would need at least a full off-season to practice with it though. Also another person mentioned coating it with perforated leather, which would probably help maintain a certain comfort level with players.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@opman3393 Жыл бұрын
At that point why not just keep the current ball. It feels redundant to attempt to replicate something if you already have it; especially if there is no real issue with the current one.
@spacegoatable Жыл бұрын
@@opman3393 Still wouldn't be inflated
@reganes Жыл бұрын
I can't wait to pick one of these up to play on the outdoor courts around the corner from our place - I agree, I think this is the market for this. The comment in the video about the changing flight of the ball is valid, but we contest with the wind altering the path of the ball as it is now, arguably one with holes might be less affected by strong wind shifts? So pros and cons either way. Still they look very cool - I want one. 🙂
@Blackcat-yc5mu Жыл бұрын
What about Little Rock’s that can get inside?
@xiaoxiaojuzi0225 Жыл бұрын
I'm more concern about those lil rocks that get stuck inside.
@gillegan7189 Жыл бұрын
@@Blackcat-yc5mu im sorry but how stupid do you have to be to think this? If rocks can get in they can get out. If it can fit through the hole it will just fall out
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@Bound2BeatU Жыл бұрын
I just really don’t see what the problem with the original was like sure it has air pressure “issues” but it just seems dumb to me.
@tkspiderman23 Жыл бұрын
Great vid!!! I miss those evo balls
@glasscrafter669 Жыл бұрын
My only issue is being plastic as it ages. It gets brittle you have to soak them to keep them simmy the right consistency. Over time
@VenomTNT Жыл бұрын
The plastic polymer used is an industry secret, but from research im doing its something probably similar to PA12, which is quite durable ngl. It also absorbs moisture very well.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@Its-Just-Zip Жыл бұрын
Sports Dynamics aside because I don't play basketball and I'm not sure why. I'm watching this video because I don't have much desire to really watch basketball, but this is interesting. I actually got to work with either a predecessor or a related model of the 3D printers that Wilson is using on these basketballs in college. We used the powder 3D printers to make robotics parts that had to be consistent across the entire surface but for one reason or another we couldn't use resin they printed extremely consistently, which was surprising considering it's a bed of powder. Despite my lack of interest in the sport, I'm interested to see how this new basketball goes and I'll probably follow the NBA for the first little bit when/if they introduce it, just to see what happens.
@AveryBlackman Жыл бұрын
That magnetic ball has revolutionized three point shooting for Steph Curry. 😢
@RavivLadaga Жыл бұрын
😂
@realnametunji6605 Жыл бұрын
I have a idea use more thicker alligator skin for the Wilson ball. Add bigger holes for more ventilation, but also use crystals in the inner core layer for equal gravity but also depth
@Skeletor-hl9jd Жыл бұрын
And also cover it in spikes that way it's easier to catch
@isaiahdaniels5643 Жыл бұрын
And put a jet engine on one end for easy 3 pointers and glass shattering dunks.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@efraim6960 Жыл бұрын
add a gyroscope at the center
@realnametunji6605 Жыл бұрын
I’m thinking more of AI ball eh? Like with Siri installed
@liontigeman2353 Жыл бұрын
every time I see the Seattle SuperSonics I remind myself oh my team is not at home anymore and then search for hours for any talks for Seattle to come back in the NBA.
@jobieheiser443 Жыл бұрын
I dont think they intend for the ball with the holes to be the final product, its just the inside of the ball, like the rubber bladder they use now. They just take this new ball, slap the leather outside on it from the old ball, and voila, all the problems you just stated are solved. It looks the same, feels exactly the same, and flys exactly the same way, and its still airless.👍
@ince55ant11 ай бұрын
na its just the grid, otherwise there would have been a single example of this skin in use, which there isnt, because they want to make as cheap a product as possible that requires as little human involvement as possible
@jobieheiser44311 ай бұрын
@@ince55ant Or maaayybbe it's just a prototype, and not a finished product 🤦♂️
@l.a.rodriguez9581 Жыл бұрын
Why is the ball not orange? Athletes are notoriously superstitious and if the ball is black or white, it’s a non-starter. I’m not saying they’ll accept an orange wiffle ball, but that’s part of it.
@YankeeD23 Жыл бұрын
They're basically just advertising these balls to the public. If they act as if their new ball is truly something to be considered for professional use, it implies that it is a good product. (Which has actually yet to be determined). I imagine the NBA's ball would remain orange no matter what it's made out of. Though it wouldn't look as nice as the traditional balls do in orange. The color of the prototypes were black and white, probably because a bright orange ball would make their product look even tackier. With that said, I doubt that NBA players will ever approve the use of this wiffle ball. Change the ball, and you change the sport.
@TeamStudNation1280 Жыл бұрын
@@YankeeD23 what about brown?
@YankeeD23 Жыл бұрын
@#TeamStudNation1280 Who knows. They could also make them multi-colored like the Euroleagues balls. They've got lots of options and potential. We'll see
@meh7348 Жыл бұрын
That ball that was ripping up fingers and whatnot, literally only done to save money yet i can only imagine how much was lost having to bail on it lol
@fernandoquintana2476 Жыл бұрын
Got a Spalding Legacy for Christmas and end up with cuts on my fingers all the time.
@iamthevince501 Жыл бұрын
Also that ball looks like a bitch to get hit by. A regular wilson, spalding or molten ball already hurt if you get hit hard i can't imagine getting the equivalent of a 12 oz plastic water bottle hitting me at basketbal speeds it would affect rebounding, stealing or even shooting because it can cause a lot of confusion due to the haptic cues shooters use to line the ball up with their hands
@DudeMcGuybro Жыл бұрын
The 06 ball was like shooting with sandpaper. Awful feeling texture.
@Allhavengames11 ай бұрын
as someone who played for years including high school. the feel of the ball is huge to me. so switching that up after years idk. I would have to try the new one and see how it feels to shoot and feel the grip
@godisadude2 ай бұрын
Great job bro. I got a better inside from your old video even though you haven't tried the ball that from most current reviews of the first gen airless. Keep it up
@Frank7489 Жыл бұрын
I’m wondering if you play in different places, the ball should feel different due to elevation, humidity, air pressure. If this new ball isn’t inflated, it wouldn’t have most of those issues
@nsahandler Жыл бұрын
The issue with this logic is that balls are inflated and tested before the game, on-location. Elevation and temp will not affect a rack of balls that are inflated and tested that day; Internal psi is consistent if the environment it is inflated in is consistent. What you are saying WOULD matter IF the ball was inflated somewhere else then MOVED to another location with significant ATM and TEMP changes that would create variation in psi. Source: dive master. psi and atm are literally life or death.
@nsahandler Жыл бұрын
Ex. If you inflated a basketball at sea level, it's psi will be higher in the mountains. If you inflated a basketball in winter, during the summer it will be hard as a rock. You can also do this with water bottles while driving through the mountains.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@yuukifenia1611 Жыл бұрын
One point to me would be that while they're trying to reduce variance in air pressure, that's what makes the games fun and interesting. It also does not mean the worse player wins as the better player noticed and adapts faster. It shows off more skill. I feel like that's a factor that'll come back in years where we can't go back but wish we could. Also it DEFINITELY will affect the shooting and arcs especially with all of those air pockets. I am curious to see if there's a new kind of throw or arc it'll have compared to normal ones.
@yuukifenia1611 Жыл бұрын
@@obscuretenet yeah the fact that he delivers consistently regardless of a so called inconsistent ball. Almost like you're commenting on a video about redesigning a basketball and getting snippy about someone talking about the design of a basketball 🤣
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@human-ft3wk Жыл бұрын
@An Obscure Tenet Last season's games had amazing ball air pressure statistics, don't lie
@ryanwarner5006 Жыл бұрын
This is in no way what makes the game fun or interesting. It's in fact the opposite.
@rks545711 ай бұрын
@@ryanwarner5006yeah, I'm not trying to see the best in the world struggle and try to adapt to some new technology lmfao. I'd go back to college and watch lab students if that were true.
@keegankadi624 Жыл бұрын
i think its a good concept if they put a wrap of some kind similar to leather on it to stop the change in air distribution from a typical leather ball that was previously superior in performance
@NORMIES_GET_OUT8 ай бұрын
I wonder if you could make the new ball curve like a wiffle ball. Would be cool if players could start making crazy curve shots/passes by adding spin.
@Mommythief0069 Жыл бұрын
The new basketball should go through rigorous testing before even getting into a game but if the time necessary is taken it could be a great thing
@BADASS668 Жыл бұрын
U don’t think they are going to do that lol
@isaiahdaniels5643 Жыл бұрын
What's the major flaw with the old ball though? The fact it needs to be precisely inflated? It just doesn't seem like it's worth changing the whole design over.
@Ghost-fc9hw Жыл бұрын
@@isaiahdaniels5643Significantly cheaper to produce and maintain
@vlada Жыл бұрын
Great thing for consumers? Probably not. The ball companies aren't going to produce outdoor balls that will last longer or be cheaper. Great things for NBA pros? Definitely not. After all that testing you're going to have to go a generation of youth that grew up with that ball. The only benefit is that a 3d printed ball doesn't demand a workforce (you know those dirt poor countries where the big sports brands go to a worse place where they can pay kids even less) so the manufacturers can save lots of money by getting rid of their cheap labour. It is a great thing for manufacturers.
@nickyoung6031 Жыл бұрын
That open design might be good for playing outside, to reduce how much wind effects the ball
@GGE415 Жыл бұрын
When you think about it ; the teams usually agree on what ball to use, at least in pick ups
@gokhan44618 ай бұрын
The concerns about holes are completely understandable, but it doesn't need to have holes. You can produce it with eight panels and "stitch" them together, it's a relatively easy adjustment. They can also cover it with a leather like material. I think they made the design this way to draw attention and show off the capabilities.
@Guyonnn Жыл бұрын
The cuts from the ball sounded fishy to me. Glad to see the university found the same. But I had no idea all this happened. Interesting video.
@rumham7631 Жыл бұрын
The ball wasn't cutting their hands, it was drying their hands out(it was wrapped in a microfiber material) which made their hands significantly more susceptible to cuts. When I worked in a grocery store my hands would dry out from opening cardboard boxes. They would crack all the time which had never happened before and hasn't happened since.
@AlphaDwg Жыл бұрын
I want to buy one of these
@P4NCH1 Жыл бұрын
I want to try it as is it now! I'm not optimistic as to NBA changing to that as the regulated one, manly because of aerodynamics (I can see it giving great changes on long shooting due to its perforated and hollow nature), none the less, I really think it would be interesting to play with that ball.
@MyRealDelusion Жыл бұрын
there is absolutely no reason to mess with what we have
@Clutch180 Жыл бұрын
Idk.... I think it'd be pretty interesting to see someone "curving" their shots or passes around the court. Imagine a side-winding shot curves horizontally around the hand, and the resulting spin against the backboard arrests the reflected momentum.... just ... drops in the basket. Or maybe like an aggressive Sandy Koufax sinking basketball shot. Looks like it's about to hit the back board on a frozen rope and then just Turns on the rocket engine and bolts downwards through the net.
@jakubkrivanek3112 Жыл бұрын
Natural leather is an unique material. With sweat from your hands it becomes sticky instead of slippery. I can't see any composite doing the same while being bouncy and cheap at the same time. The whole air pressure and bounce is a nonsense. Sure temperature changes the bounce of a leather ball, but you can allways inflate or deflate it to make a correction. With airless homogenous composite, temperature will change it's bounce, but there will be no way of correcting it. And third, there is that thing with holes. Gym floor can be a messy place whatever you do. Hair, fibers from cloth, dust particles, everything is there. NBA courts may be cleaner than your local gym, but still. Those holey balls WILL soak all the hair and fiber on the ground inside and there will be no easy way to get it out.
@reganes Жыл бұрын
Won't it just come out of the same holes it soaked into?
@toututu2993 Жыл бұрын
I like the non air pressure ball idea but not bunch of holes. They need to cover it with something that can last playing outside
@christianmarrero3205 Жыл бұрын
It's for the nba not to play in the streets
@toututu2993 Жыл бұрын
@@christianmarrero3205 But it'll be even better if is designed to play in both
@Powermongur Жыл бұрын
@@toututu2993 Rocks can hit the holes edges and the ball will bounce unpredictably.
@VenomTNT Жыл бұрын
@@christianmarrero3205 Not necessarily, at all actually, theres not really a market option for a top of the line basketball that doesnt have extremely durability issues when playing outside. It is also puncture resistant which is massive.
@ziegfeld4131 Жыл бұрын
@@Powermongur you dont clean your court off before playing?
@benvolio28 Жыл бұрын
This is a perfect example of a company or designer creating something that doesn't need to be changed. No NBA player asked for this, no player is complaining about the changing air pressure
@subn0rma111 ай бұрын
Right. These professionals are extremely skilled because they've spent thousands and thousands of hours practicing, ever since they were little kids. Then you go and totally change that tool that they've been honing their skills on? Why? No one asked for it, and no one wants it. The ball is fine. Just leave it alone.
@g76agi8 ай бұрын
@@subn0rma1Imagine if people talked like this about formula Take a step back and listen to how ridiculous you sound, please.
@BuddaBakes Жыл бұрын
"The creator of basketball was just a PE teacher" Dr. James Naismith (NAY-smith; November 6, 1861 - November 28, 1939) was a Canadian-American[1] physical educator, physician, Christian chaplain, and sports coach, best known as the inventor of the game of basketball. -Wikepedia
@average-osrs-enjoyer Жыл бұрын
Your point being? They were correct in the video?
@feras04 Жыл бұрын
Pretty much a PE teacher
@VashStarwind Жыл бұрын
I wonder how sturdy that material is. Like can you stand on it like you could a regular ball? Something to think about.
@roobear53577 ай бұрын
I hope they don’t think too much about it, and just take your advice and stand on it!
@mikehunt9884 Жыл бұрын
i know this probably would be difficult to do, but the way you introduce something as game changing as a new ball type, you cannot ask already established NBA players to just go with it. You have to start raising the upcoming crop of players to use the ball from the beginning, that way they're used to it by the time they reach the NBA. Personally i would agree with the video, If it aint broke, don't fix it. The composite ball was just a way for the NBA and Spalding to save money. Now the NBA switched company, from spalding to wilson, so now wilson wants to justify their job, kind of like when a new manager gets hired at a new place and starts just changing stuff that don't need to be changed.. So wilson comes up with this horrible airless ball.. which is the dumbest idea ever..
@user-db9jg9kr7i Жыл бұрын
The key words are "game changing" not many people want the game to change, because they love it how it is.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@nicknett8 Жыл бұрын
I much prefer Wilson over spalding the nxt once broken in is my favourite ball to play. I find Wilson balls bounce better too
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake..
@newinhuman Жыл бұрын
balls bounce different depending where you are... sometimes you get more bounce, sometimes you get more vibrations. Airless makes a lot of sense but how will it shoot?
@krish.p20 Жыл бұрын
i would love to use the ball but my question is that would the grip of the ball be the same as the normal ball like the one used today
@SlavkoStorm Жыл бұрын
Probably not, big holes are everywhere.
@ltzp2 Жыл бұрын
One big concern I have is that there really isn't a way to get this to perfectly replicate how an inflated ball bounces and withstands force. I gotta think if someone lands on this thing its gonna flatten out, and then where do they go from there. Do they have to call a timeout to fix it? would it even be fixable?
@Saik0 Жыл бұрын
If someone lands on a basketball hard, could just break their back... this thing will likely just deform until it breaks. But the answer to your concern is that you just keep extras on hand.
@leethetree264 Жыл бұрын
it will just pop back into shape. and should prob cushion someone falling lowkey
@blablup1214 Жыл бұрын
I guess for matches they will just have multiple balls ready....
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@ryelor123 Жыл бұрын
While I don't like sports, this video was recommended and I have to add this: its a game. This isn't some factory process where efficiency is the most important parts. Consistency is important in sports because it allows you to compare players over a long period of time. As such, they shouldn't be changing things like this.
@theloyalwraiths88278 ай бұрын
Funny, that's the exact same argument for a new ball. Two rectify the inconsistencies of the old one.
@drtaverner Жыл бұрын
I wonder why people think this would lack grip or air resistance. 1: It's clearly not hard like a PLA or ABS plastic. It would be more like a kind of TPU or Silicone plastic, which would absolutely grip and bounce. 2: When the ball is in flight it's usually spinning. The dimples on the surface alter the aerodynamics of a leather ball. This ball would behave similarly while spinning. In fact I expect that, given practice, the larger spaces will give players even greater control over longer distances.
@hufinnpuff3068 Жыл бұрын
There goes the three point line. Aerodynamic is big in long shots and passes.
@SoFresh415 Жыл бұрын
Plot twist: it improves 3 point percentage instead
@jaymaledic5730 Жыл бұрын
@@SoFresh415 They'd have to exert extra effort to throw it. No more logo shots.
@omgvague Жыл бұрын
Just shrink the holes on the inside to get the same effect as dimples on a golf ball. That would create air pressure allowing the ball to travel further with back spin.
@taylor-worthington Жыл бұрын
It cannot be exactly the same, especially to seasoned pros who molded their precise skills with the old balls. Assuming such a change, it would take years for players to grow accustomed to the inevitable, crucial differences. Conceivably however, those differences would just become new aspects of the game and skillset. It seems a little archaic to be using animal skins.
@isaiahdaniels5643 Жыл бұрын
Right, the grip is going to be way different. That edge between grip and slide during a shot is now going to depend on where your fingers might be between holes.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@vlada Жыл бұрын
If you're eating the cow, you might as well use the leather.
@WolfHeathen7 ай бұрын
This is the perfect example of why you shouldn't attempt to fix what isn't broken.
@Teknakill7 ай бұрын
THIS IS STUPID. (not you, the video)
@nekomekoplays Жыл бұрын
I watched the whole video and I fucking laught so hard at the end at the "Go ahead and check out what happens when you disrespect Lebron" 🤣🤣🤣
@jorgklatt396 Жыл бұрын
Man… this ball is so solving a non-problem 😅
@jamirimaj6880 Жыл бұрын
Exactly. Where the referees are much bigger problem in basketball.
@lakerfan2874 Жыл бұрын
I still play with a Spalding Peja Kings basketball from the 2000s. I don't really want to switch from it because I like the smoothness of the ball and the weight is heavy for good strength training on your shot and dribble moves. This plastic ball isn't too innovative since anyone with a 3D printer could make it, but of course, branding is gonna be the outlier here.
@loadingshutup Жыл бұрын
nah cus if you watch the original 3d printed basketball trailer, ur gon see that the ball is laser cut from some sort of sand object in a special very expensive 3d printer
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@tomboysupremacist Жыл бұрын
it's laser sintered, it's not like a normal FDM 3d printer
@noahcooley2003 Жыл бұрын
the sound of the ball bouncing won’t ever be the same get this spaceman ball outta here
@classic.reviews Жыл бұрын
Never thought I’m gonna watch a video about balls to the end
@EAZYDOESIT Жыл бұрын
LIES THAT MAN AIN'T INVENT SHIT 😂😂😂😂😂
@BamaNinja227 Жыл бұрын
Thanks for liking my comment and great vid
@locoattack1210 Жыл бұрын
I love videos where the main topic only gets brought up 60% of the way through the video.
@bowgart5567 Жыл бұрын
the new holed ball i think could be fixed if they made the holes smaller, it would have the airless thing they want, and less air would go through the ball while shooting idk if they would make that and its probably too hard
@meinardsl Жыл бұрын
Is it NBA ready? Probably not. Outdoors pickup game? Sign me up.
@donwinston Жыл бұрын
Almost all of the complaints about the composite ball were bogus except maybe the "slippery when wet" issue.
@duaneharper6095 Жыл бұрын
No. I used one I bought one. No. The ball was terrible and every time I took it to the hoop court it maybe only got used once.
@James-9999 Жыл бұрын
Could be the ultimate outdoor ball tbh
@paullastnamehere32958 ай бұрын
Here is a thought. Make the circumference of the 3D printed ball smaller. Then wrap the ball in the same leather of the current ball to match the current dimensions. An even better thought would be to scrap the whole thing.
@eisernfront8549 Жыл бұрын
NBA players: them ballz feels cheap and it gives me injuries. Ancient Mayan and Aztecs: hold my ancient ballz
@OwenWithAHammer8 ай бұрын
You can't 3D print a ball, this is insane. 1. 3D printing is asymmetrical, if you drop one ball, and another rotated 90 degrees, they will bounce to different heights. You cannot 3D print an object that bounces the same height at any rotational orientation. 2. Elastomers deform over time, you can pump up a basketball and check the air pressure very easily, 3D printed balls will lose bounce overtime and you can't just pump more air into it.
@kwmcgreal Жыл бұрын
How come no one is talking about sound??? I mean, sure handling is important but what about that satisfying resonant slap against the court....? (I am kind of not serious but I immediately thought about that
@arturodelarosa2002 Жыл бұрын
I don't see the MBA transition to this going very smoothly either. If at all. But this product if it can be made cheaper than currently could have a place within consumer market. A ball that never deflates sounds like a grate feature for a garage basketball or a school gym.
@kamilmusalat Жыл бұрын
I didn’t even know Wilson is doing the official nba balls lol never noticed it 😂
@bryanbrowning9294 Жыл бұрын
This is a horrible idea. If it ain't broke then don't fix it
@Alphoric8 ай бұрын
There’s a reason leather has been used for thousands of years and still is used. Leather is also very grippy and is why you can get leather gloves
@Mololo11 ай бұрын
Constant rubbing of finger crevices on the cuts are going to produce hard patches on the player's skin, that are going to produce stress cuts and burns.
@GoddaryuTUBE11 ай бұрын
the only problem is the holes, not being smooth will affect handles and aerodynamics.
@mikejones-nd6ni6 ай бұрын
A problem I don't hear about and a Big one in my opinion is the sound or lack thereof. Idon't like it because the sound of the dribble plays a Big part and without that if you don't have eyes on your taking away a very useful benifit that these new balls can't have. If it ain't broke don't fix it. They're trying to fix a problem that doesn't exist just to make money. This is only good for people to use indoors
@fulailakram57455 ай бұрын
It's probably like the airless tires we've been seeing for decades now. Always there, but never arrives
@M60gunner1971 Жыл бұрын
A solution to a problem that didn't exist. 😂
@robertkb64 Жыл бұрын
That’s just Selective Laser Sintering, that 3d printing process has been around almost as long as 3d printing has been. You can even get desktop versions now for under $20k
@The_Queen_Chrysalis8 ай бұрын
They could keep it airless, just have a hole at each of the intersecting lines, nothing too big, just enough that it can always maintain it's inside air, even maybe add internal core webbing to it to maintain it's shape so it never has a moment of being "lopsided"
@TommyJonesProductions Жыл бұрын
With the holes, you might see some curved shots, depending on the air resistance profile.
@biggooba6706 Жыл бұрын
lmao if you not a complete moron your know that the balls have technology in it to fake the games all mainstream sports are fake.
@jorgesanchez5097 Жыл бұрын
Actually Kobe Bryant RIP said that he liked the improved grip. He thought it gave better grip for handling the ball.
@christenn32 Жыл бұрын
Why the need to constantly change things? If it ain't broke, don't fix it.
@TheN8ism Жыл бұрын
I hate it when companies feel they need to “innovate” for the hell of it. It’s a recipe for disaster especially when it comes to something like a f-in ball
@shineonnent.7951 Жыл бұрын
I would change the courts and make them like giant monitors have hot spots pop up special efffects appearing under players doing well sync everything with the new digital backboards it could be amazing