DIY vacuum clamp / stand unit

Рет қаралды 600,680

3 жыл бұрын

Hello friends.
This is the official channel of JSK-koubou.
Here you can find many interesting videos about homemade machinery, woodworking projects, plans and life hacks.
Click here for the plan
jisaku-koubou.com/downloads/v...
I have created a vacuum clamping system that can clamp materials quickly.
It utilizes a device that evacuates using compressed air.
The device that creates the vacuum costs only $ 15.
The vacuum area is 13.9 cm x 13.9 cm
The ultimate vacuum of the vacuum equipment used is -92kPa.
Theoretically, it is possible to chuck with a force of 179 kgf.
It can be adjusted to an angle that is easy to use, and the clamp does not get in the way, so work progresses.
Since it uses a rubber sealing, no clamp marks are left on the wood.
[Plan List]
jsk-koubou.stores.jp/

Пікірлер: 445

@jisakukobo Жыл бұрын

I hope you will share my videos with your friends!

@theMerzavets Жыл бұрын

Shure we all share that! 🙂 Think I can say that for all your subscribers and watchers. Can you explain how this great thing works? On the first seconds you are showing pressure from the pipe, not vacuum.

@Denchik_1974 Жыл бұрын

@@theMerzavets I had same question. Rewatching this video for second time i've paid attention there is some conventer air out to air in.

@elek984 Жыл бұрын

@@theMerzavets Vacuum ejector or Venturi pump.

@davidkal9083 Жыл бұрын

Sure we share! What about to share link of The device that creates the vacuum? thanks!

@smelyi_alexey 11 ай бұрын

@@elek984🤝

@matthewrigsby4502 3 жыл бұрын

Is it just me or does JSK have access to the most beautiful plywood on the planet?!? I don't believe I've ever seen one blemish or imperfection and the plys are always free of voids, too. JSK, you're a phenomenal craftsman; thank you for all your videos.

@christianifversen4031 3 жыл бұрын

I have the same thought every time. It would cost me the equivalent of high quality hard wood to get that fine ply

@i.buchmueller9171 2 жыл бұрын

Afaik the wood for Japan has a higher quality standard (compared to us and Eu). This would explain it.

@carterscustomrods 2 жыл бұрын

@@i.buchmueller9171 indeed. It's actually tougher to find lower grades than the higher grade stuff. Then again this was when I was last there, 15 years ago, so it might be different these days.

@adrianscarlett 2 жыл бұрын

Looks like regular Baltic birch ply to me. Not the cheapest but not excessively expensive

@hectatusbreakfastus6106 2 жыл бұрын

@@adrianscarlett Yeah, that's what I was thinking too.

@Rockhopper1 3 жыл бұрын

finally something you do that sucks, and its beautiful

@dleivam 3 жыл бұрын

Brilliant

@BuildiTDIYIsrael 3 жыл бұрын

I keep being amazed regarding how clean your work is. no mess, no fuss, no nothing that should not be in the shot or on the bench, it is a pure pleasure to watch.

@paulwestlake4278 3 жыл бұрын

Once again, I’m completely impressed. A most excellent fixture.

@christopherwheeler688 3 жыл бұрын

I look at the chaos in my workshop and I'm embarrassed at my amateurish wood-hacking compared to the sublime perfection of JSK's work. Artistry in woodworking.

@darkfactory8082 3 жыл бұрын

Geez, every time I'm looking this guy build something, it gives me goosebumps.. It's that slow and sure build style and like a sterile room feeling. Brrr.. Anyway, hats down to the master! =) I know japanese carpenters are known for extreme diligence, but still I'm actually surprised of the precision level he achieves.. =o ... with wood... Cheers, Mr. Jisaku, keep on the excelent work!

@Micha-vf1xn 3 жыл бұрын

Deine Projekte sind nicht nur kreativ und genial, sondern auch so schön meditativ. Danke dafür

@acl4734 3 жыл бұрын

Once again, Jisaku, has surprised us again with a great idea, brilliantly realized. Once again the genius and the mastery of know-how, put into action. A higher level. Thanks again, Jisaku.

@djjinerson 2 жыл бұрын

This dude is flat out amazing…..I can’t believe his level of ingenuity. That thing is amazing 🤩

@sagguharjit88 3 жыл бұрын

Dear Sir Brilliant Idea You won't speak in the video but your work and actions speak itself.

@MatterLabz 3 жыл бұрын

Brilliant! I was very impressed, then you added the smaller oring for a smaller space. Fantastic idea. You are very talented. Thanks for sharing.

@marciobernardo8985 3 жыл бұрын

Os teus projetos são sempre geniais e inspiradores!

@user-mc2vd4bu1v 4 ай бұрын

No chatter, no annoying background music - just the project and the work that goes with it - everything in complete peace and relaxation. Your videos have an almost therapeutic effect for a craftsman. A big movie theater !!! Keep it up !!! I follow you :-))

@coulterjb22 3 жыл бұрын

That is so amazing. Craftsmanship+elegant simplistic design is a true art form. You are an artist!

@Koszmarek78 3 жыл бұрын

Wspaniały projekt. Super pomysł i mistrzowskie wykonanie.

@adamntrace 3 жыл бұрын

This clamping jig is absolute genius 👌👌👌

@user-jk9iz1ex4t 3 жыл бұрын

Супер!!! Очень аккуратно. Made in Japan.

@BartekEVH 3 жыл бұрын

I have not words. Genius!!!!!!!! Amazing!

@wagnersoloviow6789 3 жыл бұрын

Trabalhos fora de série como sempre,parabéns!

@XerosXIII 3 жыл бұрын

No words, only action. Great stuff

@MrPatdeeee 3 жыл бұрын

Wouldn't that be great IF every DIY'r did this? I get so bored of worthless rhetoric that is nothing but waste. In a word, "CUT TO THE CHASE".

@sohilronagh286 3 жыл бұрын

うわー！あなたは真のイノベーターであり、熟練した職人です。あなたのスキルを共有してくれてありがとう、そしてあなたに多くの敬意を表します。 Wow! You are a true innovator and a master craftsman. Thank you for sharing your skills and much respect to you.

@maitanikazu 3 жыл бұрын

すご〜い！JSK-koubouさんのジグは制作工程も美しくて、見惚れてしまいます。ほんと素晴らしいです。唯一の不満は、レベルが高すぎて真似できない事（笑）

@crisaghemo 3 жыл бұрын

This is awesome! Been wanting something like this since I saw the festool vacuum clamp in action (and then saw the price of the thing). Thanks so much! For those (like me) who didn't know what that valve device was, it seems to be a venturi vacuum system. The physics of how it works are pretty nifty.

@dennisspeer8077 Жыл бұрын

But noisy

@uban7322 3 жыл бұрын

まず真空クランプなるものの存在に驚きましたがそれを自作してしまうなんて…本当に尊敬というか畏怖してしまうレベルです。素晴らしい！

@Dr.OdayNafiSalim 3 жыл бұрын

Your videos are soothing to the soul ... Wait impatiently for your creativity at all times ... thank's alot for sharing

@arzainc1 3 жыл бұрын

There is nothing to say... this is perfect...brilliant as usual... so Zen to watch.

@claudiogarcia8860 3 жыл бұрын

¡Uno de los mejores videos! ... ¡one of the best videos ever! BRAVO

@raimundweinstein7690 3 жыл бұрын

Es ist wirklich sehr beeindruckend welche tollen und praktischen Dinge Sie erfinden und herstellen. Besonders die Präzision mit der Sie arbeiten ist ein hohes Level der Ingenieur Kunst. Mein Respekt

@anacmlemos6069 3 жыл бұрын

Congratulations! Your videos are great. Your work is very clean. Thank you for sharing.

@BraunBruno-br5jm Жыл бұрын

👌Sei una montagna di idee, impressionante e precisissimo nei lavori ... sono meravigliato. Complimenti.👏👏👏👏

@Hottabych6262 3 жыл бұрын

Выдумщик какой. Молодец! Лайк!

@Tibrovich 2 жыл бұрын

С фестула слизал ,есть такой заводской вариант.

@osnelli 3 жыл бұрын

This project is so brilliant, congrats on that

@adelkeryakos2641 3 жыл бұрын

Absolutely fantastic 👏👌😀👍as always. Thanks!

@Patrick76150 3 жыл бұрын

Bonjour, Quels soins, quelle propreté ! Tous les outils me semblent de "créations maison" ? Félicitations ! Et j'aime à admirer les personnes, qui comme vous, travaillent à la perfections ! Félicitations ! De cordiales civilités Patrick (FR)

@rerod 3 жыл бұрын

Brilliant instructions, so eloquent.

@youtukang 3 жыл бұрын

👍👍👍

@jackboot3946 3 жыл бұрын

A picture is worth a thousand words...

@ransouthall3497 3 жыл бұрын

Now I want to see a vacuum table for your cnc router. 👍

@mor8266 Жыл бұрын

Another ingenious idea. Thank you so much.

@josejmourente 3 жыл бұрын

JSK-koubou ,otro trabajo perfecto, felicidades

@gianpierobecciu9608 3 жыл бұрын

Grande idea e, come sempre, ottima realizzazione... Complimenti!!!

@bayonamaderojesusdavid218 3 жыл бұрын

EXELENTE VIDEO, SALUDOS DESDE COLOMBIA.

@diegohurtadobedoya4168 3 жыл бұрын

Que genio eres. Muy buena herramienta. Gracias. Saludos desde Medellín Colombia

@sddiymakeitworthit7512 3 жыл бұрын

Amazing presentation 👍

@frauk3383 3 жыл бұрын

Und wieder mal...absolut perfekt

@MCsCreations 3 жыл бұрын

Pretty fantastic idea, dude! Well done!!! 😃 Stay safe there with your family! 🖖😊

@viorsa8200 3 жыл бұрын

Cómo siempre excelente proyecto muy bien desarrollado y mejor ejecutado , un sistema muy práctico y limpió , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 😜🤓🤣

@mantynen80 3 жыл бұрын

This idea is a cream out of cream. Well done!

@Richard-wk9le 3 жыл бұрын

That little black tube he brings in at 0;33 is a Venturi vacuum pump they work by blowing a stream of air past a small port like a carburetor sucks air/fuel out of the bowl of a carburetor, I just have never seen one in the USA. JSK neat trick well done.

@SuperSpecialty 3 жыл бұрын

I purchased one from a vendor while work @PHNSY... I connected it to a 1” air hose which turned into a nonelectrical vacuum that was 30yrs ago!

@Struthio_Camelus 3 жыл бұрын

McMaster-Carr carries a variety of them starting at $11.40

@NotQuiteFirst 3 жыл бұрын

Thanks, I was wondering what that was and how it seemed to reverse the flow from the compressor. I was assuming it was just magic.

@karlgriff8 3 жыл бұрын

I was wondering how he did that thank you for the explanation 8m usually pretty good at working it out but that one I'll have to admit caused a little brain hurt lol

@brettus9115 3 жыл бұрын

It's a Pisco VUL05-66A or variant of that depending on size

@SCarrera4 3 жыл бұрын

Чувак - ты гений!!! 🧠

@josedias4664 3 жыл бұрын

Ótima ideia parabéns, muito prático muito bem feita.

@Pho8os 3 жыл бұрын

Your channel is on a whole other level! Awesome design, exquisite execution.

@marcosandrade5215 3 жыл бұрын

Muito boa vossa criação, parabéns. Você é um gênio.

@walterrserrano 3 жыл бұрын

This is great!! Brilliant concept and very well executed!! 👏🏻👏🏻👏🏻

@user-nz1ew2fy2m 3 жыл бұрын

エアコンプレッサーで気体圧縮したものが、あの小さなアタッチメントで吸気側に変わるのが初めて知りました。プラスチック製品の熱造形とかにも応用出来そうですね。

@pascalperrin-bonnet7119 3 жыл бұрын

J'adore vos projets qui déborde de simplicité et d'ingénieurité

@sylvaind.6786 3 жыл бұрын

Ingénieurité 🤣🤦🏻‍♂️

@pascalperrin-bonnet7119 3 жыл бұрын

@@sylvaind.6786 la classe je vais faire secret story je pense lol

@Mutex88 3 жыл бұрын

I love your videos and your genius creativity. Even I always watch in double speed :)

@uniquelepseudo3295 3 жыл бұрын

not a word but you speak to the whole world and without any borders the handymen of all countries look at you with attention.. thank you pas un mot mais tu parles au monde entier et sans aucune frontières les bricoleurs de tous pays te regarde avec attention.. merci

@craftwiki. 3 жыл бұрын

Гениально, пипец! Уважуха братан!

@ViktorBelka 3 жыл бұрын

Спасибо за видео! Всегда смотрю с удовольствием!

@SergSuchkoffKharkovUkraine 3 жыл бұрын

Не пойму, как переходник вместо нагнетания воздуха делает всасывание? Что за приблуда такая ??? 0:20

@echydna 3 жыл бұрын

Называется "вакуумный эжектор". Штука простейшая до невозможности, делается на коленке. В википедии описан принцип работы.

@ViktorBelka 3 жыл бұрын

@@echydna Только думал ответить. Спасибо за ответ.

@madmurdog7652 2 жыл бұрын

Hi Jisaku, always nice to see your high standard of workmanship. is the inline connection a oneway valve or an exhaust? Please keep on surprise use with VERY good ideas.

@yveswart369 3 жыл бұрын

very good idea to use the vacuum to fix parts. This tool must be very reasonable in price

@nguyenvantu2118 3 жыл бұрын

Om mani padme hum! Anh sáng chế giỏi quá!

@69frankfrank 3 жыл бұрын

absolutely brilliant

@MaybeMaker 3 жыл бұрын

YOU’RE A GENIUS!!!!!!!👏👏👏🔝🔝🔝🔝🍺🍺💪🏻💪🏻

@eljuaco63 3 жыл бұрын

excelente como todo lo que construye, Saludos desde Medellín Colombia

@youtukang 3 жыл бұрын

Hyyfriend 🤝🤝🙏🇮🇩🇮🇩🇮🇩

@user-ue4zi9tf8p 3 жыл бұрын

Здравствуйте. Приятно смотреть, удачи вам.

@DR-nn3ns 3 жыл бұрын

You are awesome. Great idea & good inspiration

@thebrelon 3 жыл бұрын

you're the one who make expensive tools accessible to everyone!

@user-rc1zt5qv7h 3 жыл бұрын

@jacquesdautel3867 3 жыл бұрын

@@user-rc1zt5qv7h ++++---+--+g-g-------3756 --

@kevinarnold7065 2 ай бұрын

It finally happened, jsk split the wood at 15:49! In spite of the careless destruction (lol), these videos are so relaxing and informative. Thanks

@gerkostuff598 3 жыл бұрын

Brilliant! 👍

@laurabarrerablas1831 3 жыл бұрын

Wowwwwww genial para trabajos delicados! Vidrio, cerámicas, ....

@homemadetools 3 жыл бұрын

Nice clean work as always. We posted this video on our homemade tools forum this week :)

@dealf6890 3 жыл бұрын

Always come with new outside box idea.

@louisdeschamps3430 6 ай бұрын

THIS IS A GREAT IDEA ,IT CAN BE SO USEFULL !

@nemsuzwoodwork6046 3 жыл бұрын

OMG , you're Amazing 😲.

@iesomir 3 жыл бұрын

Brilliant solution.

@patricksimons560 3 жыл бұрын

Again amazing work

@wagneralencar 3 жыл бұрын

You are an alien, how can you create so many amazing things? I should patent these inventions and sell to big companies.

@MrPronav 2 жыл бұрын

Крутая идея!

@kittyvisad4754 3 жыл бұрын

👏👏Perfect job ❤️❤️👍🇹🇭

@markhedquist9597 2 жыл бұрын

Just re-watched this video and have come to realize I did not grasp the full implications of this build when I originally watched it. As a result, I am completely amazed buy this build! And, I'm as intrigued as I could be. I'm wondering if a cordless inflator, such as a Makita high pressure 18v or 40v model, could power this system. A cordless, COMPRESSOR-LESS, portable vacuum clamp would be an amazing fixture, if you ask me. Anybody have an idea on this? I'm looking into it! Thanks, as always for your amazing build video, sir. You never cease to invigorate and inspire my creative mind!

@Ronnysunshine Жыл бұрын

Have a look at Izzy swans channel. The new Grabo is perfect as it kicks when at pressure. Game changer

@marcenariahobby7pallet 3 жыл бұрын

Belo projeto top show de bola

@G65t5 3 жыл бұрын

the idea and execution are excellent. 👍 let me offer some advice ... in all protruding frames make a groove 2 ... 3mm deep this will allow the vacuum to spread more easily.

@nopenonein 3 жыл бұрын

The clamping force is dependent on the net area. There are sufficient deep grooves for vacuum. Let me give you advice that making additional small shallow grooves are not necessary in this case. Cheers

@HandlebarWorkshops 3 жыл бұрын

For people in the USA looking to source parts: Amazon sells the "Vacuforce VML1008 Inline Vacuum Venturi" for about $28. It claims to pull 27mmHG (approximately the same as the $65 vacuum pump in the "customers also viewed these products" row). Then you can pick up 10 feet of 5/16" Buna-N cord stock for around $17. This will give 1/16" clearance above 1/4" plywood squares. (Use super glue to attach the ends to each other) You would also need to pick up tubing and the fittings to attach it to the air compressor. Maybe when all is said and done, that $65 vacuum pump isn't so expensive after all.

@DaddyGoFast 2 жыл бұрын

Perhaps but you still need the seals so unless you can get a vacuum pump for 28 bucks, and you already have an air compressor, this is a better way to go.

@RafaTesafil 3 жыл бұрын

Un invento genial!!!!

@alexon2010 Жыл бұрын

What's nice is that the air doesn't come from those super loud vacuums either, does the air in this project of yours come from the compressor? Very cool

@lawrenceogden8682 3 жыл бұрын

brilliant video

@fantasylabyrinth1666 3 жыл бұрын

Love it!

@romeovidalrodriguez7754 3 жыл бұрын

hola me gustó tus video son geniales me encantan

@colinfursman 3 жыл бұрын

Can you provide information about the air compressor and how to set it up ie. what is needed Regards Colin

@jemo_hack 3 жыл бұрын

You don’t need more than 80 PSI or ~5.5Bar for the Pisco Venturi Vacuum generator.

@petermarsh4993 3 жыл бұрын

A blow that becomes a suck. Now that is clever technology. Could we put one on politicians to convert them to sensible human beings?

@DIMTips 3 жыл бұрын

Am amazing video. Great work

@oscarzamora2911 3 жыл бұрын

Claro esto es muy útil cuando la madera está bien lijada, en superficies irregulares no será efectivo. Al final buen trabajo.

@rrhett2119 3 жыл бұрын

I love the ingenious jigs you build out of plywood. I find the way you extend the use of inexpensive power hand tools particularly amazing. However, we never see you break down a full sheet of plywood into the manageable sized pieces you use in your videos. Your DIY panel saw seems too small. Do you have an ingenious jig for cutting up a full sized sheet? If so, I’m sure I’m not alone in wanting to see it.

@martin8313 2 жыл бұрын

his panel saw is not small, haha. panel saws are for breaking down full sheets.

@stephensneddon1059 3 жыл бұрын

Very very clever...👍🏻🇬🇧

@TyranoReax 3 жыл бұрын

Very ingenious 👍👍👍👍

@ShITHP 3 жыл бұрын

真空なんて作れるんですね、天才ですか。。

@juanjobravo4476 3 жыл бұрын

excelente amigo!

@usuario077 2 жыл бұрын

Excelente maestro 👌. Pero creo que prefiero las prensas por qué me ahorran electricidad 🤔

@electronic7979 3 жыл бұрын

Excellent

@saianjanamuggulu2224 3 жыл бұрын

Excellent 👍👍

@grinpick 3 жыл бұрын

Very cool. I wasn't aware of that device for creating vacuum from a pressure line. To get it to make sense I imagined wind blowing across a chimney. Not sure if that's analogous or not. Overall, I can imagine the clamp stand being very useful to all manner of artisans/workshop-tinkerers. Not sure if you can buy something like this or not. But even if you can, I'll bet most of them would not be as solidly constructed as yours. Thanks.

@obiwanbd1 2 жыл бұрын

It's call a vacuum ejector, it uses the Venturi effect. I just looked it up.

@jaysonofthezachmanfamily8150 Жыл бұрын

hes like me build it your self and it has more value + its 100% better then any junk garbage on the market they build crap these days to last 60 days unless you treat it like its a wine glass!!! very persise in his ways theres no reasion to do anything unless you put 100% in to anything you do... very admirable

@jaysonofthezachmanfamily8150 Жыл бұрын

perfact ive ben wondering what that was thanks!!! bro