JK BMS Screen Comparison and Test

JK BMS Screen Comparison and Test - EXPOSING Problems??

Рет қаралды 3,575

3 ай бұрын

Testing and comparing JK BMS screens connected to the new JK Inverter BMS. Problems identified... can they be fixed with software updates? or is it a hardware fault?
After seeing my review of the JK Inverter BMS, www.lithium-cells.co.za sent the large touch screen to me to test and play around with (I bought the small screens from them about a year ago), and they also gave me four promo codes to share with you, to use on their online store.
They have said there is 10% off for the first 4 people that use the promo code.
Use promo-code BurtonBuilds2024 during checkout.
If anything changes, or they give me additional promo codes to share, I'll update the description or leave them in the community section.
⭐️⭐️⭐️ OTHER VIDEOS ⭐️⭐️⭐️
🧰 Review of the JK Inverter BMS • New JK Inverter BMS Re...
🧰 How to Downgrade firmware on JK Inverter BMS • How to Downgrade firmw...
🧰 How to Upgrade firmware on JK BMS • How to Update Firmware...
🧰 Testing Limits of JK Inverter BMS • Testing limits of JK I...
🧰 Hot to connect JK BMS to SunSynk Inverter • Connect JK BMS to SunS...
🧰 Review of the original JK BMS • New JK BMS and SCREEN ...
The battery used to power the screen is a BlueNova 13v LiFEPO4 battery by the company ‪@bluenovaenergy8352‬ ‪@bluenovaenergy8352‬I purchased this battery a while back and I'm fairly happy with it so far.
If you want to read other reviews or buy one of the other style JK BMS's, here is an option 👉 amzn.to/3yy7lAH (make sure to select the correct model that you need)
My Other Socials 😁 👉 linktr.ee/grantburton
=============================
💰💰💰 Support for my Channel 💰💰💰
=============================
If you wish to support the channel monetarily, please use the links below:
Use Super Thanks on any of my videos
Patreon - / grantburton
Pay Pal - paypal.me/grantburtonbuilds
Any support will be VERY much appreciated.
=============================
✅✅✅ 2024 GEAR ✅✅✅
📷 Camera - Sony A6400 amzn.to/2ErIC5s
🔭 Lens - Sony 18 - 105mm f/4 G OSS amzn.to/3hWwqri
🔭 Lens: Sigma 16mm f/1.4 amzn.to/2ZZeS7J
🔭 Lens: Sigma 30mm f/1.4 amzn.to/2HJcWd7
🎙 Mic: RODE NTG5 amzn.to/361R4nx
🎙 Microphone - RODE Wireless GO II amzn.to/2YZ9PX0
🎙 Microphone - RODE Video Mic Pro+ amzn.to/3jsk7o7
🎧 Audio Recorder: Zoom F6 amzn.to/2HeVGwb
💻 MacBook Pro 16 inch amzn.to/2GlCMTU
🎧 Headphones: BeyerDynamic DT770 Pro (80 Ohm) amzn.to/33kurc9
Soundtracks from Epidemic Sound (Referral link below)
www.epidemicsound.com/referra...
Please help support the channel by purchasing through my Amazon Affiliate links above. When you do, I earn a small commission which helps keep the channel going and you don't pay anything extra.
If you are interested in building your own batteries or learning more about all of this solar stuff, Andy from ‪@OffGridGarageAustralia‬ has a very informative channel with a ton of good information.
#bms #BurtonBuilds #offgrid ‪@EELBATTERY-Miya‬
Burton Builds
S07E03

Пікірлер: 47

@remnl Ай бұрын

thank you for the video. i have a 4.3 screen and didn't know about the always on option. i switched it off and my screen works normal.

@GrantBurton Ай бұрын

Thats good news, thanks for letting us know.

@jeff35372 2 ай бұрын

I just bought 2 of the 4.3 screens and they work directly with a 16 cell 48 volt pack. no need to run a 12 volt power. Therfore when i push the off button the screen turns off, untill i restart the BMS with the push button. I looked at the packaging and can't see any version numbers.

@GrantBurton 2 ай бұрын

Hi Jeff, thanks for letting us know. I think the screen I have is just an old version.

@mondotv4216 Ай бұрын

No - the BMS has a separate DC output that the screen plugs into. I don't think it accepts 48-60V directly.

@DroneSurf Ай бұрын

Mine as well. I have 16S LiFePo4 105A EVE cells and connects directly to the BMS port and power the screen without problem.

@GrantBurton Ай бұрын

@@DroneSurf Thanks for the info 👍

@mandimandi2523 Ай бұрын

me too. have 2 4.3"-screens and they work perfectly with the 16S-power packs... now eel and another supplier came up with vertical and horizontal 16S-boxes where the big screen is now integrated. The information of some chinese shops selling the 4.3" JK-screens that it runs only on 12V is false...

@marcelotronic007 12 күн бұрын

I have the 4.3 panel but the symbol that appears doesn't have this cloud, what I didn't like was the data refresh rate on the display, very slow.

@GrantBurton 4 күн бұрын

Maybe the newer screens have a faster refresh rate? I think the screen I have is fairly old.

@marcelotronic007 4 күн бұрын

@@GrantBurton Infelizmente não, comprei recentemente e a taxa de atualização é lenta.

@maxusboostus 22 күн бұрын

I've got the small screen and it stopped working a few months ago. the button on the side still functions but does not power on the display. Not sure if its the bms or not.

@GrantBurton 22 күн бұрын

Hi, I think this is what I have heard is a common failure with these small screens... especially when being 'always on'. The backlight on the LCD stops working (or at least thats what I remember hearing). I don't think it's the BMS.

@ppi57 3 ай бұрын

Have you tried the inverter BMSs' in parallel, and then try to see them all in PC software v2.7.0? The CAN connection to my Victron Cerbo works well with my 4 JK BMS's

@GrantBurton 3 ай бұрын

Hi, yes, the JK Inverter BMSs are running in parallel and at the same time, I was able to plug in the USB to RS485 adapter and use the PC software to view the data. No settings could be changed but I could see the realtime data for both batteries (address 0 and Address 1). The data seems to refresh every 7 to 8 seconds. The only data that was not working is 'Battery Capacity' and 'Remaining Capacity'... both showing zero on the PC software but showing correctly using the phone app. SOC Percentage shows correctly on PC software though.

@jcgcs 3 ай бұрын

Normal there is only one cable needed to connect the display to the bms. Then the display goes to sleep. I like your reviews👍🏼

@GrantBurton 3 ай бұрын

@@jcgcs Hi Jacco, thanks for your comment. Are you referring to the large touch screen normally having one cable that goes to the BMS? I know the small screen only has one cable but my large display needs to be powered separately... maybe mine is just an older model screen.

@jcgcs 3 ай бұрын

@@GrantBurton Yes, the large touch screen

@GrantBurton 3 ай бұрын

@@jcgcs Cool, thanks for that info... I'm wondering if I cant just connect the power for this screen to where the 'single cable version' gets its power from... I guess the screen will be the same, just a different cable.

@panospapadimitriou3498 3 ай бұрын

Already have it in use and didn't use 12v supply it is supplied by bms and I hope I won't burn it long term.. Bad thing is I can't change monitor sleep sensitivities.. After. 0.3 amps in or out it works or permenantly by app..

@GrantBurton 2 ай бұрын

I came across a PDF document (published on JK's website) about the larger 4.3 inch touch screen... it shows a minimum input voltage of 6v and maximum input voltage of 36 volts. I haven't tried anything higher than 12v so not sure how accurate that claim is. It also claims that at 12v, the screens current draws is 116mA. I've also heard that the 'always on' function for the small screen has been disabled by JK... supposedly because the smaller screens were failing when powered on all the time (I can't confirm this though). The documents for the small 2.5 inch screen indicates that as soon as discharge is greater than 0, the screen will turn on. As far as i remember, both of my 2.5 inch screens (plugged into the Inverter BMS) turn on when the charge or discharge is greater than 0, but they do turn off again after a while.

@panospapadimitriou3498 2 ай бұрын

@@GrantBurton i am sure my 4.3 is half month now connected to bms maybe late version of the older pb series has some kind of converter at the jst style connectors,,, if anything makes a weird smell i ll let ya know... setup reached 57v and will reach a bit more soon.. didnt do propper slow charging high voiltage shutdown yet...keep up man

@GrantBurton 2 ай бұрын

@@panospapadimitriou3498 Thanks very much. I've see pictures of a third type of large screen... it has a power button built into the right side of the screen. Not sure if it's a JK screen or a third party screen that works with the JK BMS.

@panospapadimitriou3498 2 ай бұрын

@@GrantBurton bought it as a jk from their sellers with the inverter bms but used it on a last gen pb or B only !!! so i guess it is jk or they just run out of stock and restock from no name!!!! yup the buton which i m curious of how it operates .. maybe a tiny capacitor in series making more than the voltage it reads.. it blown my last thin voltage sense and balance cable.... i guess it had to do when operate or else my crimping was too bad!!!...

@USA-GreedyMenOfNoIntegrity Ай бұрын

I’ve been og 2 1/2 years with no problems JKBMS the old style and 4.3”

@vetalpeo 29 күн бұрын

As for the screen blinkng problem, I was told it's a firmware problem, so no solution as firmware of the screen / BMS is not upgradeable, at least in the JK B2A20S20PR that I have

@GrantBurton 28 күн бұрын

Hi Andrés, thanks for the comment.

@pyaesoneaung8733 2 ай бұрын

how can I fix that the 4.3inch screen dosent show battery green but show the percentage

@GrantBurton 2 ай бұрын

Hi, I don't really use this large display so unfortunately I'm not sure what might fix the problem... I mainly have the two small screens connected (the 2.5" displays).

@DroneSurf Ай бұрын

@@GrantBurtonjust reset the BMS configuration by selecting the type of battery and setup again your Cells amount and AH.

@SaberToothSL1 24 күн бұрын

hi, i have the same bms but the battery does not show any bars like yours and the charge/discharge indicators are "OFF" even after turning it on from the app. when i turn those two options on the BMS works also and provides power.

@GrantBurton 23 күн бұрын

Are you using the small or big screen?

@SaberToothSL1 23 күн бұрын

@@GrantBurton big one. The battery is just a red logo but system is working and SOC is also shown.

@GrantBurton 22 күн бұрын

@@SaberToothSL1 I'm not sure what could be the problem... I guess it could have something to do with the firmware on the older screens not being compatible with the newer Inverter BMS. I haven't played around with mine anymore... just plugged in the small screens and have been using those and all is working well.

@SaberToothSL1 22 күн бұрын

@@GrantBurton this is the same thing my installation vendor told me. I will be getting a new screen for this as that's the easier thing to do for now than replacing the bms.

@GrantBurton 21 күн бұрын

@@SaberToothSL1Nice… let us know once you get it and if it’s working 👍

@francistj7272 Ай бұрын

Can BMS charge and discharge simultaneously?

@GrantBurton Ай бұрын

Hi Francis, both the charge and discharge control can be set to 'On' at the same time but it can't charge and discharge simultaneously (as in at exactly the same time)... the battery will either be charging or discharging, but it will allow current flow in both directions 'automatically' if both the charge and discharge control is 'On'. I think thats what you are asking?

@PhilippeCJR Ай бұрын

is the display-off issue solved already?

@GrantBurton Ай бұрын

Hi Philippe, do you mean for the large 4.3" screen? I think the screen I have is old because I've heard that other people have newer screens that are powered directly from the BMS, and those don't have any problems.