That's an awesome mod, might do something like that to my jlb J3speed. I subscribed ;-)
@Vanalleswa5 жыл бұрын
There are many better and faster ways to create a small metal bar with 2 holes in it, but i like your mod! I am gonna do that to my cheetah aswell! great idea! subbed.
@peacewithmyself7 жыл бұрын
nice simple and effective
@yenghooitan56663 жыл бұрын
Awesome mod. My screws have bent so badly I'll need to replace them now. What's the name of the tool to hold the bolt in place while you back off the screw (16:21 of the video), and where did you buy it? I'll need to get one now... Thanks for the great video!
@glenwolfe84374 жыл бұрын
Thanks for the info on this! I do have a question. Why wouldn't you drill the holes first before cutting out the piece?
@weswes12947 жыл бұрын
You should put a dual wheelie bar on the back like the newer cheetah
@AndrewKellman2 жыл бұрын
My shock mount (the gold piece) always bends if I land hard on the back. Do you know of a way to reinforce it?
@rcmustsee4372 жыл бұрын
unfortunatly there is no fixing that. you would either need to just buy a replacement (they are very cheap) or see if there is a machined upgrade. the one that comes on the truck is a cheap forged part.
@redeyerocket24234 жыл бұрын
I need new top shock bolts not sure of part name or part number I hit parked car and broke the 2 in front can you help me?
@rcmustsee4374 жыл бұрын
sorry cant help you buddy. check bangood.
@derekquinones86147 жыл бұрын
What's a good heatsink fan to put on the cheetah is the one you have work well and do you recommend me using one ?
@p.k.8087 жыл бұрын
Derek Quinones I got the same one he has and works well. Keeps the engine cool. Worth it is you have multiple batteries and plan on running them back to back.
@p.k.8087 жыл бұрын
Im excited to see your redcat rockslide. I was planning on getting one of those too. Have you bent any drive shafts on the cheetah? I had a bashing session the other day and bent a lot of them. The cheetah can take a very bad beating. Hit soo hard the electric motor fan flew off.
@rcmustsee4377 жыл бұрын
yes, one of them is bent. i have not gotten the chance to bend it back.
@adxrc50487 жыл бұрын
Have you seen the new badlands mx28, I think they'd look awsome on that cheetah
@rcmustsee4377 жыл бұрын
yea they look cool. actually they look similar to the duratrax tires i took off, just probably much smaller.
@dreamweaver58696 жыл бұрын
Do you know what weight of shock oil the Cheetah comes with? I'm gonna do some shock maintenance and replace my oil with 30 or 40 weight. These springs are really hard and I might try moving the shock caps inward to the middle hole, this should soften the ride a bit. Great tip for for strengthening the shocks👍
@rcmustsee4376 жыл бұрын
i felt like the shocks were over sprung and under dampened. in other words, it was bouncy. not something you want. putting in thinner fluid will make them even bouncier. i replaced it with 70wt oil and it barley made a difference. a softer spring would be the answer but that is not an option from jlb. best of luck.
@dreamweaver58696 жыл бұрын
rc mustsee Your right it’s crazy oversprung and I had very little shock oil inside. I’m gonna try some heavier oil, I have 80weight to try and I’ll report back.
@kizameazz3 жыл бұрын
Just use turn buckles
@fabienghys6 жыл бұрын
Hi! Could you please explain how you add the fane? I have no way to plug it, no available slot.
@rcmustsee4376 жыл бұрын
Fabien G. Plug it into the reciever
@fabienghys6 жыл бұрын
rc mustsee thanks but the receiver has no more slot available, see: www.dropbox.com/s/odg02g7wserz872/Photo%202-8-18%2C%2011%2039%2035.jpg?dl=0 It’s the original receiver. The only 2 pins available are not black/red cables. Any suggestions?
@rcmustsee4376 жыл бұрын
ahh ok. I switched to a spektrum receiver with 3 slots. you can get a cheap RX&TX and solve that problem.
@fabienghys6 жыл бұрын
Thanks.. euh... what is a RX&TX??
@tysgaming7167 жыл бұрын
can you do a review of the wltoys a969-b
@rcmustsee4377 жыл бұрын
Tys Minecraft And More sure!! just send one over to me!
@tysgaming7167 жыл бұрын
rc mustsee sorry man I can afford it I was hoping you would buy it to review
@tysgaming7167 жыл бұрын
rc mustsee anyway keep up the good work!
@p.k.8087 жыл бұрын
Wats the difference between the recat you ordered and the $200+ rockslide super crawler.
@rcmustsee4377 жыл бұрын
i was wondering the same thing when i went on the redact website. i went back to the website i ordered the truck from and made sure i actually bought the RTR truck... apparently i did. i am a bit worried. Maybe the Redcat website is the "asking" price, not the actual msrp.
@p.k.8087 жыл бұрын
rc mustsee Regardless they are a very great deal. I was looking at them from towerhobbies. I am interested in getting one aswell. The redcats look great bang for you buck type of rc like the cheetah is. Lol
@rcmustsee4377 жыл бұрын
yes, they seem to be a well established bargain brand RC. Im looking forward to putting it through its paces. i figure that it should last considering I'm not going to be jumping it or crashing it at 30mph but... we shall see. already have a few crawling spots in mind to test. btw, the twin hammers has already arrived!!
@p.k.8087 жыл бұрын
rc mustsee Wow that was fast!!!!! Me and a few friends are trying to figure out our first crawler and are keeping posted to see how well they perform to make our choices. I personally like your ascender, its a great rig. Keep up the good work.
@danpitcher66705 жыл бұрын
Im sure i heard 65mm 🤪🤣
@DK-jq9me7 жыл бұрын
Hi, I need this custom shock, i search all internet with nothing, could someone make me a set please ? in place of 20 dollars... Excuse my english.
@camiloecheverry52103 жыл бұрын
For part in the usa go to www. rcparts . us
@rockrollrc567 жыл бұрын
sell me those DURATRAX' they will fit on my 1/8 Zombie 8E!!! 17mm hex ??