I started laser engraving MTG Cards onto metal. I make the blanks myself and they are the same size as mtg cards, just slightly thicker.
Пікірлер: 179
@Kagebushin01Ай бұрын
I would totally buy some of those just to use as Proxy Commanders
@pepperypeppers2755Ай бұрын
????? What else would you even do with these ??????
@DarkSideDesignsАй бұрын
Probably could complain as Gambit and sharpen the edges...
@thomasbunn00Ай бұрын
@@DarkSideDesignsfirst thought I had reading that question.
@Jrizzle7426Ай бұрын
Make a whole deck.
@IssblodhАй бұрын
@@Jrizzle7426and try to riffle shuffle
@spiderhaz_Ай бұрын
When your deckbox pops open and it sounds like you dropped a tool box xD.
@DarkSideDesignsАй бұрын
You get it!
@Willynelsonthe69thАй бұрын
can't wait to shuffle my full deck darksteel deck.
@VirgilAllenMoore26 күн бұрын
That's a truly unique application for proxy creation. Well done
@DarkSideDesigns26 күн бұрын
Thank you!
@Montyandrew45Ай бұрын
Gonna save this for later. I think having one of the Silent King or Mr House would be cool
@DarkSideDesignsАй бұрын
Definitely!!
@gigachad2437Ай бұрын
Who else sees the color in the mana symbols?
@blessedpickle138629 күн бұрын
So used to the game you start to see things
@Justadeathgod27 күн бұрын
yes especially the red green and lesser the blue... that's 20 years of reading magic cards for me I guess
@codenamexeldaАй бұрын
You're making better products than wizards themselves.
@DarkSideDesignsАй бұрын
Hahaha maybe they can commission some secret lairs..
@VultureXV24 күн бұрын
Imagine if the metal had a proper level of bismuth alloy which gave it a sort of chromatic effect.
@DarkSideDesigns24 күн бұрын
That would be crazy, but bismuth is a very weird metal haha
@VultureXV24 күн бұрын
@@DarkSideDesigns Or a form of electrolysis plating using a form of chromatic metal.
@DarkSideDesigns24 күн бұрын
@VultureXV whiles it's possible, it's pretty expensive to do and you have to deal with some pretty gnarly chemicals
@dmajor9982Ай бұрын
Am I he only one that’s seeing the mana symbols have a colour tint to them? I know it’s a trick of the mind but still…
@b-man341Ай бұрын
I was just about to say. Glad I’m not the only one
@helios56626 күн бұрын
Ita half a trick of the mind and half that the mana symbols still have the same value just no hue to them.
@nadavperry226726 күн бұрын
I thought I was going crazy for a second
@zachsmart92528 күн бұрын
its crazy that i can see the colors
@GraniteJockey26 күн бұрын
This is by far the coolest thing I’ve seen when it comes to MTG nostalgia collectibles.
@DarkSideDesigns26 күн бұрын
Thank you! I wanted to make something fun and unique
@GraniteJockey26 күн бұрын
@@DarkSideDesigns I already emailed you for a price on one.
@austinwhite9225Ай бұрын
Wonderful idea by the way. Was gunna make some for my play group. A buddy came across your video and shared it with us.
@wert123457627 күн бұрын
Shit goes down when that get thrown on the table
@DarkSideDesigns27 күн бұрын
Definitely.! Haha
@Ironman1222110 күн бұрын
holy shit that is really nice. I imagine this being a nice alternative for your commander which sets it apart of the 99 instead of the thick edged foil commander proxies.
@DarkSideDesigns10 күн бұрын
Thank you !
@janluismendoza987628 күн бұрын
It's beautiful, I need several like this for my favorite commanders
@DarkSideDesigns28 күн бұрын
For sure! Let me know!
@rafaelsantos-nl9jdАй бұрын
this can be a very good display to use in your commander deckbox or something like that
@DarkSideDesignsАй бұрын
Definitely! I have a few deck box designs I'm working on that incorporate the metal cards too!
@mfmageiwatch28 күн бұрын
Much cleaner than I get with my CO2 laser, dang.
@DarkSideDesigns28 күн бұрын
Thank you! Fiber lasers do have a smaller beam size so that could attribute it
@paintballgod33Ай бұрын
Imagine the customs for kitchen table! Looks and sounds nice!
@DarkSideDesignsАй бұрын
Oh yeah, these been fun to make for my play group especially some of the custome alters I've designed
@DreamDaddie27 күн бұрын
I’d love a laser engraved Rafiq of the Many. This is lovely work!
@DarkSideDesigns27 күн бұрын
Thank you
@dylanparry301628 күн бұрын
This looks so good
@DarkSideDesigns28 күн бұрын
Thank you
@DROPKICKaZOMBIE24 күн бұрын
That's awesome!!!!
@DarkSideDesigns24 күн бұрын
Thank you!
@NinjaFreshАй бұрын
Pretty cool idea. Makes a great stand in for your commander. How well does it hold up to rubbing or light play?
@DarkSideDesignsАй бұрын
Pretty great. The annodized coating holds up well so the image wont scratch off easily. ill upload a torture test I did!
@thefattesthagridАй бұрын
I mean, I read it.. but my brain still managed to make "Yoda" out of it. Disappointment is immeasurable.
@DarkSideDesignsАй бұрын
I hope your day isn't ruined!
@robtheshamanАй бұрын
Yeah im def getting my commanders done this way.
@DarkSideDesignsАй бұрын
Let me know! I'll be opening up the books again May 5th, you can send an email and get in the queue if you'd like!
@robtheshamanАй бұрын
@@DarkSideDesigns absolutely I'll email on May 5th then. Thank you much for replying!!
@daem0nfaust26 күн бұрын
It's beautiful. And weaponizable. Not a recommendation to weaponize.
@DarkSideDesigns25 күн бұрын
Definitely! Haha hypothetical throwing cards haha
@LaosVaerosАй бұрын
Definitely wanna do this for a Phyrexian deck
@DarkSideDesignsАй бұрын
That would be pretty metal! Haha let me know
@paulk790629 күн бұрын
This is really cool. What laser engraver are you using?
@DarkSideDesigns29 күн бұрын
50w JPT Fiber laser
@mrkemisterАй бұрын
Damn thats nice what fibre laser do you use?
@DarkSideDesignsАй бұрын
50w jpt!
@synstaur5986Ай бұрын
very very nice
@vesstigАй бұрын
Didnt Wizards do a few metal cards back in the day but were limited to a small selection of cards?
@DarkSideDesignsАй бұрын
I remember those thick embossed metal cards, but im not sure about regular ones. I remember a Karn one
@hassanahmadi4882Ай бұрын
SICK
@sirghosttoad755825 күн бұрын
would be kinda nice to show up to commander with 100 metal cards 😎😎
@DarkSideDesigns24 күн бұрын
Hell yes haha, drop that on the table like it's a frying pan haha
@sirghosttoad755824 күн бұрын
@@DarkSideDesigns how much does one weight and much does it cost to make one metal card?
@DarkSideDesigns24 күн бұрын
@@sirghosttoad7558 they weigh about .25 Oz and pricing starts at $18
@83erMagnumАй бұрын
Are you using business card blanks? This has probably different dimensions than a regular mtg card then, right?
@DarkSideDesignsАй бұрын
Nope! I cut my own blanks so they are the same size, just slightly thicker
@appleender95929 күн бұрын
Dude, would you be able to do the oil-slick cards? Imagine how cool that would be!
@DarkSideDesigns29 күн бұрын
I have made some, ill post the video soon
@dylanparry301628 күн бұрын
I would love to see these
@austinwhite9225Ай бұрын
Where did you get the blanks from? I can only seem to find smaller ones that aren't the same size as MTG cards
@DarkSideDesignsАй бұрын
I make the blanks myself!
@austinwhite9225Ай бұрын
@@DarkSideDesigns Impressive. What kind of device do you use for making them if you don't mind sharing
@DarkSideDesignsАй бұрын
Waterjet!
@oriorb28 күн бұрын
Damn, you managed a better process than the Double Feature with just a laser engraver lol
@DarkSideDesigns28 күн бұрын
Haha thank you!
@DAW5ONАй бұрын
can you do this on bronze or just gold plate the metal befor or after?
@DarkSideDesignsАй бұрын
So right now I only have black anodized aluminum, bronze or gold colored metal under might be possible to cut eventually, but it's just expensive
@caled6913Ай бұрын
Take my money!
@DarkSideDesignsАй бұрын
For sure! Send me an email and we can get started
@theonlyjeffАй бұрын
Can those be sleeved and shuffled? I’m imagining a metalcraft deck out of metal 🤘🏻
@DarkSideDesignsАй бұрын
You can sleeve and shuffle them, but they are slightly thicker then regular MTG Cards
@TCR_DND28 күн бұрын
what did you use to make this?
@DarkSideDesigns28 күн бұрын
A fiber laser!
@peterkokeny9235Ай бұрын
do you do non-Magic cards, like Flesh and blood?
@DarkSideDesignsАй бұрын
I do! I've done a few in the past
@peterkokeny9235Ай бұрын
U have a webpage or something like? :)
@DarkSideDesignsАй бұрын
Right now I have an etsy, or you can email me if you'd like
@tcghunter919626 күн бұрын
What's the blanks material you're using. I've seen a few people do these but these are probably the cleanest ones I've seen.
@DarkSideDesigns26 күн бұрын
I'm using anodized aluminum! And thank you! Lots of patience and practice!
@tcghunter919626 күн бұрын
@@DarkSideDesigns I bet. I've messed with 3D resin printing, takes a lot of patience and fine tuning to get what you want out of it.
@DarkSideDesigns26 күн бұрын
@@tcghunter9196 100% I've tried resin printing, it's so difficult compared to fdm!
@tcghunter919626 күн бұрын
@@DarkSideDesigns Its SO touchy and finicky lol one tiny thing is off and the whole dang things will fail! How much thicker did you have to go on that stock? Sounds HEFTY and love it lol
@DarkSideDesigns24 күн бұрын
It's actually only .5mm thick so not too bad, aluminum dissipates heat really well so that helps
@VrangTАй бұрын
God damn, nice! Need to get one sometime if possible
@DarkSideDesignsАй бұрын
Let me know! Pricing starts at 18 bucks
@VrangTАй бұрын
@@DarkSideDesigns would def like to order one for sure! just dont know how to message you/get a hold of you 😅
@briangoad4398Ай бұрын
@@VrangT Same
@DarkSideDesignsАй бұрын
Darksidedesigns.co@gmail.com is the best way to contact me right now!
@vladdracula2643Ай бұрын
Wow, whats the price for a setup like this and complexity?
@DarkSideDesignsАй бұрын
Starting at 18 a card! Pretty much can do any image, and can make custom cards too!
@rd1012Ай бұрын
nice
@MikeHellmuth26 күн бұрын
Gotta ask where do you find 3.5"x2.5" metal laser medium? Or do you cut them yourself?
@DarkSideDesigns26 күн бұрын
Cut them myself!
@tradtke10121 күн бұрын
@@DarkSideDesigns You use the same fiber laser to cut them? or plasma cut? or something else?
@DarkSideDesigns21 күн бұрын
@@tradtke101 I use a waterjet!
@tradtke10121 күн бұрын
@@DarkSideDesigns hot dog! Master of all the elements haha! I saw you have a 50W fiber laser? That's like a freakin Moonraker lol. I just got my first laser tonight- Roly Lasermatic MK2, 20W. The journey begins ! I'll definitely be following your channel as making metal cards for my board game ("Way of Steel") is my goal. Seems like most everyone in the laser world is doing business cards and tumblers. Really glad I found your channel. Hope to learn a lot from you, and maybe also not burn down my house. But ya know, sacrifices must be made.
@paintballer4055Ай бұрын
now, shuffle them!
@DarkSideDesignsАй бұрын
Oh I will, ill make a video!
@DeusExNihiloАй бұрын
I wonder if you could use holographic spraypaint on these? If you try it you'll want to put a clearcoat on to protect it from wearing off
@DarkSideDesignsАй бұрын
I actually do offer a glitter holo coating. It's essentially a clear coat mixed with multicolor glitter
@DeusExNihiloАй бұрын
@@DarkSideDesigns do you have any images or videos showcasing that?
@DarkSideDesignsАй бұрын
Yes if you look at the video with the Rebecca card, it has the coating
@DarkSideDesignsАй бұрын
I also have more on my tiktok account
@DeusExNihiloАй бұрын
@@DarkSideDesignsmaybe I missed something but I didn't see it in that video. Also you should put links to your website/ other platforms in your channel info and video descriptions if you want people to find your stuff.
@Bob06506Ай бұрын
Do you have an etsy store? If not make one plz I have a list of commanders to be made
@DarkSideDesignsАй бұрын
I do, and a website, and take direct email orders for a discount. I'm actually moving across the country right now, but I should be back up and running may 5th. Def send an email to get in the queue
@austinhodges336527 күн бұрын
How much would it cost to do a while commander deck
@DarkSideDesigns27 күн бұрын
$18 dollars a card... so a bit expensive
@TheEternalHyperborean27 күн бұрын
@@DarkSideDesigns Lol, not really comparing to the actual price of a lot of magic cards.
@DarkSideDesigns27 күн бұрын
@TheEternalHyperborean haha very true... sometimes I think it's crazy what we are willing to pay for cardboard!
@austinhodges336526 күн бұрын
@@DarkSideDesigns that would be worth it in some cedh decks
@NareasАй бұрын
I love it! Do you ship to austria? ^^
@DarkSideDesignsАй бұрын
I can! As long as you're willing to pay for shipping
@alcazarfreddyАй бұрын
I had the same question!😂
@NareasАй бұрын
@@DarkSideDesigns Wupwup! Awesome :D
@NareasАй бұрын
@@alcazarfreddy na servas xD
@a.artmaster8733Ай бұрын
Can you then make it colored? I’d buy it then, not feeling black white unfortunately
@DarkSideDesignsАй бұрын
I can hand paint some depending on the art for extra
@RollingCalfАй бұрын
@@DarkSideDesignshow will you keep up when the orders flood in? I personally dig the black and white. Feels like I'm looking at the cover of an old fantasy novel
@DarkSideDesignsАй бұрын
I have no idea hahaha
@sed4720Ай бұрын
what machine do you use
@DarkSideDesignsАй бұрын
Fiber laser!
@briangoad4398Ай бұрын
How to I buy one...
@DarkSideDesignsАй бұрын
Currently I'm moving across the country, but my shop will be set up May 5th. You can get in the queue though by emailing me!
@ashemabahumat4173Ай бұрын
Custom commander stand-ins if you own the actual card should be a thing... hell, any game with an extra deck-esque/token system should allow it
@DarkSideDesignsАй бұрын
Definitely! I'm also working on integrating these to 3d printed deck boxes
@zelvin5147Ай бұрын
I mean, my store allows proxies if the table you’re playing with allows it. We see it all the time and we believe it encourages friendlier player interaction and engagement!
@DarkSideDesignsАй бұрын
100% I agree. As long as people are having fun, I'm having fun!
@cc_jmkАй бұрын
wow that looks amazing! My mind is just not wrapping around it.. it's just.. making the surface rough at a micro scale to reflect light and look whiter ?? For some reason my eyes want to see that as paint (even though it makes no sense with a laser hahaha) and I would be worrieed it might stain stuff (other cards, deckbox, etc)
@DarkSideDesignsАй бұрын
So basically the blank cards are anodized aluminum, and the laser takes off the anodized coating leaving the image. It's actually smooth to the touch on the surface.
@cc_jmkАй бұрын
I see! thanks for taking the time to explain!
@DarkSideDesignsАй бұрын
No problem!
@cactuscanyon2422Ай бұрын
Are those mana symbols colored or is my mind tricking me
@DarkSideDesignsАй бұрын
They aren't on this one, but I do hand color some cards
@MattiaPiolaАй бұрын
Mind trick, I faintly see them too! 😅
@XFoxTrotАй бұрын
Take my money
@DarkSideDesignsАй бұрын
Gladly lol send me an email, I'll get you started!
@sidneyhuckabee359826 күн бұрын
How much for a black lotus?
@DarkSideDesigns26 күн бұрын
Def. Send me an email!
@sidneyhuckabee359826 күн бұрын
@@DarkSideDesigns idk how 😅 I think I found the email in another short
@Bee-wk7hwАй бұрын
How much?
@DarkSideDesignsАй бұрын
Starting at 18 dollars
@Bee-wk7hwАй бұрын
@@DarkSideDesigns do you have an email or something to buy them?
@binbhrfАй бұрын
@@Bee-wk7hw it's chilling on the bottom of the video the entire time
@DarkSideDesignsАй бұрын
Yes darksidedesigns.co@gmail.com!
@wellgaroaАй бұрын
show how thick it is
@DarkSideDesignsАй бұрын
Next video I post, I'll show thickness and how it sizes next to a regular card!
@ThatWildcardАй бұрын
Proxypeople will go through all this just to not spend over 1$ on a card
@DarkSideDesignsАй бұрын
I mean, you do you. These are just fun metal cards.
@raiderdevellian5752Ай бұрын
I'm sure these will cost more than a $1. I buy tons of cards. But having alternative options in a already expensive market at least having options beyond Hasbro is awesome
@appleender95929 күн бұрын
Yes, because WOTC readily offers cool metal versions of your favorite commander. /s
@bradcallahan3546Ай бұрын
You picked the dumbest card..
@DarkSideDesignsАй бұрын
Why? It was for a customer though.
@BigPapaGandaАй бұрын
I dunno, I kinda like Jodah. He's pretty open-ended for what you can do with him, plus he's not as pushed as some of the newer 5 color commanders.