This short video shows how to adjust your collet closer so the handle doesn't shake and rattle during operation. Its an adjustment many lathe owners may not be aware of. Take a Look !! Patreon Link / joepie
Пікірлер: 102
@ls20050192275 жыл бұрын
I don't even have a collet closer & I still enjoyed watching your video. Thanks!
@mrc15395 жыл бұрын
I’m always amazed how you come up with such a simple fix that all the rest of us overlook. Best to you Joe and thanks for the information.
@thetoecutter135 жыл бұрын
I watch videos like this everyday, and learn something every day. My step son also watches KZfaq every day but he watches people light farts and eat Tide pods. Strange how different two sides of the same coin can be.
@markh21285 жыл бұрын
I never fail to learn something from your video's thank you!
@jimsvideos72015 жыл бұрын
I prefer Patreon over merch because the overhead is so much lower; I need another mug like I need a hole in the head but a couple bucks a month to support your filmmaking sounds fine with me.
@Limeayy5 жыл бұрын
could've sworn you would've replace it or something but all you had to do was loosen the 3 bolts and check for ID OOR. that's awesome.
@garysauer62075 жыл бұрын
You do nice work Joe. Thanks
@lurch11345 жыл бұрын
Thank you for all your videos
@donswords66712 жыл бұрын
Thanks Joe! Worked like a charm.
@James-fs4rn5 жыл бұрын
Thanks for another great tip. I'll support the channel.
@christurley3915 жыл бұрын
Thanks for the video Joe.
@arienugteren37975 жыл бұрын
Happy New Year! Will continue watching! Many videos help me a lot in daily work!
@deemstyle5 жыл бұрын
I really enjoy your channel and learn so much here. I'd happily purchase a t-shirt to support you and your content creation!
@ckvasnic15 жыл бұрын
Awesome. Thanks For sharing your time and talent.
@stanervin61085 жыл бұрын
Thx Joe. Never thought about back end alignment!
@lohikarhu7345 жыл бұрын
Happy New Year, nice to see you back ! Even if I don't have a noisy closer ;-) Have a healthy and successful year, Joe!
@ScottieSharpe5 жыл бұрын
Great topic! My Harrison lathe manual has a section on this procedure.
@blacksupra105 жыл бұрын
workshop tour joe :) it's obvious you have a really well organised shop, i think that would be of interest to many.
@FredMiller5 жыл бұрын
Slick fix Joe. Nothing more satisfying than a quiet well running piece of equipment. Happy New Year.. Fred Ontario, NY
@krazziee20005 жыл бұрын
great diagnosis and repair ,thanks for the video,,
@nineringsh5 жыл бұрын
Thanks for the video, going to try and tune mine up - driving me crazy for several years.
@milkyfishh5 жыл бұрын
Hey Joe, most definitely a shirt or two! Great fix, as always. I've had to do this in the past, but did not figure it out as quick as the video. Thanks, Chuck
@toolbox-gua5 жыл бұрын
Excellence shines from your attention to details.
@joepie2215 жыл бұрын
Thank you.
@alk67445 жыл бұрын
Thanks joe, I have older yuasa engine lathe with a royal 5c closer, has always rattled, tried your method and now it’s perfect,, thanks again
@chrisstephens66735 жыл бұрын
Attention to detail is what makes the difference between an expert and a hack.👍👍👍
@MalJ-eb7nv5 жыл бұрын
Like your work Joe; like you ability and methods you use to pass on knowledge. All the best in 2019. I think shirts are a good item for USA residents. I do learn a lot from you and love the technical and mathematics aspects. Mal in Australia.
@planeflyer215 жыл бұрын
Sweet, Joe! This is amazingly timely for me. I have a collet closer I'd bought for my lathe and never mounted yet. In shops, closers were always pre-mounted by the time I used them, so I was unaware there may be an issue. Nice to be able to head it off at the pass!
@pacokelly55365 жыл бұрын
God bless and happy new year Joe..
@jkopel5 жыл бұрын
Thanks for this Joe, I had to make the ratchet part for mine and have been fighting vibration ever since without really knowing what the issue was. I assumed it was runout on the end, not the OD! Going to give this a try tonight.
@Sodabowski5 жыл бұрын
Happy new year Joe :)
@amundsen5755 жыл бұрын
nice fix, I have a manual closer and I machined a delrin sleeve to make the tube fit snug and concentric
@bigdawgsbusa25 жыл бұрын
Thanks Joe Happy New Year's great content to start the New Year out with, and some Joe Pie A.I. swag would be👍
@bbumpy45235 жыл бұрын
Excellent tip Joe. I inherited a Nardini Lathe from another department and the closer rattled like a screen door in a tornado. I did the same thing and it made a world of difference. The only problem is any time I have to open the door to access the drive belts, change gears, etc., I have to remove the geared collar and indicate it in again. I made a plug and installed it on the end of a piece of all thread (the spindle ID is larger than the collar ID). I can feed it in from the chuck end and use that to align the geared collar and the spindle. It gets me close enough to eliminate the rattle.
@MrMetalmaster15 жыл бұрын
thanks for inspiring me to take care of this problem , I have been ignoring it for 2 years
@Likeaudio3 жыл бұрын
Handy tips thanks
@cheater002 жыл бұрын
lovely video, thank you!
@IBWatchinUrVids5 жыл бұрын
I found one of those cogged 'gears' on the end of my now restored 12" Atlas Commercial lathe. Some folks online told me what that part was for, but I never really understood until now. Unfortunately, I don't have any of the other parts for it. Looks like a useful attachment.
@ADAMX7775 жыл бұрын
I really appreciate your advice and informative videos Joe. I would definitely buy a shirt or two, preferably black. Black goes with everything and it's hard to tell if you get a stain on them.
@RRINTHESHOP5 жыл бұрын
Your closer is the same as a Clausing and sim. to Hardinge. Good job, I have done this to all 4 of mine, makes a great diff.
@joepie2215 жыл бұрын
Hi Randy. The first time I was shown this, I was amazed at what a difference it made. Thanks for stopping by.
@robertoswalt3195 жыл бұрын
I would be interested in either a sew on patch or a cap. I have so many t shirts it is ridiculous. Thanks for another great video and best wishes to you and your family for 2019.
@richnelson4775 жыл бұрын
Great work Joe! I enjoy your video’s, which are always informative. By the way, I would be interested in one of your T-shirts to add to my collection of 200 plus, which is constantly growing.
@nadam358 ай бұрын
thanks for posting this...i have a takisawa with a very similar closing mechanism, and my bouncing handle is borderline dangerous.
@somebodyelse66735 жыл бұрын
I'd rather buy something I can use in the shop. I've got a set of Randy's dovetail cutters, my genuine Fenner t-slot cleaner, etc. I understand you're not looking to increase your workload, but i've already got enough shirts, mugs, and assorted promotional doodads to last a lifetime (at least the rest of mine, anyway). How about some Moore style edge/corner finders with your logo? Sell me something I can use! 😀
@jrkorman5 жыл бұрын
What he said - keep up the great work!
@maciekm79535 жыл бұрын
You do such a great job and share so many brilliant ideas, a huge Thank You for that. I feel like You deserve at least 500k subs. And I wish You that for this year. Ps. Do You send t-shirts worldwide?
@cbfinley44675 жыл бұрын
T-shirts would be a great idea!
@raffiaroyan11185 жыл бұрын
+1 for Patreon, I need to pay you back for all the time you have save me at work!
@billy194615 жыл бұрын
I would take either!
@billchiasson20195 жыл бұрын
Great video as always! Thanks for sharing, I would buy a t-shirt!.
@rickbowen69295 жыл бұрын
Another well done video Joe!....I have been wondering why, at my advanced age, that I crave knowledge like a pregnant woman craves ice cream, .....then I read what Einstein said: " Live like you are going to die tomorrow, learn like you are going to live forever, and never stop questioning."
@googacct5 жыл бұрын
One thing I noticed in this video is how you had the dial indicator attached to the clamp. I never thought about a dovetail being there to mount the indicator. I will have to see if mine has that.
@bulletproofpepper25 жыл бұрын
Well there you go, didn’t know you could adjust that, I worked and a electrical component manufacturer. Had a little lathe I ran. I actually got fast enough with it that I got into trouble with the union day shift boss and got an red ink write up for stressing out the day shift union workers (night shift, my shift was non-union workers)
@brianevans19465 жыл бұрын
Thanks again for the great content. Ii would be in for a shirt or two, only problem the shipping would probably cost more than the shirts... and there is a good chance they will go missing in the mail..
@dbturbonub25365 жыл бұрын
You should do a video on knee-mill repair/maintenance and backlash adjustments.
@alexbarnett85415 жыл бұрын
I'd like to buy a shirt. I've learned a lot from watching your videos. Thanks!
@AndyBlackman5 жыл бұрын
T's are good!!!
@mosfet5005 жыл бұрын
I have the same closer, it's a Royal, even after 30 years my collets still run true to a couple of tenths. I just checked mine and it's quiet, I think I dialed it in when I got it but I don't remember.
@willl845 жыл бұрын
Was hoping to use to get for the closer on my Tormach lathe. Sadly I've already done this. The manual says to get it within 0.001". No matter what I do the wobble stays. Occasionally it'll be fine. Might have something to do with the closer unit itself. I've resorted to unscrewing the handle instead. Keeps the noise down anyways
@Bereft7775 жыл бұрын
Thoughts on locktite on those screws to prevent further loosening?
@libertyhillbilly41585 жыл бұрын
I'm your neighbor from up the road that met you at the Good of the Land Fest. Would definitely pick up a t-shirt to represent your company and channel. You might check in to Bunker Branding...it is a content creator specific company started by the Demolition Ranch/Off The Ranch guy and his wife to support merchandising for KZfaq creators. Not sure how the cost compares to Teespring, but worth checking in to.
@EmmaRitson5 жыл бұрын
always need a teeshirt joe
@tdubveedub5 жыл бұрын
I would like a t-shirt from both the diving and machining side.
@drickard675 жыл бұрын
I'd buy a shirt... I've gleaned a lot of info from you.
@pedrowhack-a-mole67864 жыл бұрын
They run even better if the face of the spindle extension runs true also. I filed and stoned that face to .0002 run out and indicated the "ratchet" plate I.D. to .0002. You could stand a penny, on edge, on the end of the quick change lever at 2500 RPMs.
@noelhenderson7005 жыл бұрын
Re. "T" shirts. Possibly including the spider?
@perolovson17155 жыл бұрын
Q: When time is found, I would like an explanation about how lathe tools works. Using an insert desigened to go towards the headstock, what would hapend when cutting ”the wrong way”? It’s with great intrest I watch Your videos! Regards PeO
@TimothyGack5 жыл бұрын
I'd be in for a t-shirt.
@lorrainebayford1775 жыл бұрын
Would love the machine shop Tees. Black
@apollorobb5 жыл бұрын
I'd go for a A.I. shirt Joe
@ClownWhisper5 жыл бұрын
I've been trying to figure out how to do this on a hardinge for a few years now and this technique unfortunately won't work because that catch gear floats freely. I'm thinking where it gets oh is where the arm assembly clamps down to the large bearing but I have monkey with it and it's still not quite right it can get to vibrating like hell if you have any tips on the hardinge style closer I would greatly appreciate everything
@ClownWhisper5 жыл бұрын
@@donnerpartysupplies5187 well thanks for the great reply man I appreciate it. I actually only hit the center it on the bearings a little bit better and now there's no vibration at all. I used to get really bad at certain speeds but I ran it up and down and I can't get it to vibrate I tried 3/4 5/8 in 1/2 inch I figured if I can't get it to vibrate at those sizes at full range then I'm pretty good to go LOL all those ideas that you just gave me I'm going to file that for sure you're very knowledgeable. I got this machine for free believe it or not I mean it's not the most expensive of hardinge machines the DSM59 BUT IT SURE COMES IN HANDY! The shop they gave it to me should fire all their maintenance guys because they said the thing was fried it's at for 30 years under a tarp the only thing that was wrong with it was the main power transformer I'm not talking about in the e-box I'm talking about the shop power. I don't know the proper terminology for that. And there was all kinds of notes around the machine about what worked and what did not they had the speed controls wired backwards and the speed sensors wired backwards so basically the limits answers did nothing and you could crash the pulley motor because there was no stop to it. Instead they wrote in sharpie do not pass this point LOL how can you be an electrical maintenance guy and not understand a simple diagram or how to trace a limit sensor LOL They said that the flood pump did not work and all it was was a sticky relay. It's not really a relay I can't think of the Damned name of the component I'm having a senior moment lol but you know what I'm talkin about the relay actuator deal? It was just sticky that was it Jesus Christ these people are so bad this machine was like brand new other than it's paid job I mean it was completely covered the ways we're like a mirror they were so perfect everything was perfect on the thing and they just gave it to me LOL what a deal I got I'm not trying to brag I am consider myself very very fortunate right place at the right time sort of deal thank you very much again for your help I will print this off and file it
@stevenboyko59255 жыл бұрын
T-shirts, yes! Especially if they say, "I NEED A HUGe amount of money to support my machining hobby!" and include your logo
@metalshopwithtroy57555 жыл бұрын
Yes please (Rotary table work)
@charlesdriggers1995 жыл бұрын
T shirts. Yes.
@joepie2215 жыл бұрын
Working on it.
@bruceanderson94615 жыл бұрын
The timing for this video couldn’t be better as I just bought a royal collet closer off eBay and have your same lathe. Is the lever hinge mounted to the fiberglass end cap only or is their additional support that I can’t see? I would like to support your channel but can’t support patreon. Abom had this problem and set up a paypal account for those who don’t support patreon. Could you consider this-thank you again for your great videos!
@joepie2215 жыл бұрын
My closer anchor sits on a thick large plate I made to distribute the force over a bigger area on that fiberglass cover. That end cover is $3000 if you crack it, so a plate is suggested. I do have a paypal account for donations and business transactions. the target account is jpieczynski221@aol.com
@bruceanderson94615 жыл бұрын
Thank you for replying!
@sittinbullmb5 жыл бұрын
I would buy a pocket t or 3
@danmetzger55835 жыл бұрын
I would get a shirt.......make it cool though!
@dennyskerb49925 жыл бұрын
Hey joe, I’d buy a T-shirt
@workwillfreeyou5 жыл бұрын
Lathe envy!
@34k55 жыл бұрын
My vote for a T-shirt is yes
@markbaldwin17765 жыл бұрын
Better than a t-shirt is coffee mugs!
@avionicstechshop76645 жыл бұрын
Teespring does offer the coffee mug option if Joe sets up a coffee mug design product. I don't know if teesping is better than custom inc. Lowes KZfaq channel uses teespring. Haven't seen an example of custom inc. On any channel's yet.
@NavinBetamax5 жыл бұрын
I'll buy T-Shirt....and Coffee Mug......and drink Tea out of the mug while wearing the Shirt !!!
@julianp.17135 жыл бұрын
Sure, make some cool shirts. even though I like the dive shirts. I've been a diver for many years myself.
@tobarapprentice66185 жыл бұрын
I’m in for a shirt.
@rootpass745 жыл бұрын
I'd take a shirt or two
@motorbreath225 жыл бұрын
T shirts or stickers
@dennyskerb49925 жыл бұрын
460👍🏽
@lescotta74275 жыл бұрын
Go for the shirts.".................
@Robert-vt1un5 жыл бұрын
Absolutely. It just seems better to get something back, like a hat or t-shirt, than just pay some money. I would probably give twice as much if I got something tangible in return. And I love t-shirts that make people ask what it means so I can get somebody else interested in my hobbies. Love your channel.
@Shawn_speed5 жыл бұрын
Hobbyists beware. Watching too many Joe P and other cool content producers may induce mild to severe case of CID (cast iron deficiency). I know I got it. The symptoms may include but not limited to: · Rearranging the back yard and flying 4,000 pound pecan trees over the house so 3,000 pound machines can roll to the shop · Tearing down sheds and making I Beam structure additions with reinforced concrete floors · Selling the whole machine collection and starting a new collection with bigger machines · Being rewarded for the whole crazy adventure with finding amazing treasure troves · Running into problems with the new machines that are actually covered in Joe’s videos I’ve found too many cool, new condition toys to list but the major finds are: 1974 Bridgeport that looks unused 1971 Harrison 13X40 L6 MK III with a GE hour meter. Manual calls for 80 hours of break in, hour meter shows 78 Cincinnati Monoset clone, Denver Astro made in Taiwan circa early 90’s Brown & Sharpe No 2 surface grinder with WWII Picatinny Arsenal tag U.S.P 2401 The grinders are project machines. They were so dirty; I couldn’t tell what color the B&S was. They have cleaned up beautifully. The B&S has its original paint and all the ways still have the original flaking. Here is a sample album of the adventure: photos.app.goo.gl/JzE77Pb17kKyeGBG9 As you can see, the lathe was stuffed in its final resting place with the OEM Royal collet closer in the spindle. I can’t use the chucks, but I can mark where the wall needs a hole so the draw tube can be installed and removed without moving the lathe. A couple of days before this video, I ran the machine and had the problem Joe is describing. Coming from a South Bend and having no real experience, my first guess was a bent tube. Middle of the night worrying gave me the idea to check the runout on the spindle attachment. It was way out. Having no patience, I indicated it within a couple of thou over the notches and with the tube in the spindle. The shake went away. The next day I saw this video. At least when I pull the lathe out to cut the hole and add more shelves, the job of indicating it will be a lot easier with the draw tube out and using the ID. Thanks Joe for all the amazing cool knowledge you are so freely willing to share. I don’t care if you make underwear with holes in it, I would proudly buy it and wear it. Shawn, Phoenix
@kelleysimonds59455 жыл бұрын
put me down for a shirt or two...
@joepie2215 жыл бұрын
They are being planned. Keep checking back. Thanks.
@EDesigns_FL5 жыл бұрын
I'm surprised with your timing of setting up a Patreon account. I love your content, but I value free speech even more.
@joepie2215 жыл бұрын
I get considerable comments about my subscribers wanting to contribute to this channel as a thank you. It was done for that reason. I too value free speech.
@trumpetRex5 жыл бұрын
H
@thomaswoodrow5295 жыл бұрын
Thomas "Woody" Woodrow, W-MACHINE I watch your site regularly and get and use many of your great tips and tricks. I also share some of them with friends. In my opinion yours is one of the best presented, most informative, channels on KZfaq. As for this one, please, if the followers of your channel with this problem haven't diagnosed the fix for this on their own they won't be able to understand much of anything you show and talk about on your site. Give me (us) a break.