John Deere 1640 Fitting the Hi/Lo Clutch Pack

No video

John Deere 1640 Fitting the Hi/Lo Clutch Pack

Рет қаралды 36,525

5 жыл бұрын

After reconditioning the Hi/Lo clutch and brake assembly this video covers fitting it into the housing.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandt...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 20

@robbybachmann332 5 жыл бұрын

Thanks for all the knowledge you are passing along. We have 8 older JD s from 3020 to 4955 s some getting up to 14000 hrs, all in use and getting the job done. We do almost all repairs our selves so having you explain how things work helps allot.

@BundyBearsShed 5 жыл бұрын

G Day Robby, Glad it helps, there is a good sense of satisfaction in doing things yourself. Makes farming way cheaper too.

@andreipetrescu603 2 жыл бұрын

@@BundyBearsShed I talked with a JD dealership guy to look at my JD 3040 tractor(it has a few problems). He was sincere enough to tell me that the intervention would be more expensive than the tractor itself ,and that i should learn to fix it myself. I started by fixing my main pump... On top of that ,they don t even work anymore on tractors this old.

@breikowski 5 жыл бұрын

Lance, you da man! No idea why these videos are not going viral! Stay the course, you are doing stuff nobody is!

@BundyBearsShed 5 жыл бұрын

Thanks Bob, They wont go viral, we are way too old for stuff that most of the world would be interested in. I dont do makeup reviews, lol.

@BleuJurassic 5 жыл бұрын

looks easy to work on if we were not standing in the way interesting video

@BundyBearsShed 5 жыл бұрын

I have been going to have a talk to you all about getting in the way all of the time, lol.

@davidanta100 2 жыл бұрын

Thank you for the information. Good job.

@BundyBearsShed 2 жыл бұрын

You're welcome

@MarianGaura 2 ай бұрын

Hello. I have a John Deere 3650 and I recently rebuilt the transmission. I changed discs, plates, o-rings, rubber rings from the hi low case, I also changed the pump in the transmission, I put a new one but it's on the aftermarket, I changed segments on the power take-off absolutely everything. I have problems with the steering and with the arms on the back, it is hard to lift and turns with knots. If I remove the cover from the gearbox and connect the two pipes between them with a hose, the steering works perfectly and with the arms on the back, when I put the cover on, the steering and the arms on the back no longer work. What could be the cause? Thank you!

@BundyBearsShed Ай бұрын

On the shift cover there is two plugs on the rh side of it, put a 300psi gauge in the front one and check all functions and see if the pressure just drops away with one particular one on. It does sound like a leak in there somewhere, but you will need to test things to know exactly where you should look.

@daveklooster4905 5 жыл бұрын

Good job with the flashy editing!

@BundyBearsShed 5 жыл бұрын

G Day Dave, Thats about as flashy as it gets too. lol.

@andreipetrescu603 2 жыл бұрын

Greetings from Romania! Can you tell me please if the JD 3040 tractor has a similar transmision with this one? I have rebuilt my high pressure pump because the shaft and bearings were done(complete rebuild!). I am worried that my transmission pump may be tired also and that the main pump will run with little oil. I understand that this is the fastest way to destroy a new high pressure pump. Can you give me a few advices on what to look for if i feel that the main pump doesn t get enough oil? Can you tell if the transmission pump is bad only from how the 3p link and power steering works? Also the PTO never worked properly on this tractor ,it slips when trying mowing or round balling. Thanks in advance for any advice and please excuse my many questions!

@BundyBearsShed 2 жыл бұрын

The 3040 is exactly the same set up so going through the internal pump and packs will be a good move.

@andreipetrescu603 2 жыл бұрын

@@BundyBearsShed Thank you very much for your quick reply! I suspect some oil line in the transmission is broken or the transmission pump s pumping days are over ,because it feels like the main pump never gets enough oil...

@daleburns5604 2 жыл бұрын

Hi mate got a question when you tested the clutch packs with air was it still mounted to the tractor? I got everything together when I spin the hi low sharft the PTO shaft doesn't turn and was wondering if that's cause I got it separated from the motor. Any help would be good thanks and amazing job your doing

@BundyBearsShed 2 жыл бұрын

I test on the bench and in the tractor, mainly for any leaks in the pipe work. It wont turn the pto just lock it up with the pto clutch and brake tests.