JOHN DEERE 4010 WITH 7700 COMBINE ENGINE OVERVIEW
Рет қаралды 34,826
4 жыл бұрынThe story and process of my 1961 4010 adding the engine and overview
@OnePieceTractor 3 ай бұрын
Ours was a 1963 and had 18.4 - 34 rubber. It had a 4020 kit in it of course and it was dyno'd at Deere at 101 horse. Dad sure was proud
@carsonharn9246 Жыл бұрын
nice tractor I like how simple they are to drive compared to the newer ones great content
@dcw1540 3 жыл бұрын
Love your tractor. Thanks
@pennyless4tea 2 жыл бұрын
Nice work.
@b.l.barfield2420 2 жыл бұрын
Great Video!! Thanks!
@mcleanfarmsryan3897 3 жыл бұрын
Really like the videos definitely got a new subscriber
@andrewssoundsofthepast110 3 жыл бұрын
Thank you sir appreciate it
@danw6014 2 жыл бұрын
Haha. I broke the roll o matic off of a 4010 diesel too. Dropped in a county drain tile that washed out. We completely missed it mowing and raking because we used tractors with wide fronts and of course the hay covered it.
@andrewssoundsofthepast110 2 жыл бұрын
It’s was an experience
@megadeuz6148 3 жыл бұрын
Sooo,you bought a Frankenstein tractor. The best kind to have! That way,when you have to work on it, you'll have loads of fun finding parts for it.
@andrewssoundsofthepast110 3 жыл бұрын
I built it so I know what every part is off of
@garygrandadam7849 3 жыл бұрын
Love the old girls in their work cloths.
@andrewssoundsofthepast110 3 жыл бұрын
Thanks original is my favorite
@lonnierieker559 3 жыл бұрын
I got a 1961 dad bought it in 1965 diesel 4010 it was the big horse back then also have a1970 4020 diesel the 4010 has been engine been completely rebuilt bored big cam runs great but not enough radiator for extra horsepower now it’s main use to run 10 inch by 60 foot grain auger in fall
@andrewssoundsofthepast110 3 жыл бұрын
They still are great tractors
@jeremyfreeman717 3 жыл бұрын
What was that front pully for. Any water pump mods
@andrewssoundsofthepast110 3 жыл бұрын
The pulley is off the combine motor I just machined it. I’m doing another right now and we’re going to try to modify the water pump so I can use a factory fan this one I used a Napa flex fan and made spacers
@RustyCarnahan 3 жыл бұрын
I'm actually going to do a video that's essentially "The rest of the story" on the Meigs County Curse, aka MoJohn.
@andrewssoundsofthepast110 3 жыл бұрын
That would be awesome to hear and be documented
@RustyCarnahan 3 жыл бұрын
Might even get Dad talked into yapping on camera about it.
@andrewssoundsofthepast110 3 жыл бұрын
Haha perfect
@chadkalina1257 3 жыл бұрын
Been record and has a bigger core in it
@clarkeseymour4684 3 жыл бұрын
It still sound like a John Deere should.
@chadkalina1257 3 жыл бұрын
No the temp gets that high dad had it on the dino and it was tuning 130 and he had it turned down to 100hp
@andrewssoundsofthepast110 3 жыл бұрын
Yeah I’ve never had it that high is your radiator clean
@tysonconner3525 3 жыл бұрын
I didn't know that 7700 had a rotary pump I put one in my 4020 had the inline A pump
@andrewssoundsofthepast110 3 жыл бұрын
I believe the earlier ones had the rotary pump non turbo
@matthewfischer5328 3 жыл бұрын
What model Donaldson air canister is that?
@andrewssoundsofthepast110 3 жыл бұрын
I’ll have to look when I get to the farm
@andrewssoundsofthepast110 3 жыл бұрын
If I were to do it again I’m not sure I’d use it it’s really snug in there and don’t get enough air across the radiator
@andrewssoundsofthepast110 3 жыл бұрын
I can’t read the housing number but the filter is P870522 if i find the emails from Donaldson I will let you know
@sodbuster518able 11 ай бұрын
Needs a rain cap on the exhaust
@andrewssoundsofthepast110 11 ай бұрын
Right again it does but normally my stuff don’t sit outside
@demontrain4438 3 жыл бұрын
Your 4010 has a lot more power than your 4040 fyi. Unless the pump has been tuned.
@andrewssoundsofthepast110 3 жыл бұрын
I’d say engine power to engine power they are very close the 4010 is 115 the 4040 should be right there too. The 18.4 38 on the 4040 consume more power. I pull a 4 bottom f145 plow the 4010 with 16.9 I can pull 6th gear 4040 I can get 4th but it’s much faster then 4010 4th gear
@chadkalina1257 3 жыл бұрын
Can you help me my dad has a 68 4020 that was gas and my dad repowered it with a 74 7700 combine and it wants to run warm I can send pics if it helps
@andrewssoundsofthepast110 3 жыл бұрын
Is it turbocharged
@chadkalina1257 3 жыл бұрын
No it is not
@chadkalina1257 3 жыл бұрын
Changed out the air cleaner from the gas to the diesel one but haven't had a chance to try it in the field
@andrewssoundsofthepast110 3 жыл бұрын
@@chadkalina1257 you’ll need a diesel one for flow. How did you do your fan
@chadkalina1257 3 жыл бұрын
@@andrewssoundsofthepast110 we put the bigger one on and it's all stock 4020 diesel parts I just went through it and fixed what the first mechanic did wrong
@statefarm9998 2 жыл бұрын
Cool tractor, but ummmm sir your hood emblems are backwards 🤭
@andrewssoundsofthepast110 2 жыл бұрын
They are decals. Came on the hood that way
@statefarm9998 2 жыл бұрын
@@andrewssoundsofthepast110 I understand, once those go on its about impossible to get them off without destroying them. Still an awesome setup
@andrewssoundsofthepast110 2 жыл бұрын
@@statefarm9998 right after I built the tractor my grandpa hit a tree disking. So i had to get a new hood from a buddy. The price was right so it went on. The other was really nice
@sodbuster518able 11 ай бұрын
Rh John Deere hood badge is on wrong side
@andrewssoundsofthepast110 11 ай бұрын
Yep your right and it’s a sticker
@josephsmith6415 Жыл бұрын
That's a 4000 rearend
@andrewssoundsofthepast110 Жыл бұрын
How do you figure