No video
John Deere 62C Mower Deck Repair Part 1
Рет қаралды 4,456
Күн бұрынThis video shows the 62C mower deck repairs required to have it operational again. The deck was in pretty sad shape and required a couple of custom modifications.
@machone7580 19 күн бұрын
Gage wheel axels can be repaired without buying new. When you buy the gage wheel kits, they fit many tractors so they come with an axel in the kit. You take the existing one, cut it off and drill out the remainder. Then you can BOLT new axels on with the new gage wheel.
@mikeschlup5279 Жыл бұрын
That deck underside is a perfect candidate for POR 15. POWER WASH, degrease it...wire brush on a drill then phosphoric acid soak it...let it dry. Brief rinse. POR 15 .. the paint will last maybe 200 hours of mowing..
@johnwargo2590 3 жыл бұрын
Another option I've done on worn holes is weld up the worn area and re-drill/grind it. If you want to get real fancy (and you have access to stellite rod) is weld it with something harder than steel and it'll never wear out again.
@gotdeeres 3 жыл бұрын
Yes that is a GOOD option. I did think about doing that. The replacement grommets were so expensive I went the cheap route. There are also inserts that you can weld around and then do not need to drill. I took the easy route, which turned out to be good. I always like to get other peoples comments, so I can learn NEW methods I am not aware of.
@johnwargo2590 3 жыл бұрын
@@gotdeeres There's always more than one way to skin a cat. Generally I prefer not to thin wall out the base material. You can also add weld material to the outside to maintain same wall thickness (if space allows) and then open up the hole. I've turned polyurethane on a lathe to make replacements with a bit more durometer than rubber.
@gotdeeres 3 жыл бұрын
@@johnwargo2590 I actually thought the oversize bushing/ hose was more of a shock absorbing connection. Thanks for your INTELLIgent comment.
Frederick Dunn
Рет қаралды 14 М.
Woodchuck Russ the Deck Dr
Рет қаралды 1 МЛН