JOHN DEERE 6R150 FIRST DRIVE!
Рет қаралды 37,809
Жыл бұрынBECOME A JM FARMING MEMBER!
/ @jmfarming
Hi guys, my name is Josh and I work at North Wyke, a Mid-Devon Agricultural Research Institute farming nearly 700 acres with a mix of Beef, Sheep, and Arable. I hope you enjoy the videos, I try to make them informational but also entertaining for you all.
THE KIT I USE:
Camera 🎥 Go Pro Hero 10
Mic 🎤 Rode Videomicro
Drone 🚁 DJI Mavic Air 2
Editing 💻 Adobe Premiere Pro
Accessories:
Joby GorillaPod Tripod 3K
Foevvercam Magnetic Camera Mount
Find it all here - amzn.to/3FVbqjT
🚜 Follow Me 🚜
TikTok 🚜 www.tiktok.com/@jmfarming?lan...
Instagram 🚜 / jm.farming
Facebook 🚜 / jmfarming.yt
Twitter 🚜 / jmfarming
Snapchat 🚜 jmfarming
Merch - jmfarming.myshopify.com/
Music - www.epidemicsound.com/referra...
All views are my own.
@ThePloughMan117 Жыл бұрын
You wouldn’t need the foot throttle pulling out of junctions push the joystick all the way forward till it clicks then it’ll send you straight to 50kph just like mashing you’re foot of the throttle got command pro on my 6r215 great video as always! Keep promoting the southwest 💪🏻
@JMFarming Жыл бұрын
Ahh ok! I’m assuming you wouldn’t want to be without it now? Thanks bud! Will do!
@ThePloughMan117 Жыл бұрын
@@JMFarming having a 8345r and a 7530 on auto power I really gone off it and really prefer the command pro
@GRS1903 Жыл бұрын
All buttons and electrics soon have to be a rocket scientist to start them😂
@JMFarming Жыл бұрын
Yes, I wouldn’t say it would be a jump in and drive machine for everyone. An operators machine!
@stephenhoover4095 Жыл бұрын
The first time I got to run a command pro it to me a few seconds to get it into drive. John Deere is still easier to figure out than fendt tractors.
@GRS1903 Жыл бұрын
It’s amazing the technology over the last 10 years even,
@SAB_Agri Жыл бұрын
vy nice wee tractor Josh for a Deere 👍👍🤙🤙
@JMFarming Жыл бұрын
Awesome machine! Can’t fault anything on it!
@tonifuller8962 Жыл бұрын
Great video Josh thanks for sharing
@JMFarming Жыл бұрын
Thanks as always Toni!
@johnthompson982 Жыл бұрын
Awesome video Josh
@JMFarming Жыл бұрын
Thanks John! 🤙🏼
@paddy294 Жыл бұрын
Cracking video as always. John Deere looks a powerful job. Dr Phil certainly likes it
@JMFarming Жыл бұрын
Dr is a big fan! Thanks Paddy! 🙌🏼
@John-ng2vg Жыл бұрын
Hi Josh did you like playing in the new big boots too complicated for me to many screen's and buttons, Phil liked it I think. I'm going to sit in one of them at the show in a few weeks time I hope. Sunday night now late coffee but better late than never great stuff take care
@JMFarming Жыл бұрын
Yeah! Always fun to have a go in something new! I love the technology on them! Enjoy the shows, and your Sunday night!
@sandymcghee3328 Жыл бұрын
Another great video josh nice to see Dr. Phil helping you josh what the hell was Dr. Phil doing 🦌👍👍👍👍
@JMFarming Жыл бұрын
Thanks Sandy! I often wonder what hes doing!
@sandymcghee3328 Жыл бұрын
@@JMFarming you are right there josh 👍👍
@robbrist8839 10 ай бұрын
“Creep” doesn’t require a press of the unlock button, it’s the only initiation of movement using the joystick that doesn’t. What I like about that is it acts as a safety feature, by not pressing the unlock button you’re limiting the functionality of the joystick to creep only, which is nice when you have people and things around you.
@JMFarming 10 ай бұрын
This is why I love KZfaq comments, I didn’t know that! How brilliant is that though!
@TomaszDziedzic54 9 ай бұрын
😊
@2626stephen Жыл бұрын
Dr phill getting the hang of modern tec ?? command pro something new for you to play with. Nice one Josh
@JMFarming Жыл бұрын
He is indeed! He likes the tech! Was nice to have a go with!
@paulthompson8467 Жыл бұрын
Good video Josh the JD seems a very user-friendly machine I drove a fendt 716 yesterday with a new develon 14ton digger on behind for a friend who's cleaning ditches out for us took me a while to get the hang of it but what a nice machine 👍
@JMFarming Жыл бұрын
I am still yet to have a go on a Fendt! Hopefully get a go one day!
@paulthompson8467 Жыл бұрын
@@JMFarming they really are awesome 👍
@MargaretDrummond-us5lx Жыл бұрын
Can't beat the command pro joystick it's the way forward wee have 1 on Ower 215r
@JMFarming Жыл бұрын
I think it’s the way!
@Jack-jb4ri Жыл бұрын
On the road I just use accelerator and then in the field I use the command pro stick I feel on the road the tractor will rev up quite a lot on the stick when slowing down going at high speeds
@JMFarming Жыл бұрын
Makes sense! I think it just uses engine braking to slow itself on the stick?
@davidcummins1108 Жыл бұрын
It’s a case of if you like it or you don’t. I think most people do seem to like the CommandPro once you spend time getting use to it. Biggest problem is the cost of one of there brand new at the moment. Crazy the increase in prices in the last 3 years especially. Great video as always Josh.
@JMFarming Жыл бұрын
Yes I can imagine after using it for a while it’ll become second nature! As always a 24 hour demo doesn’t really give you the best view of it. Silly money for machinery, can’t see how any of it is justified!
@davidcummins1108 Жыл бұрын
@@JMFarming I know a lad who has a 2020 6120m and went to trade it in for a new 6120m this year and list price has gone up €30k in 3 years for the same spec 😳. There is definitely some price gouging going on with manufacturers still and it’s not justifiable.
@michaelsparke2811 Жыл бұрын
We run a 6155R command pro would definitely never go back to any other gearbox. Brilliant in every application road or field and pulls like a tank.
@JMFarming Жыл бұрын
I think if I had more than a week on one I would feel the same!
@Happyfarmer595 Жыл бұрын
We have a 19’ 6145 auto power with the stubby stick it we use it on the feeder wagon and allocate all wagon spools to the itec joystick didn’t like the command pro one
@JMFarming Жыл бұрын
Ah that’s interesting! I would have so much more use for that joystick on mine if it would allow isobus functions!
@Happyfarmer595 Жыл бұрын
@@JMFarming yes ours is isobus so if and when it will go on the rake or JD sprayer
@PaddyGun Жыл бұрын
Ivt transmissions are the way forward, I imagine once you get used to them you'd never go back
@JMFarming Жыл бұрын
I would have thought so!
@gerry6420 Жыл бұрын
I drive on the stick in the field and on road I use the pedal. Find it works best that way
@JMFarming Жыл бұрын
That would be the way I would do it I think! Thanks Gerry! Also…love the videos 😊
@Bazzaa_wlt Жыл бұрын
Although Deere is getting better with the user interfaces, they’re starting to become space ships like the fendts 😂
@JMFarming Жыл бұрын
Brilliant once you know your way around them though! 🤙🏼
@willyfindlay4398 Жыл бұрын
Love Dr Phil plugging his Channel while filming on your Channel, you just can't get the staff these days. Lol😅😅😊
@JMFarming Жыл бұрын
Gotta share the love with the Dr!
@benlulham8217 Жыл бұрын
Great video.
@JMFarming Жыл бұрын
Thanks Ben! 🤙🏼
@antonyfarming Жыл бұрын
Great video 👍 looks great other than price tag ill never be able to afford 😭
@JMFarming Жыл бұрын
All machinery is becoming a bit silly!
@lennonhorbury Жыл бұрын
my mates got one and its a beautie i still like my 6155r
@JMFarming Жыл бұрын
I like the 155 too! Longer wheelbase!
@RajBhavanKumar Жыл бұрын
good
@bekabeka71 11 ай бұрын
That tractor probably costs more than an apartment in my country 😂
@JMFarming 11 ай бұрын
And here too!
@robertdevries5322 Жыл бұрын
I drive a fendt on the stick and I am not going back
@JMFarming Жыл бұрын
Haha! I’ve never had a go in one, it’s on my bucket list!
@GOLTURBO555 Ай бұрын
4 cyl? Why God why??????
@elsaascensao1342 Жыл бұрын
Your top window is broken
@GOLTURBO555 Ай бұрын
Almost a toy. Cheap plastic all over the place
@WS_Farming Жыл бұрын
I own a 6150r and it a lovely tractor.
@JMFarming Жыл бұрын
Can’t complain it was very nice!
BalcevMMA_BOXING
Рет қаралды 4,4 МЛН
Tractor Time with Tim
Рет қаралды 25 М.
7810 Diaries
Рет қаралды 142 М.
Мастерская Синдиката
Рет қаралды 3,6 МЛН
OYBOY
Рет қаралды 244 М.