had some people asking for this video. hope it helps!
Пікірлер: 43
@simpleman41967 ай бұрын
Thanks a lot for this video. Last year I bought a two row John Deere planter with new precision meters and planted corn and sunflowers and pumpkins. Had issues with the pumpkins as I planted several varieties with seeds from small to very big. I have separate meters for corn sunflowers and pumpkins. I knew absolutely nothing about the meters this video was exactly what I needed
@dimonfallout101 Жыл бұрын
Great video, Jon! That's really useful and helpful. Everything explained straight and simple. The best part is when you exposed the pick up unit and shown the priciple of finger work. I bet not every farmer who worked with these finger-type meters knew the exact way it runs (i didn't =D ). Best regards from Kazakhstan!)
@jonstevensmaplegrovefarms3754 Жыл бұрын
Oh wow you really had to travel to get here. Thank you for the kind words. How are things in your part of the world
@SPINPOSI4 жыл бұрын
I've farmed for 10 years and I learned from you today, Thank you!
@jonstevensmaplegrovefarms37544 жыл бұрын
Lol. Thanks. Good luck this spring!
@veesercattleco.41114 жыл бұрын
This was very helpful Jon. Thank you kindly!👍👍👍
@jonstevensmaplegrovefarms37544 жыл бұрын
Gladly! Thanks.
@riesgs01 Жыл бұрын
Great Video!! Well done and informative
@jonstevensmaplegrovefarms3754 Жыл бұрын
Thanks
@mbmrc52415 жыл бұрын
So, just kind of a dumb question. As someone who works at a precision dealership. How do you set the correct tension with the main nut if you don’t have a test stand. I’ve ran hundreds of finger meters and I know for a fact with out a test stand I could not get them set correctly. Often times I’ll even mark the nut and count revolutions when I tear them apart (for a good starting point once they’re back together.) an it could still be anywhere from 1/32 of a turn to 1/4 of a turn off. Which if you know anything about finger meters 1/4 of a turn is pretty substantial.
@jonstevensmaplegrovefarms37545 жыл бұрын
we never had meter test stands at the dealers. we tighten them by hand and feel sometimes use an inch pound torque wrench. yeah a 1/4 turn is huge. the last group I did I took and ran them on a stand. 6 out of 8 were "perfect" the other two were just a little off, technically a finger unit would be calibrated for each seed, go from small flat to large round. so just find that good spot to do a good job with all seeds.
@mrbill41876 жыл бұрын
I watched a video a few years ago with the inventor, Eugene Keeton. He said he pitched it to international first but they were certain there cyclo was the way to go so he went to John Deere. He said he got the idea seeing corn kernels stuck in the corner of his combine grain tank.
@mrbill41876 жыл бұрын
kzfaq.info/get/bejne/a6qUoN2cz8ernps.html
@gianniedgar89402 жыл бұрын
You all probably dont give a shit but does any of you know a tool to get back into an instagram account..? I was stupid lost the password. I would appreciate any tricks you can offer me!
@ezekieldarian84212 жыл бұрын
@Gianni Edgar instablaster :)
@gianniedgar89402 жыл бұрын
@Ezekiel Darian I really appreciate your reply. I got to the site on google and I'm in the hacking process now. I see it takes a while so I will reply here later with my results.
@gianniedgar89402 жыл бұрын
@Ezekiel Darian It did the trick and I finally got access to my account again. I'm so happy! Thanks so much, you saved my account !
@skyfish256 жыл бұрын
Must be snowing out. I think your still running a White? I’m running a 6100, just didn’t feel this was year to upgrade. Like your videos. I’m starting to think you taking time off work extended winter...I’m sure your ready to roll when weather is fit.
@jonstevensmaplegrovefarms37546 жыл бұрын
Chad Fisher we got lucky with the snow missing us. only got several inches. south and east of us they got 20 inches. not quite ready but 100 times more ready then if i was still at work. last year i liked my 9000 series white. this spring getting it ready I loved it. inspect seed plate and brush and we are done!!!
@bergerjay99542 ай бұрын
👌👍
@TheBnbonthebeach Жыл бұрын
Very interesting
@KrazyKajun602 Жыл бұрын
I know nothing about finger type planters, I am used to plates. So I am looking to buy a 2 row JD unit with 7100 planters. What do you do if you wish to plant other things like sunflowers, green beans, or other type seeds.
@jonstevensmaplegrovefarms3754 Жыл бұрын
Any seed large like corn, beans,peas,, sunflowers...is ok, tiny seeds is tough.
@brianhirschmann49884 жыл бұрын
Great video. I have a 1240 John Deere planter. Where can I find new finger pick up units for it?
@jonstevensmaplegrovefarms37544 жыл бұрын
Good question. Can you get them from deere or shoup?
@brianhirschmann49884 жыл бұрын
@@jonstevensmaplegrovefarms3754 I was hoping you would be able to tell us lol
@matthewworkin40942 жыл бұрын
Any chance you'd have a picture of the soybean population and sprocket setup from the manual? Thanks
@jonstevensmaplegrovefarms37542 жыл бұрын
I do not
@markriegler4305 жыл бұрын
How many acres can you do before it needs to be recalibrated?
@jonstevensmaplegrovefarms37545 жыл бұрын
When I was at deere we did them each spring for guys. Some guys got 50 aces and some got 200 per row.
@jonstevensmaplegrovefarms37545 жыл бұрын
On the new test stands you can get it to read perfect with medium rounds. But as soon as you change shape or size the opportunity of some skips and doubles can increase. They were good simple meters that did all seed sizes well!
@carelstrumpfer92742 жыл бұрын
Im from South Africa 🇿🇦 can where can i order the precision finger meters? On a jhon deer N7200 planter
@jonstevensmaplegrovefarms37542 жыл бұрын
Shoupparts.com?
@johnvernon63284 жыл бұрын
just bought a 1240
@grantmcmillan16963 жыл бұрын
where would a person be able to order these units?
@jonstevensmaplegrovefarms37543 жыл бұрын
Shoupparts.com
@aarongoeppner413 Жыл бұрын
Do you have bean meters for your planter??
@jonstevensmaplegrovefarms3754 Жыл бұрын
No, the white uses a different seed plate for each type of seed,
@aarongoeppner413 Жыл бұрын
@@jonstevensmaplegrovefarms3754what do you mean by that??
@jonstevensmaplegrovefarms3754 Жыл бұрын
My old planter had a corn seed meter assembly, and then you change that out for a soybean seed meter assembly. This white planter you use the same meter housing and everything there's just a different seed plate. So if you want to plant corn, soybeans, wheat, sugar beets. No matter what scene you want to plant it's the same meter housing you just have a different plate
@jonstevensmaplegrovefarms3754 Жыл бұрын
@aarongoeppner413 maybe some of the confusion is that this video is older and since then I picked up a white planter, On my John deere I had the factory bean cups than later put E set precision meters on. Made a much better bean planter