Picked up a John Deere G. 1952 model. A few issues that need attention, but overall, a really nice tractor.
Пікірлер: 75
@keithkuckler25513 ай бұрын
I had an A, 60, 720,435, 4010, 3010, 3020, 4020, and a 2440, but, my favorite was a mint 530 that I bought from the original owner, now that was a sweet two cylinder
@jonelsonster3 ай бұрын
Very cool.
@RealJohnWayne2 жыл бұрын
Sweet G !! "Nothing Runs Like A Deere" 🦌👍🇺🇸
@corey-em8kn2 жыл бұрын
just bought 2 Gs in thr same shape, got em both for 7 grand, around here(iowa) hard to find a decent G, and average oice here is 5500 and up. always wanted a G now I have 2!!
@alanstrong558 ай бұрын
Those tractors get "pig dirty" just due to overall circumstances. Mud, dust, sand, and the like. You got a winner. Back then, farm profits were all so much better than today. Big Bad John rides again!
@jonelsonster8 ай бұрын
Thanks 👍 You make a good point!
@teddyhammack2195 Жыл бұрын
Nice oldies
@jonelsonster Жыл бұрын
Thanks!
@rudycarlson82452 жыл бұрын
Oh man does it sound good! Three grand for tractor like that in that condition is a good deal! Still expensive yes but for model G in that condition for $3000 is a good deal!
@randybreuer16852 жыл бұрын
I have a 1947 G , ran into the same problem with the fuel tank . I used POR 15 to clean and coat the tank . it's work great for the last ten years
@jonelsonster Жыл бұрын
Great advice!
@johndeere-yk6db2 жыл бұрын
We had an a that vibrated like that,couldn't figure it out. We figured it was because it had a bit of play in the slots on the crankshaft. We changed the crankshaft but it still had the vibration. I kind of liked it because when idled down it ran like a hit and miss engine. We could tell which tractor ours was in a line up of tractors.
@ConstanceKelly-ws1qr6 ай бұрын
When a glorious sound to hear one running & then attach a sickle mower. 😎
@jonelsonster6 ай бұрын
We don't have a mounted mower, but we do have some pull type plows that make it sound really good.
@MrEcm512 жыл бұрын
That’s a dandy G! I used to have one just like it. The serial number on mine was 55777. I wish now I hadn’t sold it. I like my model 70, but there’s nothing like a G. 😃
@boblackey12 жыл бұрын
70 has the same transmission as a G does it not. Not sure 70 was an improvement. A good G is a great tractor for it's size.
@MrEcm512 жыл бұрын
@@boblackey1 Yeah, the transmission is exactly the same on the 70 as it is on the model G. My 70 has the high/low lever on it. Only difference is that my 70 has live PTO. Both are excellent tractors. 😀
@boblackey12 жыл бұрын
@@MrEcm51 I've never driven a 70 but seen them and they pull good. This is me driving my uncle's 1947 G. He bought it new in July 1947. His son back on the wagon and two other sons own the farm now. kzfaq.info/get/bejne/g6qHnJea26jMcp8.html And one of my cousins running the 1947 G another day. kzfaq.info/get/bejne/la6Pf6uDps2ZfnU.html
@alphaone10110 ай бұрын
sounds great, looks great!
@jonelsonster10 ай бұрын
Thanks a lot!
@georgestirewalt85082 ай бұрын
$3,000 a good price for that G. Never seen one with a water pump. Great video thanks.
@jonelsonster2 ай бұрын
Thanks 👍
@robertboggs63999 ай бұрын
Wished I live in the country where I could own a John deere tractor. I love those pup pups . Bo
@jonelsonster9 ай бұрын
👍🏻
@DrEVIL-og4qv8 ай бұрын
Our Deere R diesel would bounce the front tires close to a HALF INCH at idle at the right speed. I guess they ALL do that. It, the R was my 10th Birthday present. Running that thing was about like putting a 5 gallon steel bucket over your head and having 4 or 5 friends beat the ever loving daylights out of that bucket with baseball bats. I disked 20 acres of ground to sow oats one afternoon, got done about 3-4 PM in the afternoon. Woke up twice that night with my ears still ringing. There was NO such thing as "Hearing Protection" back then. I don't remember Dad ever running it. Dad did run it 20 miles to his favorite Deere mechanic for a tune-up, almost a 2 hour trip both ways, 11 mph road gear. Township road commissioner bought it from Dad, still had 22 acres left to plow, quick job for our Super M-TA FARMALL. TOWNSHIP wanted the R to drag roads before oiling, and chewing up chunks of oiled dirt pavement scarified up with a heavy-duty rotoliller. That knocked the live PTO drivetrain out FOUR TIMES in Four years. DID DEERE field test the R at ALL? The 2 cylinder pony motor was in no way able to spin the diesel engine over more than one hole, maybe two, at a time. Not sure what happened to t 7:50 he R, nobody in our township would have bought it. Oh, no center main bearing on the diesel engine crankshaft of an R, Salesman told Dad NEVER LUG IT, when the crankshaft breaks just scrap the whole tractor. I spent most of the spring pulling an IH #8 3-14 plow in 3rd gear.
@jonelsonster8 ай бұрын
We have an R too. A very good old tractor.
@troybriannatyler49622 жыл бұрын
More videos on the G please! I’m redoing a 52 g
@LedgemereHeritageFarm2 жыл бұрын
That’s a beautiful tractor. I never could understand why Deere didn’t line up the air cleaner and exhaust like on the A&B though
@joshuabeck80602 жыл бұрын
Couldnt ever answer that but its so much nicer
@jonelsonster2 жыл бұрын
I don't know why they didn't line up the air breather or the exhaust either... But it's nice because it makes it really easy to differentiate an A and a G from a distance! Ha ha!
@LedgemereHeritageFarm2 жыл бұрын
@@jonelsonster that’s the truth. It’s how I can tell an A from. G. The B just looks tiny haha.
@MidwestFarmToys6 ай бұрын
Nice lookin
@jonelsonster6 ай бұрын
Thanks!
@keepcalmandfarmon54012 жыл бұрын
That is a nice looking G! Looking forward to the videos showing the fuel tank cleaning and fixing the vibration!
@jonelsonster2 жыл бұрын
We figured the vibration out pretty quickly. The flywheel timing marks were clocked two splines (80 degrees) from where they should be. Accessing the bolts on the back side of the flywheel was a bear, but we got it. And now it's fixed. Runs much smoother. Video should be out in the next week or so. Thanks for the comment.
@terrysamens1462 Жыл бұрын
G stands for gas guzzling Godzilla good golden general G
@jonelsonster Жыл бұрын
Ha! I've never heard that before. That's good.
@terrysamens1462 Жыл бұрын
@@jonelsonster good golden g. To lol
@wademizelle34333 ай бұрын
We have a JD D, is blowing oil out the exhaust, starts and runs perfect after you clean the plugs
@jonelsonster2 ай бұрын
Wow!
@anthonyhengst29083 ай бұрын
Sure looks and sounds good. Like you said, it needs a good cleaning out.
@jonelsonster3 ай бұрын
For sure!
@keltonwright72 жыл бұрын
What exactly do you mean by the vibration at the front? I own 2 2 Cylinders and both shake the front end like that at idle.
@jonelsonster2 жыл бұрын
The entire tractor vibrated, and not just at idle. Hard to see in the video, but very apparent when driving it. Turns out the flywheel was clocked 80 degrees from where it should be. There are counterweights on both the flywheel and the clutch to balance the engine. If they are not timed/aligned, you get the vibration we had. We had a similar issue with an AR we picked up earlier this year, except it was the clutch. Here is a link to that video: kzfaq.info/get/bejne/a8yCaMWQ08jInIU.html I should have a video out next week sometime showing what we found on this G. Thanks for watching and thanks for the comment!
@danw60146 ай бұрын
I believe the very late A, B, and G tractors had a distributor as new tractors.
@jonelsonster6 ай бұрын
Check out my video on magneto, distributor, and carburetor options. The literature shows the magneto continued to be an option on the model A, B, and G through the end of production. Here is the link: kzfaq.info/get/bejne/fb6SaZWazJOyfHk.html
@rudycarlson82452 жыл бұрын
One question I have about a tractor like that do you recommend non-ethanol gasoline For a tractor like that?
@jonelsonster2 жыл бұрын
We use ethanol free gasoline on anything that's going to sit with fuel in the tank or carburetor for long periods of time. Since ethanol, which is just alcohol, is water soluble, water and moisture will be absorbed and then promote rusting and corrosion within a fuel tank, carburetor, and the rest of the fuel system. I suspect that's what happened here. If you use the tractor daily and are constantly using fuel before moisture can be absorbed and cause corrosion, it's probably not an issue. But that's just my thought process. It's been several years since I've been in a chemistry class.
@rudycarlson82452 жыл бұрын
@@jonelsonster thanks
@br9401 Жыл бұрын
Nice
@jonelsonster Жыл бұрын
Thanks
@joescheller6680Ай бұрын
Late model Gs had distributers not coil. We had a 52 model. Grew up on it
@jonelsonsterАй бұрын
A distributor will still need a coil.
@williammatzek4660 Жыл бұрын
Do you have the stub shaft for hand starting ?
@jonelsonster Жыл бұрын
Nope. We have a hand crank for our LA and our M, but not for any of our horizontal 2 cylinders.
@SirenGuy711 Жыл бұрын
As you dad was pulling it in to the shop, was it running on 1 cylinder?
@jonelsonster Жыл бұрын
It was definitely idling rough, but I think it was still hitting on both cylinders.
@SirenGuy711 Жыл бұрын
@@jonelsonster Ok, Thanks👍
@johndeere-yk6db2 жыл бұрын
I thought by 1952 that all the frames were the later styled tractors with the stamped frames. Not disagreeing with the year of your tractor, just trying to figure out the true year of my A. The serial number on it is confusing because one place it go to says one thing and the next place says another. It is a later model A because it has the stamped frame but has the same transmission as the early styled.
@jonelsonster2 жыл бұрын
The model G never had a stamped steel frame. They never enclosed the flywheel or moved the starter to the underside of the tractor either. If your A has a stamped frame but still has the 3 speed transmission with hi/low, it's probably 47, 48, or 49. I think in 1950 the model A switched to the 1 stick transmission, square rear axle casting, and there are a couple other differences. But the model G never went to the pressed steel frame.
@johndeere-yk6db2 жыл бұрын
@@jonelsonster okay that explains never seeing a G with the stamped frame. The guy that sold me my A said it was a 1950 but I didn't think that it was because the A that I grew up on was a 1950 and that had the one stick shifter.
@johndeere-yk6db2 жыл бұрын
Thank you for the help on finding the year of my A though it gets me closer than I was searching the serial number.i had me from 1950 to 1955. Never once got the earlier years.
@johndeeregfan2 жыл бұрын
The model A underwent the most facelifts of any letter series John Deere tractor. If you have a parts book you’ll see the serial number breaks of all the changes they did concerning parts. It can be rather confusing.
@briceboehning2 жыл бұрын
Pretty much stole it for 3k, great buy!
@jonelsonster Жыл бұрын
Thanks for the encouragement!
@davidparris7774 Жыл бұрын
Tractor should have a DLTX51
@jonelsonster Жыл бұрын
Yes, we have a big but carburetor. Right now we have it running with the DLTX 71. They'll run fine on either.
@toddgittins56928 ай бұрын
Paid top $. It is nice.
@jonelsonster8 ай бұрын
Thanks
@tysonernst9657 Жыл бұрын
That tractor is a All fuel....why not use the smaller gas tank...that things made to run on bad gas.......your only running on one cylinder
@jonelsonster Жыл бұрын
Yes, we ended up needing to address several issues we found. Fuel and ignition systems were both overhauled.
@ptnelsonster2 жыл бұрын
Can’t wait to see the G in action in front of a plow!
@jonelsonster2 жыл бұрын
Yeah, it'll be fun. But we'll need to find a bigger plow. We have three 2 bottom trip plows and a couple of single bottom plows. Hopefully someone in the club will let us borrow a 3 bottom plow.
@georgestirewalt85082 ай бұрын
$3,000 a good price for that G. Never seen one with a water pump. Great video thanks.