John Deere Race Mower Rebuild part 1!!

Рет қаралды 29,977

mycustomgokart

4 ай бұрын

Shirts - mycustomgokart.com

Пікірлер: 89

@hansiminator69 4 ай бұрын

Let’s be honest… we all want one lol

@BlakeWagner-zt3mo 4 ай бұрын

I have one

@theegwana2103 4 ай бұрын

If ya want 1 build 1 there’s plenty of step by step diy videos on KZfaq Gazza garage is a good watch for building I’m currently building a race mower and race track and registering a nz club I might do a couple videos of my builds I’m a automotive machinist so everything will be professionally built cool videos this dude doing

@tangster6304 3 ай бұрын

I’m working on one myself

@R.A.W.R.NEWS.T.V.1776 3 ай бұрын

I want to put green lights on mine end chrome rims they got to be gold yellow Chrome and do the body chrome green almost like the John Deere Green but do it like a color shift make lights definitely

@theegwana2103 3 ай бұрын

I’ve added a couple of videos of my current build I will do more vids if people are interested in watching

@coltonprince9466 4 ай бұрын

Im working on a racing mower right now and Im using this as inspiration. love how clean it is, great job

@larryslade4117 4 ай бұрын

Simply brilliant! Like that you mention the reuse/repurposing of parts. Your builds are most creative…fun to see, thanks!

@evicdes728 4 ай бұрын

Goes to show what a simple mundane thing like a lawnmower, a welder, and a little bit of imagination can do. I am in the process working on my own rat rod mower. I’ve had a blast every step of the way truly is a special community can’t wait to be apart of the custom lawn mower crowd 😎🤙🏻🤙🏻

@sed6 4 ай бұрын

So glad to see you revisit this! Your first video inspired me to make one myself. I'm still in the process, it's going well!

@cwfarms6450 4 ай бұрын

Did this to a 170 after seeing yours for inspiration. Blew the gearbox up after 2 days. I’m surprised yours had held up.

@S15GYPSY128 4 ай бұрын

Awesome build DUDE!!👍👍👍

@Dantheman5127 4 ай бұрын

9:29 that TIG is looking nice!

@TildeKei Ай бұрын

headlights and brake lights would be sick.

@A1i3N337 14 күн бұрын

I fixed a craftsman riding mower (with a B&S engine) that had a popped valve seat just like yours. I used a punch and peened the case over the edge of the ring. The mower has worked for years since I fixed it. The seat pops out due to overheating

@user-sy1tg2qs6y 4 ай бұрын

I'm trying to pulley swap my mower, I have a john Deere like yours but I can't find a front pulley that fits in the front on the engine can you recommend me a pulley that will fit

@mofostopheles 4 ай бұрын

You’re a great inspiration!

@AndrewJSimpson 2 ай бұрын

Had the valve seat come out on me as well. I just jammed it back in and then dot punch around it to hold it in place. Raced it about 6 times since then and it's still going strong.

@DetailDane 4 ай бұрын

We Live in the Same Town, Let's Collab On doing some Paint Work on It! Love the Content! 🎥🔥

@joshpiotrowski3487 2 ай бұрын

If you take a snow brush to your board and bindings before you bring it in it won't melt all over the shop floor

@FireNinja7365 4 ай бұрын

Can't wait for part 2

@moomoomeadows7526 4 ай бұрын

17 hp, i can say i have a stronger crappier racing mower than these guys after i finish mine, Awesome content, your videos have inspired me to fix my old racing mower so many times, and have helped inspire me to build the one i am building now, Keep up the good work

@spudstudios3342 4 ай бұрын

needs steel pulleys, those cast aluminum ones love to break, and bypass the gov for more control and speed

@Ieatpeople2 3 ай бұрын

my yard is barely big enough to need a push mower, but i wanna build one of these lol

@DustinStruckman 3 ай бұрын

im learning how ro weld too. Your welds are better than mine lol. i just bought a TIG welder to practice. Also Im going back to school on welding Fundamentals

@SimonSaysNL 4 ай бұрын

Nice bro! Maybe want to build something like this but i don't have a shop or garage? Also limited by tools etc. like i dont have a weldingmachine. Any tips maybe?

@reesemolloy6109 4 ай бұрын

Get a craftsman mower if you want to lower it for the rear you just flip the brackets same for the front and they are super common

@jf6401 4 ай бұрын

You should add a after market slide carb

@teeranoptinoempremsilapa7731 Ай бұрын

love your videos! 🏎

@collinprice57 3 ай бұрын

what pulleys were you running? i got a 111 but not sure on what sizes to go with

@user-yo3lx5mh4g 3 ай бұрын

How is the seat mounted to the body or frame. Building my own almost finished.

@TheJwdude 2 ай бұрын

i would like to see you wire lights to your John deer race mower so you can correctly ride it at night if you take the john deer race mower out at night again

@user-oc7sj5rp2j 3 ай бұрын

Those motors are known for that if you horse on them to hard that happens and yes you can put it back in and go again use red locktite it helps it stay in

@Kalle.Thomsen 4 ай бұрын

🔥🔥🔥

@StreetRacingR34 4 ай бұрын

What transmission are you using?

@lanceloomis1337 19 күн бұрын

...so what are your pully ratios...size on engine & size on trans??

@maxmerritt7220 4 ай бұрын

Love it

@ferrondelange 4 ай бұрын

Fit a led bar in the slid in the hood for night riding

@charliemclaughlin1042 3 ай бұрын

I wish i still had my 1963 110

@Motonetracingteam 4 ай бұрын

how do you make the foot throttle? ive been very intrested in one of those

@reesemolloy6109 4 ай бұрын

Peddle attracted to a universal throttle cable and you cut it so it fits on the throttle piece good

@ferrondelange 4 ай бұрын

Guys get him to the 100k subsribers

@sp4604 4 ай бұрын

just saw another video some dude in europe did the same thing. he put a race exhaust on it on the back. its on youtube. hes a master fabricator

@EricClark-io7rf 3 ай бұрын

Ok thx, Iam inspired

@MINItraktor196 4 ай бұрын

😎👍

@tractorboi124 4 ай бұрын

I'm putting a 30hp briggs and stratton v-twin in my john deere 111

@august7324 4 ай бұрын

I did the same last year and even with the belt tight as a bowstring it still slipped

@chardierharper8382 4 ай бұрын

What size pulley do you have?

@racerturner4053 4 ай бұрын

First

@gamervaze3000 4 ай бұрын

congrats

@richardhead3211 4 ай бұрын

you are the man

@OscZip 4 ай бұрын

bro how did you do the camber?

@lynwoodjones 4 ай бұрын

😮

@barbarabrune7071 3 ай бұрын

You should get a twin 700 cc that would make for a good video

@JudeBaer332 3 ай бұрын

Is it a 2 wheel or 4 wheel

@louislouis2647 4 ай бұрын

Hey ! why there is an opening on the hood ? To cool the engine ?

@user-cc3gg6vd5g 4 ай бұрын

I juz got done building a 111 tjat looks like this 😂

@Joethebigbro Ай бұрын

yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch

@user-vl5kp1sy4u 2 күн бұрын

U mind telling me what type of engine this is?

@jaydendowdle3504 Ай бұрын

Did you have to take out the governor??

@Cord.. 4 ай бұрын

why dont you instal a mx bike low cc engine in the mower?

@eddieormanzhi5322 4 ай бұрын

What kind of welder do you use

@mycustomgokart 4 ай бұрын

Hobart 210

@ScoredYT 4 ай бұрын

whats it called?. i got inspired and i want that exact one but then modify it and make it like race and drift.Just like the one in the vid at 13:48 :)

@richardhead3211 4 ай бұрын

omg it is a intek

@gatorboots7608 3 ай бұрын

you can fix that valve seat. Look up "punching the head"

@ErdeCash 4 ай бұрын

what kind of peerless is that under it?

@spudstudios3342 4 ай бұрын

801

@ErdeCash 4 ай бұрын

@@spudstudios3342 thx. Its amazing how well the 801 handles the pulley swap and the speed.

@spudstudios3342 4 ай бұрын

@@ErdeCashthey have all steel gears like an 820, just smaller axles. they are very strong

@ErdeCash 4 ай бұрын

@@spudstudios3342 yeah i know. I have the same 801. We did a maintenance on it 2 years ago. All gears in perfect shape, no demage. Awesome transaxle. I was fascinated when i watched these videos and saw what it can do

@spudstudios3342 4 ай бұрын

@@ErdeCashahh, ok. Wish i could find one...