FallLine POLY Wear Edge & KFI Side Markers | POLARIS Sportsman Glacier PRO HD Plow

Рет қаралды 10,429

3 жыл бұрын

Sharing 2 NEW plowing upgrades on my XP1000 Hunter.
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
FALLline Poly Edge: amzn.to/3nIe1SK
KFI Markers: amzn.to/37G9wm5
66" PRO Blade: amzn.to/2G3ZeB6
66" Replacement Wear Bar: amzn.to/35Pe5JK
PRO Frame: amzn.to/3e2LYcq
ATV Mount: amzn.to/37KQwTJ
Power Pivot: amzn.to/3muvfSE
Plow Edge Deflector: amzn.to/2Ts3EFb
Polaris OEM Skid Shoes: amzn.to/2TxYc3z
The Best Detail Spray: amzn.to/3p2nWTq
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
+ & HERE! - / contemporaryhomestead
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
KZfaq Music Library

Пікірлер: 48

@danconlan8735 3 жыл бұрын

Nice job John! That will come in handy with the snow flying. Have a Merry Christmas and a safe NewYear! Thanks, DC

@JohnFrancoNH 3 жыл бұрын

Thanks, you too!

@wildmantann 8 ай бұрын

Thank you, i think this will help my situation.

@jetbikes1 Жыл бұрын

I’m cheap I use Used Conveyer Belt Rubber 3/8” thick behind the Wear Bar with no shoes ! Cut a piece around 4” wide by length of plow, center wear bar on Belt material drill holes , leave 3/4” hang down below wear bar install bolts and in joy the ride, less noise no rock catching , I use -2- 10 pound weights fastened to plow also , at end of season take Wear Bar off and turn Rubber Conveyor Belt over for a Second Season .

@dannywaits1711 3 жыл бұрын

Great review John! Very informative and detailed!

@JohnFrancoNH 3 жыл бұрын

Glad you liked it!

@RZRDunesandSnow 8 ай бұрын

Great stuff! Thx

@themusicman630 3 жыл бұрын

Really looking forward to the LED light install I really want to get them !

@JohnFrancoNH 3 жыл бұрын

Me too! Thanks for watching!

@davesaccount2884 2 жыл бұрын

How did the wear edge do after a year of use? I’ve been using a rubber wear edge from rubbercal and it’s done well on my 150’ driveway but my new home has a huge driveway around 475’ and it’s not going to last the season.

@jodytucker4474 3 жыл бұрын

Nice work man, and yes I agree with Polaris should do better with some of its parts!!

@JohnFrancoNH 3 жыл бұрын

No complaints besides the skids shoes. Wouldnt hurt for them to be commercial grade for longevity and to angle them properly so they sit parallel in contact with the ground. Hopefully Polaris will see this video.

@nikon_ftw Жыл бұрын

can you please let me know what size new bolts and flange nuts you used to compensate for the extra thickness of teh poly edge? thanks!

@kodepot7521 2 жыл бұрын

What do you spray on the drill bit before drilling? Is it to cool down the bit so it doesn't melt the poly? TIA

@SETTAPERFORMANCE Жыл бұрын

When using the poly blade I’m assuming you get rid of skid shoes as well right ? I feel like the skid shoes would do as much damage on black too etc as the metal edge on there plow ? Thanks

@robbo398 2 жыл бұрын

What size are the S.S. bolts that you used?

@jamesvieoletbird3050 Жыл бұрын

How did it hold up to a year of plowing? Did it stay somewhat flexible in the cold? I am plowing around a city block.

@colinstokes3826 11 ай бұрын

Did you completely get rid of the metal skids?

@moneypox2628 9 ай бұрын

Do you use your shoes on the plow?

@brent6342 7 ай бұрын

I just added this onto my new plow. It does work great however, not impressed with the durability of it, it is very apparent how much of the material has wore off already after the first couple plowing of driveways and sidewalks in my neighborhood. Just sharing my experience with it so far

@JohnFrancoNH 7 ай бұрын

Funny ive been going on the same poly edge for 3 years and i have an 800ft asphalt driveway. Havent flipped it yet. Steel or poly edge?

@brent6342 7 ай бұрын

@@JohnFrancoNH no idea why it’s wearing so fast. This is only after a few uses of it. I did plow a lot in my neighborhood but I figured it would hold up better

@brent6342 7 ай бұрын

I guess it won’t let me add a picture

@curtwarkentin2887 Жыл бұрын

I wonder if a machine shop could build a wear plate out of ar500 steel... the stuff gun targets are made from. It may cost a fortune but im betting itd last for years. I had to drill a hole through ar500 steel once to mount it to my target stand, that stuff ate many drill bits before i got a single hole drilled out lol.

@JohnFrancoNH Жыл бұрын

Haha gotta use a 100% tungsten carbide drill, big money. But the AR500 will beat the F out of your asphalt driveway. I went poly so it would be more gentle and not rip up the surface as much.

@wheelinndealin 3 жыл бұрын

Thanks for the tip on the kid shoes. I just put mine on and only have been through one storm, how has the whole setup lasted and what should I expect?

@JohnFrancoNH 3 жыл бұрын

Video coming soon with the new upgrades in action. Poly edge should last slightly longer then the traditional steel bar/skids. But offers better clean up and adds height which is nice. I still run the skids for extra protection just not as low. Because the outside corners of the plow always get worn more quickly then the center.

@wheelinndealin 3 жыл бұрын

@@JohnFrancoNH it’s funny I went out and checked my blade today and the factory edge is probably already worn down atleast an 1/8” on the outsides. That was only after one storm so now I’m a little worried

@JohnFrancoNH 3 жыл бұрын

@@wheelinndealin Yes...Keep an eye on it. Its very easy to think you have plenty of meat on there. But it goes quick. The factory wear bar can be flipped to achieve a new fresh edge.

@wheelinndealin 3 жыл бұрын

@@JohnFrancoNH thanks for the tips, I think I’m gonna go the same route you did and put the poly edge on

@mickey29359 3 жыл бұрын

Hey John I was thinking on buying a high density polyethylene 1” cutting board, cut with a hole saw and attach with epoxy to my stock Polaris skid shoes? Do you think this is worth a shot and if so what epoxy would you recommend thank you

@JohnFrancoNH 3 жыл бұрын

Thats a great idea but epoxy will not hold that on. I actually will be making larger custom skids with replaceable poly shoe and offering them for sale soon for polaris plows so stay tuned!

@Smodlee Жыл бұрын

Hey what pin hole do u have yours set at on the wear shoes?

@JohnFrancoNH Жыл бұрын

at the very top because of the extra height of the poly edge

@ScottieBMan 3 жыл бұрын

Man looks like I need to bust out the wallet again, great tip thanks, just just gonna blast through with shoes but this looks promising

@JohnFrancoNH 3 жыл бұрын

Yes poly edge is performing well so far with the snow. Have a plowing video coming soon with it in action.

@keithsams4301 3 жыл бұрын

Change the skid shoes to casters...pneumatic tires....last for ever...mine are going strong after 3 years

@JohnFrancoNH 3 жыл бұрын

I thought about that..my only concern is bulkiness & clearances on the back of the plow. Thanks for watching!

@realestatetutor353 7 ай бұрын

Why did you cut the poly and not leave an edge.?

@JohnFrancoNH 7 ай бұрын

its cut flush with ends. not sure i understand. like have it extended out the sides?

@realestatetutor353 7 ай бұрын

@@JohnFrancoNH yeah. Was there a reason you cut it flush? Im thinking having the poly stick out 1-1/2” on either side might be useful? Did you intentionally cut it flush?