1" Wheel Spacers = AWEsome! | POLARIS Sportsman XP 1000 & 850 ATV Mods
Рет қаралды 17,456
3 жыл бұрынInstalling a set of one inch 10x1.25mm Ebay wheel spacers front and rear. This widens the atv and makes it much more stable at all speeds. Especially if you have a lift kit on your machine!
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
1" Spacers: amzn.to/3owSwFh
MAXGTRS 881 LED Bulbs: amzn.to/2SZ44mc
Handlebar Grab Bar: amzn.to/3mlKI7o
The Best Detail Spray: amzn.to/3p2nWTq
Want to SUPPORT the Channel? Info & Links below!
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
& HERE! - / contemporaryhomestead
Stay tuned for more videos!
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
KZfaq Music Library
@davidh1314 3 жыл бұрын
Very nice! I might get those for my XP1000
@JohnFrancoNH 3 жыл бұрын
I love em..Thanks for watching!
@johns7809 3 жыл бұрын
Nice I have to of the 850s great Machines.
@JohnFrancoNH 3 жыл бұрын
I agree wish it had the 3 mode throttle switch like the XP 1000. Thanks for watching!
@lorijohnson9417 Жыл бұрын
Nice Corvette
@KuntryFried_ATV 2 жыл бұрын
Great video, thank you. Also what drill bit did you use at the end on the studs? Were you rounding the ends out? Thanks
@JohnFrancoNH 2 жыл бұрын
chamfering/deburring tool
@billkohnen5399 9 ай бұрын
What was the torque you used to put the spacer to the quad. Thanks in advance
@bigjay6743 11 ай бұрын
I had 1- 1/2 on mine I just took them off though didn't like the way it felt in the steering and plus I kept bottoming out really messes with your suspensions Genometry. I'm sure better shocks would fix this But as of now they're just sitting in the corner.
@stevebonnici8472 7 ай бұрын
Do you have to tune it at all with the lift and spacers?
@KuntryFried_ATV 2 жыл бұрын
After installing the spacers, are you still able to get your 850 on the back of your truck bed? I have an 850 as well and would like to install spacers but my only way to transport is the bed of my truck.
@JohnFrancoNH 2 жыл бұрын
the 850 yes the xp 1000 with 1" spacers and ITP 4+3 rim offset no go.
@chrislawson4019 3 жыл бұрын
What is the arched looking thing going from one side of the handle bar to the other side of the handle bar? Close to the speedo?
@JohnFrancoNH 3 жыл бұрын
Its a snowmobile mountain grab bar
@BuiltByMike 2 жыл бұрын
Nice zr1
@JohnFrancoNH 2 жыл бұрын
Thanks ✌️
@dannywaits1711 3 жыл бұрын
Definitely better looking
@JohnFrancoNH 3 жыл бұрын
Yes and best part more stable. Thanks for watching!
@wattyd6867 3 жыл бұрын
I'm curious to know what floor jack you have?
@JohnFrancoNH 3 жыл бұрын
The grey one is a Harbor freight low profile 2.5 ton. I also have a black/yellow craftsman 3 ton. Thanks for watching!
@flare4207 3 жыл бұрын
You can adjust the throttle on the xp 1000
@JohnFrancoNH 3 жыл бұрын
Really! Do you have any info on how?
@flare4207 3 жыл бұрын
@@JohnFrancoNH I don’t know how to but I will look into it I have seen and heard about people doing it but idk how they did it I think if u open up the throttle housing their are a few adjustments idk
@jvallow 3 жыл бұрын
Hey man, just picked up a 2021 850. Can we get a link to these, please? Thanks!
@JohnFrancoNH 3 жыл бұрын
www.ebay.com/itm/4-pcs-4x156-1-wheel-spacers-10x1-25-studs-Fits-2014-2019-Polaris-RZR-XP-silver/233421949183?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@middlehot 3 жыл бұрын
Why did we need to cut the stud on the spacer
@Twistedoff2 3 жыл бұрын
With the tires pushed out, do you get more debris on you?
@JohnFrancoNH 3 жыл бұрын
Not at all. Thanks for watching!
@1rustyshackelford 3 жыл бұрын
Do either of your machines have slop in the steering? My 2020 850 feels like tie rods are shot even though i have replaced them and they have zero play
@JohnFrancoNH 3 жыл бұрын
Yes i noticed that on both my machines. Even the brand new 850 has the same amount of slop in the steering. Very noticeable when the machine is off and you move the bars. Its coming from the electric power steering box. Very odd.
@1rustyshackelford 3 жыл бұрын
@@JohnFrancoNH Do you feel it through the handlebars when your riding?
@cmscustoms4400 3 жыл бұрын
Nice...I have same bike. What did you do for a lift kit? Do you have links to spacers, lift kit and led bulb? Thx
@JohnFrancoNH 3 жыл бұрын
Info is in the description of each video. Thanks for watching!
@cmscustoms4400 3 жыл бұрын
No....it just says you got them on eBay. No link. No description.
@cmscustoms4400 3 жыл бұрын
I’m looking for the wheel spacers specifically. It says you got them on eBay but there’s no link. Can you please provide a link? There are so many configurations online. Thank you!
@JohnFrancoNH 3 жыл бұрын
@@cmscustoms4400 www.ebay.com/itm/4-pcs-4x156-1-wheel-spacers-10x1-25-studs-Fits-2014-2019-Polaris-RZR-XP-silver/233421949183?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
@cmscustoms4400 3 жыл бұрын
That link is no longer avail. Must not be available anymore?
@user-fj7lq5ej5z Жыл бұрын
what spacers did you use if you dont mind me asking, i have a 2023 polaris sportsman 570 trail edition im having the same problem of balance with but i want to get the right ones so which do you suggest that will fit my bike?
@JohnFrancoNH Жыл бұрын
I forget where i got them. But i have the ones off my XP1000 for sale on ebay right now
@user-fj7lq5ej5z Жыл бұрын
@@JohnFrancoNH ok thank you, will they fit the 570 do you think? i mean the bolt pattern should be the same for the 570 850 1000 i would think because the only thing bigger is the motor i bet
@HeyItsAsmus Жыл бұрын
@@JohnFrancoNHwhy are you selling them? I have an xp 1000 ultimate trail and I’m thinking about doing the lift kit and the 1” spacer but I’m nervous the axles will be too steep..
@harjotlongia 2 жыл бұрын
Is anyone out there running 28" ITP Blackwaters on the stock 14" polaris alloy wheels?
@JohnFrancoNH 2 жыл бұрын
I find running larger and wider tires on stock rims to look really odd. Get some thing aftermarket or beadlocks with a lip or concave shape to it so theres less damage on rim face/spokes
@MichaelWilliams-if4qk 3 жыл бұрын
Where can I get that grab bar
@JohnFrancoNH 3 жыл бұрын
Check out my other videos i have the amazon links below the videos. Thanks for watching!
@hugostiglitz2388 Жыл бұрын
Ever think of a twist throttle? $20.00 will give the the kit which includes new grips.
@jrnybiz 2 жыл бұрын
What are the torque specs?
@JohnFrancoNH 2 жыл бұрын
Polaris recommends 75 ft. lbs. but no way! I torque mine to 65 ft lbs. evenly and in 2 stages
@jrnybiz 2 жыл бұрын
@@JohnFrancoNH thank you!
@biiggbry 3 жыл бұрын
why did you cut the studs ?
@JohnFrancoNH 3 жыл бұрын
Because these are utv sxs spacers and the lug nuts would not hold the wheel on otherwise. Thanks for watching!
@biiggbry 3 жыл бұрын
Are there any spacers on the market that you don't have to cut ?
@pOOlarisking Жыл бұрын
When that jack fails one day you could loose a toe
@JohnFrancoNH Жыл бұрын
i know my equipment, dont you worry
@dhamilton201 Жыл бұрын
Your wife's bike is better looking!
@JohnFrancoNH Жыл бұрын
LOL
John Franco
Рет қаралды 14 М.
John Franco
Рет қаралды 10 М.
Cool Items Official
Рет қаралды 56 МЛН
John Franco
Рет қаралды 28 М.
Redline's Garage
Рет қаралды 89 М.
TFLoffroad
Рет қаралды 21 М.
Athena's Garage
Рет қаралды 644
Polaris Off Road
Рет қаралды 20 М.
内山さんの日常 (Everyday Uchiyamasan)
Рет қаралды 25 МЛН
Parviz 070 Danc Master
Рет қаралды 10 МЛН
GLOBE 🌏
Рет қаралды 6 МЛН